CODE FUNCTION PERFORMED

*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cel
l phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you
should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd
Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols)
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" a
nd "+" symbols)
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" a
nd "+" symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that "All Calls" are divert
ed to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" c
alls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power sa
ving feature "SIM Clock Stop Allowed", it means you will get the best standby ti
me possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of
last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you n
eed to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
12345 This is the default security code
press and hold # Lets you switch between lines

[Secret Codes for 3330] Imei Information :-

To view the imei number on this model simply type *#06#
Software version type *#0000#
*#170602112302# shows the SW version.
Service Provider Lock Information :-
Service Provider Lock Service Provider lock is the lock to your p
hone which is implement by your service provider e.g. Orange onto your sim card.
The phone is usually locked to a certain SP but it can be unlocked allowing you
access to other service providers that provide a better deal. The same effect c
an also be used by using a Dual sim, you could have two sim cards in one phone a
llowing you to switch between sims and SP 1. First sim = Orange 2. Second sim =
One2One
Short Message Serivce Centre Numbers ( FREE SMS ):-
SMSC (Short Message Serivce Centre Numbers) SMS Centre number all
ow you to send free sms, by changing your message centre number like this:
1. Go to messages
2. Message Settings
3. Set 1
4. Message Centre Number
5. Then change the number to one from SMSC Number section
(from SMSC #'s given below)
What does this do?
Instead of paying for your messages, you can alter a number in your phone to sen
d to a different centre. This cannot charge you, and consequently you have free
SMS!
How does it work?
When you send a text message, it is first transmitted to your network's routing
centre, called the Short Message Service Centre, or SMSC. This SMSC is generally
a telephone number, normally a memorable one- i.e. Orange's is 0973 100973. Her
e, it is sent to the recipient's network's SMSC, where it is then forwarded to t
heir phone. The whole process takes only seconds, but the vital part is when it
reaches your SMSC, because then it is forwarded, and you are charged according t
o your tariff. If you, however, change your SMSC number to one below, the networ
k who forward the message will not know who you are, and consequently cannot cha
rge you. Clever huh?
Does it always work?
No! It can take hours to find a number that hasn't been blocked by your network-
they usually carry out checks monthly and bar any numbers known to be forwardin
g SMS. Also, I understand that Orange and all networks in Denmark have barred al
l numbers aside from their own- so it won't work with Orange or Danish networks.
ISDN Number :-
ISDN number For checking ISDN number enter *#92772689#
Warranty Menu To view the warranty menu enter *#92702689# [*#wa
r0anty#]
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes you capebel of transferring user data if you have
the gear for it
6) shows how many houres the phone has been on Warranty
Menu To view Warranty menu enter *#92702689# [*#war0anty#] Phon
e asks 'warranty code:' Press the following warranty code: 6232 (OK) : Dis
plays the Month and Year of Manufacture (MMYY)
7332 (OK) : Displays the date of the last repairment - if found ('DATE NOT SAVED
'...) 7832 (OK) : Displays (if found) the date where the phone was purchased ('D
ATE NOT SAVED'...)
9268 (OK) : Displays Serial Number
37832 (OK) : Set the Purchasing Date MMYY (Warning: You can only do this once -
So be careful ...)
87267 (OK) : Transfers ALL phone numbers, pictures, sounds from one phone to ano
ther eg. if broken (via IRport.)
 Sim Clock Stop :-
To view if sim clock can be stoped enter *#746025625# [*#sim0cl
ock#] (Sim-clock-stop is a kind of standby mode which will save battery time) Ma
y not work with all firmware versions.
Enhanced Full Rate/Half Rate Enhanced Full Rate Codec :-
(EFR) For activation enter *#3370#
For deactivation enter *#3370*
Enhanced Full Rate Will give you much better sound quality when
you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (
AlgebraicCode Excitation Linear Prediction) compression technology. This technol
ogy allows for much great voice quality in the same number of bits as the older
Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Codi
ng with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up
more space on the network, so they can charge you more) - Talk-time is reduced w
ith about 5%
Half Rate Codec
For activation enter *#4720#
For deactivation enter *#4720* In all cases the phone will auto
matically restart.
Half Rate will give you bad soundquality, which gives the servi
ceprovider the opportunity to have more calls on the network, and you might get
a lower charge from them. - Will give you 30% longer talk-time.
Imei Code :-
To View IMEI (International Mobile Equipment Identity) enter *#
06# Firmware Versions
Check To view the Firmware version enter *#170602112302#
Restore Factory Settings :-
To restore factory settings (Memory, language, counters not inc
luded) enter *#7780#
Manufacturer Information To view Week and Year of manufactureen
ter *#3283# [*# D A T E #] The last two digits are the year. If the year is 95,
the first two digits are the month. For 96 the first two digits are the week of
the year.
Firmware Version :-
To view the firmware version enter *#170602112302# or *#9999# O
n newer phones, the code has been changed to *#682371158412125#
SAMSUNG
Samsung Reset Codes
You can try these in case you downloaded corrupted or incompatible Java midlets
or other media, which are causing problems with the phone.
*2767*JAVA# Java Reset and (Deletes all Java Midlets)
*2767*MEDIA# Reset Media (Deletes All Sounds and Pics)
*2767*WAP# Wap Reset
*2767*CUST# Reset Custom EEPR0M
*2767*FULL# Reset Full EEPR0M (Caution)
For example : *2767*JAVA# would be keyed in as *2767*5282#
Note : Not all codes will work with SGH-C100.

