Making modern living possible

L




B
L



B

R600a
Danfoss Compressors
220-240 V • 50 Hz & 60 Hz

REFRIGERATION &






AIR CONDITIONING DIVISION Quick reference

 Compressor Code number EN 12900 (CECOMAF) EN 12900 (CECOMAF) at ASHRAE subcooled at

Application
Capacity [W] LBP rating point -25°C / 55°C LBP rating point -23.3°C / 5

Level
Cooling COP COP Cooling COP
Capacity without with Capacity without RC
Evaporating temperature [°C] RC RC
-35 -30 -20 -15 -10 -5 0 5 [W] [W/W] [W/W] [W] [kcal/h] [W/W] [kcal/Wh]
1. PLE35K 101H0360 38 52 68 87 109 27 0.68 38 33
TLES4KK.3 102H4438 19 29 57 75 96 42 0.90 57 49 1.18 1.02
TLES4.8KK.3 102H4538 28 40 73 94 119 55 1.00 74 65 1.30 1.12
TLES5.7KK.3 102H4638 36 50 89 114 144 68 1.02 91 79 1.32 1.14
Energy-optimized

TLES6.5KK.3 102H4738 45 61 105 134 168 81 1.02 108 94 1.31 1.13

3.

TLES7.5KK.3 102H4838 53 71 122 155 194 94 1.02 1.07 126 108 1.32 1.14
TLES8.7KK.3 102H4938 62 83 143 181 228 110 1.03 1.08 147 126 1.33 1.14
TLES10KK.3  102H4038 73 97 162 205 255 126 0.98 1.06 168 145 1.26 1.08
NLE8.8KK.4 105H6800 63 84 141 179 223 110 1.18 1.22 147 127 1.51 1.30
NLE10KK.4 105H6867 74 98 164 207 257 128 1.19 1.23 170 151 1.51 1.30
NLE11KK.4 105H6952 82 109 184 232 290 143 1.19 1.22 191 165 1.52 1.31
4.

NLE13KK.4 105H6959 99 131 217 274 340 170 1.18 1.23 226 194 1.50 1.29
NLE15KK.4 105H6968 110 146 243 307 382 190 1.20 1.25 253 213 1.53 1.32
TLY4 KK.3 102H4442 19 29 57 74 95 42 0.96 0.99 57 49 1.26 1.08
TLY4.8KK.3 102H4542 28 40 73 94 119 55 1.04 1.06 74 65 1.35 1.16
TLY5.7KK.3 102H4642 36 51 89 114 144 68 1.03 1.06 91 79 1.33 1.15
TLY6.5KK.3 102H4742 46 62 106 135 170 82 1.10 1.14 110 94 1.42 1.22
TLY7.5KK.3 102H4842 53 71 122 155 194 94 1.09 1.14 126 108 1.41 1.22
TLY8.7KK.3 102H4942 65 86 144 182 227 112 1.12 1.16 149 126 1.44 1.24
TLY10KK.3  102H4042 74 98 164 208 260 128 1.15 1.21 170 146 1.47 1.27
3.

TLX4KK.3 102H4447 21 32 59 76 95 45 1.15 3) 60 52

TLX4.8KK.3 102H4547 29 42 74 94 117 57 1.23 3) 77 66
TLX5.7KK.3 102H4647 37 52 91 115 143 70 1.28 3) 93 80
High Energy-optimized

TLX6.5KK.3 102H4747 46 63 106 133 165 83 1.30 3) 110 95

TLX7.5KK.3 102H4847 55 75 125 157 195 98 1.32 3) 130 112
TLX8.7KK.3 102H4947 65 88 146 184 227 115 1.31 3) 152 131
TLX4KK.4  102H4449 94 46 1.26 3) 61 53
TLX4.8KK.4  102H4532 32 124 58 1.32 3) 78 67
4.

TLX10KK.4  102H4040 76 265 132 1.30 3) 175 150

NLX8.8KK 105H6874 60 83 144 182 227 111 1.35 148 127
NLX10KK 105H6871 74 100 169 215 269 131 1.36 174 150
NLX11KK 105H6984 84 112 189 240 300 147 1.36 195 168
1.

NLX13KK 105H6983 98 133 223 282 350 174 1.36 231 199
NLX15KK 105H6981 110 147 249 317 397 193 1.34 257 221
NLX8.0KK.2 105H6010 52 73 130 167 210 99 1.47 3) 133 115
NLX8.8KK.2 105H6011 62 85 147 187 234 113 1.49 3) 151 130
NLX10KK.2 105H6101 75 101 171 217 271 133 1.49 3) 178 153
2.

