2018

Amazon AppStream 2.0: SAP GUI Deployment Guide

Build an Amazon AppStream 2.0 environment to stream SAP GUI to
your users

May 2018

https://aws.amazon.com/appstream2/

1
Welcome
This guide describes how to deploy and stream desktop applications for your company
(in this example, DemoCo) by using Amazon AppStream 2.0, a fully managed, secure
application streaming service that runs in the AWS Cloud.

What you’ll accomplish:

• Provision an Amazon virtual private cloud (Amazon VPC) to provide an isolated

virtual network infrastructure within the AWS Cloud. Your AppStream 2.0
resources will use this environment.

• Use the AWS Management Console to perform the basic administrative tasks
required to build an AppStream 2.0 environment. Specifically, you’ll:

1. Install and configure SAP GUI for streaming using an image builder.

2. Provision a fleet of instances to stream SAP GUI. The fleet will use the
Standard instance type and adhere to scaling policies to match the
number of users that you want to be able to stream concurrently.

3. Provision a stack to create a web portal from which users can stream your
application.

4. Configure persistent storage that users can access across application

streaming sessions.

5. Create a user pool to manage users who access your streaming

applications.

What you need before starting:

• An AWS account: You need an AWS account to use AppStream 2.0 and other
AWS services. For information about how to sign up for and activate an AWS
account, see Appendix A.

• A current email address: During the user configuration process for your
AppStream 2.0 environment, AWS sends you two emails. You must use these
emails to complete the process.

2
• Skill level: You do not need prior experience with AWS to complete these
exercises. A basic understanding of desktop computing is helpful but not
required.

• SAP Product License: You need an active SAP product license that allows you
to deploy and stream SAP GUI application using AppStream 2.0.

• SAP Server Environment: Before you begin to deploy SAP GUI frontend
application on AppStream 2.0, you should have your SAP server running on
AWS and accessible via the Amazon VPC that you will use with Amazon
AppStream 2.0. To learn how to build your SAP environment on AWS, refer the
SAP whitepapers from here.

3
Contents
Welcome ................................................................................................................................................. 2
Step 1. Sign in to the AWS Management Console and select an AWS Region............................................ 6
Step 2: Create network resources ............................................................................................................ 7
Step 3: Create an AppStream 2.0 image builder ....................................................................................... 9
Deploy an image builder instance to install applications ...................................................................... 9
Step 4: Connect to the image builder and install applications ................................................................ 13
Connect to the image builder instance ............................................................................................... 13
Download application installation files to your image builder instance............................................... 15
Install the applications ....................................................................................................................... 15
Step 5: Configure applications ............................................................................................................... 18
Disable Internet Explorer Enhanced Security Configuration................................................................ 18
SAP Logon Configuration.................................................................................................................... 20
Installing additional software for use along with SAP GUI for Windows .............................................. 20
Step 6: Use Image Assistant to create an AppStream 2.0 image ............................................................. 21
Create your AppStream 2.0 application catalog.................................................................................. 21
Test your applications by using a local user account ........................................................................... 23
Optimize the launch performance of your applications ...................................................................... 23
Configure the image .......................................................................................................................... 24
Step 6: Provision a fleet ......................................................................................................................... 25
Provide fleet details ........................................................................................................................... 26
Choose an image ............................................................................................................................... 26
Configure the fleet............................................................................................................................. 26
Configure the network ....................................................................................................................... 28
Step 7: Create an AppStream 2.0 stack and a streaming URL.................................................................. 29
Provide stack details and associate the stack with a fleet ................................................................... 30
Enable persistent storage for the stack .............................................................................................. 30
Create a streaming URL ..................................................................................................................... 31
Step 8: Manage user access with an AppStream 2.0 user pool ............................................................... 33
Create a user ..................................................................................................................................... 34
Assign a stack to the user ................................................................................................................... 34
Step 9: Test the end user authentication and application streaming experience .................................... 35
Step 10: Take the next step with AppStream 2.0 .................................................................................... 37

4
Appendix A: Create and activate an AWS account .................................................................................. 40
Create your AWS account .................................................................................................................. 40
Add a payment method ..................................................................................................................... 41
Verify your phone number ................................................................................................................. 41
Choose an AWS Support plan ............................................................................................................. 41
Watch for three AWS account confirmation emails ............................................................................ 42
Appendix B. Manually create and configure network resources ............................................................. 43
AppStream VPC requirements............................................................................................................ 44
Allocate an Elastic IP address ............................................................................................................. 44
Create a VPC by using the VPC Wizard ............................................................................................... 44
Add a second private subnet .............................................................................................................. 46
Modify the subnet route tables.......................................................................................................... 47
Appendix C. Clean up your AppStream 2.0 resources.................................................................... 50
Stop and delete your image builder ................................................................................................... 50
Revoke stack permissions for users in the user pool ........................................................................... 50
Disassociate your fleets from your stack and delete your stack .......................................................... 50
Stop and delete your fleet ................................................................................................................. 50

5
Step 1. Sign in to the AWS Management Console and
select an AWS Region
If you do not have an AWS account, you must first complete the steps in Appendix A.

1. Sign in to the AppStream 2.0 console at

http://console.aws.amazon.com/appstream2.

2. Type your email address or your AWS account ID, and choose Next.

3. Type your AWS account password, and choose Sign In.

4. In the menu in the upper right corner of the console, select the AWS Region for
your environment. AWS currently hosts services in 18 different geographical areas.

5. Select one of the following seven Regions in which AppStream 2.0 is available:

Figure 1: Available AWS Regions for AppStream 2.0.

6
Step 2: Create network resources
Amazon AppStream 2.0 Fleet is deployed in Amazon Virtual Private Cloud (VPC) and
need access to the SAP Servers. AppStream 2.0 can be deployed in an existing VPC
where SAP servers are deployed or in to a new VPC.

