PRODUCED BY AN AUTODESK STUDENT VERSION

20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1
SITUATION PLAN
2200 1260

P.N.
PLINTH 16

.
G.N
PLINTH 15

P.N.
TYPE 03

.
E2: 1132,300m. 24

G.N
TYPE 02 °9
N2: 1154,800 m. AIR BACKWASH '15
A B "

P.N.
A B 24

.
P P

650
G.N
°9
'1 4000 N
4000 E=225.647 5" 2 DUCT ND 50
24 E1: 1132,300 m. E=145.647
°9 N1: 1195,300 m. N=782.692
'1 5 N=782.692
N

1640
" PLINTH 14
E2: 1132,300m.
TYPE 02
N N2: 1154,800 m.
E=175.647 150 1215
N=782.692 1
SEE DRAWING 1 1
RAB03-DRA-IDOM-ZZZ-300-0591
1 ±≥≤ □Ø℄ XXXXXXXX

DMPF AIR BLOWER

3500
E=95.647

3800
FOUNDATION -0.03
O O

4190
N=782.692

3300
TOC.
E=95.647 1400
N=746.692 E=145.647 PLINTH 13
E=225.647

6000
N=746.692 TYPE 02 PLINTH 19
TYPE 1 TYPE 1 N=746.692
E=175.647 TYPE 01
N=746.692 GENERAL NOTES
· THE PROJECT LOCAL COORDINATES E=1.000,00m AND N=1.000,00m, ARE IN CORRESPONDANCE WITH
-0.03
UTM ZONE 37 WGS-84 ELLIPSOID REFERENCE SYSTEM COORDINATES X=504100,077m AND
TOC.

2200
PLINTH 04 Y=2503245.188m.

1810
3500
TYPE 01 · THE PROJECT NORTH FORMS AN ANGLE OF 24º9'15" WITH THE GEOGRAPHIC NORTH
6000

COUNTERCLOCKWISE.
· CONVERSION FORMULAS BETWEEN UTM COORDINATE SYSTEM (X, Y) AND PROJECT LOCAL
N N
PLINTH 12 2 COORDINATE SYSTEM (E, N) (a = 24º9'15"):
TYPE 02 SEE DRAWING E = X cosa + Y sena - 1483276,033 X = E cosa - N sena + 503596,822

60
RAB03-DRA-IDOM-ZZZ-300-0591 N = Y cosa - X sena - 2076806,059 Y = N cosa + E sena + 2501923,548
E=95.647 E=225.647 · PLANT VERTICAL DATUM ELEVATION ±0,000m = +5,40m ABOVE SAUDI ARAMCO VERTICAL DATUM =
N=662.692 E=145.647 E=175.647 N=662.692 DMPF AIR BLOWER +4,60m ABOVE MSL. NOTE A TOLERANCE ±0,20m IS ASSUMED FOR LEVEL REFERRED TO MSL
N=662.692 FOUNDATION 3000

3800
N=662.692 ACCORDING TO RAB03-REP-TJHK-ABZ-712-001 MARINE WORKS DESIGN BASIS REPORT.

4130
· FOR PROJECT ELEVATION CRITERIA REFER TO: RAB03-DRA-EPCC-700-0401 PLANT VERTICAL DATUM
1400 LEVEL DEFINITION ON RELATIVE LEVELS.
2 · ALL DIMENSIONS ARE IN mm, UNLESS OTHERWISE NOTED.

