0% found this document useful (0 votes)
171 views7 pages

1.C GS 4210 24P2Sv2 - S PDF

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
171 views7 pages

1.C GS 4210 24P2Sv2 - S PDF

Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

GS-4210-24P2S

24-Port 10/100/1000T 802.3at PoE + 2-Port


100/1000X SFP Managed Switch

Physical Port
• 24-port 10/100/1000BASE-T Gigabit RJ45 copper
• 2 100/1000BASE-X mini-GBIC/SFP slots
• RJ45 console interface for switch basic management and setup
• Reset button for system factory default and reboot
Switching
• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps
full duplex mode, flow control and auto-negotiation, and auto
MDI/MDI-X
• Features Store-and-Forward mode with wire-speed filtering and
Cost-optimized Managed PoE+ Switch with Advanced L2/L4 Switching and forwarding rates
Security • IEEE 802.3x flow control for full duplex operation and back
PLANET GS-4210-24P2S is an ideal Gigabit PoE Switch which provides cost-effective pressure for half duplex operation
advantage to local area network and is widely accepted in the SMB office network. It • 9K jumbo frame

offers intelligent Layer 2 data packet switching and management functions, friendly web • Automatic address learning and address aging
• Supports CSMA/CD protocol
user interface and stable operation. The model complies with IEEE 802.3at Power over
Power over Ethernet
Ethernet Plus (PoE+) at an affordable price. The GS-4210-24P2S is equipped with 24
• Complies with IEEE 802.3at High Power over Ethernet
10/100/1000BASE-T Gigabit Ethernet ports and 2 100/1000BASE-X SFP interfaces with
• Complies with IEEE 802.3af Power over Ethernet
inner power system. Its 24 Gigabit Ethernet ports integrated with 802.3at PoE+ injector
• Up to 24 ports of IEEE 802.3af/802.3at devices powered
function on all ports. It offers a rack-mountable, affordable, safe and reliable power • Supports PoE Power up to 30.8 watts for each PoE port
solution for SMBs deploying Power over Ethernet networks, or requiring enhanced data • 300-watt PoE budget
security and network traffic management. • Auto detects powered device (PD)
• Circuit protection prevents power interference between ports
• Remote power feeding up to 100 meters in standard mode and
Power LED 100/1000X SFP LNK/ACT Status RJ45 Console Port 250m in extend mode
• PoE Management
–– Total PoE power budget control
–– Per port PoE function enable/disable
–– PoE Port Power feeding priority
–– Per PoE port power limitation
–– PoE delay
–– PD classification detection
• Intelligent PoE features
PoE & Speed, LNK/ACT Status Reset Button 24 x Gigabit 802.3at PoE Ports 2 x 100/1000X SFP Slots
–– PoE usage threshold control
–– PD alive check
–– PoE schedule
Built-in Unique PoE Functions for Powered Devices Management Layer 2 Features
As the PoE managed switch for surveillance, wireless and VoIP networks, the GS-4210- • Prevents packet loss with back pressure (half-duplex) and IEEE
24P2S features special PoE management functions: 802.3x pause frame flow control (full-duplex)
• High performance Store and Forward architecture, runt/CRC
■ PD alive check
filtering eliminates erroneous packets to optimize the network
■ Scheduled power recycling
bandwidth
■ PoE schedule • Supports VLAN
■ PoE usage monitoring –– IEEE 802.1Q tagged VLAN
–– Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

1
GS-4210-24P2S

Intelligent Powered Device Alive Check


The GS-4210-24P2S can be configured to monitor connected PD (powered device) –– Protocol VLAN