In this section, you will create a separate Amazon virtual private cloud (VPC) and other
network resources required for your AppStream 2.0 environment. The following steps
use a template in AWS CloudFormation to automatically create and configure the
necessary network resources. To manually create and configure network resources,
see Appendix B.

1. Make sure that you are signed in to the AWS Management Console.

2. In the following list of regional choices, open the link associated with the AWS
Region in which you want to build your AppStream 2.0 environment.

• US East (N. Virginia)

• US West (Oregon)

• EU (Frankfurt)

• EU (Ireland)

• Asia Pacific (Singapore)

• Asia Pacific (Sydney)

• Asia Pacific (Tokyo)

The AWS CloudFormation console displays the URL of a template that is used to
create your network resources and the name of the resulting AWS CloudFormation
stack.

3. In the bottom right corner of the window, choose Create. AWS CloudFormation
starts creating the resources and displays a status message to indicate progress.

7
 Figure 2: Using a template in AWS CloudFormation to create network resources.

4. When the creation process completes, usually within five minutes, the AWS
CloudFormation console displays the status CREATE_COMPLETE.

5. Navigate to the Amazon VPC console at https://console.aws.amazon.com/vpc/.

6. In the navigation pane, under Virtual Private Cloud, choose Your VPCs. In the
list of VPCs, you should see the following VPC that was automatically created:

Figure 3: VPC created by AWS CloudFormation.

Note: The VPC ID value will differ for your VPC.

7. In the navigation pane, under Virtual Private Cloud, choose Subnets. In the list of
subnets, you should see the following subnets that were automatically created:

8
 Figure 4: Subnets created by AWS CloudFormation.

Note: The Subnet ID and VPC values will differ for your subnets.

8. You have now successfully created your network resources by using AWS
CloudFormation. You can proceed to Step 3.

Before proceeding to creating your AppStream 2.0 environment, you have to make
your SAP server environment accessible through the Amazon VPC that you just
created. This can be accomplished by enabling VPC Peering between the VPC’s
where SAP servers are deployed and the APP Stream VPC. To learn more about
Amazon VPC configuration for SAP, refer the blog post series from here.

Step 3: Create an AppStream 2.0 image builder

AppStream 2.0 uses EC2 instances to stream applications. You launch instances from
base images, called image builders, which AppStream 2.0 provides. To create your own
custom image, you connect to an image builder instance, install and configure your
applications for streaming, and then create your image by creating a snapshot of the
image builder instance.

To install and configure applications to stream to your users, you must create an image
builder instance as described in the following procedure.

Deploy an image builder instance to install applications

1. Open the AppStream 2.0 console at https://console.aws.amazon.com/appstream2.

2. If you have not previously configured any AppStream 2.0 settings, the following
page appears:

9
 Figure 5: The AppStream 2.0 first experience page.

Note: If the AppStream 2.0 navigation page appears instead, skip to step 5.

3. Choose Get started.

4. In the lower right corner of the page, choose Skip (this guide walks you through a
different process for getting started with AppStream 2.0).

Figure 6: AppStream 2.0 getting started options.

5. In the navigation pane, choose Images, Image Builder, Launch Image Builder.

6. In the Step 1: Choose Image window, in the list of images, select the image
builder with the name Base-Image-Builder-mm-dd-yyyy, where mm-dd-yyyy
represents the most recent date. Base images include the latest updates to

10
 Microsoft Windows and the AppStream 2.0 agent software. You use this base
image to create a custom image that includes your own applications.

Figure 7: Choosing an image builder.

7. At the bottom of the page, choose Next.

8. In Step 2: Configure Image Builder, the following image builder configuration

options are displayed:

11
 Figure 8: Image builder configuration options.

9. Type the following information and then choose Review.

Configure image builder fields

Option Value

Name Provide a unique name identifier for the image builder,

such as DemoCo_Image_v1_mmddyyyy, using any of the
following characters: a-Z,0–9,-,_,.

Display Name Provide an optional name, such as DemoCo Image v1

April 2018, to be displayed in the console for easier
reference and readability.

Instance Type Accept the default value General Purpose.

Instance Family Select stream.standard.medium from the list of available

instance types.

Choose Next to continue to Step 3: Configure Network and then type the following
information

Default Internet Access Make sure that this option is not selected.

VPC Select the option corresponding to AppStream 2 VPC.

12
 Option Value

Subnet Select the subnet with the IP address range 10.0.1.0/24

(AppStream2 Private Subnet1).

Security group(s) Accept the default security group listed.

Active Directory Domain Do not configure any options.

(Optional)

10. Choose Review, and confirm the details for the image builder. To change the
configuration for any section, choose Edit and make your changes.

11. After you finish reviewing the configuration details, choose Launch. If an error
message notifies you that you don’t have sufficient limits to create the image
builder, submit a limit increase request through the AWS Support Center. For more
information, see AWS Service Limits.

12. The image builder creation process takes about 15 minutes to complete. During
this process, the status of the image builder displays as Pending while AppStream
2.0 provisions the necessary resources.

13. Click the Refresh icon periodically to update the image builder status. After the
status changes to Running, the image builder is ready to use and you can create
a custom image.

Note: Charges accrue for an image builder instance while it is running, even if no
user is actively connected. You can stop or delete the image builder at any time.
No user fees are incurred when users connect to an image builder. For more
information, see AppStream 2.0 Pricing.

Step 4: Connect to the image builder and install

applications
Now that you have provisioned an image builder, you can use it to install and configure
the applications to stream to users. First, you must establish a remote connection to the
instance to install and configure your applications.

Connect to the image builder instance

1. Open the AppStream 2.0 console at https://console.aws.amazon.com/appstream2.
13
2. In the navigation pane, choose Images, Image Builder.

3. Select the image builder instance that you created earlier

(DemoCo_Image1_mmddyyyy). Verify that its status is Running and choose
Connect.

Figure 9: Choosing an image builder instance.