NLX11KK.2 105H6971 86 115 192 242 301 150 1.49 3) 200 172
NLX13KK.2 105H6976 95 129 219 277 345 170 1.49 3) 227 196
NLX15KK.2 105H6977 110 147 245 309 384 192 1.48 3) 255 220
TLES4KTK 102H4436 18 28 55 74 96 123 154 40 0.83 0.84 54 47 1.09 0.94
TLES5KTK 102H4536 28 41 76 99 126 159 196 57 0.93 0.95 77 66 1.21 1.04
TLES6KTK 102H4636 31 48 87 112 140 66 0.95 0.97 88 76 1.22 1.05
TLES7KTK 102H4736 40 57 101 130 163 77 0.95 0.97 103 89 1.22 1.05
Tropical
1.

TLES8KTK 102H4836 48 66 116 149 188 89 0.95 0.97 119 103 1.21 1.04
NLE9KTK 105H6848 54 74 128 166 211 98 1.03 1.05 131 112 1.32 1.13
NLE11KTK 105H6948 73 98 162 206 261 127 1.03 1.05 167 144 1.31 1.13
NLE15KTK 105H6946 93 128 219 280 351 169 1.00 1.02 225 194 1.27 1.10
NLE15KTK.2 105H6966 103 140 239 305 383 184 1.15 245 211 1.45 1.25
2.

PLE TLES/TLX/TLY NLE/NLX


ø16


70

70
70

ø16
170 C 170 D
D C D
E
E

B A AB A B

206
222
8300

8301-3
130

157

166
ubcooled at Displace- Recommended Voltage Electrical Equipment Compressor
t -23.3°C / 54.4°C ment compressor cooling and LST (RSIR) LST (RSCR) Run capacitor (RC) Cord Cover