4000

6000
PLINTH 20 · ALL ELEVATIONS ARE IN m REFERRED TO PROJECT PLANT VERTICAL DATUM, UNLESS OTHERWISE
TYPE 01 FOOTING STREAM 1 & 2. PLAN VIEW (4 UNITS) NOTED.
M SCALE 1:25 · ALL COORDINATES ARE IN m, UNLESS OTHERWISE NOTED. M
2 · THE GROUNDWATER LEVEL IS ENCOUNTERED IN BOREHOLES AT -3,90m = +1,50m SAVD.
PLINTH 19 -0.03 TOC.-0.03 · FOR METAL PARTS EARTHING CONNECTION REFER TO UNDERGROUND GRID TYPICAL DETAILS
TYPE 03 PLINTH 05 TOC. DRAWING: RAB03-DTY-IDM-ZZZ-400-0303.
FLG. -0.20

2200
1630

170
TYPE 01 · CONCRETE DESIGN AND CONSTRUCTION SHALL BE IN ACCORDANCE WITH ACI 318-14 “BUILDING
CODE REQUIREMENTS FOR STRUCTURAL CONCRETE”, UNLESS OTHERWISE NOTED.

600
· NOMINAL MAXIMUM SIZE OF AGGREGATE: 20 mm ACCORDING TO ASTM C33.

430
E=225.647 · GENERALLY, ABOVE GROUND EXPOSED CORNERS SHALL HAVE A 25 mm BY 25 mm CHAMFER UNLESS
TYPE 1 TYPE 1 N=626.692 3 BOC. -0.63
SEE NOTE 1 OTHERWISE NOTED.

180
E=145.647

1112
N=626.692 · CORROSION INHIBITOR (CALCIUM NITRITE TYPE) SHALL BE APPLIED TO CONCRETE MIX.
E=95.647 · FOR CONCRETE GENERAL NOTES REFER TO DRAWING RAB03-DTY-IDOM-ZZZ-300-081.
E=175.647

75
N=626.692
N=626.692
L 1600 1400 2600 SEE NOTE 3
3000
BLINDING CONCRETE CONCRETE CHARACTERISTICS TABLE L

1448
SECTION 1-1 MATERIAL STRUCTURE TYPE
f'c min
(MPa) (28
EXPOSURE
REL. MAX.
WATER /
MIN. CEM.
CONTENT CEMENT TYPE
6000

SCALE 1:25 CATEGORY

days) CEM. (kg/m³)
TOC.-0.03
PLINTH 06

1440
FLG. -0.20 LEAN CONCRETE
TYPE 03

170
(LEVELLING, FILLING AND 12 - - - -
UNDERGROUND DUCT COVERING)

600
E=145.647 SEE NOTE 1 BLINDING CONCRETE

430
E=175.647 E=225.647 16 - - - -
N=542.692 BOC. -0.63 (UNDER FOUNDATIONS)
N=542.692

1560
N=542.692
E=95.647 PLINTH 08 TYPE 1 ASTM C150
SEA WATER RETAINING STRUCTURES
N=542.692 35 C4 & S2 0,40 370 +POZZOLAN OR
K TYPE 03 AND MARINE STRUCTURES (4)
SLAG CEMENT (1) K

75
CONCRETE
SEE NOTE 3 TYPE 1 ASTM C150

14700
UNDERGROUND STRUCTURES 35 C4 & S2 0,40 370 +POZZOLAN OR
SLAG CEMENT (1)
PLINTH 09 BLINDING CONCRETE
TYPE 03 2 DUCT ND 50
3 3300 ABOVEGROUND INDOOR STRUCTURES 31 C1 0,45 350 TYPE 1 ASTM C150

3500
ABOVEGROUND OUTDOOR
PLINTH 10 SECTION 2-2 STRUCTURES
31 C3 b) 0,45 350 TYPE 1 ASTM C150

E=95.647 TYPE 02
REINFOR-
N=506.692 E=145.647 ALL ASTM A615 GRADE 60 fy = 420 MPa -
E=225.647 CEMENT
N=506.692 N=506.692
TYPE 1 TYPE 1 CONCRETE CAST AGAINST TO EARTH 75mm -
J E=175.647 J
N=506.692 PILES 75mm -
SEA WATER RETAINING STRUCTURES
WELDED WASHER 2000 100mm -
AND MARINE STRUCTURES (4)
AIR BACKWASH SYSTEM. FOUNDATION. PLAN VIEW. NUT
70x70x20
650 1350 COVERS TANKING PROT.

