D I G G I N G S Y S T E M S P A R T S C ATA L O G

S P R I N G 2 017
 T E RRY D O W NIN G / V P/ M A N A G E R O F O P E R AT I O N S ,
WESTERN DIVISION, DAVIS H. ELLIOT
C ONST RUC TION C OMPANY
TA B L E O F
CONTENTS
04 Best Practices for your
Digging System
06 Chain Guides
08 The DuraTooth® Advantage
DIGGING SYSTEM SIZES
10 19K Digging Systems
12 33K Digging Systems

We know what it’s like on the jobsite. You need to stay on schedule to 19K C12, C14, C16, C16X, C24X, C30X 16 35K Digging Systems
20 33K/35K Digging Systems
stay profitable. That’s why Ditch Witch® chains, specially manufactured
24 50K Digging Systems
headshaft sprockets, and digging teeth are designed to work together 1030, 1230, 1330, 1820, C12, C14, 36 70K Digging Systems
as a system to provide unparalleled trenching performance. And that’s C16, C16X, C24X, C30X, RT10, RT12,
40 70K/110K Digging Systems
why they’re backed by knowledgeable, experienced dealers providing RT16, RT20, RT24, SK350, SK500,
expert service and support. 33K/35K SK600, SK650, SK750, SK752,
SK755, SK850, SK1050, R150,
42 110K Digging Systems
46 70K/110K Digging Systems
We’re here to help you get the job done. Efficiently. And effectively. R230, R300, XT855, 410SX, 420SX, 52 Conversion Sprockets
After all, RT30 (35K only) 58 Plow Blades & Accessories
66 Earth Saw
68 Microtrenching
3610, RT36, 3700, RT40, RT45,
50K RT55, XT1600
72 Roto Witch®
76 Vacuum Accessories
78 Uptime Kits

RT55, RT70, RT75, RT80, RT80 QUAD,

70K/110K RT90, RT95, RT100, RT115, RT115
QUAD, HT115, RT120, RT120 QUAD

RT185, HT185
150K/225K (Contact your local dealer.)
 B E S T P R A C T I C E S F O R Y O U R D I G G I N G SY S T E M ditchwitch.com

No matter what brand you use, proper monitoring and maintenance of your equipment
and components will keep them performing their best. Instead of seeing upkeep as an expense, view it as
an investment in your profitability since efficient, effective digging has a direct impact on your bottom line.

WORN DIGGING TEETH TO GET THE BEST 1 2 3

Dull or worn digging teeth will not cut or carry PERFORMANCE Replace sprockets and Check your digging teeth Maintain the proper tension
soils out of the trench efficiently, leading to digging chains at the regularly and replace on the digging chain. Refer
FROM YOUR
decreased productivity. same time. Replacing worn digging teeth to your operator’s manual
MACHINE, one without the other immediately. for the correct tension.
ALWAYS FOLLOW will cause premature
THESE THREE wear of the new Your Ditch Witch ® dealer can help you determine the right
SIMPLE STEPS: components. digging chain and tooth configuration for your application.

CHAIN ROLLER
Primary wear on a digging chain occurs at
the chain roller. As chain rollers wear, they
begin to resemble an apple core. At this
point, the chain should be replaced to
avoid potential downtime.

WORN CHAIN SIDE BAR

The secondary wear of a digging chain occurs on
side bars. Sliding wear happens over time as the
side bars move along the digging boom.

WORN SPROCKET
Chain and sprockets have the same pitch
dimensions. Changing one without changing the
other will result in a mismatch and lead to
premature wear of the new component.

4 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 5

 CHAIN GUIDES ditchwitch.com

UN D E R S TA N D IN G P I T C H
Digging chain is categorized three ways: by tooth type, tensile strength and pitch. In this catalog, you’ll
find four types of teeth: DuraTooth®, Alligator, Shark®, and a combination. Ditch Witch® chain is available
No matter what your task, having the right tool for the job is critical for in tensile strengths of 19,000 up to 225,000 pounds. But pitch is sometimes hard to understand.
success. It's no different with digging chain. Ditch Witch® digging chain comes in a variety
of configurations that will cut through almost any kind of ground condition you encounter.
CHAIN IS AVAILABLE IN 2 PITCH AND 4 PITCH
Selecting the right one can go a long way toward keeping you productive and preventing
unnecessary wear and tear on your equipment.

2-PITCH CHAIN 4-PITCH CHAIN

CHAIN SELECTOR
Sandy Soft Medium Hard Rocky Sticky
Key =Best =Better =Good
Soil Soil Soil Soil Soil Soil

4-Pitch DuraTooth®
Two-pitch chain has a sidebar, Four-pitch chain has a sidebar,
4-Pitch DuraTooth C2X
or tooth, on every station. or tooth, on every other station.
2-Pitch DuraTooth
2-Pitch DuraTooth C2X
Shark® Chain II
Weld-on Alligator MEASURING PITCH
Bolt-on Alligator
Bolt-on Alligator K-style
Shark/DuraTooth Combo
Shark/DuraTooth C2X Combo
Alligator/DuraTooth Combo
Alligator/DuraTooth C2X Combo
Alternating Side Bar
Bolt-on Shark

A pitch is the distance between chain pins. This chain is 12 pitches long. Pitch size is
1 PITCH
measured from the center of a chain pin to the center of the next. There are five pitch
sizes: 1.686", 2", 3.110", 4.5", and 4.540".

6 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 7

 T H E D U R AT O O T H ® A D VA N TA G E ditchwitch.com

Our exclusive DuraTooth design was a

MORE THAN 70 YEARS AGO, breakthrough in trenching technology,
we introduced the world’s first service line improving performance and efficiency of
the chain with a cupped digging tooth.
D U R AT O O T H ® C 2 X
trencher. And we’ve never stopped innovating.
And it’s still the gold standard today.

D U R AT O O T H

The only tooth that Sophisticated In field tests, the DuraTooth C2X Designed for
has tungsten carbide manufacturing process DuraTooth C2X lasted manufacturing heavy-duty
on the front, back and ensures a more efficient twice as long as other process includes a performance with
cutting edge—up to surface application of digging teeth in various six-point inspection Ditch Witch® 50K,
70 percent more carbide and penetration soil conditions—a to ensure long-lasting 70K/110K and
tungsten carbide than into the tooth, resulting return on investment quality and value. 150K/225K
Up to 35 percent more Tungsten carbide protects the DuraTooth manufacturing Digging chain compatibility that of any tooth on in longer life and that no competing tensile-strength
tungsten carbide—on the cutting edge, where the process includes a (tensile strength): 33K/35K, the market. increased productivity. tooth can match. chains.
surface, in the base metal greatest impact from the soil six-point inspection to 50K, 70K/110K, and
and in the weld—than any occurs, to ensure greater ensure long-lasting 150K/225K.
competitors’ standard cupped durability and performance. quality and value.
Only Ditch Witch digging components, like DuraTooth,
tooth, for longer-lasting
are designed and specifically manufactured
productivity and reduced
to work together as a system for optimal performance.
downtime and expense.

8 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 9

 19 K D I G G I N G SY S T E M S C12, C14, C16, C16X, C24X, C30X ditchwitch.com

19K CHAINS FEATURES/BENEFITS OF OPTICUT™

The all-new Ditch Witch® 19K digging system offers the exclusive OptiCut™ chain with
integrated tooth technology. Its rugged design delivers durable performance to optimize
productivity in all soil conditions, with 19,000 lbs of tensile strength and maintenance-free

SPRING BOOMS
teeth that match the life of the chain. Optimal performance. Minimal maintenance.
That's the OptiCut digging system.