COP COP at frequen- PTC Starting device PTC Starting device 1) optional relief
hout RC with RC ambient temperature cies without RC connector with RC connector 2) compulsory
spades spades spades
[kcal/Wh] [W/W] [kcal/Wh] [cm3] 32°C 38°C 43°C 4.8 mm 6.3 mm 4.8 mm 6.3 mm 4.8 mm 6.3 mm
0.90 0.77 3.00 S* S* 1 103N0021 103N0016 117-71192) 117-71172) 103N0491 103N1010 PLE35K
1.02 4.01 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES4KK.3
1.12 4.78 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES4.8KK.3
1.14 5.70 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES5.7KK.3
1.13 6.49 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES6.5KK.3
1.14 1.38 1.19 7.48 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES7.5KK.3
1.14 1.39 1.19 8.67 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES8.7KK.3
1.08 1.36 1.17 10.13 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010  TLES10KK.3
1.30 1.56 1.34 8.76 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE8.8KK.4
1.30 1.57 1.35 10.09 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE10KK.4
1.31 1.56 1.34 11.15 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE11KK.4
1.29 1.57 1.35 13.25 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE13KK.4
1.32 1.59 1.37 14.65 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE15KK.4
1.08 1.29 1.11 4.01 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLY4 KK.3
1.16 1.37 1.18 4.78 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLY4.8KK.3
1.15 1.37 1.18 5.70 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLY5.7KK.3
1.22 1.47 1.27 6.49 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLY6.5KK.3
1.22 1.47 1.27 7.48 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLY7.5KK.3
1.24 1.49 1.28 8.67 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLY8.7KK.3
1.27 1.55 1.33 10.13 S S S 1 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010  TLY10KK.3
1.48 3) 1.28 3) 4.01 S* S* S* 1 103N0050 103N0016 117-71192) 117-71172) 103N2010 103N1010 TLX4KK.3
1.58 3) 1.36 3) 4.78 S* S* S* 1 103N0050 103N0016 117-71322) 117-71312) 103N2010 103N1010 TLX4.8KK.3
1.63 3) 1.40 3) 5.70 S* S* S* 1 103N0050 103N0016 117-71192) 117-71172) 103N2010 103N1010 TLX5.7KK.3
1.65 3) 1.42 3) 6.49 S* S* S* 1 103N0050 103N0016 117-71192) 117-71172) 103N2010 103N1010 TLX6.5KK.3
1.68 3) 1.44 3) 7.48 S* S* S* 1 103N0050 103N0016 117-71322) 117-71312) 103N2010 103N1010 TLX7.5KK.3
1.66 3) 1.43 3) 8.67 S* S* S* 1 103N0050 103N0016 117-71192) 117-71172) 103N2010 103N1010 TLX8.7KK.3
1.62 3) 1.39 3) 4.01 S* S* S* 1 103N0050 103N0016 117-71362) 103N2010 103N1010  TLX4KK.4
1.68 3) 1.44 3) 4.78 S* S* S* 1 103N0050 103N0016 117-71362) 103N2010 103N1010  TLX4.8KK.4
1.65 3) 1.42 3) 10.13 S* S* S* 1 103N0050 103N0016 117-71392) 103N2010 103N1010  TLX10KK.4
1.72 1.48 8.76 S* S* S* 1 103N0021 103N0016 117-71192) 117-71172) 103N2010 103N1010 NLX8.8KK
1.72 1.48 10.09 S* S* S* 1 103N0021 103N0016 117-71192) 117-71172) 103N2010 103N1010 NLX10KK
1.73 1.49 11.15 S* S* S* 1 103N0021 103N0016 117-71192) 117-71172) 103N2010 103N1010 NLX11KK
1.72 1.48 13.25 S* S* S* 1 103N0021 103N0016 117-71192) 117-71172) 103N2010 103N1010 NLX13KK
1.70 1.46 14.65 S* S* S* 1 103N0021 103N0016 117-71292) 117-71302) 103N2010 103N1010 NLX15KK
1.88 3) 1.62 3) 8.05 S* S* S* 1 103N0050 103N0016 117-71322) 103N2010 103N1010 NLX8.0KK.2
1.89 3) 1.63 3) 8.76 S* S* S* 1 103N0050 103N0016 117-71362) 103N2010 103N1010 NLX8.8KK.2
1.89 3) 1.63 3) 10.09 S* S* S* 1 103N0050 103N0016 117-71362) 103N2010 103N1010 NLX10KK.2
1.89 3) 1.63 3) 11.15 S* S* S* 1 103N0050 103N0016 117-71362) 103N2010 103N1010 NLX11KK.2
1.89 3) 1.63 3) 13.25 S* S* S* 1 103N0050 103N0016 117-71322) 103N2010 103N1010 NLX13KK.2
1.88 3) 1.62 3) 14.65 S* S* S* 1 103N0050 103N0016 117-71192) 117-7117 2)
103N2010 103N1010 NLX15KK.2
0.94 1.10 0.95 3.86 S S S 2 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES4KTK
1.04 1.23 1.06 5.08 S S S 2 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES5KTK
1.05 1.24 1.07 5.70 S S S 2 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES6KTK
1.05 1.24 1.07 6.49 S S S 2 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES7KTK
1.04 1.23 1.06 7.76 S S S 2 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 TLES8KTK
1.13 1.35 1.15 8.35 S S S 2/3 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE9KTK
1.13 1.34 1.15 11.15 S S S** 2/3 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE11KTK
1.10 1.30 1.12 14.65 S S F₁ 2 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE15KTK
1.25 14.65 S S S 2 103N0018 103N0011 103N0021 103N0016 117-71191) 117-71171) 103N2010 103N1010 NLE15KTK.2


NLX-KK.2 Mounting accessories

170
170

70

Nut M6
ø16 Washer Was
ø16 Grommet sleeve
Compressor base
D E Compressor ba
E

9
C C
3327 2

A B Cabinet base Screw M6 x 25 Rubber grommet Cabinet bas

Bolt joint for Sna

one compressor: 118-1917 in q
in quantities: 118-1918
254
254

8302-3 8302-6

The mounting accessories for the compressors are ava

166

with bolt joint or snap-on joint.

