Scribd
Upload
31 views

User Guide Dataloger Setup

The document provides instructions for setting up a datalogger on a Eurosonic 2000 device. It describes setting the start time, interval, and stop time for logging data, selecting to save the logged data to a buffer, connecting the device to a PC with an RS232 cable to download the buffered data to the PC, and reading a saved log file on the PC. It also provides instructions for using the PC as a datalogger by selecting the logging interval and starting and saving the log directly on the PC.

Uploaded by

Marco
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
31 views

User Guide Dataloger Setup

The document provides instructions for setting up a datalogger on a Eurosonic 2000 device. It describes setting the start time, interval, and stop time for logging data, selecting to save the logged data to a buffer, connecting the device to a PC with an RS232 cable to download the buffered data to the PC, and reading a saved log file on the PC. It also provides instructions for using the PC as a datalogger by selecting the logging interval and starting and saving the log directly on the PC.

Uploaded by

Marco
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

USER GUIDE DATALOGER SETUP :

EUROSONIC 2000 HH SETUP

1) Choose item to log on : MENU M50 ENT

ENT

2) Setup the Start , interval and stop time for logging on MENU M51

START TIME >


TIME ON M60

3) MENU M52 SELECT “TO BUFFER”

ENT

4) When finished logging , connect to PC with an RS232 cable (RS232/USB adapter)


ON M62 SETUP : 9600 8N1

ENT
5) Run Eurosonic.exe select the right Com and Baud rate and press Connect

6) To download the buffer to PC press ReadBuffer .

Choose where to
save the log file
Using the PC as data logger.

1) Press Logger button.


2) Select log Interval “ Logg.Int [s]” and unit /sec, /min, /hour, /day
3) Press Start to start the logging
4) On the Save As dialog window, choose where to save the log file .

To read a log file press Read log , on Open dialog window select the file to read.
EUROSONIC 2000 WM SETUP (PC logger)

1) MENU M62 SERIAL PORT SET UP: 9600 8N1

2) SELECT COMUNICATION PROTOCOLL MENU M63

3) MENU M52 SEND LOG DATA TO INTERNAL SERIAL BUS

4) Connect to PC and run Eurosonic.exe , select WallMount.

You might also like