OPTICUT COMBO SHARK /CUP ™ ®

Pitch Length Part Number Description Digging Depth
40 140-1394 18" Boom Assembly (19K) 18"
Pitch Length Part Number 3.5" 46 140-1395 24" Boom Assembly (19K) 24"
40 135-1518 52 140-1418 30" Boom Assembly (19K) 30"
46 135-1520 58 140-1403 36" Boom Assembly (19K) 36"
52 135-1528
58 135-1536

OPTICUT SHARK
Pitch Length Part Number 3.5"
40 135-1519
46 135-1522
52 135-1529
58 135-1539

OPTICUT 4 PITCH DURATOOTH ®

Pitch Length Part Number 3.5" SPROCKETS

19K DIGGING SYSTEMS

40 135-1517
46 135-1521
52 135-1527
Part Number Description
58 135-1538
140-1347 19K Sprocket (11T)*
140-1392 Boom Tail Sprocket Assembly
* requires hub spacer 302-0907

MASTER LINK
Part Number Description
140-1421 Master Link (19K)

10 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 11

 C12, C14, C16, C16X, C24X, C30X, 1030, 1230, 1330, 1820, RT10,

3 3 K D I G G I N G SY S T E M S RT12, RT16, RT20, RT24, SK350, SK500, SK600, SK650, SK750,

SK752, SK755, SK800, SK850, SK1050, SK1550, ST37X, R150, ditchwitch.com
R230, R300, XT855, 410SX, 420SX

2 PITCH 33K CHAINS

DURATOOTH ®
Pitch Length Part Number

BARE CHAINS
4" 6"
44 131-292
52 133-024 133-023
62 133-021 133-022
2 PITCH
68 133-025 133-027
Pitch Length Part Number
84 133-026 133-028
16 137-014
44 131-294
4 PITCH 52 137-015
62 137-016
Pitch Length Part Number 84 131-144
3" 4" 6" 8" 10" 12" 14" 92 137-018
52 133-029 133-030 133-031 133-033
60 131-295
62 133-080 133-081 133-082
68 133-039 133-040 133-041 133-042 133-043 133-044 133-045
74 131-298
84 133-049 133-050 133-051 133-052 133-054
90 131-299
100 133-060

4 PITCH
Pitch Length Part Number

DURATOOTH COMBOS
16 137-010
44 131-293
52 137-011
60 131-296
62 137-017
ALLIGATOR/DURATOOTH SHARK®/DURATOOTH
68 131-044
72 137-012
Pitch Length Part Number Pitch Length Part Number

33K DIGGING SYSTEMS

4" 4" 74 131-297
52 131-401 52 131-409 84 131-045
62 131-406 62 131-414 90 137-013
68 131-402 68 131-410 100 131-046
84 131-403 84 131-411

“The Shark® teeth are the best thing I’ve ever used. We dig in some pretty hard clay—sometimes it’s
like digging through concrete—and it really gets the job done. I wouldn’t use anything else.”
– Fred Martin, Volvo Rents Service Manager

12 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 13

 C12, C14, C16, C16X, C24X, C30X, 1030, 1230, 1330, 1820, RT10,

3 3 K D I G G I N G SY S T E M S RT12, RT16, RT20, RT24, SK350, SK500, SK600, SK650, SK750,

SK752, SK755, SK800, SK850, SK1050, SK1550, ST37X, R150, ditchwitch.com
R230, R300, XT855, 410SX, 420SX

33K CHAINS
BOLT-ONS
ALLIGATOR
AUGERS
Pitch Length Part Number
4"
52 133-150
Part Number Model
145-309 1020/1220
320-267 1030, 1230, 1330
145-285 1820
145-206 SK3TR, SK5TR, 410SX
300-8782 RT10, RT12, RT16,
RT20, RT24
300-3472 1TRI, TR4, SK4TR
140-1182* 1TRH
300-3455 1TRH
SHARK®
* Begins with serial number 394.
Pitch Length Part Number
4"
52 133-148
62 133-153
68 133-149

TOOTH ADAPTERS
Part Number Description Size
136-029 Tooth Spacer 1"

REPAIR STATIONS 136-047 Tooth Adapter 8" width

33K DIGGING SYSTEMS

136-048 Tooth Adapter 10" width
136-049 Tooth Adapter 12" width

Part Number MASTER PINS

131-035
Part Number Description
135-1027 Chain Pin You can find a large inventory of genuine Ditch Witch® parts, for equipment new and old, at your
135-1085 Lock Key Ditch Witch dealer. If we don’t have the part you need, we can get it fast—usually within 24 hours.

14 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 15

 1030, 1230, 1330, 1820, C12, C14, C16, C16X, C24X, C30X, RT10, RT12,

3 5 K D I G G I N G SY S T E M S RT16, RT20, RT24, RT30, SK350, SK500, SK600, SK650, SK750, SK752,
SK755, SK800, SK850, SK1050, SK1550, ST37X, R150, R230, R300, ditchwitch.com
XT855, 410SX, 420SX

35K CHAINS
BARE CHAINS
DURATOOTH COMBOS ®

ALLIGATOR/DURATOOTH
2 PITCH Pitch Length Part Number
4" 6"
4 PITCH Pitch Length Part Number 52 137-229
16 137-208 62 137-230
Pitch Length Part Number 52 137-209 68 137-231
52 130-1101 62 137-210 78 135-1456 135-1457
62 130-1102 68 135-1531 84 137-232
68 130-1103 92 137-211
84 130-1104

DURATOOTH ®

35K DIGGING SYSTEMS

2 PITCH SHARK®/DURATOOTH
4 PITCH Pitch Length Part Number Pitch Length Part Number
4" 6" 4" 6"
Pitch Length Part Number 44 135-1600 52 137-233 135-1021
4" 6" 52 137-218 137-217 62 137-235 135-1633
52 135-1601 135-1605 62 137-215 137-216 68 137-236 135-1445
62 135-1602 135-1606 68 137-219 137-221 78 135-1454 135-1455
68 135-1603 135-1607 78 135-1450 135-1451 84 137-237
84 135-1604 135-1608 84 137-220 137-222

16 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 17

 1030, 1230, 1330, 1820, C12, C14, C16, C16X, C24X, C30X, RT10, RT12,
3 5 K D I G G I N G SY S T E M S RT16, RT20, RT24, RT30, SK350, SK500, SK600, SK650, SK750, SK752,
SK755, SK800, SK850, SK1050, SK1550, ST37X, R150, R230, R300,
ditchwitch.com
XT855, 410SX, 420SX

35K CHAINS
SHARK II
® Pitch Length Part Number
4" 6"

REPAIR STATIONS
52 131-146 131-180
62 131-320 131-321
68 131-148 131-182
78 135-1458 135-1459
84 131-149 131-183

MASTER PINS
Part Number Description Part Number Description
131-001 Standard 135-1028 Chain Pin
131-164 Shark II (4") 135-1085 Lock Key
131-185 Shark II (6")

AUGERS
Part Number Model(s)
145-309 1020/1220
320-267 1030, 1230, 1330
145-285 1820
145-206 SK3TR, SK5TR, 410SX

BOLT-ONS
300-8782 RT10, RT12, RT16,
RT20, RT24
301-5389 RT30
300-3472 1TRI, TR4, SK4TR
140-1182* 1TRH
300-3455 1TRH
140-1350** C12, C14, C16
140-1371** C16X, C24X, C30X

