Scribd
Upload
125 views2 pages

Ribbon Anodes Water 00

3C Corrosion Control Company manufactures titanium ribbon anodes coated with mixed metal oxide for use in impressed current cathodic protection systems. The standard anode consists of a titanium ribbon coated with a ruthenium and iridium oxide coating designed for use in fresh water, brackish water, and seawater. The coating has proven superior in tests and strict quality control is used in the coating process to ensure proper adhesion and loading.

Uploaded by

Soltani Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
125 views2 pages

Ribbon Anodes Water 00

3C Corrosion Control Company manufactures titanium ribbon anodes coated with mixed metal oxide for use in impressed current cathodic protection systems. The standard anode consists of a titanium ribbon coated with a ruthenium and iridium oxide coating designed for use in fresh water, brackish water, and seawater. The coating has proven superior in tests and strict quality control is used in the coating process to ensure proper adhesion and loading.

Uploaded by

Soltani Ali
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Ribbon Anodes

For use in water

3C Corrosion Control Company AB is Manufactur- tection industry to be satisfactory for both chlorine
ing Mixed Metal Oxide (MMO) ribbon anodes used and oxygen evolving electrolytes.
especially for Impressed Current cathodic protec-
tion Systems. Based on accelerated life testing conducted by an
independent laboratory, the coating has proven to
The standard band anode consists of a titanium be superior or equivalent to other mixed metal ox-
ribbon that has been coated with mixed metal oxide ide coating currently being used. A copy of this test
coating. report is available upon request.

The titanium substrate meets ASTM standard Strict quality control procedures are followed
B348, grade 1 or grade 2. throughout the coating process to insure proper
coating adhesion and loading. Production of a
Ribbon anodes are available in standard length’s of quality product makes every step of the manufac-
1, at two different sizes (ribbon width) 25.4 and turing process fundamental.
12.7 mm. Other sizes and current ratings are avail-
able upon request. MMO anodes have an extremely low consumption
rate. The titanium substrate remains constant
The MMO coating applied to the titanium ribbon throughout the design life of the anode.
hasbeen designed for use in all cathodic protection
applications. The coating consist of IrO2/RuO. MMO The 3C ribbon anode is suitable for operations in
coating is generally accepted by the cathodic pro- fresh water, brackish water and sea water.
Ribbon Anode water Rev 00 2012

3C Corrosion Control Company Ribbon Anodes water 2012 Tel: +46 418 411 900
Billeberga Station, Stationsplan 5 Page 1 of 2 Telefax: +46 418 411 935
268 03 Billeberga, Sweden E-mail: [email protected]
Ribbon Anodes
For use in water

The ribbon anodes have the following operational charactaristics for standard coating loadings in sea water:

Anode Width (net)mm Anode Length (net)mm Max. Current Output Cable Size Cable Entry
2
21.4 850 10.9 Ampere 1x10 mm Bottom/Side
2
10.9 850 5.5 Ampere 1x10 mm Bottom/Side

uPVC housing Dimensions:

Width mm Length mm Height mm Mounting

245 1150 35 M10 Nylon Studs, Wacher and Nuts

Side Cable Entry—Front View:

Bottom Cable Entry—Side View:


Ribbon Anode water Rev 00 2012

3C Corrosion Control Company Ribbon Anodes water 2012 Tel: +46 418 411 900
Billeberga Station, Stationsplan 5 Page 2 of 2 Telefax: +46 418 411 935
268 03 Billeberga, Sweden E-mail: [email protected]

You might also like