Transducers and Instrumentation 2010 D. V. S. MURTY Download PDF
A general purpose instrumentation and data logging system was developed for a 97 kW agricultural tractor to measure various parameters like fuel consumption, engine speed, wheel speed, axle torque, weight, and three-point hitch forces. Transducers were used to measure these parameters and signals were conditioned and recorded by a data logger. Software was developed to control the data logger and logging of up to eight channels of data. A cab extension housed the instrumentation system and data logger operator. The system was designed to accommodate future expansion for additional transducers.
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0 ratings0% found this document useful (0 votes)
102 views1 page
Transducers and Instrumentation 2010 D. V. S. MURTY Download PDF
A general purpose instrumentation and data logging system was developed for a 97 kW agricultural tractor to measure various parameters like fuel consumption, engine speed, wheel speed, axle torque, weight, and three-point hitch forces. Transducers were used to measure these parameters and signals were conditioned and recorded by a data logger. Software was developed to control the data logger and logging of up to eight channels of data. A cab extension housed the instrumentation system and data logger operator. The system was designed to accommodate future expansion for additional transducers.
Customer Stampley, Review: We will interpret your continued use of
this site as your acceptance of our use of cookies. You may hide this message. CiteULike is a free online bibliography manager. Register and you can start organising your references online. Tags. Ultrasound Physics and Instrumentation. A general purpose instrumentation and data logging system was developed for a 97 kW agricultural tractor for use in field research on tractor and implement performance. The tractor was fitted with a set of transducers to measure fuel consumption, engine, wheel, and ground speed, front and rear axle torque and weight, and forces in the three-point hitch. Transducer signals were isolated, amplified, and filtered by signal conditioners, and recorded by a microcomputer-based data logger. Flexible software was developed to control the data logger. The software had provision for a wide range of sampling rates and real-time graphic display of up to eight data channels. The system hardware and software were designed to accommodate future expansion with additional transducers on the tractor or implement. A cab extension was built on the side of the existing tractor cab to house the instrumentation system and data logger operator. Abstract Measurement of rotational components using accelerometers is discussed, in addition to the use of acoustic methods which offer advantages on plates and foils. Good agreement is found between accelerometer and acoustic pressure measurements under. Citation: Transactions of the ASAE. 36(2): 265-273. (doi: 10.13031/2013.28334) @1993 Authors: NB McLaughlin, LC Heslop, DJ Buckley, GR St. Amour, BA Compton, AM Jones, P. Van Bodegom Keywords: Tractors, Performance, Transducers, Research, Instrumentation. The progress of science depends largely upon ability to measure various quantities and phenomena. As the pace of scientific development has quickened, stronger emphasis has been placed on accurate, sensitive, and more rapid measuring techniques. Nondestructive. Sign in; Directory. CERN Document Server. Access articles, reports and multimedia content in HEP. Main menu. Search; Submit; Help; Personalize: Your alerts; Your baskets; Your comments; Your searches. Home Practical instrumentation transducers. Information; Discussion (0); Files;. Measurement of rotational components using accelerometers is discussed, in addition to the use of acoustic methods which offer advantages on plates and foils. Good agreement is found between accelerometer and acoustic pressure measurements under certain circumstances. A gated spectrum analysis of a copy machine, showing the dominating noise sources and the time sequence in which they produced the noise, and gated spectrum measurements carried out at different places in a four-stroke medium speed diesel engine, are presented. A Gated Intensity Mapping Program, combining the gated spectrum program with a sound intensity mapping program, allows the drawing of three-dimensional plots and shows the distribution of sound intensity in different time intervals. TRANSDUCERS AND INSTRUMENTATION; 9788120335691; 2010; D. V. S. MURTY; 744 pages; PHI Learning Pvt. Ltd., 2010; Review; User Stampley; PUBLISHED: May 14, 2015
Management of Ageing and Obsolescence of Instrumentation and Control Systems and Equipment in Nuclear Power Plants and Related Facilities Through Modernization