35K DIGGING SYSTEMS

* Begins with serial number 394.
** Add auger spacer 301-7048 (35K) or 302-0691 (19K)

ALLIGATOR
SHARK TOOTH ADAPTERS
Pitch Length Part Number
Pitch Length Part Number 4" 6" Part Number Description Size
4" 52 137-226 136-029 Tooth Spacer 1"
52 137-223 62 137-227 131-003 Cast Tooth Adapter 8" width
62 137-224 68 137-228 131-004 Cast Tooth Adapter 10" width
68 137-225 78 135-1452 135-1459 131-005 Cast Tooth Adapter 12" width

18 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 19

 1030, 1230, 1330, 1820, C12, C14, C16, C16X, C24X,
C30X, RT10, RT12, RT16, RT20, RT24, SK350, SK500,
3 3 K / 3 5 K D I G G I N G SY S T E M S SK600, SK650, SK750, SK752, SK755, SK800, SK850, ditchwitch.com
SK1050, SK1550, ST37X, R150, R230, R300, XT855,
410SX, 420SX, RT30 (35K ONLY)

33K/35K TEETH & BITS 33K/35K SPROCKETS & ROLLERS

Part Number
SPROCKETS
135-1230 Left
135-1231 Right HEADSHAFT SPROCKET
Part Number Model(s)

DURATOOTH ®

140-703 (9T)
300-0081 (12T)

375-1164 (11T)
1030, 1230, 1330
RT10, RT12, RT16,
RT20, RT24
C12, C14, C16, C16X,
C24X, C30X

Part Number
135-638 Left
135-639 Center
135-637 Right

BOLT-ON SHARK ®

TAIL SPROCKET AND

Part Number ROLLER ASSEMBLY
131-259
Part Number Description

BITS

33K/35K DIGGING SYSTEMS

140-653 12T Tail
Sprocket Assy
140-1099 14T Tail
Sprocket Assy
142-754 Tail Roller
Assembly
140-1104 Greasable Tail
Part Number
Roller Assembly SPLIT HEADSHAFT SPROCKET
140-1289 Low-Profile Sprocket ™,
136-165 Left Sealed
Part Number Model(s)
136-164 Center 140-1290 Low-Profile Sprocket,
Greasable 142-039 (10T) 1820
136-163 Right
140-1424 Spring Boom Tail Sprocket 301-1871 (10T)
Assembly with mud relief

BIT HOLDERS
142-109 (10T) SK3TR, SK4TR, SK5TR,
1TRI, 1TR4, 410SX
140-703 (9T) 1030, 1230, 1330

20 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 21

 1030, 1230, 1330, 1820, C12, C14, C16, C16X, C24X,
C30X, RT10, RT12, RT16, RT20, RT24, SK350, SK500,
3 3 K / 3 5 K D I G G I N G SY S T E M S SK600, SK650, SK750, SK752, SK755, SK800, SK850, ditchwitch.com
SK1050, SK1550, ST37X, R150, R230, R300, XT855,
410SX, 420SX, RT30 (35K ONLY)

33K/35K BOOMS
BOOMS LOW-PROFILE
SPROCKET (LPS™)
• Low-profile teeth on tail
SMALL TAIL SPROCKET BOOM 35K SPRING BOOM roller reduce “seize up”
• Shock-absorbing urethane bushing. • Urethane spring absorbs shocks while trenching. and “flat-spotting” roller.
• Simple, open design reduces buildup • Inner sleeve for easy boom installation/removal. • Lower profile teeth (versus
in sticky soils. • Large tail roller bearing with triple lip seals. traditional sprockets) result
• Features sealed tail and idler sprockets. • Patent-pending boom and sprocket designs. in less chain wear and
• Available in 36" and 48" depths. potential for binding.

STANDARD BOOM
• Proven, rugged design.
• Manual adjustment for chain tensioning.
35K SPRING STANDARD SPLIT GREASABLE
• Available with (greasable or sealed) tail roller or
BOOM BOOM BOOM BOOM
(greasable or sealed) Low-Profile Sprocket™.
Digging Pitch Part Part Part Part
Depth Length Number Number Number Number
24" 52P 140-1205 140-1302 140-1310 –
30" 62P 140-1206 140-1287 140-1311 –
SPLIT BOOM

SEALED
LPS,
36" 68P 140-1207 140-1288 140-1332 –
• Lower cost for value-minded consumer operating
42" 76P – 140-1304 – –
in light to medium conditions.
48" 84P* 140-1397 140-1306 – –
• Manual adjustment for chain tensioning.
• Unique split boom design allows for quick and
24" 52P – 140-1303 140-1101 140-1318
easy installation and removal (reduced
30" 62P – 140-1292 140-1100 140-1319

GREASABLE
“sticking”).

LPS,
36" 68P – 140-1293 140-1328 140-1327
• Available with (greasable or sealed) 42" 76P – 140-1305 – –
tail roller or new (greasable or sealed) Low-Profile 48" 84P* – 140-1307 – –
Sprocket.
18" 44P – 141-775 – –

33K/35K DIGGING SYSTEMS

24" 52P – 141-792 140-1162 141-794
30" 62P – 141-793 140-1163 141-795

SEALED
ROLLER,
GREASABLE BOOM 36" 68P – 141-791 140-1334 141-796
• Similar to our proven standard boom, but with 42" 76P – 140-1240 – –
grease cylinder to tension digging chain. 48" 84P* – 140-531 – –
• Available with sealed roller, greasable roller, or
18" 44P – 140-1110 – –
SMALL TAIL SPROCKET BOOM greasable Low-Profile Sprocket.
24" 52P – 140-1112 140-1122 140-1114

GREASABLE
ROLLER,
30" 62P – 140-1113 140-1123 140-1115
Digging Pitch Part
Depth Length Number 36" 68P – 140-1111 140-1333 140-1116
36" 68P 140-060 48" 84P* – 140-1106 – –
48" 84P* 140-060
140-551 * XT855 requires 90P of chain for 48" depth.
Boom Extension

22 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 23

 5 0 K D I G G I N G SY S T E M S 3610, RT36, 3700, RT40, RT45, RT55, TR50, XT1600 ditchwitch.com

50K CHAINS
BARE CHAINS
2 PITCH

PUTTING POWER Pitch Length

12 138-217
16 138-219
Part Number

TO WORK.
24 138-216
54 138-228
64 131-135
68 138-218
72 138-215
84 135-1532
ANTI-BACKFLEX
2 PITCH
96 135-1533

Pitch Length Part Number

4 PITCH 68 139-218
72 139-215
Pitch Length Part Number
12 138-210
16 138-211
24 138-212
64 131-136
68 138-213
72 138-214

ALTERNATING SIDE BARS

50K DIGGING SYSTEMS

BARE DURATOOTH® CHAIN ASSEMBLY
CHAIN
Pitch Length Part Number
Pitch Length Part Number C2X
Ditch Witch trenchers and compact utility equipment lead the industry in productivity, not because of their
®
12 138-279 5" 6" 5" 6"
power, but because of how their power is directed to the business end of the machine. No underground construction 16 138-278 68 133-282
equipment manufacturer better understands the connection between power and performance, and more effectively 24 138-280 112 133-299 135-1311 135-1308
applies that understanding. 72 138-281 168 135-1301

24 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 25

 5 0 K D I G G I N G SY S T E M S 3610, RT36, 3700, RT40, RT45, RT55, TR50, XT1600 ditchwitch.com