Note: If the status is Stopped, select the instance, and choose Actions, Start.
Click the Refresh icon periodically to update the instance list until the status is
Running.

4. The new browser tab opens, displaying options for logging into the image builder
instance. Choose Local User, Administrator.

Figure 10: The image builder instance login options window.

Note: If a new browser tab does not open, configure your browser to allow pop-
ups from https://console.aws.amazon.com/.

5. After a few moments, you are connected to the image builder instance with
administrator rights.

14
Download application installation files to your image builder instance
In this exercise, you use a browser to download and install the following two
applications:

• SAP GUI software - http://support.sap.com/swdc

1. Launch Mozilla Firefox by opening the Firefox icon on the image builder instance
desktop.

• If prompted by the Firefox Import Wizard, choose Don't import anything,

Next.

• If prompted to sign in to Firefox, choose Skip this step.

• If Firefox displays a notification that the application is out of date, close the
notification.

• If prompted to set a default browser, choose Use Firefox as my default

browser.

• If prompted by Windows to decide how to open HTTP links, choose the

Firefox icon.

2. Open Firefox and navigate to the following URL to download the full SAP GUI
installer: http://support.sap.com/swdc

3. Login using SAP account and download the latest version of SAP GUI for
Windows.

4. When prompted, choose Save File. The SAP GUI will be downloaded to the
Downloads folder.

5. Close Firefox, and if prompted, choose Close tabs.

Install the applications

1. Open File Explorer by clicking the folder icon on the taskbar.

2. Select the Downloads folder to open it. The SAP installation files are downloaded
to this folder.

15
3. Extract the installation package to a local folder.

4. Navigate to the following path to identify the installation guide for SAP GUI on
Windows. Make user you don’t extract the installation files to Temporary Files.
You will have to restart the image builder before starting the installation.
Temporary Files will be cleared when image builder is restarted.

<extractedfolder>\ BD_NW_7.0_Presentation_7.50_Comp._2_\PRES1\DOCU\

5. To install SAP GUI, navigate to the following folder and launch SAPGUISetup.exe.
If you want to include all the front end components along with the SAP GUI,
launch SetUpAll.exe.

<extractedfolder>\BD_NW_7.0_Presentation_7.50_Comp._2_\PRES1\GUI\WIN
DOWS\WIN32 and launch the Setup application SAPGUISetup.exe

6. On launch, in case the installer recommends you to reboot the image builder
before continuing further. Please proceed and restart the image builder either by
initiating restart from the instance or by choosing Actions -> Stop and Actions ->
Start from the AWS management console.

16
7. Once the image builder is in running status again, connect to the image builder as
Administrator.

8. Relaunch the SAP GUI installer SAPGUISetup.exe or SetupAll.exe.

9. Selected all the components except SAP Automatic Workstation Update and
proceed with the installation by choosing Next.

10. The installation wizard might prompt you to enter or change information to
customize the installation of the selected products, such as the installation folder.
Choose defaults and complete the installation.

11. Once SAP GUI is fully installed, you will see a success message as shown below.

17
 12. You have now installed SAP GUI. The next step is to configure SAP Logon and
Internet Explorer applications before creating the image with SAP GUI.

Step 5: Configure applications

Disable Internet Explorer Enhanced Security Configuration
When you launch the SAP GUI after installation, you will see a warning message. This
behavior is due to the Internet Explorer Enhanced Security Configuration, a security
setting of IE that blocks access to web content and application scripts for security
reasons. We can safely disable this setting to enable SAP GUI. To disable this feature
for AppStream 2.0 users, do the following.

1. Connect to your image builder as Administrator.

2. Open Server Manager from the Windows Task bar.

3. Choose Local Server -> IE Enhanced Security Configuration.

4. Choose Off option for both Administrators and Users.

18
5. Choose Admin Commands -> Switch User -> Template User to switch to
Template User account.

6. Once you are logged into the Template User account, launch Internet Explorer.

7. Choose Settings -> Internet Options from the top right menu of Internet Explorer.
In the prompted dialog, choose Advanced.

8. Click the Reset button. Click Reset again in the prompted dialog. Close Internet
Explorer.

9. Switch to Administrator account. Launch Image Assistant. Choose Next to

proceed to the Configure step. From this tab, click Save settings. This will save
the template user settings as default user settings.

10. Switch to test user. Launch Internet explorer. Confirm that the message “Internet
Explorer Enhanced Security configuration is not enabled” is displayed in the home
page. Browse to any website to confirm that IE is not displaying any blocking
prompts.

19
SAP Logon Configuration
Refer to the SAP UI Landscape Configuration Guide, available within the extracted
installation package, for detailed explanation of different options available to configure
SAP Logon client to access SAP servers. The steps detailed below are based on SAP
OSS Note - 2075150 - SAP Logon (Pad) 740: New format of configuration files as
of SAP GUI for Windows 7.40.

1. Launch SAP GUI and choose Create for adding a new SAP server entry to the
client. On the prompted dialog, provide the server details - IP Address/Network
Alias, SAP System No and SAP System ID. Note that the SAP server must be
accessible through the VPC you created earlier. This document does not cover the
installation and configuration of SAP backend server.

2. Move the SAP GUI configuration file from to a location under C:\ such that it is
accessible to all AppStream 2.0 users. In this case, copy all the files from
C:\Users\ImageBuilderAdmin\AppData\Roaming\SAP\Common to C:\Program
File (x86)\SAP\guiconfig\

Note: Before copying the files please enable option to show hidden files, else the
AppData folder will not be visible

3. Create a Windows system environment variable as follows.

Env variable name: SAPLOGON_LSXML_FILE

Env variable value: C:\Program File (x86)\SAP\guiconfig\SAPUILandscape.xml

Installing additional software for use along with SAP GUI for Windows
Additional software may be required to use SAP GUI for Windows (like Microsoft
Office or a Single-Sign-On product) based on the SAP transactions that you want to
execute. Please install the necessary supporting applications before proceeding to the
next step.

