Scribd
Upload
121 views3 pages

Quality Control Form: Pocedure Qualification Record Wps No: Date: PQR No: Preheat

This document contains a procedure qualification record (PQR) for welding. It lists information about the welding process, base and filler metals, joint details, welding parameters, and test results. This includes welding process type, preheat and interpass temperatures, gas and electrical characteristics, welding technique details, material specifications, and test data from tensile, bend, impact, hardness, and metallography tests. The PQR is prepared, checked, and approved by welding, quality control, and company personnel with their signatures and dates.

Uploaded by

Alesol Equipment
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
121 views3 pages

Quality Control Form: Pocedure Qualification Record Wps No: Date: PQR No: Preheat

This document contains a procedure qualification record (PQR) for welding. It lists information about the welding process, base and filler metals, joint details, welding parameters, and test results. This includes welding process type, preheat and interpass temperatures, gas and electrical characteristics, welding technique details, material specifications, and test data from tensile, bend, impact, hardness, and metallography tests. The PQR is prepared, checked, and approved by welding, quality control, and company personnel with their signatures and dates.

Uploaded by

Alesol Equipment
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

www.Inspection-for-Industry.

com
POCEDURE QUALIFICATION RECORD
Quality Control Form
WPS NO: DATE:
PQR NO: PREHEAT:
Welding process: Preheat Temp (Min 'C):
Types: Manual Machine Automatic Inter Pass Temp (Max 'C):
Semi-Automatic POST WELD HEAT TREATMENT:
Temperature:
Heating rate:
Cooling rate:
JOINTS GAS (QW-408)
Gas Mixture Flow Rate
Shielding:
Trailing:
Backing:
BASE METALS ELECTRICAL CHARACTERISTICS
Material Spec: Current: Polarity:
Type or Grade: Amps:
P-No: G-No: To P-No: G-No: Volts:
Thickness of Test Coupon: Tungsten Electrode:
Diameter of Test Coupon:
Other: N/A
FILLER METALS TECHNIQE
SFA Specification: Travel Speed:
AWS Classification:
F-No/A-No: String or Weave Bead:
Trade Name/Size: Oscillation:
Deposit Thickness: Multi or Single Pass(per side):
Other: Single or Multiple Electrodes:
Others:
POSITION
Position of groove:
Welding Progression : N/A Up hill Down hill
OTHERS TESTS
Type Result Remark

Note :

PREPARED BY: WELDIND ENGINEER NAME/SIGN: DATE:

CHECKED BY: QA/QC MANAGER NAME/SIGN: DATE:

APPROVED BY: COMPANY NAME/SIGN: DATE:


POCEDURE QUALIFICATION RECORD

WPS NO: PQR NO:

Current Voltage Travel Shield Heat


Filler Metal Welding Current (A) (V) Interpass
Pass Speed Gas Input Remark
Type Size Process Polarity Min Max Min Max Temp('C)
(cm/min) (I/min) (kj/cm)

PREPARED BY: WELDIND ENGINEER NAME/SIGN: DATE:

CHECKED BY: QA/QC MANAGER NAME/SIGN: DATE:

APPROVED BY: COMPANY NAME/SIGN: DATE:

POCEDURE QUALIFICATION RECORD

WPS NO: PQR NO:


TENSILE TEST
Thickness or Area Yield Ultimate Tensile Fracture Elog. Red of
Identification Width(mm) 2
Diameter(mm) mm2 Strength Load, N Strength ( N / mm ) Location % Area
BEND TESTS
Type Mandrel Diameter(mm) Angle of Bend Test Result

CHARPY "V" NOTCH IMPACT TESTS (Joules)


Test Temperature:
Size (mm): Lateral Expansion
Location WM FL FL+2mm

WELD METALLOGRAPHY Ferrite Measurement FN

HARNESS TEST
Line Base Metal 1 H.A.Z 1 Weld Metal H.A.Z 2 Base Metal 2

PREPARED BY: WELDIND ENGINEER NAME/SIGN: DATE:

CHECKED BY: QA/QC MANAGER NAME/SIGN: DATE:

APPROVED BY: COMPANY NAME/SIGN: DATE:

You might also like