C2X
50K CHAINS
DURATOOTH ®

2 PITCH
Pitch Length Part Number
5" 6" 8" 10" 12" 16"
54 135-1261 135-1262 135-1263
2 PITCH 64 135-1264 135-1265 135-1266
68 135-1319 135-1305 135-1252 135-1253 135-1254
Pitch Length Part Number
72 135-1320 135-1302 135-1251
5" 6" 8" 10" 12" 16"
80 135-1335 135-1344 135-1255 135-1256 135-1257
54 131-115 131-116 131-117
84 135-1333 135-1321 135-1258 135-1259 135-1260
64 131-137 131-138
88 135-1326 135-1306
68 133-322 133-293 131-009
131-010 131-011
92 135-1336 135-1337
72 133-324 133-290 131-008
94 135-1327
80 133-358 133-359 131-012
131-013 131-014
96 135-1303
84 133-356 133-325 131-015
131-016 131-017
100 135-1328 135-1279
88 133-330 133-294
108 135-1329 135-1304
92 133-360 133-361
112 135-1346 135-1307
96 133-331 133-291
116 135-1338
100 133-332 133-224
120 135-1331
108 133-333 133-292
144 135-1341
112 133-391 133-295
116 133-364
120 133-268 C2X
4 PITCH
Pitch Length Part Number
5" 6" 8" 10" 12" 16"
64 135-1268 135-1269 135-1270
4 PITCH 68 135-1281 135-1282 135-1283 135-1285 135-1284
72 135-1286 135-1299 135-1287
Pitch Length Part Number 75 135-1314
5" 6" 8" 10" 12" 16" 80 135-1288 135-1289 135-1290 135-1291
64 131-142 131-143 84 135-1334 135-1322 135-1323 135-1324 135-1325
68 133-234 133-235 88 135-1309 135-1310
72 133-240 133-267 92 135-1295 135-1296

50K DIGGING SYSTEMS

75 133-315 96 135-1315 135-1292 135-1293 135-1294
80 133-245 133-246 133-247 133-249 100 135-1280
84 133-357 133-326 133-327 133-328 133-329 108 135-1297 135-1298
88 133-301 133-303 112 135-1312 135-1313
92 133-255 133-256 116 135-1340
96 133-317 133-250 133-251 133-252 124 135-1317 135-1318
100 133-318 144 135-1342
108 133-259 133-260 133-267
112 133-309 133-310
116 133-365
124 133-319
144 133-367

26 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 27

 5 0 K D I G G I N G SY S T E M S 3610, RT36, 3700, RT40, RT45, RT55, TR50, XT1600 ditchwitch.com

50K CHAINS
COMBOS WELD-ONS
SHARK®/DURATOOTH®
Pitch Length Part Number SHARK® II
6" 12"
60 135-1483 Pitch Length Part Number
64 131-140 6"
ALLIGATOR
68 131-415 54 131-175
80 131-412 Pitch Length Part Number 68 131-171
84 131-413 6" 80 131-172
96 131-416 80 131-050 84 131-173
84 131-096 96 131-174
96 131-097
SHARK/DURATOOTH C2X
Pitch Length Part Number
6"

BOLT-ONS
64 135-1267
68 135-1277
80 135-1275
84 135-1276
96 135-1278

SHARK
ALLIGATOR/DURATOOTH Pitch Length Part Number
5"
Pitch Length Part Number 68 132-302
6"
72 132-301
80 131-404 ALLIGATOR 84 132-303
84 131-405

50K DIGGING SYSTEMS

96 131-408 Pitch Length Part Number
5" 6"
68 135-336 131-407
72 135-335
ALLIGATOR/DURATOOTH C2X 84 135-337
96 138-225
Pitch Length Part Number Part Number Description
6" 131-131 Repair Station
68 135-1273 135-1067 Chain Pin

REPAIR STATIONS
80 135-1271 135-1086 Lock Key
84 135-1272 131-184 Shark II
96 135-1274 135-1149 Premium
138-203 Roller Link

28 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 29

 5 0 K D I G G I N G SY S T E M S 3610, RT36, 3700, RT40, RT45, RT55, TR50, XT1600 ditchwitch.com

50K CHAINS 50K TEETH & BITS

TOOTH ADAPTERS DURATOOTH

®

Part Number Size

135-912 8" width
DURATOOTH DURATOOTH C2X
135-950 10" width
135-913 12" width Part Number Part Number
135-914 16" width 135-1233 135-1234
Left Left
135-1236 135-1237
Right Right

Part Number
136-236
Left inline

AUGERS
136-237
Right inline
136-239

50K DIGGING SYSTEMS

Left outside
136-238
Right outside
Part Number Description
136-240
145-071 Left Long Auger Left wide
145-070 Right Long Auger 136-241
145-110 Left Short Auger Right wide
145-109 Right Short Auger

BOLT-ON SHARK TEETH

®

30 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 31

 5 0 K D I G G I N G SY S T E M S 3610, RT36, 3700, RT40, RT45, RT55, TR50, XT1600 ditchwitch.com

50K TEETH & BITS 50K SPROCKETS & ROLLERS

BOLT-ON BIT ADAPTERS SPROCKETS

Part Number Part Number Description
136-036 142-005 10T Split Headshaft Sprocket
Left inline 142-029 12T Headshaft Sprocket
136-037 142-030 14T Headshaft Sprocket
Right inline
142-044 14T Split Headshaft Sprocket
136-039
Left outside 142-127 12T Split Headshaft Sprocket
136-038 142-031 14T Auger Sprocket
Right outside
136-040
Left wide
136-041
Right wide

INSERT BITS

50K DIGGING SYSTEMS

TAIL ROLLERS
Part Number Description
140-1398 Low Profile Tail Sprocket
Part Number Description Assembly (Sealed) - TR50
136-100 Cap Bit 142-751 Tail Roller Assembly
136-101 Insert Bit
136-102 Insert Bit

32 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 33

 5 0 K D I G G I N G SY S T E M S 3610, RT36, 3700, RT40, RT45, RT55, TR50, XT1600 ditchwitch.com

50K BOOMS
BOOMS SMALL TAIL SPROCKET STANDARD BOOM
Digging Depth Pitch Length Part Number
36" 80P 140-124
RT55 33" 82P ON
H516 & H553
48" 96P 140-125
RT55 46" 98P ON
H516 & H553
60" 108P 140-330
RT55 58" 110P ON
H516 & H553

TR50 FOOTINGS UNIT BOOM

Digging Depth Pitch Length Part Number
24" 54P 140-1409
30" 60P 140-1410
36" 68P 140-1411

LARGE TAIL ROLLER BOOM

50K DIGGING SYSTEMS

GREASE TENSION
Digging Depth Pitch Length Part Number
36" 80P 143-181
42" 84P 143-050, H314,
H350, H516, H553
48" 84P 143-180
52" 96P 143-060, H314, SMALL TAIL SPROCKET WEAR BAR BOOM
H350, H516, H553
Digging Depth Pitch Length Part Number
44" 72P 140-616
60.5" 88P 140-622

34 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 35

 RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95,
70 K D I G G I N G SY S T E M S RT100, RT105, RT115, RT115 QUAD, HT115, RT120,
RT120 QUAD, RT125, RT125 QUAD
ditchwitch.com

70K CHAINS

BARE CHAINS
EVERY PART MATTERS.
EVERY TIME.
ANTI-BACKFLEX
2 PITCH
Pitch Length Part Number
8 139-701
16 139-702
52 139-703
62 139-704

4 PITCH
Pitch Length Part Number
8 138-509
16 138-510
52 138-512
62 138-511

70K DIGGING SYSTEMS

2 PITCH
Pitch Length Part Number
8 138-701
16 138-702
We can guarantee the superior quality and performance of our parts because we design, test and
52 138-703
manufacture each part to provide optimal performance with its compatible equipment. We’re the only 62 138-704
underground construction equipment manufacturer that does this. Why? Because when you’re on site trying
to finish a job, there is no such thing as an unimportant part.

