Source of Material 116+400 R/S 200 mts. Of SH-22 (Crusher Quarry ) Date of testing 11.11.

06
Source of Sampling Stock Yard
WMM COMBINED GRADATION
Total Wt. 50000 gm

MID MOTRH LIMIT

IS SIEVE Wt.Retained Cum. Wt. Retained Cum. Retained % Cum. Passing %
LIMIT TABLE - 400-11

53.00 0.00 0.00 0.00 100.00 100.00 100 100

45.00 0.00 0.00 0.00 100.00 97.50 95 100

22.40 16035.00 16035 32.07 67.93 70.00 60 80

11.20 9720.00 25755 51.51 48.49 50.00 40 60

4.75 9440.00 35195 70.39 29.61 32.50 25 40

2.36 2820.00 38015 76.03 23.97 22.50 15 30

0.600 5213.00 43228 86.46 13.54 15.00 8 22

0.075 5333.00 48561 97.12 2.88 4.00 0 8

WMM COMBINED GRADATION CURVE CHART

120
% of passing

100

80

60

40

20

0
0.01 0.10 1.00 10.00 100.00

Column C Sieve JSize

Column in mm
Column K Column M
Column N

Contractor's Repesentative Consultant's Representtative

 Client : Haryana State Road & Bridges Development Corporation Limited
Name of work :- Improvement of Murthal-Sonepat-Sampla-Jhajjar-Dadri road (section of SH-20) from 0.00to95.150 )
and Gurgaon-Farrukhnagar-Jhajjar road (SH- 15A) from RD 5.500 to 46.250 by widening strengthening re -construction
raising providing drains widening of bridges and culverts,retaining,structurees,and other,misc,work etc.
PackaHSRDC/NCR/1/2008
Name Unity-BBEL Joint Venture
NameM/S Meinhardt Singapore Pte L.T.D

MODIFIED PROCTOR TEST

(As per IS 2720 PART - VIII)
Date of Sampling:- 15.12.07 Date of Testing :- 16.12.07
Sample No. :- 69 Frequency Test/Source Approval
Type of Material & Layer :- WMM MIX Design Weight in gms:- 30000 gms
Source of Material:- 116+400 R/S 200mts. Off SH-22 Sample at :- Stock Yard

Mould No. C Wt. Of mould( W1) 7010 gmsVolume of mould (V)= 2250 cc

Test No. 1 2 3 4 5 6 7

Wt. Of wet sample +mould (W2) gms 12069 12246 12280 12372 12340 12406 12499

Wt. Of wet sample (W3)=W2-W1 gms 5059 5236 5270 5362 5330 5396 5489

Wet density of sample, Yw=W3/V gms/cc 2.248 2.327 2.342 2.383 2.369 2.398 2.440

Container No. 219 218 203 216 217 207 214

Weight of Container W5 gms 98.54 98.15 105.80 106.36 94.12 96.27 104.18

Wt. Of wet sample gms 495.90 498.80 416.94 494.66 464.66 461.00 484.68

Wt. Of dry sample gms 487.44 486.26 402.23 478.08 445.92 441.88 466.96

Wt. Of water, W8=W6-W7 gms 8.46 12.54 14.71 16.58 18.74 19.12 17.72

Wt. Of dry sample,W9=W7-W5 gms 388.90 388.11 296.43 371.72 351.80 345.61 362.78

Water Content w=100*W8/W9 % 4.25 5.82 6.77 7.02 8.42 9.09###

Dry density Yd=Yw/1+(W/100) gms/cc 2.248 2.232 2.213 2.232 2.214 2.21197 2.236###

Method used:- Modified

2.240
Rammer Wt.:- 4.9 Kg
2.235
No.of blows/layer:- 56
2.230
No. of layer:- 5
2.225
RESULTS

2.220 MDD=

2.215 OMC=

2.210

2.205

2.200

2.195
2.00 3.00 4.00 5.00 6.00 7.00 8.00 9.00 10.00

Contractor's Representative Consultant's Representative

 Client : Haryana State Road & Bridges Development Corporation Limited
Name of work :- Improvement of Murthal-Sonepat-Sampla-Jhajjar-Dadri road (section of SH-20) from 0.00to95.150 )
and Gurgaon-Farrukhnagar-Jhajjar road (SH- 15A) from RD 5.500 to 46.250 by widening strengthening re -construction
raising providing drains widening of bridges and culverts,retaining,structurees,and other,misc,work etc.
Package No :- HSRDC/NCR/1/2008
Name of the Contractor :- Unity-BBEL Joint Venture
Name of the Consultant :- M/S Meinhardt Singapore Pte L.T.D