3500
TOC. -0.03 (mm) UNDERGROUND STRUCTURES 75mm

PRODUCED BY AN AUTODESK STUDENT VERSION

SCALE 1:50 BASE PLATE REQUIRED (2)
PRODUCED BY AN AUTODESK STUDENT VERSION

BASE PLATE
HOLE Ø45 PLINTH 11 TOC. -0.13 FGL. -0.20

170
THREAD

FGL. -0.20 ABOVEGROUND INDOOR STRUCTURES 40mm -

TYPE 02
195

+0.20

1400
ABOVEGROUND OUTDOOR EPOXY PAINT
50mm
STRUCTURES PROT.REQUIRED(2)

870
670
CONSTRUCTION CONSTRUCTION NOTES:

1270
50

I 790 JOINT JOINT (1) 8%-10% OF MICROSILICA ADDITIVE I

1070
-0.80 -0.80
PIT STREAM-2 (2) REFER TO DRAWING RAB03-DTY-IDOM-ZZZ-300-0081 Civil and Steel structure General Notes (Sheet 2)
SEE NOTE 1 SEE NOTE 1 (3) CORROSION INHIBITOR (CALCIUM NITRITE TYPE) SHALL BE APPLIED TO CONCRETE MIX
+0.15 (4) STRUCTURES IN SPLASH ZONE AND OFF-SHORE INCLUDED
LEVELING

400

400
4000
WASHER PLINTH 20 BOC.-1.20 BOC.-1.20
GROUT PARTICULAR NOTES
TYPE 04
3100

1. FOR TANKING PROTECTION DETAILS IN UNDERGROUND STRUCTURES ABOVE THE GROUND WATER

75

75
LEVEL (BOC ABOVE -2,90m) REFER TO DETAILS F6 & F8 OF DRAWING RAB03-DTY-IDOM-ZZZ-300-081 Civil
PLINTH 11 and Steel Structure General Notes (SHEET 2).
SEE NOTE 3 BLINDING CONCRETE SEE NOTE 3 BLINDING CONCRETE
TYPE 02 2. FOR TANKING PROTECTION DETAILS IN UNDERGROUND STRUCTURES BELOW THE GROUND WATER
200 800 200 200 800 200 LEVEL (BOC BELOW -2,90m) REFER TO DETAILS F7, F9 & F10 OF DRAWING RAB03-DTY-IDOM-ZZZ-300-081
P.N.

H A 1200 1200 Civil and Steel Structure General Notes (SHEET 2). H
.
G.N

3. FOR SOIL COMPACTATION REQUIREMENTS PRIOR TO BLINDING CONCRETE PLACEMENT REFER TO

24 B SECTION 3-3 SECTION 4-4 NOTES F1 TO F5 OF DRAWING RAB03-DTY-IDOM-ZZZ-300-081 Civil and Steel Structure General Notes
°9 2 PLINTH 17 SCALE 1:25 SCALE 1:25
'15 (SHEET 2).
" TYPE 03
4. REFER TO DRAWING RAB03-DTY-IDOM-ZZZ-300-081 FOR STRUCTURAL FILL DEFINITION.
3200
1070

2500 BOLT M24

N
PLINTH 10
1250 1250 PARTICULAR NOTES
800

TYPE 02

1200 1200 T.O.C.: TOP OF CONCRETE

F.F.L. : FINISHED FLOOR LEVEL
200 800 200 200 800 200 T.O.S.: TOP OF STELL
G B.O.S.: BOTTOM OF STEEL G
525

-0,07
T.O.C.
900

3200

200

200
REFERENCE DRAWINGS
PLINTH 07
1800

750

1 2 3 TYPE 03 · RAB03-DTY-IDOM-ZZZ-300-0081 Civil and Steel Structure General Notes

12930
· RAB03-DRA-IDOM-FAZ-300-0532 Air Backwash system Foundation Drawings. Reinforcing & Bending Schedule
1 1 -0.03