36 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 37

 RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95,
70 K D I G G I N G SY S T E M S RT100, RT105, RT115, RT115 QUAD, HT115, RT120,
RT120 QUAD, RT125, RT125 QUAD
ditchwitch.com

70K CHAINS
DURATOOTH ®

BOLT-ON ALLIGATOR

2 PITCH 4 PITCH
Pitch Length Part Number Pitch Length Part Number
C2X C2X
6" 10" 6" 10" 6" 8" 6" 8"
62 133-726 133-728 135-1380 135-1381 62 133-534 133-535 135-1374 135-1375
68 133-787 135-1382 70 133-544 135-1376 ALLIGATOR®
76 133-790 135-1383 78 133-554 133-555 135-1377 135-1378
78 133-746 94 133-564 135-1379 Pitch Length Part Number
6"
52 135-775
62 135-776
68 135-786
70 135-777

70K DIGGING SYSTEMS

ANTI-BACKFLEX 76 135-789
2 PITCH ALLIGATOR 78 135-778
PREMIUM/ANTI-BACKFLEX 94 135-779
Pitch Length Part Number
C2X Pitch Length Part Number
6" 8" 6" 8" 6"
62 134-726 135-1396 62 137-776
70 134-736 135-1397 70 137-777
78 134-747 135-1398 78 137-778
94 134-756

38 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 39

 RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95,
70 K / 110 K D I G G I N G SY S T E M S RT100, RT105, RT115, RT115 QUAD, HT115, RT120,
RT120 QUAD, RT125, RT125 QUAD
ditchwitch.com

70K CHAINS 110K CHAINS

REPAIR STATIONS BARE CHAINS

2 PITCH
Pitch Length Part Number
4 138-413
PREMIUM/ANTI-BACKFLEX 8 138-412
REPAIR STATION 10 138-414
16 138-410
Part Number 62 138-411
Part Number Description 135-1187 70 135-1534
135-1182 Standard 78 135-1535

MASTER PINS
Part Number Description ANTI-BACKFLEX
135-1145 Chain Pin 2 PITCH
(includes Lock Key)
135-1176 Lock Key Pitch Length Part Number
8 139-412

TOOTH ADAPTERS
16 139-410
62 139-411

70K/110K DIGGING SYSTEMS

Part Number Description
145-071 Left Long
145-070 Right Long
145-110 Left Short K-STYLE
145-109 Right Short
Part Number Size 2 PITCH 4 PITCH
135-912 8" width
135-901 10" width Pitch Length Part Number Pitch Length Part Number
135-902 12" width 8 131-244 8 138-471

AUGERS 135-903
135-904
14" width
16" width
62 131-241
64 131-242
70 131-243
16 138-472
62 138-473

40 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 41

 110 K D I G G I N G SY S T E M S
RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95, RT100,
RT105, RT115, RT115 QUAD, HT115, RT120, RT120 QUAD, ditchwitch.com
RT125, RT125 QUAD

110K CHAINS
DURATOOTH ®
DURATOOTH COMBOS ®

2 PITCH
SHARK®/DURATOOTH
Pitch Length Part Number
7" 8" 10" 12" 15"
Pitch Length Part Number
62 133-420 133-421 133-423
C2X
70 133-459 133-460 133-461 133-462 133-463 6" 6"
78 133-430 133-431 133-433 133-434 62 131-264 135-1351
94 133-440 133-441 66 131-265 135-1352
70 131-266 135-1353
72 131-267 135-1354
C2X 78 131-268 135-1355
2 PITCH
Pitch Length Part Number
7" 8" 10" 12" 15"
62 135-1360 135-1361 135-1362
70 135-1369 135-1370 135-1371 135-1372 135-1373
ALLIGATOR/DURATOOTH
78 135-1363 135-1364 135-1365 135-1366
Pitch Length Part Number
94 135-1367 135-1368
C2X
6" 6"
62 131-269 135-1356
70 131-270 135-1357
72 135-1359
78 131-271 135-1358
ANTI-BACKFLEX
2 PITCH
Pitch Length Part Number
6" 8" 10" 12" 15"

BOLT-ONS
62 134-420 134-421 134-422 134-423

11 0 K D I G G I N G S Y S T E M S
70 134-459 134-460 134-461 134-462 134-464
78 134-430 134-431 134-433

ALLIGATOR
C2X ANTI-BACKFLEX
2 PITCH Pitch Length Part Number
ANTI-BACKFLEX
Pitch Length Part Number 6" 6"
7" 8" 10" 11" 12" 15" 62 135-485 137-485
62 135-1384 135-1385 135-1386 135-1387 70 135-486 137-486
70 135-1391 135-1392 135-1393 135-1394 135-1395 78 135-487 137-487
78 135-1388 135-1389 135-1390 94 135-488 137-488

42 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 43

 110 K D I G G I N G SY S T E M S
RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95, RT100,
RT105, RT115, RT115 QUAD, HT115, RT120, RT120 QUAD, ditchwitch.com
RT125, RT125 QUAD

110K CHAINS
ALLIGATOR ®

WELD-ON ALLIGATOR
REPAIR STATIONS
Pitch Length Part Number
6" 7"
ALLIGATOR K-STYLE
4 135-1510
Pitch Length Part Number 6 135-1511
8" 10" 12" 8 135-1512 135-1513 PREMIUM / ANTIBACKFLEX STANDARD ALLIGATOR
62 131-245 131-249 131-253 62 135-1484 REPAIR STATION REPAIR STATION REPAIR STATIONS
70 131-247 131-251 131-255 64 135-1514
78 131-248 131-252 131-256 70 135-1515 135-1465 Part Number Part Number Description Description Part Number
135-1188 135-1183 K-Style 131-1185
135-1176 Lock Key Alligator 135-1474 (7")
135-1480 Master Pin, Obround

MASTER PINS
135-1146 Master Pin, Round

SHARK II REPAIR STATION ROLLER LINKS

Part Number Description Description Part Number Part Number
135-1146
135-1146 Round Master Pin 135-1490
Shark II 6" 135-1623
135-1480 Obround Master Pin
Shark II 8" 135-1624
135-1480
Replaceable Shark 6" 135-1625
Replaceable Shark 8" 135-1626

SHARK II ®

TOOTH ADAPTERS

11 0 K D I G G I N G S Y S T E M S
SHARK II REPLACEABLE BIT SHARK II Part Number Description
145-071 Left Long Part Number Size
Pitch Length Part Number Pitch Length Part Number
145-070 Right Long 135-901 10" width
6" 8" 6" 8"
145-110 Left Short 135-902 12" width
62 135-1494 135-1497 62 135-1500 135-1501
Requires 52 Bits Requires 67 Bits 145-109 Right Short 135-903 14" width
64 135-1495 135-1498
70 135-1502 135-1503 135-904 16" width
70 135-1496 135-1499

AUGERS
Requires 56 Bits Requires 76 Bits
78 135-1492 135-1493 135-905 18" width
78 135-1504 135-1505
Requires 62 Bits Requires 85 Bits

44 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 45

 RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95,
70 K / 110 K D I G G I N G SY S T E M S RT100, RT105, RT115, RT115 QUAD, HT115, RT120,
RT120 QUAD, RT125, RT125 QUAD
ditchwitch.com

