Scribd
Upload
1K views4 pages

Robotics Quiz - With Answer

The document is a robotics quiz with 18 multiple choice questions testing knowledge about robots. Some key points covered include: 1) The word robot comes from the Czech word "robota" meaning forced labor. 2) A robot is a programmable multi-functional manipulator. 3) The main objectives of industrial robots are to minimize labor, increase productivity, and enhance machine life.

Uploaded by

Satheesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views4 pages

Robotics Quiz - With Answer

The document is a robotics quiz with 18 multiple choice questions testing knowledge about robots. Some key points covered include: 1) The word robot comes from the Czech word "robota" meaning forced labor. 2) A robot is a programmable multi-functional manipulator. 3) The main objectives of industrial robots are to minimize labor, increase productivity, and enhance machine life.

Uploaded by

Satheesh Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Robotics Quiz – I

1-Robot is derived from Czech word

(A) Rabota (B) Robota

(C) Rebota (D) Ribota

2-A Robot is a

(A) Programmable (B) Multi functional manipulator

(C) Both (A) and (B) (D) None of the above

3-The main objective(s) of Industrial robot is to

(A) To minimise the labour requirement (B) To increase productivity

(C) To enhance the life of production machines (D) All of the above

4-The following is true for a Robot and NC Machine

(A) Similar power drive technology is used in both

(B) Different feedback systems are used in both (C) Programming is same for both

(D) All of the above

5-Match the following

Robot part Function

a. Manipulator arm 1. For holding a piece or tool


b. Controllers 2. Move the manipulator arm and end effector
c. Drives 3. Number of degrees of freedom of movement
d. Gripper 4. Delivers commands to the actuators

(A) a-1, b-4, c-2, d-3


(B) a-3, b-4, c-2, d-1

(C) a-3, b-2, c-4, d-1

(D) a-4, b-3, c-2, d-1

6-Drives are also known as

(A) Actuators (B) Controller

(C) Sensors (D) Manipulator

7-Clockwise of Anti clockwise rotation about the vertical axis to the perpendicular arm is
provided through

(A) Shoulder swivel (B) Elbow extension

(C) Arm sweep (D) Wrist bend

8-Radial movement (in & out) to the manipulator arm is provided by

(A) Elbow extension (B) Wrist bend

(C) Wrist swivel (D) Wrist yaw

9-Industrial Robots are generally designed to carry which of the following coordinate
system(s).
(A) Cartesian coordinate systems (B) Polar coordinate systems

(C) Cylindrical coordinate system (D) All of the above

10-The Robot designed with Cartesian coordinate systems has

(A) Three linear movements (B) Three rotational movements

(C) Two linear and one rotational movement (D) Two rotational and one linear movement

11-The Robot designed with Polar coordinate systems has


(A) Three linear movements (B) Three rotational movements

(C) Two linear and one rotational movement (D) Two rotational and one linear movement

12-The Robot designed with cylindrical coordinate systems has

(A) Three linear movements (B) Three rotational movements

(C) Two linear and one rotational movement (D) Two rotational and one linear movement

13-Which of the following work is done by General purpose robot?

(A) Part picking (B) Welding

(C) Spray painting (D) All of the above

14-The following drive is used for lighter class of Robot.

(A) Pneumatic drive (B) Hydraulic drive

(C) Electric drive (D) All of the above

15-Internal state sensors are used for measuring __________ of the end effector.

(A) Position (B) Position & Velocity

(C) Velocity & Acceleration (D) Position, Velocity & Acceleration

16-Which of the following sensors determines the relationship of the robot and its environment
and the objects handled by it

(A) Internal State sensors (B) External State sensors

(C) Both (A) and (B) (D) None of the above

17-Which of the following is not a programming language for computer controlled robot?

(A) AMU (B) VAL (C) RAIL (D) HELP


 

18-In which of the following operations Continuous Path System is used

(A) Pick and Place (B) Loading and Unloading

(C) Continuous welding (D) All of the above

ANSWERS:

1-(B), 2-(C), 3-(D), 4-(A), 5-(B), 6-(A), 7-(C), 8-(A), 9-(D), 10-(A), 11-(D), 12-(C), 13-(D), 14-(A),
15-(D), 16-(C), 17-(A), 18-(C)

You might also like