Scribd
Upload
94 views2 pages

Section-05 RJT RJTW

hola

Uploaded by

Sandro gomez castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views2 pages

Section-05 RJT RJTW

hola

Uploaded by

Sandro gomez castro
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

RJT & RJTW Series

Technical Data:
Aluminum
• Extrusion – C/S uses multiple alloys & tempers which are
established to be the most appropriate for the given use of
individual parts. Will be one of the following: (6063-T5, T6, T52)
(6061-T5, T6, T51) (6105-T5, T6) (6005-T5) (6005A-T5, T61),
ASTM B221
Duroflex Gasket
• Single Durometer – 85 Shore A, ASTM D2000
• Color – Gray
Vapor Barrier
• Material – Polyethylene, ASTM E-1745-97
• Color – Black
• 3” Tensile Strength – 275 lbs., ASTM-882
• Puncture Strength – 72 lbs., ASTM-4833
• PPT Resistance – 45 lbs., ASTM-2582
Turnbar
• Injection Molded

Product Description:
Aluminum roof covers comprised of extruded aluminum compo-
nents, injection molded turnbar, duroflex gaskets and polyethylene
vapor barrier.

Use This Cover For:


• Roof joint applications where occasional access is expected.
• Applications where exterior seals are used in walls and watertight
transitions are critical.

Performance Characteristics:
Available for movement of up to 100% of joint width in all horizontal
directions. Available with custom factory made transitions to ensure
watertight results.

Standard Finishes:
Mill finish. Powder coat & Kynar® options available.

Installation Guidelines:
Finish roof membrane up onto wooden curbs. Apply vapor barrier
over roof membrane. Adjust angle on aluminum side frame to suit
angle of curb (up to 90°) and fasten through membrane and vapor
barrier with fasteners provided. The cover plate is retained by the in-
jection molded turnbars, which engage in the frames. (Note: all butt
splices and factory made transitions to be installed in accordance
with manufacturer’s recommended sequencing.) For complete in-
stallation instructions, please visit www.c-sgroup.com.

To download detail, specs & photos visit www.c-sgroup.com


For technical and design assistance call 800-233-8493.
5.51
C/S Expansion Joint Covers Technical Manual

MODEL JOINT WIDTH MINIMUM MAXIMUM EXPOSED BLOCKOUT WIDTH BLOCKOUT


OPENING OPENING SURFACE HEIGHT
RJT-100 1.00" (25mm) 0.13" (3mm) 2.63" (67mm) 5.75" (146mm) N/A N/A
RJT-200 2.00" (51mm) 0.13" (3mm) 3.63" (92mm) 5.75" (146mm) N/A N/A
RJTW-100 1.00" (25mm) 0.13" (3mm) 2.38" (60mm) 3.88" (99mm) N/A N/A
RJTW-200 2.00" (51mm) 0.13" (3mm) 2.88" (73mm) 3.88" (99mm) N/A N/A

EXPOSED SURFACE
MOISTURE SEAL
TURN BAR

ALUMINUM COVER PLATE

ALUMINUM FRAME

JOINT VAPOR BARRIER


WIDTH

RJT

EXPOSED SURFACE

ALUMINUM
COVER PLATE
MOISTURE SEAL

ALUMINUM FRAME

VAPOR BARRIER

JOINT
WIDTH

RJTW

© Copyright 2015 Construction Specialties, Inc.


V 6-15
5.52

You might also like