Wo r l d C l a s s P o w e r S o l u t i o n s

E x c e l l e n t Te c h n o l o g y , E f f i c i e n c y a n d Q u a l i t y

ADC
• Modular Rectifier System Technology
• Adaptable, Robust, Efficient
• Suitable for Telecom and Industrial Applications
 [V/C]
boost charging / lead acid batteries

float charging / lead acid batteries

Output voltage
boost charging / NiCd batteries

float charging / NiCd batteries

• Maximum availability
Output current
IN [%]

• Lowest running costs Fig. 1: IU-characteristic, DIN 41773

for lead acid batteries and NiCd batteries

ADC rectifier features A wide Range of

System Solutions
• Universal modular rectifier range for
Electronic equipment for the process and transportation indus-
DC systems from 300 W up to 2400 W tries as well as for telecommunication, power generation and
output power distribution utilities are using microprocessors and require
continuous DC power in the event of mains failure or mains
• Output voltages: disturbances.
12 V, 24 V, 48 V, 60 V, 110 V, 220 V The new BENNING ADC rectifier line with its modular and
compact design represents a perfect solution for a wide range
• Operation with or without batteries of applications in the industrial and telecommunication market.
Together with vented or valve-regulated lead acid batteries
• Wide input voltage range
as well as with NiCd batteries, ADC rectifier systems provide
(93 V – 264 V) continuous DC power with high availability for mission
critical loads.
• Power factor 0.98
• Temperature compensated charge Power supply systems based on the ADC rectifier series are
very adaptable and configurable and are particularly suited to
characteristic for Lead acid or
application areas with specific operating conditions.
NiCd batteries This includes:
• Battery-circuit and battery test with
• IT and Data Centre
manual or automatic operation • Process & Automation
• Infrastructure (inc. Ulilities & Transport)
• Comprehensive alarm and monitoring
• Telecommunications
functions • Oil & Gas

2
Module version (Fig. 2) 19 inch version (Fig. 3)
The ADC module represents a complete rectifier unit and can operate as The ADC is also available as a 19 inch plug-in unit. The output power
a single or parallel operating unit in a wide range of different standard or steps are 300 W, 600 W or 1200 W. For the operation and monitoring
customized cabinet solutions. Several DIP-switches on the module allow of the 19 inch version, the front panel provides push buttons, LCD dis-
the adjustment of operation modes. A separate PCB with LCD display play and signal LED`s.
push buttons and signal LED´s is available as an option.

Operation and monitoring functions

High DC output voltage Battery circuit test
If the DC output voltage level rises above the legal level, the The battery circuit test starts automatically every 24 hours.
output of the ADC shuts down. An alarm signal activates the During the test time of 60 sec., the ADC reduces the output
common internal alarm relay and the red LED lights up. voltage and as the result, the battery feeds the load. If the bat-
tery voltage falls under the adjusted level, the common internal
Low DC output voltage alarm relay will activate and the red LED lights up. A manual
The ADC will not switch off if the DC output level falls under the start of the battery circuit test is also possible.
adjusted level, but a time delayed alarm signal will be linked to
the common internal alarm relay and indicated via the red LED. Battery availability test
During the battery availability test, the output voltage of the ADC
Mains failure will be dropped and the battery will be discharged as in the bat-
In case of mains failure the alarm signal activates the common tery circuit test. If during the discharge process, the battery volt-
alarm relay and the green LED will flash. If the mains voltage age level falls under the selected level, the common alarm relay
returns, the ADC rectifier restarts after the adjusted time delay operates and the red LED indicates “negative battery test”.
and the alarm signal will reset. During mains fault, only battery- The battery availability test can be set to automatic start at any
assisted systems continue to supply DC output voltage. given date and time. Further tests are possible with intervals
between 30 days and maximum 365 days. All ADC rectifiers are
supplied with the factory interval adjustment of 180 days and
test duration of 30 minutes.

4
Wall cabinet versions (Fig. 4 and 5) Combination-cabinets (Fig. 6)
Two sizes of wall cabinets are available which can accommodate ADC 19 inch versions are the perfect choice to build up complete
two or four parallel operating modules. These cabinets also provide DC power systems in floor cabinets or together with valve regulated
space for a limited number of load and battery fuses as well as batteries, in combination-cabinets.
one LVD. The doors are equipped with LCD display, push buttons Within the front door of the enclosure the MCU 2500 remote monitoring
and alarm LED´s. Both wall cabinets are designed to meet system can be installed.
IEC protection class IP 21.