status in real time via ping action. Once the PD stops working and responding, the GS- –– Voice VLAN
–– Private VLAN
4210-24P2S will resume the PoE port power and bring the PD back to work. It will
–– Management VLAN
greatly enhance the network reliability through the PoE port resetting the PD’s power
–– GVRP
source and reducing administrator management burden. • Supports Spanning Tree Protocol
–– STP (Spanning Tree Protocol)
Step 1 Step 2 –– RSTP (Rapid Spanning Tree Protocol)
–– MSTP (Multiple Spanning Tree Protocol)
PT PoE Camera No Response......
PD Status
Good!! –– STP BPDU Guard, BPDU Filtering and BPDU Forwarding
Ping Request • Supports Link Aggregation
Ping Request –– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Ping Echo Check alive status for 3 times –– 1 LACP group, up to 2 ports per LACP group
–– Cisco ether-channel (static trunk)
Step 3 Step 4
–– 1 trunk group, up to 2 ports per trunk group
Alarm Notification
PoE PD Alive!! • Provides port mirror (many-to-1)
PoE
• Loop protection to avoid broadcast loops
ON OFF
ON ON Quality of Service
Restart PoE device if without response • Ingress/Egress Rate Limit per port bandwidth control
• Storm Control support
–– Broadcast/unknown unicast/unknown multicast
Scheduled Power Recycling • Traffic classification
The GS-4210-24P2S allows each of the connected PoE IP cameras or PoE wireless –– IEEE 802.1p CoS
access points to reboot at a specific time each week. Therefore, it will reduce the chance –– TOS/DSCP/IP precedence of IPv4/IPv6 packets
of IP camera or AP crash resulting from buffer overflow. • Strict priority and Weighted Round Robin (WRR) CoS policies
Multicast
• Supports IPv4 IGMP snooping v2 and v3
Automatically Reboot • Supports IPv6 MLD snooping v1, v2
S M T W T F S Every Friday 23:00 • IGMP querier mode support
CPU/Buffer • IGMP snooping port filtering
Load 85%
• MLD snooping port filtering
Security
PoE CPU/Buffer
Load 10% • Authentication
–– IEEE 802.1X port-based network access authentication
ON OFF ON PoE PT Camera –– Built-in RADIUS client to co-operate with the RADIUS
servers
–– DHCP Option 82
PoE Schedule for Energy Saving
–– RADIUS/TACACS+ login user access authentication
Under the trend of energy saving worldwide and contributing to environmental protection,
• Access Control List
the GS-4210-24P2S can effectively control the power supply besides its capability of
–– IPv4/IPv6 IP-based ACL
giving high watts power. The “PoE schedule” function helps you to enable or disable –– IPv4/IPv6 IP-based ACE
PoE power feeding for each PoE port during specified time intervals and it is a powerful –– MAC-based ACL
function to help SMBs or enterprises save power and money. It also increases security –– MAC-based ACE

by powering off PDs that should not be in use during non-business hours. • MAC Security
–– Static MAC
–– MAC Filtering
• Port security for source MAC address entries filtering
8AM 5PM 5PM 8AM • DHCP snooping to filter distrusted DHCP messages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
PoE PoE PoE PoE

PoE PoE PoE PoE

• IP source guard prevents IP spoofing attacks


• DoS attack prevention
Power Power Power Power
Power Power Power Power Off Off Off On • SSH/SSL
On On On On
6 Watts 6 Watts 12 Watts 12 Watts
6 Watts 6 Watts 12 Watts 12 Watts
Save 24 watts/hr during off-business hours
Management
Total consumption of 36 watts/hr
Total Saved = 10800 Watts/month
• IPv4 and IPv6 dual stack management
PoE 1000BASE-T UTP with PoE

2
GS-4210-24P2S

PoE Usage Monitoring


Via the power usage chart in the web management interface, the GS-4210-24P2S • Switch management interface
–– Web switch management
enables the administrator to monitor the status of the power usage of the connected PDs
–– Telnet command line interface
in real time. Thus, it greatly enhances the management efficiency of the facilities.
–– SNMP v1, v2c and v3
–– SSH and SSL secure access
IPv6/IPv4 Dual Stack • User privilege levels control
Supporting both IPv6 and IPv4 protocols, the GS-4210-24P2S helps the SMBs to step in • Built-in Trivial File Transfer Protocol (TFTP) client
the IPv6 era with the lowest investment as its network facilities need not be replaced or • BOOTP and DHCP for IP address assignment
• System maintenance
overhauled if the IPv6 FTTx edge network is set up.
–– Firmware upload/download via HTTP/TFTP
–– Configuration upload/download through web interface
Robust Layer 2 Features –– Dual images
The GS-4210-24P2S can be programmed for advanced switch management functions –– Hardware reset button for system reboot or reset to factory
such as dynamic port link aggregation, 802.1Q VLAN and Q-in-Q VLAN, Multiple default
Spanning Tree protocol (MSTP), loop and BPDU guard, IGMP snooping, and MLD • SNTP Network Time Protocol
• Cable diagnostics
snooping. Via the link aggregation, the GS-4210-24P2S allows the operation of a high-
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
speed trunk to combine with multiple ports such as a 4Gbps fat pipe, and supports fail-
• SNMP trap for interface link up and link down notification
over as well. Also, the Link Layer Discovery Protocol (LLDP) is the Layer 2 protocol
• Event message logging to remote Syslog server
included to help discover basic information about neighboring devices on the local • Four RMON groups (history, statistics, alarms and events)
broadcast domain. • PLANET smart discovery utility

Efficient Traffic Control


The GS-4210-24P2S is loaded with robust QoS features and powerful traffic management to enhance services to business-class data, voice, and video
solutions. The functionality includes broadcast/multicast/unicast storm control, per port bandwidth control, 802.1p/CoS/IP DSCP QoS priority and remarking.
It guarantees the best performance at VoIP and video stream transmission, and empowers the enterprises to take full advantages of the limited network
resources.