The rubber grommets are designed for the 16 mm holes
 Dimensions Hermetic Compressors R600a • 220-240 V • 50 Hz & 60 Hz Applications
Height Connectors LBP: Low Back Pressure
MBP: Medium Back Pressure
[mm] location/I.D. [mm] Model designation
Suc- Pro- Dis-
Compressor Optimization Compressor Application Start Generation
tion cess charge Motor types
design level size range characteristics
A B C D E RSIR: Resistant Start Induction Run
137 135 6.2 6.2 5.0 RSCR: Resistant Start Capacitor Run
163 159 6.2 6.2 5.0
163 159 6.2 6.2 5.0
163 159 6.2 6.2 5.0
PL Blank Starting devices
163 159 6.2 6.2 5.0 Standard LST: Low Starting Torque
163 159 6.2 6.2 5.0 energy level LST is used with capillary tube control and
163 159 6.2 6.2 5.0 Blank => pressure equalizing. (Pressure equalizing
173 169 6.2 6.2 5.0
S Nominal K first may exceed 10 minutes). The PTC starting
Semi-direct displacement R600a generation device requires 5 minutes cooling before
190 183 6.2 6.2 5.0 intake in cm3 Blank => each start.
190 183 6.2 6.2 5.0 LBP/(MBP) universal .2 => Note: To fulfil the requirements of
190 183 6.2 6.2 5.0 E Exception: (principal rule)
second EN 60355-2-34 the protection screen
190 183 6.2 6.2 5.0 TL Energy-opti- For PL generation 103N0476 must be applied to the PTC
197 190 6.2 6.2 5.0 mized com­pres­sors KT K = LST starting device.
163 159 6.2 6.2 5.0 (optimized the R600a characteristics .3 =>
163 159 6.2 6.2 5.0 motor) ca­pa­ci­ty at (capillary tube) third
ra­ting point is LBP/(MBP) generation
163 159 6.2 6.2 5.0 Electrical Equipment
X, Y stated. tropical 1) Run capacitor optional
163 159 6.2 6.2 5.0
High Energy- etc. 2) Run capacitor compulsory
163 159 6.2 6.2 5.0 optimized
173 169 6.2 6.2 5.0 3) COP values with ePTC
(high optimi-
173 169 6.2 6.2 5.0 NL zation level) Run capacitors (RC):
173 169 6.2 6.2 5.0
117-7117: 4 µF
173 169 6.2 6.2 5.0 117-7119: 4 µF
173 169 6.2 6.2 5.0 117-7129: 5 µF
173 169 6.2 6.2 5.0 117-7130: 5 µF
173 169 6.2 6.2 5.0 Examples 117-7131: 3 µF
173 169 6.2 6.2 5.0 PL E 35 K 117-7132: 3 µF
173 169 6.2 6.2 5.0 117-7136: 2 µF
173 169 6.2 6.2 5.0 TL ES 6 KT K 117-7139: 2.5 µF
173 169 6.2 6.2 5.0 NL X 15 K K .2
203 197 6.2 6.2 5.0
203 197 6.2 6.2 5.0 Test conditions EN 12900 (CECOMAF)
203 197 8.2 6.2 6.2 Application range Application R600a
203 197 8.2 6.2 6.2 Condensing temperature 55°C
203 197 8.2 6.2 6.2 Ambient temperature 32°C
• All compressors for R600a have denominations ending with K after the number Suction gas temperature 32°C
203 197 6.2 6.2 5.0
203 197 6.2 6.2 5.0 for displacement or capacity. Liquid temperature 55°C
220 V / 50 Hz
203 197 6.2 6.2 5.0 They are designed for low operating temperatures - LBP (Low Back Pressure)
203 197 8.2 6.2 6.2 for use in refrigerators, freezers and similar ap­plications. Test conditions ASHRAE
203 197 8.2 6.2 6.2 Application R600a
203 197 8.2 6.2 6.2 • Compressors with endings K and KK are designed for regions with stable
Condensing temperature 54.4°C
173 169 6.2 6.2 5.0 supply voltage. Ambient temperature 32°C
173 169 6.2 6.2 5.0 • Endings KTK are designed for less stable supply voltage and tropical condi- Suction gas temperature 32°C
173 169 6.2 6.2 5.0 Liquid temperature 32°C
173 169 6.2 6.2 5.0 tions. 220 V / 50 Hz
173 169 6.2 6.2 5.0 Some of the smaller compressors and the variable speed compressors are also
197 191 6.2 6.2 5.0 released for medium operating temperatures - MBP (Medium Back Pressure).
197 191 6.2 6.2 5.0 Compressor cooling
197 191 6.2 6.2 5.0 S = Static cooling normally sufficient
203 197 6.2 6.2 5.0 O = Oil cooling
F₁ = Fan cooling 1.5 m/s
(compressor compartment temp.
Warnings
equal to ambient temperature)
F₂ = Fan cooling 3.0 m/s necessary
• R600a is flammable in concentrations of air between approximatey 1.5% and * = Run capacitor compulsory
8.5% by volume ** = Run capacitor compulsory
in 43°C ambient temp. at 60 Hz
(LEL lower explosion limit and UEL upper explosion limit).
• An ignition source at a temperature higher than 460°C is needed for a
combustion to occur. Voltages and frequencies
• Yellow warning label: 1 = 198-254 V, 50 Hz
2 = 187-254 V, 50 Hz
sher Clip 3 = 198-254 V, 60 Hz, LBP, F₁
Steel pin 4 = 198-254 V, 50-60 Hz
ase