20
Step 6: Use Image Assistant to create an AppStream 2.0
image
At this point, you have launched an image builder instance, installed and configured
SAP GUI. Now you’ll prepare the application for streaming, optimize it for streaming
performance, and create your image.

In this section, you’ll do the following:

• Create an application catalog by using Image Assistant.

• Test SAP GUI by using a local user account that has the same permissions that
end users will have in their streaming sessions.

• Optimize the application’s launch performance.

• Configure the image.

• Finish creating the image.

Create your AppStream 2.0 application catalog

The process of creating an AppStream 2.0 application catalog includes specifying the
name, display name, executable file to launch, and icon to display for each application
that you plan to stream.

1. From the image builder desktop, open Image Assistant.

2. In the Add Applications to Image dialog box, on the Add Apps tab, choose Add
Application.

21
 Figure 11: The Add Applications to Image dialog box in Image Assistant.

3. Navigate to the location of the SAP GUI executable file (C:\Program Files
(x86)\SAP\FrontEnd\SAPgui), select the SAP GUI executable file, and then choose
Open.

4. Review the application properties displayed and choose Save.

Property Description

Name A unique identifier for the application

Display name The name of the application that is displayed to end users. You
can change the name to one that is meaningful for your end
users.

Launch Path The location of your application executable

Icon Path The location of your application icon. Optionally, you can
change the default icon to a high-resolution PNG file.

Launch Parameters Command line arguments that can be passed to the application
at launch.

Working Directory Leave this blank.

22
 5. SAP GUI is now added to the application catalog that will be displayed to the user.

Test your applications by using a local user account

An image builder includes a test user account that enables you to test your applications
by using the same policies and permissions as your users. Follow these steps to
confirm that your applications open correctly.

1. In the Test tab, choose Switch User, Test User.

You are now logged into the same Windows Server 2012 R2 instance as a local
user who has regular (non-administrative) user rights.

2. Open Image Assistant. In Test Applications, the SAP GUI application will be
displayed.

3. Choose the application to launch SAP GUI. Connect to the SAP backend and test
the transactions that you are interested in.

4. Once you have completed the testing, Choose Switch User using the Admin
Commands menu available on the top right corner of the image builder web
toolbar.

5. On the Local User tab, choose Administrator. You will be connected back into
the image builder as Administrator.

6. On the Image Assistant Test tab, choose Next.

Optimize the launch performance of your applications

During this step, Image Assistant opens your applications one after another, identifies
their launch dependencies, and performs optimizations to ensure that applications
launch quickly.

1. On the Optimize tab, choose SAP GUI, Launch.

2. Wait for SAP GUI to completely start, as prompted by a message dialog shown by
Image Assistant.

23
 3. After you complete the first run experience for the application and verify that it
functions as expected, choose Continue.

Configure the image

1. On the Configure Image tab, type the following information.

Option Value

Name The unique name identifier for the image, such as

SAPGUI-Demo-Image, using any of the following
characters: a-Z,0–9,-,_,.
Note: The name cannot begin with "Amazon," "AWS," or
"AppStream.”

Display Name A user-friendly name to display in the console, such as

SAP GUI Demo Image

Description An optional description for the image: for example, Image

containing the SAP GUI desktop application. Created on
DD-MM-YYYY.

Always use latest agent Leave this check box selected so that streaming instances
version that are launched from your image always include the
latest AppStream 2.0 features, performance improvements,
and security updates. For more information, see Amazon
AppStream 2.0 Agent Version History.

2. On the Configure Image tab, the image details should display as follows. Choose
Next.

3. Review the image details and choose Disconnect and Create Image.

4. The remote session disconnects within a few moments. When the Lost
Connectivity message appears, close the browser tab.

24
 Figure 12: The Lost connectivity message indicating that the image creation process has started.

5. Return to the Amazon AppStream 2.0 console and choose Images, Image
Registry. While your image is being created, the image status in the image
registry of the console appears as Pending. While your image is being created,
you cannot connect to it.

6. Click the Refresh icon periodically to update the status. Image creation takes
about 20 minutes. After your image is created, the image status changes to
Available and the image builder is automatically stopped.

Note: To make changes to your image, such as adding other applications or

updating existing applications, you must create a new image. To do so, restart and
reconnect to the image builder, make your changes, and then repeat the Image
Assistant process to create a new image that includes the changes.

Step 7: Provision a fleet

An AppStream 2.0 fleet defines the hardware, network, Active Directory (if applicable),
and scaling configuration for your application streaming infrastructure. For more
information, see Amazon AppStream 2.0 Stacks and Fleets.

In this section, you’ll do the following:

• Provide details for your fleet.

• Choose an image.

• Configure the fleet.

25
 • Configure the network.

Provide fleet details

1. Open the AppStream 2.0 console at https://console.aws.amazon.com/appstream2.

2. In the navigation pane, choose Fleets, Create Fleet.

3. For Step 1: Provide Fleet Details, type the following text and choose Next.

Option Value

Name The unique name identifier for the fleet, such as

DemoCo_Fleet_v1_mmddyyyy, using any of the following
characters: a-Z,0–9,-,_,.
Note: The name cannot begin with "Amazon," "AWS," or
"AppStream."

Display Name The name displayed in the console, such as DemoCo

Fleet v1 April 2018.

Description An optional description for the fleet.

Choose an image
For Step 2: Choose an image, choose the image that you created, scroll to the bottom
of the page, and then choose Next.

Configure the fleet

1. For Step 3: Configure fleet, in Choose instance type, you define the hardware
configuration for each of the instances that make up your fleet. Because you
created the image by using the General Purpose family, the instance type is
already populated. However, you can select any of the three instance type options
that are presented.

26
 Figure 13: The Choose instance type section of the Configure fleet page.

2. For this exercise, leave the General Purpose instance type selected, and then
choose stream.standard.medium. For more information, see Amazon AppStream
2.0 Instance Families.