Other Samsung Codes

*#06# IMEI code

*#9998*4357# Help Menu
*#9998*5282# Java menu (GRPS/CSD settings for JAVA server)
*#9999#0# Monitor Mode
*#9999# or *#9998*9999# Software Version
*#8888# or *#9998*8888# Hardware Version
*#9998*746# or *#9998*0746# or *#0746# Sim Infos
*#9998*523# or *#9998*0523# or *#0523# Display Contrast
*#9998*842# or *#9998*0842# or *#0842# Vibration On (until you push OK)
*#9998*289# or *#9998*0289# or *#0289# Buzzer On (until you push OK)
*#9998*288# or *#9998*0288# or *#0288# Battery & Field Infos
*#9998*377# or *#9998*0377# Error log
*#9998*778# or *#9998*0778# or *#0778# Sim Service table
*#9998*782# show date and alarm clock
*#8999*638# show network information
*#9998*5646# change operator logo at startup
*#9998*76# production number
*#9998*968# view melody for alarm
*#9998*585# Non-Volatile Memory (NVM)
*#3243948# Digital Audio Interference Off
*#32436837# Digital Audio Interference On
SAMSUNG T100 SECRET CODES
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0001# -> Show Serial Parameters
*2767*3855# -> Full EEPROM Reset ( THIS CODE REMOVES SP-LOCK!!!! but
also
change IMEI to 447967-89-400044-0, you must use CHGIMEI to
restore it)
*2767*2878# -> Custom EEEPROM Reset
*#8999*228# -> Battery status (capacity, voltage, temperature)
*#8999*246# -> Program status
*#8999*289# -> Change Alarm Buzzer Frequency
*#8999*324# -> Debug screens
*#8999*364# -> Watchdog
*#8999*377# -> EEPROM Error Stack
*#8999*427# -> Trace Watchdog
*#8999*523# -> Change LCD contrast
*#8999*544# -> Jig detect
*#8999*636# -> Memory status
*#8999*746# -> SIM File Size
*#8999*778# -> SIM Service Table
*#8999*785# -> RTK (Run Time Kernel) errors
*#8999*786# -> Run, Last UP, Last DOWN
*#8999*837# -> Software Version
*#8999*842# -> Test Vibrator
*#8999*862# -> Vocoder Reg
*#8999*872# -> Diag
*#8999*947# -> Reset On Fatal Error
*#8999*999# -> Last/Chk
*#8999*9266# -> Yann debug screen (=Debug Screens?)
*#8999*9999# -> Software version
*0001*s*f*t# -> Changes serial parameters (s=?, f=0,1, t=0,1)
(incomplete)
*0002*?# -> unknown
*0003*?# -> unknown

SAMSUNG V200 SECRET CODES

v200 Unlock Code-> *2767*7822573738#
*#9324# Netmon (press the hangup key to exit)
*#9998*JAVA# Edit GPRS/ CSD settings (S100 Only)
*#9998*Help# Help screen/ List of codes
*#9998*LOGO# Change operator Logo
*#9998*RTC# RTC Display
*#9998*Bat# Battery Status
*#9998*Buz# Turns Buzzer ON
*#9998*Vib# Turns Vibrator ON
*#9998*LCD# LCD Contrast
*#9998*9999# Softwre Version
*#9998*8888# Hardware Version
*#9998*377# NVM Error Log (?????)
*#9998*NET# SIM Network ID
*#9998*778# SIM Serv. Table
*#9998*SIM# SIM Info
*#9998*PN# Production No.
*#9998*968# Reminder Tune
*#9998*NVM# Displays Non-Volitile Memory Status
*#9999*C# ???????????????????
*#06# Displays phones I**I No.
*#9998*2576# Forces SIM Error
*#9998*DEAD# Forces Phone Crash
*2767*MEDIA# Resets the medis on the phone (deletes all downloaded
pics/tones)
*2767*FULL# Resets the EEPRON *DANGEROUS*
*2767*CUST# Resets the Custom EEPRON
*2767*JAVA# Resets JAV downloads (deletes all downloaded midlits)
*2767*STACKRESET# Resets Stack
*2767*225RESET# ????????????????? * Dangerous *
*2767*WAP# Resets WAP Setting & Deletes Favorites

SAMSUNG A800 SECRET CODES

The universal unlock code is *2767*637# do this with out your sim in