Scribd
Upload
11K views4 pages

Machine Tools Questions and Answers - Drilling Machine

The document contains 18 multiple choice questions about drilling machine operations like drilling, reaming, tapping, and tool holding methods. Some key points covered are: - Drilling machines can perform operations like reaming but not lapping or tapping. - Tool holding methods include chucks, sleeves, and special attachments like floating holders. - Additional operations like reaming, boring, and countersinking are used to further finish holes drilled by a drilling machine. - The drilling machine is the second most important machine tool and is primarily used to drill cylindrical holes using downward pressure.

Uploaded by

Rohit Ghulanavar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
11K views4 pages

Machine Tools Questions and Answers - Drilling Machine

The document contains 18 multiple choice questions about drilling machine operations like drilling, reaming, tapping, and tool holding methods. Some key points covered are: - Drilling machines can perform operations like reaming but not lapping or tapping. - Tool holding methods include chucks, sleeves, and special attachments like floating holders. - Additional operations like reaming, boring, and countersinking are used to further finish holes drilled by a drilling machine. - The drilling machine is the second most important machine tool and is primarily used to drill cylindrical holes using downward pressure.

Uploaded by

Rohit Ghulanavar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Machine Tools Questions and Answers – Drilling

machine

1. Which of the following operation, we can’t perform on drilling machine?


A) reaming
B) tapping
C) lapping
D) none of the mentioned
Answer: D

2. Tapping attachment is included in_______ method of tool holding devices.


A) by chucks
B) by a sleeve
C) by directly fitting in the spindle
D) none of the mentioned
Answer: D

3. Floating holder is included in______ method of tool holding devices.


A) by directly fitting in the spindle
B) by special attachments
C) by a socket
D) none of the mentioned
Answer: B

4. Which of the following method is not used for holding tool?


A) by a sleeve
B) by chucks
C) by a socket
D) none of the mentioned
Answer: D

5. We can’t perform grinding operation in a drilling machine.


A) true
B) false
Answer: B

6. Which of the following device is not used for holding the work in a drilling machine?
A) step block
B) drill jigs
C) both step block and drill jigs
D) none of the mentioned
Answer: D

7. In drilling operation, work should be held by hand.


A) true
B) false
Answer: B

8. The drilling machine is the second most important machine tool in a workshop.
A) true
B) false
Answer: A

9. The drilling machine was primarily designed to originate a _____


A) flat surface
B) cylindrical surface
C) taper surface
D) none of the mentioned
Answer: D

10. For drilling operation, the drill rotates with_____ pressure if job is held on earth.
A) upward
B) downward
C) 45 degree inclined to both planes
D) none of the mentioned
Answer: B

11. Tapping is carried out by using tap tool.


A) true
B) false
Answer: A

12. Which of the following operation is carried out to make the hole dimensionally more
accurate?
A) reaming
B) tapping
C) boring
D) none of mentioned
Answer: A
13. Reaming is carried out by using a reamer.
A) true
B) false
Answer: A

14. Countersinking process is carried out by using countersink tool.


A) true
B) false
Answer: A

15. Taping process employs high operating conditions.


A) true
B) false
Answer: B

16. To produce more accurate holes, which of the following operation should be
performed third?
A) drilling
B) reaming
C) centering
D) boring
Answer: D

17. Which of the following operation is used to enlarge the previously drilled hole?
A) reaming
B) tapping
C) boring
D) none of mentioned
Answer: C

18. The speed at which the piece advances through the cutter is called 
(A) Cutting speed
(B) Feed rate
(C) Depth of cut
(D) None of the above
Answer: B

You might also like