3. Under Fleet Type details, choose a fleet type that suits your needs. The fleet type
determines the availability of streaming instances and affects your costs. You can
choose either of the following:

• Always-on: Instances run all the time, even when no users are streaming
applications. When this option is selected, instances are immediately available
for the next user to connect to immediately.

• On-Demand: Instances run only when users are streaming applications. Idle
instances that are available for streaming are in a stopped state. When this
option is selected, a user must wait for one to two minutes for an instance to
start up.

For this exercise, select the On-Demand option.

4. Under User session details, define the maximum amount of time that users can
be connected to streaming sessions and how long streaming sessions should
remain active after users disconnect.

• Maximum session duration defines how long user streaming sessions

can remain active. If users are still connected to a streaming session five
minutes before this limit is reached, they are prompted to save any open
documents before being disconnected. Choose 8 hours.

• Disconnect timeout defines how long user streaming sessions can

remain active after users are disconnected. If users try to reconnect to the

27
 streaming session after a disconnection or network interruption within this
time interval, they are connected to the previous session. After the
disconnect timeout expires, the session is terminated, and the user must
start a new session to reconnect. Leave the default setting of 15 minutes.

5. Under Fleet capacity, set Minimum capacity to 2 and Maximum Capacity to 4.

Notes:

• Capacity is defined in terms of the number of instances within a fleet and,

consequently, every unique user streaming session that is served by a
separate instance.

• The minimum capacity for your fleet is the minimum number of users who
are expected to be streaming at the same time.

• The maximum capacity for your fleet is the maximum number of users
who are expected to be streaming at the same time.

6. Choose Next.

Configure the network

1. For Step 4: Configure Network, make sure that the Default Internet Access
check box is not selected. This option does not need to be selected because you
already configured a VPC with a NAT gateway to provide internet access.

2. For VPC, select vpc-xxxxxxxx (AppStream2 VPC).

3. For Subnet 1, choose subnet-xxxxxxxx | (10.0.1.0/24). This is the AppStream2

Private Subnet1.

4. For Subnet 2, choose subnet-xxxxxxxx | (10.0.2.0/24). This is the AppStream2

Private Subnet2.

5. Choose Next.

6. Confirm the fleet configuration details. To change settings for any section, choose
Edit, and make the needed changes. After you finish reviewing the configuration
details, choose Create.

28
 7. In the pricing acknowledgement dialog box, select the acknowledgement check
box, and choose Create to begin provisioning your fleet with the initial set of
running instances.

Figure 14: The AppStream 2.0 streaming instance pricing acknowledgement dialog box.

Note: If an error message notifies you that you don’t have sufficient limits to create
the fleet, submit a limit increase request to the AWS Support Center. For more
information, see Amazon AppStream 2.0 Service Limits.

Fleet provisioning usually takes 10 minutes to finish. While your fleet is being
created and fleet instances are provisioned, the status of your fleet displays as
Starting in the Fleets list. Choose the Refresh icon periodically to update the fleet
status until the status is Running.

8. After the status changes to Running, the fleet is available and you can use it to
create a stack.

Step 8: Create an AppStream 2.0 stack and a streaming

URL
An AppStream 2.0 stack consists of a fleet, user access policies, and storage
configurations. You create a stack to start streaming applications to users.

In this section, you’ll do the following:

• Provide details for your stack and associate your stack with a fleet.

• Enable persistent storage for the stack.

29
 • Create a streaming URL.

Provide stack details and associate the stack with a fleet

1. Open the AppStream 2.0 console at https://console.aws.amazon.com/appstream2.

2. In the navigation pane, choose Stacks, Create Stack.

3. For Step1: Stack Details, type the following information and choose Next.

Option Value

Name The unique name identifier for the stack, such as

DemoCo_Stack_mmddyyyy, using any of the following
characters: a-Z,0–9,-,_.

Note: The name cannot begin with "Amazon," "AWS," or

"AppStream."

Display Name The name displayed in the console, such as DemoCo

Stack April 2018.

Description An optional text box where you can enter details of the
stack: for example Stack v1 created by (your initials or
name) on mm/dd/20yy.

Redirect URL An optional URL to which users are redirected at the end
of their streaming session.
Type: https://aws.amazon.com

Fleet Select the DemoCo_Fleet_v1_mmddyyy fleet that you

created.

Enable persistent storage for the stack

1. For Step 2: Enable Storage, make sure that the Enable Home Folders option is
selected. When this option is selected for an AppStream 2.0 stack, users of the
stack are presented with a persistent storage folder in their AppStream 2.0
sessions. Data stored by users in their Home Folders is backed up to an Amazon

30
 S3 bucket that is automatically created in your AWS account. For more
information, see Persistent Storage with AppStream 2.0 Home Folders.

Figure 15: The Enable Home Folders page, displaying the Amazon S3 bucket that is automatically created.

2. Choose Review.

3. Confirm the stack configuration details. To change the settings for any section,
choose Edit and make the needed changes. After you finish reviewing the
configuration details, choose Create.

After a few moments, the Stacks list reappears. Your stack is listed with a status of
Active.

Create a streaming URL

To quickly test application streaming without setting up users, create a temporary URL
that can be pasted into a new browser window.

1. In the navigation pane, choose Stacks.

2. For Stacks, select the stack that you just created.

3. Choose Actions, Create streaming URL.

Figure 16: The Create streaming URL menu item.

31
4. In the Create streaming URL dialog box, type the following information and
choose Get URL.

Option Value

User id An ID for the user of the streaming URL. For this exercise,
type DemoCoTestUser1.

Note: This entry is not tied to Active Directory or an LDAP

type of directory service. It is simply an identifier for
creating a unique URL.

Session Expiration The length of time that this URL is available to use. For
this exercise, choose 1 hour.

