Scribd
Upload
55 views

Answer All The Questions (5 X 2 10)

1. The document is a question paper for an internal assessment test in Strength of Materials. It contains 10 questions testing concepts related to torsion, springs, stresses in cylinders and shells. 2. The questions cover definitions of terms like torsion, hoop stress, thick and thin cylinders. They also include calculations of stresses, deflections, diameters and loads for problems involving springs, shafts and pressure vessels. 3. Students are required to show working for multi-part questions and select one question from options provided for some sections. The test aims to evaluate students' understanding of core Strength of Materials concepts.

Uploaded by

Robinson Prabu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
55 views

Answer All The Questions (5 X 2 10)

1. The document is a question paper for an internal assessment test in Strength of Materials. It contains 10 questions testing concepts related to torsion, springs, stresses in cylinders and shells. 2. The questions cover definitions of terms like torsion, hoop stress, thick and thin cylinders. They also include calculations of stresses, deflections, diameters and loads for problems involving springs, shafts and pressure vessels. 3. Students are required to show working for multi-part questions and select one question from options provided for some sections. The test aims to evaluate students' understanding of core Strength of Materials concepts.

Uploaded by

Robinson Prabu
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Sri Vidya College of Engineering and Technology

Virudhunagar – 626 005


Department of Mechanical Engineering

Question Paper for Internal Assessment Test II

Semester & Branch: III/ Mechanical Date: / 09 /2014


Subject Name: Strength of Materials Max. Marks: 50
Subject Code: CE6306 Max. Time: 90 mins
Part A
Answer all the questions (5 x 2 = 10)

1. Write down the equation of torsion showing the various terms involved in it.
2. Define torsion and give at least two practical example for it.
3. How do you classify a cylinder or a shell in to thick or thin?
4. Define circumferential and Hoop stress.
5. On what basis, a cylinder is considered as thin one?

PART – B (1 x 8 + 2 x 16 = 40)

6. Expression for central deflection of the closed coil spring.


(Or)
7. Expression for longitudinal stress.

8. A hollow shaft with diameter ratio 3/5 is required to transmit 450KW at 120 r.p.m. The shearing stress
in the shaft must not exceed 60 N/mm2 and the twist in a length of 2.5m is not to exceed 1o. Calculate
the minimum external diameter of the shaft. C = 80 KN/mm2.
(Or)
9. A closed coiled helical spring has stiffness of 10 N/mm; its length when fully compressed with adjacent
coils touching each other is 400mm; the modulus of rigidity of the material of the spring = 80GPa
a. Determine the wire diameter and mean coil diameter if their ratio is 1/10.
b. If the gap between any two adjacent coil is 2mm, what maximum load can be applied before the
spring becomes solid (ie) adjacent coils touch.
c. What is the corresponding maximum shear stress in the spring?

10. A cylindrical vessel whose ends are closed by means of rigid flange plated, is made steel plate 3mm
thick. The length and the internal diameter of the vessel are 50cm and 25cm respectively. Determine
the longitudinal and hoop stresses in the cylindrical vessel due to an internal fluid pressure of 3N/mm2.
Also calculate the increase in length, diameter and volume of the vessel. Take E=2x10 5 N/mm2 and μ =
0.3.
(Or)
11. A cylindrical shell 3 m long which is closed at the ends has an internal diameter 1m and a wall
thickness of 15 mm. Yong’s modulus 200GN/m2 and Poisson’s ratio = 0.3. Calculate the
circumferential and longitudinal stresses induced and also change in diameter and change in length of
the shell, if it is subjected to an internal pressure of 1.5 MN/m2.

STUDENTSFOCUS.COM
Answers

1. Torsion of circular shafts

Definition of Torsion: Consider a shaft rigidly clamped at one end and twisted at the other end by a torque
T = F.d applied in a plane perpendicular to the axis of the bar such a shaft is said to be in torsion.

2. Torsion

3. Thin cylinder and thick cylinder measuring


A cylinder with a diameter to thickness ratio of more than 20 is considered to be
thin. A ratio of less than 20 is considered to be thick.

4. Hoop stress

This is the stress which is set up in resisting the bursting effect of the applied pressure and can be most
conveniently treated by considering the equilibrium of the cylinder.

STUDENTSFOCUS.COM
5.

In the figure we have shown a one half of the cylinder. This cylinder is subjected to an internal
pressure p.

i.e. p = internal pressure

d = inside diametre

L = Length of the cylinder

t = thickness of the wall

5. cylinder is considered as thin one

STUDENTSFOCUS.COM
6. Expression for central deflection of the closed coil spring.

7. Expression for longitudinal stress.

STUDENTSFOCUS.COM
8.

STUDENTSFOCUS.COM
6

STUDENTSFOCUS.COM
9.

STUDENTSFOCUS.COM
10.

STUDENTSFOCUS.COM
9

STUDENTSFOCUS.COM
10

STUDENTSFOCUS.COM

You might also like