Earth fault monitoring Programmable float / boost change over

The earth fault monitoring measures the resistance of the If the automatic float/boost funtion is activated the ADC
DC output to earth. will switch to boost voltage when the mains returns
If the insulation value falls under the adjusted limit (adjustable following a mains failure, and will operate
between 100 kΩ and 1 MΩ), the common internal alarm in current limit mode for 30 seconds.
relay will activate and the red LED indicates earth fault.
This earth fault monitoring version is not in line with standard The duration of the boost mode is adjustable.
EN 61557-8.
Equalize charge
Battery temperature-compensated charging If the equalize mode is switched on (DIP switch) the charge
To compensate for low and high temperature conditions, the current is limited to 20 % of nominal current .
ADC will adjust the float charge voltage according to the The duration of the equalize current is adjustable. The factory
battery temperature, using a temperature sensor. set value for the duration is 8 hours.
The maximum temperature range for the compensation should
not exceed -20 °C and 70 °C. Option
The standard slope used is -4 mV/°C. A separate relay card is available for monitoring
of individual alarms.

5
Technical Data
Type Module 19 inch module Wall cabinet
Input voltage [V] 110 – 230 V ± 15 %
Input current (at 1 x 230 V) [A] see typetable
Frequency [Hz] 47 – 63
Power factor 0.98
Characteristic IU
Output voltage / Float voltage [V/C] PB 2.23 / NiCd 1.45
Output voltage / Boost voltage [V/C] PB 2.4 / NiCd 1.55
Output voltage / Equalise voltage [V/C] PB 2.70 / NiCd 1.75
Output voltage stability / Static [%] ± 1 (typical ± 0.5)
Output voltage stability / Dynamic [%] ± 5 (load D 10 - 90 - 10)
Response time [ms] < 10 (load D 10 - 90 - 10)
Efficiency*1 [%] typ >90
Ripple [%] <1
Noise voltage 12 V, 24 V units [mV] < 1 (Filter 1, CCITT 0.41)
Noise voltage 48 V, 60 V units [mV] < 2 (Filter 1, CCITT 0.41)
Radio interference EN 55022 class B
Protection class 1, VDE 0804 and IEC 60950
Protection IP 20 IP 20 IP 21
Ambient temperature*2 [°C] -5 – +50 -5 – +45
Operating altitude [m] up to 2000 above sea level
Moisture class F DIN 40040
Cooling fan controlled and monitored
Voltage / Current measurement – LCD-display and control panel
LED`s - Mains LED green LCD-display and control panel
LED`s - Alarm LED red LCD-display and control panel
Potential-free common alarm Rectifier / mains failure, two potential free contacts
Dimensions
Hight [mm] 70 89 (2 U´s) 432*3 (578*4)
Width [mm] 280 483 350
Depth [mm] 170 340 260
Weight [kg] 2.3 9 19*3 (28*4)
Standards
EMC EN 61000-3-2, EN 61000-3-3,
EN 61000-6-2, 61000-6-3
Environment Storage ETS 300019-1-1 class 1.3,
Transport ETS 300019-1-2 class 2.3,
Operation ETS 300019-1-4 class 4.1
Cabinet version / Type Enclosure type Output voltage Output current Input voltage Input current
[V] [A] [V] [A]
E 110/230 G 12/ 20 BWru - PDG PDE19” PDM 12 20 110 / 230 1.8 / 0.9
E 110/230 G 12/ 40 BWru - PDG PDE19” 12 40 110 / 230 3.6 / 1.8
E 110/230 G 24/ 12 BWru - PDG PDE19” PDM 24 12 110 / 230 3.2 / 1.6
E 110/230 G 24/ 20 BWru - PDG PDE19” PDM 24 20 110 / 230 6.4 / 3.2
E 110/230 G 24/ 40 BWru - PDG PDE19” 24 40 110 / 230 12.8 / 6.4
E 110/230 G 24/ 60 BWru - PDG II 24 60 110 / 230 19.2 / 9.6
E 110/230 G 24/ 80 BWru - PDG II 24 80 110 / 230 25.6 / 12.8
E 110/230 G 48/ 6 BWru - PDG PDE19” PDM*5 48 6 110 / 230 3.2 / 1.6
E 110/230 G 48/ 12 BWru - PDG*5 PDE19” PDM 48 12 110 / 230 6.4 / 3.2
E 110/230 G 48/ 24 BWru - PDG*5 PDE19” 48 24 110 / 230 12.8 / 6.4
E 110/230 G 48/ 36 BWru - PDG II*5 48 36 110 / 230 19.2 / 9.6
E 110/230 G 48/ 48 BWru - PDG II*5 48 48 110 / 230 25.6 / 12.8
E 110/230 G 60/ 4.5 BWru - PDG PDE19” PDM 60 4.5 110 / 230 3.2 / 1.6
E 110/230 G 60/ 9.5 BWru - PDG PDE19” PDM 60 9.5 110 / 230 6.4 / 3.2
E 110/230 G 60/ 19 BWru - PDG PDE19” 60 19 110 / 230 12.8 / 6.4
E 110/230 G 60/ 28.5 BWru - PDG II 60 28.5 110 / 230 19.2 / 9.6
E 110/230 G 60/ 38 BWru - PDG II 60 38 110 / 230 25.6 / 12.8
E 110/230 G 108/ 5 BWru - PDG PDE19” PDM 108 5 110 / 230 6.4 / 3.2
E 110/230 G 108/ 10 BWru - PDG PDE19” 108 10 110 / 230 12.8 / 6.4
E 110/230 G 108/ 15 BWru - PDG II 108 15 110 / 230 19.2 / 9.6
E 110/230 G 108/ 20 BWru - PDG II 108 20 110 / 230 25.6 / 12.8
E 110/230 G 216/ 5 BWru - PDG PDE19” 216 5 110 / 230 12.8 / 6.4
E 110/230 G 216/ 10 BWru - PDG II 216 10 110 / 230 25.6 / 12.8
*1) Mains voltage 230 V, *2) non-condensing, *3) wall cabinet I, *4) wall cabinet II, Specifications are subject to change without notice.
*5) 48 V as SELV version optionally available
3
 www.benninguk.com • www.benning.us
www.benning.de

