Scribd
Upload
80 views1 page

Appm Kraftliner 2020

This document provides technical specifications for kraftliner produced by Arkhangelsk Pulp and Paper Mill, JSC located in Novodvinsk, Arkhangelsk Region, Russia. It lists properties such as substance, bursting strength, water absorption, ring crush test values, air resistance, and moisture content for kraftliner grades ranging from 80 to 275 grams per square meter. Test methods used include GOST, ISO, and internal standards. Contact information is provided for the mill.

Uploaded by

arcepp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
80 views1 page

Appm Kraftliner 2020

This document provides technical specifications for kraftliner produced by Arkhangelsk Pulp and Paper Mill, JSC located in Novodvinsk, Arkhangelsk Region, Russia. It lists properties such as substance, bursting strength, water absorption, ring crush test values, air resistance, and moisture content for kraftliner grades ranging from 80 to 275 grams per square meter. Test methods used include GOST, ISO, and internal standards. Contact information is provided for the mill.

Uploaded by

arcepp
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Arkhangelsk Pulp and Paper Mill, JSC

1, Melnikov st., Novodvinsk


Arkhangelsk reg., Russia, 164900
Phone: +7(81852) 6-35-00
Fax: +7(81852) 6-32-31
www.appm.ru
[email protected]
KRAFTLINER
Technical Parameter Test method

80+/- 90+/- 100+/- 110+/- 115+/- 125+/- 135+/- 140+/- 150+/- 170+/- 175+/- 186+/- 200+/- 225+/- 250+/- 275+/- GOST 13199/
1. Substance, g/m2
2.4 2.7 3.0 3.3 3.4 3.7 4.1 4.2 4.5 5.1 5.4 5.6 6.0 6.8 7.5 8,3 ISO 536
GOST 13525.8
Typical value 400 450 500 550 580 640 700 700 740 820 820 850 920 950 1000 1100
2. Absolute bursting strength, kPa /
minimum value 320 360 400 450 480 540 580 580 640 720 720 750 820 850 900 1000 ISO 2759
3 Surface water absorption of the
Maximum 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 GOST 12605 /
top side, Cobb60, g/m2
ISO 535
bottom side 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100 40-100
4. RCT (CD), N, strip width – 12.7 Typical value 120 150 170 200 240 250 270 330 350 400 420 450 480 520 GOST 10711 /
mm. minimum value 90 120 140 170 200 210 230 280 280 330 360 380 410 450 ISO 12192
5. Air resistance, sec. Guaranteed value 30 30 30 30 30 30 30 30 40 40 40 50 50 50 50 50 ISO 5636-5
Typical value 1,5 1,8 2,1 2,3 2,4 2,5 2,8 2,8 3,1 3,6 3,6 4,0 4,2 4,6 5,1 5,4
6. SCT (CD), kN/m ISO 9895
minimum value 1,2 1,5 1,8 2,0 2,1 2,1 2,4 2,4 2,6 3,0 3,1 3,4 3,6 4,0 4,5 4,8
GOST
7. Moisture, %. 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 6-9 13525.19 / ISO
287
minimum - means guaranteed value
Tested at 23 0C 50%RH

ISO 9001:2008
ISO 14001:2004

tech data are valid for 2020

You might also like