Enhanced and Secure Management


For efficient management, the GS-4210-24P2S is equipped with console, web, telnet and SNMP management interfaces. With the built-in web-based
management interface, the GS-4210-24P2S offers an easy-to-use, platform-independent management and configuration facility. By supporting standard
Simple Network Management Protocol (SNMP), the switch can be managed via any standard management software. For text-based management, the
switch can be accessed via telnet and the console port. Moreover, the GS-4210-24P2S offers secure remote management by supporting SSH, HTTPS and
SNMPv3 connections which encrypt the packet content at each session.

Powerful Security
PLANET GS-4210-24P2S offers comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. It can be used to
restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. Its protection
mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and
block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy. Furthermore, Port
security function allows to limit the number of network devices on a given port.

Advanced Network Security


The GS-4210-24P2S also provides DHCP snooping, IP source guard and dynamic ARP inspection functions to prevent IP snooping from attack and discard
ARP packets with invalid MAC address. The network administrators can now construct highly-secure corporate networks with considerably less time and
effort than before.

Flexible Extension Solution


The two mini-GBIC slots built in the GS-4210-24P2S are compatible with the 100BASE-FX/1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber
transceiver to uplink to backbone switch and monitor center in long distance. The distance can be extended from 550 meters to 2km (multi-mode fiber)
and to 10/20/30/40/50/60/70/120 kilometers (single-mode fiber or WDM fiber). They are well suited for applications within the enterprise data centers and
distributions.

3
GS-4210-24P2S

Applications
Perfectly-Integrated Solution for PoE IP Surveillance
The GS-4210-24P2S brings an ideal, secure surveillance system at a lower total cost. The GS-4210-24P2S provides 24 10/100/1000Mbps 802.3at PoE+
ports able to feed sufficient PoE power for 24 IEEE 802.3af/IEEE 802.3at PoE IP cameras at the same time. It is also able to connect with one 16-channel
NVR or two 8-channel NVR systems, uplink to the backbone switch and the monitoring center. With such a high-performance switch architecture, the
recorded video files from the PoE IP cameras can be saved in the NVR system to enable the administrators to control and monitor the surveillance images
both in the local LAN and the remote sites.

802.3at PoE IP Camera Non-PoE Camera

PoE Splitter IP Camera


PoE IP Camera DC

PoE

PoE IP Camera PoE


DC
PoE PoE

PoE Splitter IP Camera

GS-4210-24P2S PoE IP Camera


PoE

PoE

PoE IP Camera
PC NVR

Center of Surveillance 802.3af PoE IP Camera


Campus
1000BASE-T UTP
PoE 1000BASE-T UTP with PoE
DC Power Line (DC)

Department/Workgroup PoE Network


Providing 24 PoE in-line power interfaces, the GS-4210-24P2S can easily build a power that centrally controls IP phone system, IP camera system and
wireless AP group for enterprises. The GS-4210-24P2S delivers full ports of 802.3af/at compliant Gigabit Ethernet network connectivity with high-performance
and cost-effective advantages for the increasing number of PoE IP telephones, PoE IP cameras, PoE wireless access points and other devices applied at
the edge of the small or medium enterprise network. The GS-4210-24P2S improves the network efficiency and protects the network clients with the powerful
features:
• Layer 2 to Layer 4 security