70K/110K TEETH & BITS

DURATOOTH ®

INSERT BITS
ALLIGATOR INSERT BIT
(.765 DIAMETER)
Part Number Description
136-100 Cap Bit
136-101 Insert Bit
136-102 Insert Bit
DURATOOTH DURATOOTH C2X
Part Number Part Number
135-1239 Left 135-1240 Left
135-1242 Right 135-1243 Right

BOLT-ONS

7 0 K / 11 0 K D I G G I N G S Y S T E M S
BIT HOLDER SHARK® TOOTH
Part Number Part Number WELD-ON AND K-STYLE
135-975 136-275 ALLIGATOR INSERT BIT
Left Inside Left Inside (.875 DIAMETER)
135-976
Right Inside
136-276
Right Inside
REPLACEABLE
Part Number Description SHARK® BIT
135-973 136-274 131-290 Cap Bit
Left Outside Left Outside
136-222 Insert Bit Part Number Description
135-974 136-273
Right Outside Right Outside 131-828 Retainer Ring 401-277 Shark Bit

46 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 47

 RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95,
70 K / 110 K D I G G I N G SY S T E M S RT100, RT105, RT115, RT115 QUAD, HT115, RT120,
RT120 QUAD, RT125, RT125 QUAD
ditchwitch.com

70K/110K SPROCKETS
SPROCKETS
IDLER SPROCKET
Part Number Description
140-656 10T
(Includes Bearings)

HEADSHAFT SPROCKET
Part Number Description
140-717 Split 10T
141-589 Split 11T
141-740 Split 12T
142-009 Solid 10T

7 0 K / 11 0 K D I G G I N G S Y S T E M S
AUGER SPROCKET
Part Number Description
140-665 10T

IDLER SPROCKET
Part Number Description
142-038 10T – RT55

48 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 49

 RT55, RT70, RT75, RT80, RT80 QUAD, RT90, RT95,
70 K / 110 K D I G G I N G SY S T E M S RT100, RT105, RT115, RT115 QUAD, HT115, RT120,
RT120 QUAD, RT125, RT125 QUAD
ditchwitch.com

70K/110K BOOMS & ROLLERS

BOOMS AND TAIL ROLLERS BOOMS

TAIL ROLLER
Part Number Description
142-757 19 in. Tail Roller LARGE TAIL ROLLER BOOM
LARGE TAIL ROLLER BOOM WITH WEAR BAR (L/ Bearings) WITH WEAR BAR
129-013 HD Tail Roller
Digging Depth Pitch Length Part Number (L/ Bearings)
Digging Depth Pitch Length Part Number
Tail Roller Boom Heavy Duty Boom 142-756 Tail Roller
(RT80 - L/Bearings) 39" 52 143-120
Boom Boom Tube Boom Boom Tube
52" 62 143-130
48" 62 140-546 140-1128 141-659 140-1176
62" 78 143-375
58" 70 140-547 140-1129 141-658 140-1177
62" 76 140-1225
69" 78 140-548 140-1130 141-660 140-1178

7 0 K / 11 0 K D I G G I N G S Y S T E M S
SMALL TAIL SPROCKET BOOM
LARGE TAIL ROLLER BOOM WITHOUT WEAR BAR
Digging Depth Pitch Length Part Number
Digging Depth Pitch Length Part Number
45" 62 143-205
Boom Boom Tube
52" 68 143-206
48" 62 140-545 140-1128
65" 78 143-207
58" 70 140-545 140-1129
93" 94 143-208
69" 78 140-545 140-1130
52" 68 140-128
90" 94 140-545 140-1131
62" 78 140-331
84" 94 140-1186

50 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 51

 CONVERSION SPROCK ETS ditchwitch.com

Our conversion sprockets (on the following page)

let you use Ditch Witch chain and teeth.
• High-grade steel is selectively heat treated for better wear resistance and shock load absorption.
• Fits and performs to OEM specifications.
• Wide, smooth tooth face profile decreases roller cupping.
• Uniform hard facing distribution.
• Long-life, high-production tooth design.

PROVEN PARTS FOR V E R M E E R C H A I N C O N V E R S I O N C H A RT

POPULAR TRENCHERS. 33K VERMEER 1.654P NO CONVERSION NEEDED

50K VERMEER 2.00P NO CONVERSION NEEDED

IF YOUR VERMEER 3.00P IS 46 52 54 56 60 62 64 70 72 74 80 90

70K/110K THEN YOUR DITCH WITCH 3.110P IS 45 51 53 55 59 61 63 69 71 73 79 89

C A S E C O N V E R S I O N C H A RT

33K

CONVERSION SPROCKETS
CASE 1.654P 28K CHAIN NO CONVERSION NEEDED

50K
IF YOUR CASE 2.609P IS 48 58 68 70 78 88 98
THEN YOUR DITCH WITCH 2.00P IS 63 76 89 92 102 115 128

70K/110K IF YOUR CASE 3.075P IS

THEN YOUR DITCH WITCH 3.110P IS
54 57 61 67 68 79 80 89 107
55 58 62 68 69 80 81 90 108
You don’t have to own a Ditch Witch® trencher to get quality parts and service. Our conversion sprockets
let you fit proven Ditch Witch chain and teeth to more than 70 models from Vermeer®, Case®, Bobcat®, IF YOUR CASE 3.250P IS 55 62 64 70 75 78 84 86 101
and others. You’ll get industry-leading performance on the job and outstanding service you can count on
70K/110K THEN YOUR DITCH WITCH 3.110P IS 59 66 68 75 80 83 90 92 108
at the dealership. Put Ditch Witch expertise and experience to work for you.

52 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 53

 CONVERSION SPROCK ETS ditchwitch.com

V E R M E E R® B O B C AT ® / M I D M A R K ® / B U R K E E N ®

Ditch Witch® Vermeer Ditch Witch® Bobcat/Midmark/Burkeen

Part Number Part Number Description Model(s) Chain Class Part Number Part Number Description Model(s) Chain Class
142-9516 220359-001 (10T) Headshaft Sprocket LM35/LM40/V1150/V1550/V1650/V1850 33K/35K 142-9528 (15T) Headshaft Sprocket 50K
142-9519 205301-001 (10T) Idler Sprocket LM35/LM40/V1150/V1550/V1650/V1850 33K/35K 142-9489 6633361 (9T) Headshaft Sprocket T108/T114/108/140 33K/35K
142-9517 205366-003 (10T) Headshaft Sprocket LM35/LM40/LM42/V1150/V1550/ 33K/35K 142-9514 6633362 (10T) Idler Sprocket Assembly T108/T114/T116/T208/1 33K/35K
V1650/V1850/RT100 08/140/B16
142-9494 210000-001 (14T) Split Headshaft Sprocket 4150/4750/V1650 50K 142-9488 6641230 (10T) Headshaft Sprocket T116/T208/B16 33K/35K
142-9431 203593-001 (12T) Auger Sprocket 4150/4750/V1650 50K 142-9487 6654134 Split Headshaft Sprocket T208/T116/B16 33K/35K
142-9531 (17T) Headshaft Sprocket RTX450 (High Headshaft) 50K 142-9492 6634446 (12T) Split Headshaft Sprocket T135/T136/250/321/332/ 33K/35K
142-9404 16588-003 (12T) Split Headshaft Sprocket V430A/V16A/V3550 50K B35/B36