5. The Create streaming URL dialog box refreshes, displaying the user ID that you
entered and the URL that AppStream 2.0 generated for the user.

6. Choose Copy Link to copy the full URL to the clipboard.

Figure 17: The Create streaming URL dialog box.

7. The Create streaming URL dialog box refreshes again, confirming that the link
was successfully copied to the clipboard. Close the Create Streaming URL dialog
box.

Notes:

• Providing access to an AppStream 2.0 streaming session through a

console-generated link as described in this procedure is for testing only.
• In a production environment, several authentication and authorization
options are available to provide your users with access to AppStream 2.0.
These options include federation through SAML 2.0, the AppStream 2.0

32
 user pool (a built-in identity management feature), and custom identity
solutions. For more information, see Setting up SAML and Manage
Access with the AppStream 2.0 User Pool.

8. In a browser, open a new tab, paste the streaming URL into the address bar, and
press Enter. AppStream 2.0 displays an application catalog page that lists the
applications that you have configured for streaming.

9. Choose the SAP GUI icon to stream the application, and confirm that it functions
as expected.

10. After you confirm that SAP GUI functions as expected when streaming, close the
browser tab that you opened to test the AppStream 2.0 environment.

Step 9: Manage user access with an AppStream 2.0 user

pool
An AppStream 2.0 user pool is a built-in identity management feature that you can use
to enable users to access their streamed applications. Alternatively, you can use SAML
2.0 to federate through Microsoft Active Directory or any other custom identity solution
provider that supports SAML 2.0.

Note: This guide describes how to manage user access to AppStream 2.0 with the user
pool. For information about configuring third-party SAML 2.0 identity provider solutions
to work with AppStream 2.0, see AppStream 2.0 Integration with SAML 2.0.

To enable users in the user pool to open applications after they sign in to the
AppStream 2.0 user portal, you must assign each user to at least one stack that
contains applications. After you assign the user to a stack, AppStream 2.0 sends an
optional notification email to the user with instructions about how to access the stack
and a URL. The user can access the stack by using the URL until you delete the stack
or unassign the user from the stack.

In this section, you’ll configure an AppStream 2.0 user pool and grant a user access to
AppStream 2.0 by doing the following:

• Create a user in the user pool. AppStream 2.0 then sends a welcome email with
instructions and a temporary password.

33
 • Assign the stack that you created to the user.

Create a user
1. Open the AppStream 2.0 console at https://console.aws.amazon.com/appstream2.

2. In the navigation pane, choose User Pool, Create User.

3. In the Create User dialog box, type the following information and choose Create
User.

Option Value

Email An active email address that you can access.

First Name The first name of the user.

Last Name The last name of the user.

4. After a few moments, the User Pool list refreshes, and the user is listed and
enabled.

Figure 18: The User Pool dashboard showing the newly created user.

Assign a stack to the user

1. In the navigation pane, choose User Pool, and select the user that you created.

2. Choose Actions, Assign Stack.

34
 3. In the Assign Stack dialog box, for Stack, select the DemoCo_Stack_mmddyyyy
stack that you created earlier.

4. Leave the Send email notification to user option selected.

5. Choose Assign Stack.

6. After a few moments, the User Pool list refreshes. The user that you created
appears under User Details with DemoCo_Stack_mmddyyyy as an assigned
stack.

Figure 19: The User Pool dashboard showing the newly created user with a stack now assigned.

Step 10: Test the end user authentication and application

streaming experience
In the previous section, you added a user to the user pool by providing a name and an
email address and then assigned a stack to the user. AppStream 2.0 sent an email to
the email address after each action. To test the end user experience, sign in to
AppStream 2.0 as the user that you created and start a streaming session.

35
1. Open the first notification email that you received, and open the Login page link.
The AppStream 2.0 portal sign-in page opens in your browser.

Figure 20: The AppStream 2.0 user login prompt.

2. Type the email address used for the user that you created and the temporary
password that was provided in the email, and then choose Log in.

3. When prompted, type a new password, confirm it, and then choose Set Password.
The AppStream 2.0 application catalog page opens, displaying the applications
that are available for streaming.

4. Choose an application to begin streaming.

36
Figure 21: AppStream 2.0 End user experience

Step 11: Take the next step with AppStream 2.0

Congratulations, you have now successfully created an AppStream 2.0 environment to
stream SAP GUI desktop application. Below is an architectural diagram illustrating the
AppStream 2.0 environment you created:

37
 Figure 22: Your AppStream 2.0 environment.

This guide provided an introduction to AppStream 2.0 by walking you through basic
configuration and deployment exercises. To increase your understanding of AppStream
2.0 and take advantage of more features, consider doing the following:

1. Try using different instance types and sizes to match your application’s
requirements. For example, use the Graphics Design instance type to run
applications that rely on hardware graphics acceleration. For information about the
different instance types and sizes available for AppStream 2.0, and their pricing,
see Amazon AppStream 2.0 Pricing.

2. Enable single sign-on (SSO) access to your streamed applications through SAML
2.0. When you do this, your users can use their existing credentials to sign into
AppStream 2.0 streaming sessions through your own web portal. For more
information, see Single Sign-on Access to AppStream 2.0 Using SAML 2.0.

3. Join your AppStream 2.0 fleets and image builders to domains in Microsoft Active
Directory. Your users can then benefit from access to Active Directory network
resources such as printers and file shares from within their streaming sessions.
You can also apply Group Policy settings to your streaming instances and users to

38
 meet the needs of your organization. For more information, see Using Active
Directory with AppStream 2.0.

4. Configure your fleet scaling policies to increase or decrease the number of

instances available to users in response to changes in user demand or according
to time of day. For more information, see Fleet Auto Scaling for Amazon
AppStream 2.0.

Important: Remember to delete the resources that you created in these exercises to
avoid further charges to your account. For information about how to delete AppStream
2.0 resources, see Appendix E. For more information about AppStream 2.0 pricing, see
Amazon AppStream 2.0 Pricing.