y
n

ISO ISO ISO Energ

y Effi
cie

SCCP Natur
CO2
BENNING worldwide 9001 14001 50001 al R
e so
ur
c

es
Austria Greece South East Asia
Benning GmbH Benning Hellas Benning Power Electronics Pte Ltd
Elektrotechnik und Elektronik Chanion 1, Lykovrisi 141 23 85, Defu Lane 10
Eduard-Klinger-Str. 9 ATHENS #05-00
3423 ST. ANDRÄ-WÖRDERN Tel.: +30 (0) 2 10 / 5 74 11 37 SINGAPORE 539218
Tel.: +43 (0) 22 42 / 3 24 16-0 Fax: +30 (0) 2 10 / 5 78 25 54 Tel.: +65 / 68 44 31 33
Fax: +43 (0) 22 42 / 3 24 23 E-mail: [email protected] Fax: +65 / 68 44 32 79
E-mail: [email protected] E-mail: [email protected]

Belarus Hungary Spain

OOO «BENNING Elektrotechnik Benning Kft. Benning Conversión de Energía S.A.
und Elektronik» Power Electronics C/Pico de Santa Catalina 2
Masherova Ave., 6A, 1003 Rákóczi út 145 Pol. Ind. Los Linares
224030, BREST 2541 LÁBATLAN 28970 HUMANES, MADRID
Tel.: +375 162 / 51 25 12 Tel.: +36 (0) 33 / 50 76 00 Tel.: +34 91 / 6 04 81 10
Fax: +375 162 / 51 24 44 Fax: +36 (0) 33 / 50 76 01 Fax: +34 91 / 6 04 84 02
E-mail: [email protected] E-mail: [email protected] E-mail: [email protected]

Belgium Italy Sweden

Benning Belgium Benning Conversione di Energia S.r.L Benning Sweden AB
branch of Benning Vertriebsges. mbH Via Cimarosa, 81 Box 990, Hovslagarev. 3B
Assesteenweg 65 40033 CASALECCHIO DI RENO (BO) 19129 SOLLENTUNA
1740 TERNAT Tel.: +39 0 51 / 75 88 00 Tel.: +46 (0) 8 / 6 23 95 00
Tel.: +32 (0) 2 / 5 82 87 85 Fax: +39 0 51 / 6 16 76 55 Fax: +46 (0) 8 / 96 97 72
Fax: +32 (0) 2 / 5 82 87 69 E-mail: [email protected] E-mail: [email protected]
E-mail: [email protected]

