0% found this document useful (0 votes)
255 views1 page

Embedded System Design Unit - I Embedded Systems Overview

This document outlines the topics that will be covered in an embedded system design course. The course is divided into 5 units that will cover: 1) an overview of embedded systems and processor technology; 2) general purpose processors, software, development environments and peripherals; 3) memory types and hierarchies; 4) interfacing techniques like I/O addressing, interrupts and communication protocols; 5) examples of embedded system designs for a digital camera and PID controllers.

Uploaded by

veeramaniks408
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
255 views1 page

Embedded System Design Unit - I Embedded Systems Overview

This document outlines the topics that will be covered in an embedded system design course. The course is divided into 5 units that will cover: 1) an overview of embedded systems and processor technology; 2) general purpose processors, software, development environments and peripherals; 3) memory types and hierarchies; 4) interfacing techniques like I/O addressing, interrupts and communication protocols; 5) examples of embedded system designs for a digital camera and PID controllers.

Uploaded by

veeramaniks408
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

EMBEDDED SYSTEM DESIGN

UNIT -I EMBEDDED SYSTEMS OVERVIEW


Introduction – Embedded systems overview – Design Challenge – Processor
Technology- ICtechnology- Design technology – Tradeoffs - Custom Single Purpose
Processors: Hardware- Introduction-Combinational logic – Sequential logic – Custom Single
Purpose Processor Design- RT level custom singlepurpose processor design – Optimizing
Custom Single Purpose Processors.

UNIT -II GENERAL PURPOSE PROCESSORS: SOFTWARE AND PERIPHERALS


Introduction – Basic architecture- operation – Programmer’s view- Development
Environment-Application specific Instruction set processors- selecting a microprocessorgeneral
purpose processor design– Peripherals: Timers, Counters and Watchdog Timer –
UART – Pulse Width Modulators- LCD controllers-Keypad controllers – Analog to Digital
converters.

UNIT -III MEMORY


Introduction – Memory write ability and storage permanence write ability –
common memory types –composing memory – Memory Hierarchy and cache – Advanced
RAM.

UNIT -IV INTERFACING


Introduction – communication basics – microprocessor interfacing: I/O addressing –
interrupts –Direct memory access – Arbitration – Multilevel bus architectures – Advanced
communication principles –serial protocols – parallel protocols- wireless protocols

UNIT -V EMBEDDED SYSTEM DESIGN: EXAMPLES


Introduction to a simple digital camera – requirements specification – Design.
Control systems: Openloop and Closed loop control systems – General control systems –
PID controllers – software coding – PIDtuning – Benefits of Computer based control
implementation.

BOOKS
1. Frank Vahid, Tony Givargis ,”Embedded System Design: A Unified Hardware/
Software Introduction”, Wiley Student Edition, 2008.

You might also like