Scribd
Upload
138 views

Form - Design Control Form

Uploaded by

Selvaraj Simiyon
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
138 views

Form - Design Control Form

Uploaded by

Selvaraj Simiyon
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Design Control Plan

Rev. XX

SECTION 1: PROJECT IDENTIFICATION

Design Project No.:

TITLE OF PROJECT: DATE:

DESCRIPTION OF PROJECT: include basic idea and how it may work, etc.

SECTION 2: DESIGN RESPONSIBILITY

Design responsibility is assigned to the following persons:

RESPONSIBLE PARTY ROLE / RESPONSIBILITY

SECTION 3: DESIGN INPUTS


All requirements for the design must be defined, recorded, attached or referenced.

TYPE OR INPUT DOCUMENT NAME & LOCATION OF THE DOCUMENTS


Product functional requirements:
(form, fit, function)

Customer requirements:

Regulatory requirements:

Previous design info:

Page 1 of 4
Design Control Plan
Rev. XX

Industry requirements:

Required materials:

Preferred suppliers/subcontractors:

Any other requirements:

SECTION 4: DESIGN DRAWING / SPECS (OUTPUTS):


Reference all design outputs, such as drawings, specifications, procedures, inspection criteria, testing plans, etc.

OUTPUT FILE NAME FILE LOCATION

Page 2 of 4
Design Control Plan
Rev. XX

SECTION 5: DESIGN REVIEW / VERIFICATION


Indicate or attach the results of all design reviews and verifications, unless the results of design reviews are
included in the design outputs (signoffs, check signatures, etc.) Remember that design verification is performed
to verify that all design inputs (Section 3) have been addressed in the design outputs (Section 4.)

Type of Review / Verification Action Responsible Party Date Result

SIGNATURE
REQUIRED! APPROVED; DESIGN MAY CONTINUE. _________________________ __________
RESPONSIBLE PARTY DATE

SECTION 6: DESIGN VALIDATION

Design validation is done to ensure a sample product built meets the design requirements (inputs) of Section 3.
This may be done by first article inspections, prototype testing, or other means.

Type of Validation Action Responsible Party Date Result

SIGNATURE APPROVED; DESIGN MAY CONTINUE. _________________________ __________


REQUIRED! RESPONSIBLE PARTY DATE

Page 3 of 4
Design Control Plan
Rev. XX

SECTION 7: FINAL DESIGN APPROVAL

The [Responsible Party] must review the efforts so far and approve the design for full production.

SIGNATURE DESIGN IS APPROVED FOR PRODUCTION. _________________________ __________


REQUIRED! RESPONSIBLE PARTY DATE

NOTES:

Page 4 of 4

You might also like