 = preliminary data

9
R600a

8122-2
7382 2

se Rubber grommet
• Isobutane is significantly different from R12 and R134a. This means that
ap-on compressors for R600a cannot be used with R12 or R134a.
uantities: 118-1919 • No high potential test nor start tests must be carried out while the
compressor is under vacuum.
• No attempt must be made to start the compressor without a complete
starting device.
• Allow the compressor to assume a temperature above 10°C before starting
the first time in order to avoid starting problems.
ilable in two versions, • Anti-freeze agents must not be used in the compressors as such agents are
damaging to several of the materials used. In particular, the ethyl or methyl
of the baseplate. alcohol contents of such anti-freeze agents have a destructive effect on the
synthetic motor insulation.
 LST - RSCR LST - RSIR
PLE TLES/TLX/TLY - NLE/NLX TLES/TLY - NLE
e
e g g
g

b
b b 8217

8216 8223

a1 a1
a1

d d
d
e e
Main winding a1 Start winding
Main winding a1 Main winding N S a1
N S N
Start winding Start winding

N L N L N L
C C C

Winding protector Winding protector

Winding protector

Protection screen for PTC Run capacitor holder Run capacitor holder assembly sequence
Note: A run capacitor holder is available
To fulfil the requirements of EN 60355-2-34 for the „Energy-optimized“ and „High
the protection screen 103N0476 must be Energy-optimized“ compressor range.
applied to the PTC starting device. This optional part enables to fix the run
capacitor for 220V directly and earth-
connected on the compressor shell,
concentrating all electrical accessories on
L
the compressor. This will save space in the
machine compartment.
Code numbers:

run capacitor holder 117-0300
screw M4 x 8 PZD 2 117-0301 B
3. L
2.

1.
B
7363

8436

8 35

Electronically controlled PTC (ePTC)

Introduction Advantages: Functional Description
The asynchronous motor of a single • 2 watt power consumption reduction The main component of the ePTC is
phase AC powered compressor has • Short recovery time (re-start possible the same PTC pill like in other 220-240
two windings, a main and an auxiliary after few seconds if pressure is eualized) V 103N…. Danfoss PTC starters. Thus
winding. The auxiliary winding is powered • Can be used to reach a higher cabinet the start of the compressor motor is
high at start by means of a starting device, energy class performed in the same way. In standard
then powered down, often still utilized • Can be used to replace a run capacitor PTC starters the >2 W energy loss to
continuously by means of a run capacitor. in connection with e.g. keep the PTC heated during compressor
The starting device of our standard a TLES compressor operation are not avoidable. In the ePTC a
PTC-starters is a “Positive Temperature • Run capacitor acceptance small electronic circuit cuts off the current
Coefficient” resistor, PTC. When heated through the PTC short time after start and
up during the start phase, the PTC almost thus reduces the energy loss down to
cuts off the current to the auxiliary win- approx 0.4 W. The switch used is a Triac, an
ding, leaving only enough current to keep electronic AC switch, controlled by a timer
itself heated to this closing level. The heat circuit.
loss for this amount to approximately 2.5 As the timer circuit has a short reset time
W. With the ePTC this loss can be reduced and the main PTC cools down during
down to approximately 0.4 W by an extra compressor operation already, the full
electronic circuit. start torque will be available after approx
The ePTC solution is an easy way to save 6 s compressor off time. However, it is still
energy in existing and future freezer a LST starting device, needing full pressure
and refrigerator designs. It is fully inter- equalization before start.
changeable with the conventional PTC
types 103N0018 and 103N0021 with 4.8 mm
spade connectors. ePTC (code number 103N0050)

Legend

a1: PTC starting device b: Cover c: Starting capacitor

a2: Starting relay d: Cord relief
b1: Clamp (part of compressor)
a3: Starting device e: Run capacitor
b2: Gasket (part of compressor) g: Protection screen for PTC
 Applications

Our compressor range will perfectly fit various
applications like:
• Refrigerators and freezers
• Laboratory and medical equipment
• Clip-on and condensing units

• Compressed air dryers
• Glass door merchandisers
• Bakery refrigeration equipment
• Low temperature display cabinets
• Vending machines
• Ice making machines
• Slush and frozen beverage makers
• Bottle coolers

Refrigeration Controls programme consists of:

Thermostatic expansion Hermetic filter drier Direct or servo operated Sight glass with
valves with solid core solenoid valve moisture indicator

Danfoss Compressors GmbH • Mads-Clausen-Str. 7 • D-24939 Flensburg / Germany • Tel: +49 (0461) 4941-0 • Fax: +49 (0461) 44715 • compressors.danfoss.com

DEHC.PB.520.D5.02/520N0642 compressors.danfoss.com
(Produced by Danfoss Compressors/DEHC 6093, 06.2008)