39
Appendix A: Create and activate an AWS account
If you do not already have an AWS account, complete the following steps to create and
activate one. During this process, you do the following:

• Create your AWS account.

• Add a payment method.

• Verify your phone number.

• Select an AWS Support plan.

• Watch for three account confirmation emails.

Create your AWS account

1. In a browser window, open the Amazon Web Services webpage.

2. Choose Create an AWS Account. If you've signed in to AWS recently, you

might see Sign In to the Console instead. If Create a new AWS account isn't
visible, choose Sign in to a different account, Create a new AWS account.

3. On the Create an AWS Account page, type a valid email address, a password
and password confirmation, and an AWS account name.

4. You must note the account name, email address, and password that you choose
for your AWS account because you need these credentials to sign in to AWS.

5. Choose Continue.

6. On the Contact Information page, the option to choose a company account or

personal account is available. These two account types function identically. For
the exercises in this guide, choose Personal Account, and then enter the
requested contact information.

7. Review the AWS Customer Agreement, and select the corresponding check
box.

8. Choose Create Account and Continue.

40
 Note: After you receive an email to confirm that your account is created, you can
sign in to your new account by using the email address and password that you
provided. However, you must continue with the activation process before you can
use AWS services.

Add a payment method

On the Payment Information page, type the requested information associated with
your payment method. If the address for your payment method is the same as the
address you provided for your account, choose Secure Submit.

Otherwise, choose Use a new address, type the billing address for your payment
method, and then choose Secure Submit.

Verify your phone number

1. On the Phone Verification page, type a phone number that you can use to
accept incoming calls.

2. Type the code displayed in the captcha.

3. When you’re ready to receive the call, choose Call me Now. In a few moments,
you’ll receive an automated call from AWS that prompts you to enter your PIN to
validate the AWS account.

4. When you receive the call, enter the provided PIN on your phone’s keypad.

5. After the process is complete, choose Continue.

Choose an AWS Support plan

On the Select a Support Plan page, choose Basic. For information about AWS
Support, see AWS Support Features.

After you choose a Support plan, a confirmation page indicates that your AWS account
is being activated. Accounts are usually activated within a few minutes, but the process
may take up to 24 hours. If you attempt to sign in to the AWS Management Console
before your account is active, the following message appears:

41
 Figure 23: Message that appears if you sign in before your account activation is complete.

Watch for three AWS account confirmation emails

When you sign up for your account, you receive three account confirmation emails:

• The first email, with a subject line of “Welcome to Amazon Web Services,”
confirms the creation of your AWS account and is sent almost immediately after
you verify your phone number.

• The second email, with a subject line of “AWS Support (Basic) Sign-Up
Confirmation,” confirms the AWS Support option that you selected during the
account creation process.

• The third email, with a subject line of “Your AWS Account is Ready - Get Started
Now,” is sent after your AWS account ID is ready to use. After you receive this
email, you can access AWS services by using the AWS Management Console.

42
Appendix B. Manually create and configure network
resources
Step 2 of this guide described how to use a CloudFormation template to automatically
create and configure the necessary network resources for your AppStream 2.0
environment. To manually create and configure network resources, follow the steps in
this appendix. At the end of this appendix, the topology of your “DemoCo” VPC should
look similar to the following diagram:

Figure 24: DemoCo VPC architecture.

Note: The CIDR block assignments for the private subnets might be reversed
depending on the availability zones used by the VPC wizard.

43
AppStream VPC requirements
At a minimum, AppStream 2.0 requires a VPC that includes one public subnet and two
private subnets. A public subnet has direct access to the internet through an internet
gateway. A private subnet requires a Network Address Translation (NAT) gateway or
NAT instance to access the internet.

Allocate an Elastic IP address

Before you create your VPC, you must allocate an Elastic IP address in your
AppStream 2.0 region. An Elastic IP address enables your streaming instances to be
accessible through an internet gateway.

1. Open the Amazon EC2 console at https://console.aws.amazon.com/ec2.

2. In the navigation pane, under Network & Security, choose Elastic IPs.

3. Choose Allocate New Address and then choose Allocate.

4. Note the Elastic IP address and then choose Close.

Figure 25: An allocated Elastic IP address.

Create a VPC by using the VPC Wizard

The easiest way to start building your VPC environment is to use the VPC Wizard. The
wizard guides you through the process of creating a public subnet, private subnet, NAT
gateway, and internet gateway, with the correct route table configurations.

1. Open the Amazon VPC console at https://console.aws.amazon.com/vpc/.

2. In the navigation pane, choose VPC Dashboard, Start VPC Wizard.

44
3. In Step 1: Select a VP Configuration, choose VPC with Public and Private
Subnets, Select.

Figure 26: Creating a VPC with the VPC Wizard.

4. In Step 2: VPC with Public and Private Subnets, type the following information
and then choose Create VPC.

Option Value

IPv4 CIDR block 10.0.0.0/20

IPv6 CIDR block Accept the default value: No IPv6 CIDR Block

VPC Name AppStream2 VPC

Public subnet’s IPv4 CIDR Accept the default value: 10.0.0.0/24

Availability Zone Accept the default value: No Preference

Public subnet name AppStream2 Public Subnet

Private subnet’s IPv4 CIDR Accept the default value: 10.0.1.0/24

Availability Zone Accept the default value: No Preference

Private subnet name AppStream2 Private Subnet1

45
 Option Value

Elastic IP Allocation ID Click in the text box and select the value that corresponds
to the Elastic IP address you created. This address is
assigned to the NAT gateway.

Service endpoints Choose Add Endpoint.

Service Select the entry in the list that ends with “s3” (the
com.amazonaws.xx-rrrr-x.s3 service that
corresponds to the region in which the VPC is being
created). Note: This is not the default value.

Subnet Select Private subnet.