142-9499 242742001 (15T) Headshaft Sprocket V3550/V3550A/RT450 Low Headshaft 50K 142-9491 458166 (12T) Split Headshaft Sprocket T135/T136/250/321/332/ 33K/35K
(One Piece Drive Sprocket) B35/B36

142-9500 203601-001 (12T) Split Headshaft Sprocket RT350 50K 142-9497 6959090 (14T) Headshaft Sprocket 33K/35K

142-9533 (11T) Headshaft Sprocket 70K/110K 142-9483 6700779 (14T) Headshaft Sprocket 3022/3023/B35/B36 50K

142-9426 204052-001 (10T) Split Headshaft Sprocket 4150/4750/5750/RTX550 70K/110K 142-9413 (13T) Headshaft Sprocket LT303 50K

142-9433 47896-001 (9T) Auger Sprocket and Shaft M475/M485/M455/M455A/M465/V454/V470 70K/110K 142-9480 (14T) Auger Sprocket 50K

142-9420 39022-001 (9T) Idler Sprocket (1.25" Shaft) V434/D16 70K/110K 142-9525 (14T) Tail Sprocket 50K

142-9428 19910-001/40233-001 (12T) Split Headshaft Sprocket V450/D16/VH18/M475/M485/M455/ 70K/110K 142-9526 (14T) Tail Sprocket 50K
M455A/M465/V454/V70
142-9427 204039-001 (8T) Auger Sprocket and Shaft V450/D16/VH18/4150/4750/5750 70K/110K BARRETO
142-9422 212EE (7T) Idler Sprocket M30/M437A 70K/110K
Ditch Witch Barreto
142-9416 201593-001 (15T) Headshaft Sprocket 7550/8050/VH1580 70K/110K Part Number Part Number Description Model(s) Chain Class
142-9418 206170-001 (12T) Auger Sprocket and Shaft V450/D16/VH18/7550/8050/VH1580 70K/110K
142-9504 02710B (10T) Headshaft Sprocket 712/912/1324/1424/1624/1824/ 33K/35K
142-9400 296317080 (15T) Headshaft Sprocket RTX750,TR750, SO750 70K/110K 2024/2324
142-9401 29306796/15915-003 (10T) Headshaft Sprocket 70K/110K
142-9414 (9T) Idler Sprocket M475/M485/M455/M455A/M465/ V454/V470 70K/110K

CONVERSION SPROCKETS
142-9501 264824-001 (10T) Headshaft Sprocket RT650 70K/110K
142-9502 296306796 11(T) Headshaft Sprocket RTX750/P1750 70K/110K
142-9503 296288169 (15T) Headshaft Sprocket V8550/V8550A/VH1850/SO1850/ 70K/110K
PT8550/V120/TR120/RT950/
RT1250/RTX1250/XTS1250

54 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 55

 CONVERSION SPROCK ETS ditchwitch.com

C A S E ®/ A S T E C ®/ T O R O ®

Ditch Witch® OEM Ditch Witch® OEM

Part Number Part Number Description Model(s) Chain Class Part Number Part Number Description Model(s) Chain Class
142-9507 H132761 (8T) Idler Sprocket DH4/DH4B/DH5/DH7/70+4/TF1000 70K/110K
142-9513 H033563 (10T) Idler Sprocket 7+2/10+2/12+2/12+4/14+4/16+4/ 33K/35K
18+4/20+4/25+4/25+4XP/TF300/TL60/ 142-9508 H375881 (8T) Auger Sprocket (2' BORE) DH4/DH4B/DH5 70K/110K
TL70/TL100/TL120/Maxi Sneaker 142-9448 H037168 (10T) Split Headshaft Sprocket DH7/70+4/TF1000 70K/110K
142-9510 H404004/H207688 (10T) Headshaft Sprocket 7+2/10+2/12+2/TL60/TL70/TL100/TL120 33K/35K 142-9496 H212811 (9T) Split Headshaft Sprocket DH4/DH4B/DH5 70K/110K
142-9514 H503664 (10T) Idler Sprocket Assembly 7+2/10+2/12+2/12+4/14+4/16+4/ 33K/35K 142-9511 H099226 (8T) Auger Sprocket (2 1/8" BORE) DH7/70+4/TF1000 70K/110K
18+4/20+4/25+4/25+4XP/TF300/TL60/
142-9468 122432A1 (19T) Split Headshaft Sprocket 460 Direct Drive 70K/110K
TL70/TL100/TL120/Maxi Sneaker
with 4.25" Bolt Circle
142-9437 H068494 (11T) Auger Sprocket 12+4/14+4/16+4/18+4/20+4/25+4/ 33K/35K
142-9518 H438347 (13T) Split Headshaft Sprocket 660/760/860/960 70K/110K
25+4XP/TF300/Maxi Sneaker
(9/16" Bolt Holes)
142-9509 H069773 (10T) Split Headshaft Sprocket 12+4/14+4/16+4/18+4/20+4/25+4/ 33K/35K
142-9461 H433851 (13T) Tail Sprocket (1/2" Bolt Holes) 660/760/860/960 70K/110K
25+4XP/TF300/Maxi Sneaker
142-9506 H433989 (8T) Idler Sprocket 660/760/860/960 70K/110K
142-9529 99-4330/100-1699 (12T) Headshaft Sprocket (2 holes) TRX Attachment 22447 33K/35K
142-9454 H433352 (10T) Auger Sprocket 760 70K/110K
142-9532 104-1964 (12T) Headshaft Sprocket 6 holes 1/2" TRX Attachments 33K/35K
22465/TX413 142-9463 H434598 (11T) Auger Sprocket 660/860 70K/110K
22470 High Torque 142-9512 186252A1 (13T) Auger Sprocket 660/760/860/960 70K/110K
22471 High Speed (for use with Large Tail Roller Boom)
142-9495 H148569 (12T) Headshaft Sprocket 25+4/25+4XP/30+4/360/40+4/TF600/TF700/ 50K 142-9455 H434598 (13T) Tail Sprocket 760 70K/110K
DH4//DH4B/DH5 (1/2" Bolt Holes)
142-9515 H115683 (9T) Idler Sprocket 25+4/25+4XP/30+4/360/40+4/TF600/ 50K 142-9457 H433264 (13T) Split Headshaft Sprocket 760 70K/110K
TF700/DH4//DH4B/DH5 142-9458 H438347 (13T) Split Headshaft Sprocket 760 70K/110K
142-9467 126170A1 (18T) Auger Sprocket 460/560 50K
142-9473 130418A1 (18T) Split Headshaft Sprocket 560 Direct Drive 50K
142-9465 104152A1 (19T) Split Headshaft Sprocket 460/560 Planetary 50K
with 7.7" Bolt Circle
142-9470 139796A1 (17T) Tail Sprocket 460/560 50K

CONVERSION SPROCKETS
142-9472 139794A1 (12T) Idler Sprocket 460/560 50K
142-9445 H375899 (14T) Auger Sprocket 25+4/25+4XP/30+4/360/40+4/TF600/TF700/ 50K
DH4/DH4B/DH5
142-9520 H531251 (9T) Idler Sprocket 25+4/25+4XP/30+4/360/40+4/TF600/TF700/ 50K
DH4/DH4B/DH5