• QoS/802.1Q VLAN/static trunk/LACP

• 802.1x port-based and MAC-based network access authentication security

• Multicast IGMP snooping

QoS
GS-4210-24P2S

802.1Q VLAN
1000

PoE

GS-4210-24P2S
1000

PoE VoIP PC PC
PoE

PC PC

PoE IP Camera PoE Wireless AP

Port Trunk
GS-4210-24P2S

Backbone
PC PC PC PC
Web Management Switch
Management Client

PoE 1000BASE-T UTP with PoE


1000BASE-T UTP
1000 1000BASE-SX/LX Fiber-optic

4
GS-4210-24P2S

Specifications
Product GS-4210-24P2S
Hardware Specifications
Hardware Version 2
Copper Ports 24 x 10/100/1000BASE-T RJ45 Auto-MDI/MDI-X Ports
PoE Injector Port 24 802.3af/802.3at PoE Injector Ports
SFP/mini-GBIC Slots 2 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode
Console 1 x RS-232-to-RJ45 serial port (115200, 8, N, 1)
Switch Architecture Store-and-Forward
Switch Fabric 52Gbps/non-blocking
Switch Throughput@64 bytes 38.6Mpps @64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1 megabits
IEEE 802.3x pause frame for full-duplex
Flow Control
Back pressure for half-duplex
Jumbo Frame 9216 bytes
< 5 sec: System reboot
Reset Button
> 5 sec: Factory default
System:
Power (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 24):
LED
1000 LNK/ACT (Green), 10/100 LNK/ACT (Orange), PoE (Orange)
100/1000Mbps SFP Interfaces (Port 25 to Port 26):
1000 LNK/ACT (Green), 100 LNK/ACT (Orange)
Thermal Fan 2
Power Requirements 100~240V AC, 50/60Hz, 4A (max.)
Power Consumption/Dissipation Max. 330 watts/1122 BTU
Dimensions (W x D x H) 445 x 207 x 45 mm (1U height)
Weight 2.8kg
Enclosure Metal
Power over Ethernet
IEEE 802.3af Power over Ethernet/PSE
PoE Standard
IEEE 802.3at Power over Ethernet Plus/PSE

Per Port 52V DC, 300mA. Max. 15.4 watts (IEEE 802.3af)
PoE Power Output
Per Port 52V DC, 600mA. Max. 30 watts (IEEE 802.3at)
PoE Power Budget 300 watts
Number of PDs, 7 watts 24
Number of PDs, 15.4 watts 19
Number of PDs, 30 watts 9
Layer 2 Functions
TX/RX/both
Port Mirroring
Many-to-1 monitor

802.1Q tagged-based VLAN


Up to 256 VLAN groups, out of 4094 VLAN IDs
802.1ad Q-in-Q tunneling
Voice VLAN
VLAN
Protocol VLAN
Private VLAN (Protected port)
GVRP
Management VLAN
Link Aggregation IEEE 802.3ad LACP supports 1 group of 2-port trunk and static trunk supports 1 group of 2-port trunk
IEEE 802.1D Spanning Tree Protocol (STP)
Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)
IGMP (v2/v3) snooping
IGMP Snooping IGMP querier
Up to 256 multicast groups
MLD Snooping IPv6 MLD (v1/v2) snooping, up to 256 multicast groups

IPv4/IPv6 IP-based ACL/MAC-based ACL


Access Control List
Pv4/IPv6 IP-based ACE/MAC-based ACE

8 mapping IDs to 8 level priority queues


- Port number
- 802.1p priority
QoS
- DSCP/IP precedence of IPv4/IPv6 packets
Traffic classification based, strict priority and WRR
Ingress/Egress Rate Limit per port bandwidth control

5
GS-4210-24P2S

IEEE 802.1X port-based authentication


Built-in RADIUS client to cooperate with RADIUS server
RADIUS/TACACS+ authentication
IP-MAC port binding
MAC filtering
Static MAC address
Security DHCP snooping and DHCP Option82
STP BPDU guard, BPDU filtering and BPDU forwarding
DoS attack prevention
ARP inspection
IP source guard
Storm control support
Broadcast/unknown unicast/unknown multicast
Management Functions
RJ45 Console; Web browser; Telnet; SNMP v1, v2c, v3
Firmware upgrade by HTTP/TFTP Protocol through Ethernet network
Configuration upload/download through HTTP/TFTP
Remote/Local Syslog
Basic Management Interfaces
System log
LLDP Protocol
SNTP
PLANET Smart Discovery Utility
Secure Management Interfaces HTTPs, SNMP v3
RFC 3635 Ethernet-like MIB
RFC 2863 Interface Group MIB
SNMP MIBs
RFC 2819 RMON (1, 2, 3, 9)
RFC 1493 Bridge MIB
Standards Conformance
Regulatory Compliance FCC Part 15 Class A, CE