Policy Accept the default value: Full Access

Enable DNS hostnames Accept the default value: Yes

Hardware tenancy Accept the default value: Default

Note: The VPC names and subnet names are for identification purposes only.
You can use different names.

5. After a few minutes, when a message in the VPC dashboard notifies you that the
VPC is created, choose OK.

Add a second private subnet

1. In the navigation pane, choose Subnets.

2. Select the subnet with the name AppStream2 Private Subnet1. On the Summary
tab, below the list of subnets, make a note of the Availability Zone for this subnet.

46
 Figure 27: Identifying the Availability Zone for AppStream2 Private Subnet1.

3. At the top of the same page, choose Create Subnet. Enter the following
information in the Create Subnet dialog box and then choose Yes, Create.

Option Value

Name tag AppStream2 Private Subnet2

VPC Select the VPC with the name AppStream2 VPC.

Availability Zone Select an Availability Zone other than the one you are
using for AppStream2 Private Subnet1. Selecting a
different Availability Zone increases fault tolerance.

IPv4 CIDR block 10.0.2.0/24

(This is a subset of the CIDR block for your VPC.)

Modify the subnet route tables

1. In the navigation pane, choose Subnets, and then select the subnet with the name
AppStream2 Public Subnet.

2. On the Route Table tab, note the ID of the route table (similar to rtb-XXXXXXXX).

3. In the navigation pane, choose Route Tables and select the route table with the ID
that you noted in the previous step.

47
4. For Name, open the empty field, type AppStream2 Public Route Table, and then
select the check mark to save your changes.

Figure 28: Opening the name field for the route table that serves the AppStream2 Public Subnet.

5. Make sure that AppStream2 Public Route Table is still selected. On the Routes
tab, verify that the route table includes the following two routes:

Destination Target

10.0.0.0/20 local

0.0.0.0/0 igw-XXXXXXXX

These two routes function as follows for all resources within a subnet that is
associated with the route table:

• Local: All traffic from the resources destined for IPv4 addresses within the
10.0.0.0/20 CIDR block is routed locally within the VPC.

• Outbound: Traffic destined for all other IPv4 addresses is routed to the internet
gateway (identified by igw-XXXXXXXX) that was created by the VPC Wizard.

To modify the route table, choose Edit and make the needed changes. For more
information, see Route Tables.

6. In the navigation pane, choose Subnets and select the subnet named
AppStream2 Private Subnet1.

7. On the Route Table tab, note the ID of the route table (similar to rtb-XXXXXXXX).

8. In the navigation pane, choose Route Tables and select the route table with the ID
you noted in the previous step.

9. For Name, open the empty field, type AppStream2 Private Route Table, and then
select the check mark to save your changes.

48
 Figure 29: Opening the name field for the route table that serves the AppStream2 private subnets.

10. Make sure that AppStream2 Private Route Table is still selected, and on the
Routes tab, verify that the route table includes the following routes:

Destination Target

10.0.0.0/20 local

0.0.0.0/0 nat-XXXXXXXXXXXXXXXXX

pl-YYYYYYYY (com.amazonaws.<region>-<#>.s3) vpce-ZZZZZZZZ

These three routes function as follows for all resources within a subnet that is
associated with the route table:

• Local: All traffic from the resources destined for IPv4 addresses within the
10.0.0.0/20 CIDR block is routed locally within the VPC.

• Storage: Traffic destined for S3 buckets is routed to the S3 endpoint (identified

by vpce-ZZZZZZZZ).

• Outbound: Traffic destined for all other IPv4 addresses is routed to the NAT
gateway (identified by nat-XXXXXXXX).

To modify the route table, choose Edit and make the needed changes. For more
information, see Route Tables.

11. In the navigation pane, choose Subnets and select the subnet with the name
AppStream2 Private Subnet2.

12. On the Routes tab, verify that the route table is the one named AppStream2
Private Route Table. If the route table is different, choose Edit and select this route
table.

49
Appendix C. Clean up your AppStream 2.0 resources
Although you can continue to use this AppStream 2.0 environment, keep in mind that
you pay for your running resources. For more information, see Amazon AppStream 2.0
Pricing.

Cleaning up the resources that you created frees up resources and helps you avoid
unintended charges to your account.

Stop and delete your image builder

1. Open the AppStream 2.0 console at https://console.aws.amazon.com/appstream2.

2. In the navigation pane, choose Images, Image Builder.

3. Confirm whether the image builder that you created in Step 3 in this guide is in a
stopped state. If not, select the image builder and choose Actions, Stop. If you
created multiple image builders, repeat this step for each image builder that you
created.

4. After the image builder has stopped, choose Actions, Delete. Repeat this step for
each image builder that you created.

Revoke stack permissions for users in the user pool

1. In the navigation pane, choose User Pool.

2. Select the user you created in Step 9 in this guide and choose Actions, Unassign
stack. This action revokes the stack permissions for the user.

Disassociate your fleets from your stack and delete your stack
1. In the navigation pane, choose Stacks.

2. Select the stack you created and choose Actions, Dissociate Fleet. This action
dissociates the fleet from the stack.

3. To delete the stack, choose Actions, Delete.

Stop and delete your fleet

1. In the navigation pane, choose Fleets.

50
 2. Confirm whether the fleet that you created in Step 6 in this guide is in a stopped
state. If not, select the fleet and choose Actions, Stop.

3. After the fleet has stopped, choose Actions, Delete.

Appendix F. Additional resources

For more information about AppStream 2.0, visit the following resources:

• Amazon AppStream 2.0 Product Details

• Amazon AppStream 2.0 Pricing Details

• Amazon AppStream 2.0 FAQs

• Amazon AppStream 2.0 Developer Guide

• Amazon AppStream 2.0 API Reference

• Amazon AppStream 2.0 CLI Reference

• Amazon AppStream 2.0 Try It Now Demo

• Amazon AppStream 2.0 Resources

51