Scribd
Upload
17 views

Project: Loading Calculation

This document provides a summary of the loading calculation for an existing beam check. It includes the design code, partial safety factors for materials, and load combinations. The span length is 5.3m, self weight of the beam is 1.6kN/m, slab weight is 4.0kN/m, dead load total is 5.6kN/m, imposed load is 1.4kN/m, factored load is 10.1kN/m, shear capacity is 17.9kN, and bending moment at L/√3 is 18.3kN-m.

Uploaded by

mayphyo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
17 views

Project: Loading Calculation

This document provides a summary of the loading calculation for an existing beam check. It includes the design code, partial safety factors for materials, and load combinations. The span length is 5.3m, self weight of the beam is 1.6kN/m, slab weight is 4.0kN/m, dead load total is 5.6kN/m, imposed load is 1.4kN/m, factored load is 10.1kN/m, shear capacity is 17.9kN, and bending moment at L/√3 is 18.3kN-m.

Uploaded by

mayphyo
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Section : 2EB3a

Type : Existing Beam Check


Design Code : BS8110 , BS5950
Prepared By : Date : 7/4/2020
Project Checked By : Job ID :

LOADING CALCULATION
Partial Safety Factor
Steel 'γms' = 1.15
Material
Concrete 'γmc' = 1.25
Dead 'γf' = 1.40
Load
Live 'γf' = 1.60

5 10 DL
L
1 3 LL
9 18 R

TL Load Case
Span Length, L = 5.3 m
Span Width, L1 = 1.9 m
Self Weight of Beam = 150 x 450 x 24.0 = 1.6 KN/m
Slab Weight (+ SDL+M&E ) (A1) = 0.5 x 4.2 x 1.9 = 4.0 KN/m
Other = 0.5 x 0 x 1.9 = 0 KN/m
Wall Load (150 thk) = 3.0 x 0.0 x 1.0 = 0 KN/m
DLTotal = 5.6 KN/m
Imposed Load (LL) = 0.5 x 1.5 x 1.9 = 1.4 KN/m
LLTotal = 1.4 KN/m
Wu, (DL+LL) = 10.1 KN/m
Vu = wL/3 = 17.9 KN
Mu (@ L/√3) = wL^2 / 9*√3 = 18.3 KN-m

You might also like