LIQUID & PLASTIC LIMITS

( As per IS 2720 part - V )
:- 08.11.06 Date of testing 12.11.06
:- 1 Frequency Test / Source approval
:- WMM Weight in gms. 200
:- 116+400 R/S 200 mts.off SH-22 (Crusher Quarry) Sample at:- Stock Yard

Liquid limit Plastic limit

PARTICULARS
I II III IV V I II
A No. of Blows / Penetration - mm 15 19 22 25 28
B Container No. 1 2 3 4 5
C Wt. Of Container + Wet sample gms. 34.89 36.4496 34.88 39.9392 37.35
D Wt of Container + Dry sample gms. 32.91 34.18 32.67 37.23 34.85
E Wt. Of Container gms. 20.36 20.63 20.13 22.68 22.23
.
N
F Wt. Of Water ( C-D ) gms. 1.98 2.27 2.21 2.71 2.50
G Wt. Of oven Dry Sample ( D-E ) gms. 12.55 13.55 12.54 14.55 12.62
H Water Content % ( FX100/G) gms. 15.8 16.75 17.62 18.62 19.81

Flow Curve
Moisture content (%)

10 20 30 40 50 60 70 80 90 100

Penetration in mm

Liquid Limit - % Plastic Limit - % Plastic Index - %

Contractor's Representative Consultant's Representative

 Client : Haryana State Road & Bridges Development Corporation Limited
Name of work :- Improvement of Murthal-Sonepat-Sampla-Jhajjar-Dadri road (section of SH-20) from 0.00to95.150 )
and Gurgaon-Farrukhnagar-Jhajjar road (SH- 15A) from RD 5.500 to 46.250 by widening strengthening re -construction
raising providing drains widening of bridges and culverts,retaining,structurees,and other,misc,work etc.
Package No :- HSRDC/NCR/1/2008
Name of the Contractor :- Unity-BBEL Joint Venture
Name of the Consultant :- M/S Meinhardt Singapore Pte L.T.D

AGGREGATE IMPACT VALUE TEST

( AS PER IS 2386 Part IV )

Date of sampling :- 08.11.06 Date of testing :- 13.11.06

Sample No. :- Type of Material & Layer :- WMM

Source of Material 116+400 R/S 200mts. Off SH-22(Crusher Quarry) Sampled at :- Stock Yard

Test No. Specification

S.NO DESCRIPTION
I II Limit (%)

1 Wt. Of Clindrical mesure (W1) (gms) 830 830

2 Wt. Of Cylindrical measure+ tost sample (W2 ) (gms) 1195 1200

3 Wt. Of sample placed in cylindrical measure ( W2-W1 ) (gms) 365 370

4 Wt. Of Crushed materiald passing IS sieve 2.36 mm (W3) (gms) 35 30

5 Aggregate impact value = 100*W3/(W2 - W1) (%) 9.59 8.11

6 Aggregate impact value (%) = 8.85

Remarks:

Contractor's Representaitve Consultant's Representative

 Client : Haryana State Road & Bridges Development Corporation Limited
Name of work :- Improvement of Murthal-Sonepat-Sampla-Jhajjar-Dadri road (section of SH-20) from 0.00to95.150 )
and Gurgaon-Farrukhnagar-Jhajjar road (SH- 15A) from RD 5.500 to 46.250 by widening strengthening re -construction
raising providing drains widening of bridges and culverts,retaining,structurees,and other,misc,work etc.
Package No HSRDC/NCR/1/2008
Name of the ContractorUnity-BBEL Joint Venture
Name of the Consultant M/S Meinhardt Singapore Pte L.T.D
Name of the Consulta :- Louis Berger Group, Inc.

FLAKINESS AND ELONGATION INDICES (IS 2386, PART 1)

Date of sampling :- 08.11.06

Date of testing :- 11.11.06

Sample No. :- Source of material :- Stock yard

Weight of Sample :- 28104 Type of Material :- WMM

Weight of Aggregate Weight of Agg. Retained

Weight of Agg.
Seive size in (mm) Weight Retained on on Length Gauge after
Passing Thickness
Retained Thickness retaining on Thickmess
Guage
(gm) Gauge Gauge
Passing Retained (gm)
(gm) (gm)
A B C D

50 40
0 0 0 0

40 31.5
2544 2239 305 85

31.5 25
5290 4830 460 595

25 20
4355 3935 420 665

20 16 5160 4460 700 535

16 12.5 5535 4743 792 640

12.5 10 3200 2715 485 495

10 6.3 420
2020 1485 535

Total Weight 3435

28104 24407 3697

Flakiness Index = (C/A) x 100 = %

13.15

Elongation Index = (D/B) x 100 = %

14.07

Combined Flakiness and Elongation Index

27.23
= %
(C/A) x 100 + (D/B) x 100

Contractor's Representative Consultant's Representative