IEEE 802.3 10BASE-T


IEEE 802.3u 100BASE-TX/100BASE-FX
IEEE 802.3z Gigabit SX/LX
IEEE 802.3ab Gigabit 1000T
IEEE 802.3x flow control and back pressure
IEEE 802.3ad port trunk with LACP
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1w Rapid Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree Protocol
IEEE 802.1p Class of Service
IEEE 802.1Q VLAN tagging
IEEE 802.1x Port Authentication Network Control
Standards Compliance IEEE 802.1ab LLDP
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
RFC 768 UDP
RFC 793 TFTP
RFC 791 IP
RFC 792 ICMP
RFC 2068 HTTP
RFC 1112 IGMP version 1
RFC 2236 IGMP version 2
RFC 3376 IGMP version 3
RFC 2710 MLD version 1
RFC 3810 MLD version 2

Environment
Temperature: 0 ~ 50 degrees C
Operating
Relative Humidity: 5 ~ 95% (non-condensing)
Temperature: -10 ~ 70 degrees C
Storage
Relative Humidity: 5 ~ 95% (non-condensing)

6
GS-4210-24P2S

Ordering Information
GS-4210-24P2S 24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch

Related PoE Products


ICA-2250VT Industrial PoE Plus Outdoor IR IP Camera
ICA-3250V Full HD Outdoor IR PoE IP Camera
ICA-4200V Full HD 20M IR Vari-focal Dome IP Camera
ICA-4500V 5 Mega-pixel 20M IR Vari-focal Dome IP Camera
ICA-E3550V 5 Mega-pixel Bullet IR PoE IP Camera
ICA-E5550V 5 Mega-pixel Vandalproof IR PoE IP Camera
ICA-E8550 5 Mega-pixel Outdoor IR PoE Fisheye IP Camera
ICA-HM351 2 Mega-pixel 35M IR Outdoor Box PoE IP Camera
POE-162S IEEE 802.3at Gigabit High Power over Ethernet Splitter
POE-E201 IEEE 802.3at Power over Ethernet Extender
WNAP-C3220A 802.11n Wireless Ceiling-mount PoE Access Point
WNAP-W2201A 802.11n 300Mbps In-Wall Access Point w/USB Charger (EU Type)
WDAP-C7200AC 1200Mbps 802.11ac Dual Band Ceiling-mount Wireless Access Point
WDAP-W7200AC 1200Mbps 802.11ac Dual Band Wall-mount Wireless Access Point
VIP-5060PT Professional HD PoE IP Phone (6-Line)

Available Gigabit SFP Modules for GS-4210-24P2S


MGB-GT SFP-Port 1000BASE-T Module
MGB-SX SFP-Port 1000BASE-SX mini-GBIC module - 220/550m
MGB-LX SFP-Port 1000BASE-LX mini-GBIC module - 10km
MGB-L30 SFP-Port 1000BASE-LX mini-GBIC module - 30km
MGB-L50 SFP-Port 1000BASE-LX mini-GBIC module - 50km
MGB-L70 SFP-Port 1000BASE-LX mini-GBIC module - 70km
MGB-L120 SFP-Port 1000BASE-LX mini-GBIC module - 120km
MGB-LA10 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 10km
MGB-LB10 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 10km
MGB-LA20 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 20km
MGB-LB20 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 20km
MGB-LA40 SFP-Port 1000BASE-LX (WDM,TX:1310nm) mini-GBIC module - 40km
MGB-LB40 SFP-Port 1000BASE-LX (WDM,TX:1550nm) mini-GBIC module - 40km

Available Fast Ethernet SFP Modules for GS-4210-24P2S


MFB-FX SFP-Port 100BASE-FX Transceiver (1310nm) - 2km
MFB-F20 SFP-Port 100BASE-FX Transceiver (1310nm) - 20km
MFB-F40 SFP-Port 100BASE-FX Transceiver (1310nm) - 40km
MFB-F60 SFP-Port 100BASE-FX Transceiver (1310nm) - 60km
MFB-FA20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1310nm) - 20km
MFB-FB20 SFP-Port 100BASE-BX Transceiver (WDM,TX:1550nm) - 20km

PLANET Technology Corporation


11F., No.96, Minquan Rd., Xindian Dist., New Taipei City 231, GS-4210-24P2S
Taiwan (R.O.C.)
PLANET reserves the right to change specifications without prior notice. All brand names and trademarks are property of
Tel: 886-2-2219-9518 Fax: 886-2-2219-9528 their respective owners. Copyright © 2017 PLANET Technology Corp. All rights reserved.
Email: [email protected] www.planet.com.tw
7

You might also like