1200

1200
· RAB03-DRA-IDOM-FAZ-300-0533 Air Backwash system Structure Drawings. Steel structure

800

800
-0.13
TOC.
1360

TOC. · RAB03-DRA-EPCC-ZZZ-700-0009 Plant Layout

900

+0,15
NUT
3 3 4 4 · RAB03-DRA-EPCC-ZZZ-700-0401 Plant Vertical Datum Level definition and relative levels
-1,50 T.O.C. · RAB03-DGD-SIDM-FAA-311-002 CIVIL GUIDE DRAWING.AIR BACKWASH STREAM 1. PLAN VIEW & VIEW A
F F
525

T.O.C. · RAB03-DGD-SIDM-FAB-311-002 CIVIL GUIDE DRAWING.AIR BACKWASH STREAM 2. PLAN VIEW & VIEW A

200

200
· RAB03-DGD-SIDM-FAA-311-003 CIVIL GUIDE DRAWING.AIR BACKWASH STREAM 1. PLAN VIEW
THREAD

1640

PLINTH 08 · RAB03-DGD-SIDM-FAA-311-003 CIVIL GUIDE DRAWING.AIR BACKWASH STREAM 2. PLAN VIEW

TYPE 03 PLINTH 06
115

· RAB03-DGD-SIDM-FAA-311-004 CIVIL GUIDE DRAWING. AIR BACKWASH STREAM 1 & 2. PLAN VIEW &
TYPE 03
P.N.
75

SECTIONS
.

875 750 875 FOOTING PLINTH TYPE 1. PLAN VIEW FOOTING PLINTH TYPE 2. PLAN VIEW
G.N

E1: 1132,300 m. · RAB03-DRA-IDOM-ZZZ-300-0591 Electrical Underground Network. Conduits

24 (8 UNITS) (10 UNITS) · RAB03-CAL-IDOM-FAZ-300-0360 Air Backwash system Foundation and Structure Calculation
N1: 1195,300 m.
1248

SQUARE PLATE ° 9'1 3000 SCALE 1:25 SCALE 1:25

2 5"
100x100x20
2360

1200
FOOTING TYPE 1. PLAN VIEW
N 350 850
1112

0 0,1 0,5m
SCALE 1:5
(6 UNITS)
E DETAIL PRE-INSTALLED BOLT M24 E
SCALE 1:25
SCALE 1:5
1 TOC. -0.03 TOC. -0.03 TOC. -0.03 TOC. -0.07
SEE DRAWING 1140 0 0,5 1 2 2,5m
140

TOC. -0.13
RAB03-DRA-IDOM-ZZZ-300-0591 FGL. -0.20 FGL. -0.20 FGL. -0.20 SCALE 1:25
170

170

170

270
FGL. -0.20 FGL. -0.20
3 A PLINTH 05

3000
TYPE 01 3400

670
670

670
PLINTH 12 0,5 5m
1 2 B 0 1 2 3 4
1770
3800

CONSTRUCTION CONSTRUCTION CONSTRUCTION

1860
870

DMPF AIR BLOWER TYPE 02 SCALE 1:50

4050

JOINT JOINT JOINT

670

FOUNDATION CONSTRUCTION CONSTRUCTION -0.60 -0.60 -0.60 -0.

1270
1270

1270
1270

2500 1800 JOINT JOINT

1070

-0.80 PLINTH 22 -0.80 SEE NOTE 1 SEE NOTE 1 SEE NOTE 1

875 750 875 525 750 525 TYPE 01
SEE NOTE 1 SEE NOTE 1

600
600

600
PIT STREAM-2
D DBOC.
400

400

ANCHOR BOLTS 8M24 ANCHOR BOLTS 8M24 BOC.-1.20 BOC.-1.20 BOC.-1.20 BOC.-1.20 BOC.-1.20
-0.03
PRE-INSTALLED PRE-INSTALLED
TOC.
02 ISSUED FOR CONSTRUCTION 28/05/20 MVA DRT LJMP
2200

