Scribd
Upload
76 views5 pages

Replace Duw: 1. Create A RBS Backup From EMAS in The Old DUW

The document provides instructions for replacing a DUW board and restoring software and configuration. Key steps include: 1) Backing up the current configuration and software version from the old DUW. 2) Powering off the system, swapping the DUW board, and reconnecting fibers to retrieve the fingerprint. 3) Formatting the new DUW and rebooting in backup mode. 4) Transferring the backup and upgrade packages to the new DUW using FTP. 5) Rebooting and verifying a successful upgrade with the correct fingerprint and software.

Uploaded by

Donson junedi Tampubolon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
76 views5 pages

Replace Duw: 1. Create A RBS Backup From EMAS in The Old DUW

The document provides instructions for replacing a DUW board and restoring software and configuration. Key steps include: 1) Backing up the current configuration and software version from the old DUW. 2) Powering off the system, swapping the DUW board, and reconnecting fibers to retrieve the fingerprint. 3) Formatting the new DUW and rebooting in backup mode. 4) Transferring the backup and upgrade packages to the new DUW using FTP. 5) Rebooting and verifying a successful upgrade with the correct fingerprint and software.

Uploaded by

Donson junedi Tampubolon
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

REPLACE DUW

1. Create a RBS backup from EMAS in the old DUW:

And put to ftp, the cv is stored locally (local laptop)


Once the FTP transfer has been done with the latest CV, we can create a new fólder and name it
for instance UP in a directory C:/SW
C:\SW\CV\up
Here we can copy the latest upgradepackage corresponding to our CV. For instance
OP_CXP9016141%1_R2F05_100424_0915

2. Power off and take out the optical fibers. Take out DUW board and put it in the new one.

3. IMPORTANT: Before powering on, connect back the optical fibers in order the RRUW to get
the old fingerprint.

4. Execute: reload –

5. When it recovers, execute vols command. Check if c2 partition is visible. If not use the
following command: mount_c2

6. Execute: formathd /d y formathd /c2:


RBS answers with the following printout:
All data on volume will be destroyed. Continue? y/n
(n): y

7. Restart DUW in backup mode: reload –

8. Write ifconfig le0 <ipaddress> netmask <netmask>. Use “ipaddress” and “netmask” with the
Ip address of the node. Check if it is ok:
$ ifconfig
le0: inet 10.164.130.137 netmask 255.255.255.252 broadcast 10.164.130.139
9. From laptop (cmd), Start, Run, cmd. Change to the directory where the backup is in the local
computer. Execute the following command:
ftp -v -s:cvftpput.sh <ipaddress>

10. Change to the directory where the upgrade package is located in the local computer. Execute
the following command:

ftp -v -s:<pathToCV>\misc\upftpput_<no_rev>.sh <ipaddress>

11. Restart the node and check that the node starts up when the proper sw pakage. Also check
that the fingerprint is the same than before:

$ license server
License Server : 000101d2
Latest PV :3
License Key File : Installed, Tue Mar 30 15:17:38 2010
Sequence Number : 1004
Node Identity State : 1
Backplane Node Id : 343398_504454
Generated Node Id :
Validation Start : Wed Apr 14 18:25:30 2010
Validation Interval : 1 Day
Emergency Status : Deactivated
Emergency State :0
Emergency Counter : 0
Emergency State Time : Tue Mar 30 15:17:38 2010
Emergency Time Limit : 7 Days
$

12. Reinstall the license of this node.

Step 9:
Step selanjutnya (Step 10):
Isi folder misc:

Isi folder cv (diisi dg isi cv Au_CXP9018350%1_R12L15_140513_2100 yg sudah di backup ke


laptop):

Isi folder Upgrade Package;

misc.rar

You might also like