Scribd
Upload
5K views5 pages

BMW Coding Parameters - F48 - For X1 Series

The document provides instructions for coding several BMW modules to modify vehicle settings and features. It describes how to code the HU_NBT module to enable features like wireless CarPlay and hotspot mode. It also provides coding for the ACSM module to disable seatbelt reminders and chimes. Finally, it lists coding for the BDC_BODY module to modify settings for auto start/stop, door locks, and mirror controls.

Uploaded by

JB
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
5K views5 pages

BMW Coding Parameters - F48 - For X1 Series

The document provides instructions for coding several BMW modules to modify vehicle settings and features. It describes how to code the HU_NBT module to enable features like wireless CarPlay and hotspot mode. It also provides coding for the ACSM module to disable seatbelt reminders and chimes. Finally, it lists coding for the BDC_BODY module to modify settings for auto start/stop, door locks, and mirror controls.

Uploaded by

JB
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

Re-Code for Enhanced Bluetooth:

Change FA (VO) to Remove 6NH from VO & Add 6NS to VO


VO Code HU_NBT
Read FA(VO)Activate FA(VO)Read SVTRight-Click ECU & Select Code

Now Proceed to code HU_NBT Module … or re-code if coding was already present

IF YOU NEED TO DO EITHER OF THE ABOVE … FOLLOW THE INSTRUCTIONS FOR “HOW TO
CHANGE FA” in my BMW Coding Beginner’s Guide. This needs to be done FIRST …
meaning before you perform FDL Coding or Changing Werte Values

ACSM Module:

SeatBelt Reminder Lights OFF: set all to nicht_aktiv


3000Gurtzustandsanzeige_Beifahrer_GFW_GZA_BF
3000Gurtzustandsanzeige_Fahrer_GFW_GZA_FA

Disable Welcome 3 Gongs:


3000  Initialwarnung_GWF_IW = nicht_aktiv

SeatBelt Reminders/Sound OFF: set all to nicht_aktiv


3000SBR_PreWarning_Fahrer
3000SBR_PreWarning_Beifahrer
3000SeatBeltReminder_SBR_Fahrer
3000 SeatBeltReminder_SBR_Beifahrer

BDC_BODY Module:
Auto Start/Stop OFF by default
3023TCM_MSA_DEFAULT_OFF set to: aktiv

Auto Start/Stop – Remember LAST Setting


3023TCM_MSA_MEMORY set to: aktiv

Unlock all doors with engine off (Single-Pull Handles):


3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK set to: aktiv

Electronics off when door opened


3020TCM_LOGIC_R_OFF_DOOR set to: aktiv

Close Mirrors/Windows/SunRoof from FOB or CA – set all to: aktiv


3056KOMFORTSCHLIESSUNG_FB
3056KOMFORTSCHLIESSUNG_PA
3110ASP_BEIKLAPPEN
3110ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN
3110ASP_BEIKLAPPEN_NACH_KOMFORTSCHLIESSEN

Set Mirror Fold Delay Time to Instant upon locking


1
3056KOMFORT_SCHLIESSEN set to werte=00

Start Car by pushing button (hold brake not needed)


3020TCM_STARTLOCK_BRAKE set to: nicht_aktiv
3020TCM_STARTLOCK_DRIVINGREADINESS set to: nicht_aktiv

Tilt Passenger Mirror farther down when in reverse


3110ASP_BORDSTEINAUTOMATIK_DELTA set to: werte=4B

Opening FRONT doors won’t interrupt windows:


3050FH_TUERAUF_STOP_MAUT set to nickt_aktiv

Opening REAR doors won’t interrupt windows:


3051FH_TUERAUF_STOP_MAUT_REAR set to nickt_aktiv

Fog Lights stay on w/ High Beams


3068NSW_AUS_BEI_FL set to nicht_aktiv

Ambiance Lighting controlled independent from Dimmer Switch


3070  AMBIENTE_NACHFUEHRUNG set to: nicht_aktiv

Increase Angel Eyes Brightness to 100%


Xxxx  MAPPING_STANDL_V_L_PWM_LEVEL_1 = 100%
Xxxx  MAPPING_STANDL_V_R_PWM_LEVEL_1 = 100%
Xxxx  MAPPING_PARKL_V_L_PWM_1_LEFT = 100%
Xxxx  MAPPING_PARKL_V_L_PWM_2_RIGHT = 100%

Change Mirror Un-Fold Automatically at XX Speed (Binary value in Werte):


3110  ASP_GESCHWINDIGKEIT_AUTO_AUSKLAPPEN  werte=14 (12Mph)

Change Triple-Blink Count to another Value:


3068  BLINKZYKLEN_ANZAHL_TIPP – Werte = # blinks-1 (4 blinks = werte=3)

Turn on Brake Force Flashing with Hard Braking:


3068  ESS_AKTIVIERBARER_AUSGANG = bremsclicht blinkend

Turn off Amber Side Markers next to Headlight:


3063  MAPPING_SIDEMARKER_L_OUTPUT set to: OFF
3063  MAPPING_SIDEMARKER_R_OUTPUT set to: OFF

Enable Illumination of Exterior Door Handle LEDs when in Reverse


3070OVT_BEI_REUCKFAHRLICHT set to: aktiv

Turn on Fog Lights with Welcome Lights:


3063  MAPPING_NEBELSCHW_L_PART_OF_WL set to: werte=01
3063  MAPPING_NEBELSCHW_R_PART_OF_WL set to: werte=01

Activate Rear Fog Lights: (In conjunction with REM Module coding)
3068 NSL_Verbaut = Verbaut

Disable Headlight Washers


2
3080  WW_SCHEINWERFERREININUNG set to: nicht_aktiv

Auto Light Sensitivity Increase


3130RLS_DEF_FLC_SCHWELLWERT_SATZ set to: option below
3130RLS_FLC_SCHWELLWERT_SATZ set to: option below
Options:
normal = mornal
empfindlich = sensitive
sehr_empfindlich = very sensitive
unempfindlich = insensitive

Turn On Tail Lights with DRLs:


3063  MAPPING_TAGFAHRL_1_V_L_OUTPUT = tfl_l
3063  MAPPING_TAGFAHRL_1_V_R_OUTPUT = tfl_r
3063  MAPPING_TAGAHRL_2_V_L_OUTPUT = werte=04
3063  MAPPING_TAGAHRL_2_V_R_OUTPUT = werte=04

Activate Rear Fog Lights feature for lighting switch:


3063 Mapping_Nebelschlussl_L_output = nsw_l
3063 Mapping_Nebelschlussl_L_Function = nebelscheinwerfer
3063 Mapping_Nebelschlussl_R_output = nsw_l
3063 Mapping_Nebelschlussl_R_Function = nebelscheinwerfer

HKFM_LS Module:
*** May take up to 30 minutes to begin working after coding ***
Close/Open Rear Hatch from Fob & Kick Panel
3010SCH_FBD set to: aktiv – werte=01
3010SCH_TOEHKI set to: aktiv – werte=01
3010TASTER_FBD set to: aktiv – werte=01

HU_NBT:
Set cell phone ringer as primary
3001INBAND_RINGING set to: aktiv

Enable Siri Voice Control


3003CE_DEVICE_SPEECH_RECOGNITION set to: aktiv

Disable Auto-Locking of Doors once begin driving


3000DOOR_LOCK_AFTER_DRIVING_AWAY set to: nicht_aktiv

Enable Sports Displays


3000EFF_DYN_SPORT_CID set to: aktiv
3000EFF_DYN_SPORT_UNIT set to: aktiv
* To change units displayed to be ft lb and hp
KOMBI3008DREHMOMENT set to: lb_ft (displays ft lb)
KOMBI3008LEISTUNG set to: ps (displays hp)