4300

+0.20 +0.20
1650

75

75

75
75

75
+0.15 +0.15
B.O.S. B.O.S. 01 ISSUED FOR CONSTRUCTION 13/04/20 CJL DRT LJMP
T.O.C. T.O.C. BLINDING CONCRETE BLINDING CONCRETE BLINDING CONCRETE BLINDING CONCRETE BLINDING CONCRETE
SEE NOTE 3 SEE NOTE 3 SEE NOTE 3 SEE NOTE 3 SEE NOTE 3
REV DESCRIPTION DATE DRAWN CHECKED APPROVED
200 800 200 PLINTH200
13 800 200 350 800 350 300 800 300 600 800 600
220

220

-0.20 -0.20 2 1200 TYPE 02 1200 1500 1400 PROJECT 2000

160

F.F.L. F.F.L.
SECTION
SEE DRAWING
3-3
RAB03-DRA-IDOM-ZZZ-300-0591 SECTION 4-4 SECTION 5-5 SECTION 6-6
RABIGH 3 INDEPENDENT
SECTION 7-7
WATER PROJECT
-0,07 150 -0,07 150
T.O.C. T.O.C. SCALE 1:25 SCALE 1:25 SCALE 1:25 SCALE 1:25 OWNER SCALE 1:25 EPC CONTRACTOR
PLINTH 04
C TYPE 01 C
3800
4190
1650

1650

6
CONSTRUCTION
1200 1200 8
1500
5000

CONSTRUCTION JOINT
JOINT 200 800 200 200 800 200 350 800 350
-1.50 -1.50 2000
T.O.C. T.O.C. -0.03 600 800 600
PLINTH 21 TOC. AUTHOR
2200

100
1810

TYPE 01
SEE NOTE 1 SEE NOTE 1
300
200

200

B B
600

600

-2.10 -2.10
B.O.C. B.O.C. 3
DMPF AIR BLOWER
-0.03
1200

1200

1400

1000
FOUNDATION -0.03 -0.07
800

800

800

800
-0.13 TITLE
75

75

PLINTH 14 TOC. TOC. TOC.

TOC. AIR BACKWASH SYSTEM
SEE NOTE 3 BLINDING CONCRETE SEE NOTE 3 BLINDING CONCRETE 3 4000 3 4 TYPE 03 4 FORMAT
5 5 7 7 FOUNDATION DRAWING A0
SECTION 1-1 SECTION 1-1
2-2 A B AIR BACKWASH SYSTEM. FOUNDATION STREAM-2. PLAN VIEW.
FORMWORKS. SCALE
200

200

SCALE 1:75
300

SCALE 1:25 SCALE 1:25 AIR BACKWASH SYSTEM. FOUNDATION STREAM-1. PLAN VIEW. IND.

100
SCALE 1:75
INTERNAL DOCUMENT NUMBER SHEET
A FOOTING PLINTH TYPE 1. PLAN VIEW FOOTING PLINTH TYPE 2. PLAN VIEW RAB03-DRA-IDOM-FAZ-300-0361 A
8
(8 UNITS)
SCALE 1:25
(10 UNITS)
SCALE 1:25
6 PROJECT DOCUMENT NUMBER 2/3
FOOTING PLINTH TYPE 3. PLAN VIEW FOOTING PLINTH TYPE 4. PLAN VIEW RAB03-DRA-IDOM-FAZ-300-0361
(9 UNITS) (1 UNITS)
THIS DOCUMENT IS THE PROPERTY OF EPC CONTRACTOR. IT CANNOT BE USED, REPRODUCED, TRANSMITTED AND/OR DISCLOSED WITHOUT PRIOR WRITTEN PERMISSION OF EPC CONTRACTOR.
SCALE 1:25 SCALE 1:25
20 19 18 17 16 15 14 13 12 11
PRODUCED BY AN AUTODESK STUDENT VERSION 10 9 8 7 6 5 4 3 2 1