Scribd
Upload
25 views

Enter Your Company Name

This document provides instructions for setting up and using a sound level meter system. It describes how to configure company information and measurement settings in the system setup. It also explains how to perform online measurements by starting and stopping real-time measurement, clearing data, and saving or printing results. The document notes that imported data from the sound level meter will display as a data curve.

Uploaded by

brayan gaviria
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
25 views

Enter Your Company Name

This document provides instructions for setting up and using a sound level meter system. It describes how to configure company information and measurement settings in the system setup. It also explains how to perform online measurements by starting and stopping real-time measurement, clearing data, and saving or printing results. The document notes that imported data from the sound level meter will display as a data curve.

Uploaded by

brayan gaviria
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

1).

System setup：

Click“Option” >“Config ”or click to enter the “Config ”the default setup is “Miscellaneous Option”. Enter the company name
if you need, click “Ok”to confirm the setting.
As the following picture showns:

Enter your company name

OK

Click“SPL Unit Setting”to setup the following items:


Measurement range, Max work mode, Sample speed, weight,ect. Then click “OK”to confirm.
As the following picture showns：

Measure range select


Sampling rate

Weight select
MAX mode

OK

Click “PC Software Setting”to setup the Low/ High dB Alarm, and the Alarm sound ON/OFF.Then click “OK”to confirm.
As the following picture showns：

Set lowest DB alarm

Set highest DB alarm

Alarm switsch

OK
2). On line measurement:

Click Real Time Measure in File menu bar or Real Time Measure button in tool column will enter into the window as the following
picture showns:

Maximize screen

Button instructions:

Button Function
Click to start real-time measurement
Click to stop real-time measurement
Click to clear all the measuring data
Click to store real-time measuring data, input file
name in popup window, click to save the document
format of Lab.
Click to print curve diagram
Zoom in curve diagram
Zoom out curve diagram
Reset zoom, resume to defaulted value
Move curve diagram to left or right

Click the “Import” in File menu bar or “Import” button on tool column will popup as the following picture showns:

Click “Start to Import”to import the data stored in the sound level meter, which will display as Data curve！

NOTE:
This software supports to print measuring data curve diagram, for details please refer to HELP content.

You might also like