Change Navi Voice to British English


3000LANGUAGE_ENGLISH_UK set to: master
3000LANGUAGE_ENGLISH_US set to: nicht_aktiv

3
Video-in-Motion activated:
3000  SPEEDLOCK_X_KMH_MAX werte = FF
3000  SPEEDLOCK_X_KMH_MIN werte = FF
3000  VIDEO_HANDBRAKE set to: nicht_aktiv
3000  VIDEO_FRONT_LOCKED set to: nicht_aktiv
3000  VIDEO_SPEEDLOCK_CONDITION set to: none=00

Navi Trip-Import
3000NAVI_TRIP_IMPORT set to: aktiv

Navi Fuel-Stop Proposal Along Route


3000NAVI_FUELSTOP_PROPOSAL set to: aktiv

Enable Video Files from USB


3000ENT_CODEC_OGG set to: aktiv
3000ENT_CODEC_XVID set to: aktiv
3000ENT_CODEC_XVCD set to: aktiv
3003API_USB_VIDEO set to: both

Add GPS Current Location to Navi Menu Items


3000NAVI_POSITION_MENU set to: aktiv

Enable the function of saving video files to NBT Hard Drive for play later
3000  ENT_MC_VIDEO_SUPPORT set to: aktiv

Disable Office Function Speed Lock-Out


3000 OFFICE_MESSAGES_SPEEDLOCK_CONDITION set to: nicht_aktiv

Enable Full Text Lines in Office While Driving


3003  PIM_DRIVING_TEXT_LENGTH set to: whole text_07

Disable Audible Chirp/Beep When Locking Car


3000  ACOUSTICAL_LOCK_CONFIRM set to: nicht_aktiv

Enable Speech Input for E-Mail or SMS


3003  SPEECH_2_TEXT set to: aktiv

Enable Time-Stamp Display for Call Log


3003  TIMESTAMP_DISPLAY set to: aktiv

Add Temperature & PSI to tire monitor screen


3001RDC_SAFETY set to: aktiv

Disable Legal Disclaimers


3001LEGAL_DISCLAIMER_TIME set to: kein_ld
3001MACRO_CAM_LEGALDISCLAIMER set to: kein_ld
3001MACRO_NIVICAM_LDISCLAIMER set to: kein_ld

Change i-Drive Animation to ///M Logo


3001STARTUP_EMBLEM set to: variant_01

4
Enable IPCE Web Server @ 172.16.222.1
3000IPCE_WEBSERVER set to: aktiv

Enable WiFi Hot-Spot


(Need to install a DLNA/UPnP media sharing server on your laptop or phone to be able to use this)
3000ENT_MC_WLAN_STREAM_DMP_COVERART set to: aktiv
3000ENT_MC_WLAN_STREAM_DMP_VIDEO set to: aktiv
3000ENT_MC_WLAN_STREAM_DMP set to: aktiv
3003WLAN_STATUS set to: aktiv
3003WLAN_MODUS set to: ap
3003WLAN_SIGNAL_STRENGTH set to: outdoor

Enable Developer Menu


3000  ENTWICKLER_MENUE set to: aktiv

IHKA Module:
A/C System Remembers Last Setting
3000OFF_MEMORY set to aktiv

Always Remember Air ReCirculating


3000MEMORY_UMLUFT set to: aktiv

KAFAS2 Module:
Enable Curb and Grass Detection for Lane Departure Warning System
3020  ROAD_EDGE_WARNING_ENABLED werte=02

KOMBI Module:
Show Digital Speed in MPH in Cluster
3000BC_DIGITAL_V set to: aktiv

Enable GPS-Sync for Clock


3000GPS_UHR set to: aktiv

PMA_PDC Module:
Enable Rear-View Camera at all Speeds
300BD_SCHWELLE_1_KMH set to: Werte = FF
300BD_SCHWELLE_2_KMH set to: Werte = FF
300BV_SCHWELLE_1_KMH set to: Werte = FF
300BV_SCHWELLE_2_KMH set to: Werte = FF

You might also like