Croatia Netherlands Switzerland

Benning Zagreb d.o.o. Benning NL Benning Power Electronics GmbH
Trnjanska 61 branch of Benning Vertriebsges. mbH Industriestrasse 6
10000 ZAGREB Peppelkade 42 8305 DIETLIKON
Tel.: +385 (0) 1 / 6 31 22 80 3992 AK HOUTEN Tel.: +41 (0) 44 / 8 05 75 75
Fax: +385 (0) 1 / 6 31 22 89 Tel.: +31 (0) 30 / 6 34 60 10 Fax: +41 (0) 44 / 8 05 75 80
E-mail: [email protected] Fax: +31 (0) 30 / 6 34 60 20 E-mail: [email protected]
E-mail: [email protected]

Czech Republic Poland Turkey

Benning CR, s.r.o. Benning Power Electronics Sp. z o.o. Benning GmbH Turkey Liaison Office
Zahradní ul. 894 Korczunkowa 30 19 Mayıs Mah. Kürkçü Sokak No:16/A
293 06 KOSMONOSY 05-503 GLOSKÓW 34736 KOZYATAGI
Tel.: +420 / 3 26 72 10 03 Tel.: +48 (0) 22 / 7 57 84 53 KADIKÖY / ISTANBUL
Fax: +420 / 3 26 74 12 99 Fax: +48 (0) 22 / 7 57 84 52 Tel.: +90 (0) 2 16 / 4 45 71 46

10002228.20 GB 04/2020 paus Design & Medien, Bocholt Subject to alterations. Printed on chlorine free paper.
E-mail: [email protected] E-mail: [email protected] Fax: +90 (0) 2 16 / 4 45 71 47
E-mail: [email protected]

France P. R. China UAE

Benning Benning Power Electronics (Beijing) Co., Ltd. Benning Power Systems
conversion d’énergie No. 6 Guangyuan Dongjie Middle East / Office: 918,
43, avenue Winston Churchill Tongzhou Industrial Development Zone 9th Floor, AYA Business Center
B.P. 418 101113 BEIJING ADNIC Building, Khalifa Street
27404 LOUVIERS CEDEX Tel.: +86 (0) 10 / 61 56 85 88 ABU DHABI
Tel.: +33 (0) / 2 32 25 23 94 Fax: +86 (0) 10 / 61 50 62 00 Tel.: +971 (0) 2 / 4 18 91 50
Fax: +33 (0) / 2 32 25 13 95 E-mail: [email protected] E-mail: [email protected]
E-mail: [email protected]

Germany Russian Federation Ukraine

Benning Elektrotechnik und Elektronik OOO Benning Power Electronics Benning Power Electronics
GmbH & Co. KG Domodedovo town, 3 Sim'yi Sosninykh str.
Factory I: Münsterstr. 135-137 microdistrict Severny, 03148 KYIV
Factory II: Robert-Bosch-Str. 20 "Benning" estate, bldg.1 Tel.: 0038 044 501 40 45
46397 BOCHOLT 142000 MOSCOW REGION Fax: 0038 044 273 57 49
Tel.: +49 (0) 28 71 / 93-0 Tel.: +7 4 95 / 9 67 68 50 E-mail: [email protected]
Fax: +49 (0) 28 71 / 9 32 97 Fax: +7 4 95 / 9 67 68 51
E-mail: [email protected] E-mail: [email protected]

Great-Britain Slovakia U.S.A.

Benning Power Electronics (UK) Ltd. Benning Slovensko, s.r.o. Benning Power Electronics, Inc.
Oakley House, Hogwood Lane Šenkvická 3610/14W 1220 Presidential Drive
Finchampstead 902 01 PEZINOK RICHARDSON, TEXAS 75081
BERKSHIRE Tel.: +421 (0) 2 / 44 45 99 42 Tel.: +1 2 14 / 5 53 14 44
RG 40 4QW Fax: +421 (0) 2 / 44 45 50 05 Fax: +1 2 14 / 5 53 13 55
Tel.: +44 (0) 1 18 / 9 73 15 06 E-mail: [email protected] E-mail: [email protected]
Fax: +44 (0) 1 18 / 9 73 15 08
E-mail: [email protected]