56 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 57

 PLOW BL ADES & ACCESSORIES ditchwitch.com

ADJUSTABLE FEED BLADES

Part Number Cover Depth Feed Width Radius Model(s)
185-1010 12-18" .75" 3.0" 420SX
185-1011 18-24" .75" 3.0" 420SX
185-596 12-18" 1.0" 3.0" 420SX
185-597 18-24" 1.0" 3.0" 420SX
187-028 10-16" .75" .50" 420SX
186-913 12-24" .50" 3.0" RT45, SK7VP, 410SX
(Fixed Chute
Adjustable Blade)
185-397 24-30" .75" 3.0" RT55
185-398 18-24" .75" 3.0" RT55
185-399 24-30" 1.0" 10" RT55
185-400 18-24" 1.0" 10" RT55
185-421 24-30" 1.5" 6.5" RT55
185-422 18-24" 1.0" 6.5" RT55
185-423 24-30" 2.0" 8.0" RT55
185-424 18-24" 2.0" 8.0" RT55
185-305 22-30" 1.0" 9.0" RT80Q, RT95H, RT105, RT115H,
RT115Q, HT115, RT125, RT125Q
185-306 22-30" 1.0" 9.0" RT80Q, RT95H, RT105, RT115H,
with toe RT115Q, HT115, RT125, RT125Q
185-311 22-30" 1.5" 9.0" RT80Q, RT95H, RT105, RT115H,
RT115Q, HT115, RT125, RT125Q
185-310 22-30" 1.5" 9.0" RT80Q, RT95H, RT105, RT115H,
with toe RT115Q, HT115, RT125, RT125Q
185-316 22-30" 2.0" 10" RT80Q, RT95H, RT105, RT115H,

GET THE MOST OUT OF

RT115Q, HT115, RT125, RT125Q
185-315 22-30" 2.0" 10" RT80Q, RT95H, RT105, RT115H,
with toe RT115Q, HT115, RT125, RT125Q
185-283 28-36" 1.5" 7.5" RT80Q, RT95H, RT105, RT115H,

PLOW BLADES & ACCESSORIES

RT115Q, HT115, RT125, RT125Q

YOUR MACHINE.
185-281 28-36" 1.5" 7.5" RT80Q, RT95H, RT105, RT115H,
with toe RT115Q, HT115, RT125, RT125Q
185-285 28-36" 2.0" 10" RT80Q, RT95H, RT105, RT115H,
RT115Q, HT115, RT125, RT125Q
185-284 28-36" 2.0" 10" RT80Q, RT95H, RT105, RT115H,
with toe RT115Q, HT115, RT125, RT125Q
185-1081 28-36" 2.0" 10" RT80Q, RT95H, RT105, RT115H,
RT115Q, HT115, RT115Q, RT120Q
RT125, RT125Q
185-1091 28-36" 1.5" 7.5" RT80Q, RT95H, RT105, RT115H,
RT115Q, HT115, RT115Q, RT120Q
RT125, RT125Q
185-1103 34-42" 1.5" 7.5" RT105, RT115Q, RT120Q,
Only Ditch Witch® plow blades deliver the performance you demand from your Ditch Witch vibratory plow or RT125, RT125Q
185-1110 34-42" 2.0" 10" RT105, RT115Q, RT120Q,
vibratory plow attachment. Many types of blades are available for different soils and types of utility installation, RT125, RT125Q
plus accessories such as silt fence installers and sod cutters to expand your machine’s capabilities.

58 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 59

 PLOW BL ADES & ACCESSORIES ditchwitch.com

HYDRAULICALLY ADJUSTABLE SPEED BLADES

Part Number Cover Depth Feed Width Radius Model(s) Part Number Cover Depth Blade Thickness Bullet Diameter Model(s)
185-501 23-40" 2.0" 10" HT115 185-1030 12-18" .50" 1.5" 420SX
185-549 23-40" 3.0" 14" HT115 185-1057 12" .50" 1.5" RT45, SK5VP, SK7VP
185-582 26-48" 2.0" 10" HT115 185-1058 18" .50" 1.5" SK5VP, R230, R300
185-574 26-48" 3.0" 14" HT115 186-810 12" .375" 2" RT45, SK5VP, SK7VP,
410SX, R230, R300
186-811 18" .375" 2" 410SX

FEED BLADES PULL BLADES

Part Number Cover Depth Feed Width Radius Model(s) Part Number Cover Depth Blade Thickness Bullet Diameter Model(s)
185-960 12" .75" 3.0" 420SX 185-1021 12" .50" 1.5" 420SX
185-202 9.5" .75" 3.1" SK5VP 185-1022 12" .50" 2.0" 420SX
186-463 12" .75" 7.5" SK5VP, R230, R300 186-424 12" .375" 1.5" RT45, SK5VP, SK7VP,
410SX, R230, R300
186-455 12" .75" 3.0" RT45, SK5VP, SK7VP,
410SX, R230, R300 186-336 12" .375" 3.0" RT45, SK5VP, SK7VP,
410SX, R230, R300
186-507 18" .75" 3.0" RT45, SK7VP, 410SX
186-425 18" .375" 1.5" RT45, SK7VP, 410SX
186-521 24" .75" 3.0" RT45, SK7VP, 410SX
186-337 18" .375" 3.0" RT45, SK7VP, 410SX
186-528 18" 1.0" 10" RT45, SK7VP, 410SX
186-196 24" .75" .75" RT45, SK7VP, 410SX
186-754 12" .375" 1.0" 100SXH
186-435 12" .375" .143" 100SXH
186-757 12" .50" 1.0" 100SXH
185-425 24-30" .75" 3.0" RT55
185-334 30" 1.0" 7.375" RT80Q, RT95H, RT100,

PLOW BLADES & ACCESSORIES

with toe RT105, RT115H, RT115Q, 185-426 18-24" .75" 3.0" RT55
HT115, RT120, RT120Q, 185-427 24-30" .75" - RT55
RT125, RT125Q
185-356 22-30" 1.0" 3.0" RT80Q, RT95H, RT100,
185-333 30" 1.5" 6.625" RT80Q, RT95H, RT100, RT105, RT115H, RT115Q,
with toe RT105, RT115H, RT115Q, RT120, RT120Q, HT115,
HT115, RT120, RT120Q, RT125, RT125Q
RT125, RT125Q
185-345 24 in 1.0 in 3.0 in RT80Q, RT95H, RT100,
185-332 30" 2.0" 10" RT80Q, RT95H, RT100, RT105, RT115H, RT115Q,
with toe RT105, RT115H, RT115Q, RT120, RT120Q, HT115,
HT115, RT120, RT120Q, RT125, RT125Q
RT125, RT125Q
185-357 28-36 in 1.0 in 3.0 in RT80Q, RT95H, RT100,
185-335 36" 1.5" 6.625" RT80Q, RT95H, RT100, RT105, RT115H, RT115Q,
with toe RT105, RT115H, RT115Q, RT120, RT120Q, HT115,
HT115, RT120, RT120Q, RT125, RT125Q
RT125, RT125Q
185-329 36" 2.0" 6.625" RT80Q, RT95H, RT100,
with toe RT105, RT115H, RT115Q,
HT115, RT120, RT120Q,
RT125, RT125Q

60 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 61

 PLOW BL ADES & ACCESSORIES ditchwitch.com

FLOAT BLADES DOUBLE DISK PLOW BLADES

Part Number Cover Depth Feed Width Model(s) Part Number Cover Depth Feed Width Radius Model(s)
186-192 12" 1.0" RT45, SK7VP 185-1073 6" .50" 2.0" RT45, SK5VP, SK7VP,
186-194 18" 1.0" RT45, SK7VP, 410SX 410SX, R230, R300
186-195 18" 1.25" RT45, SK7VP, 410SX
186-197 24" 1.0" RT45, SK7VP, 410SX KEY FEATURES/BENEFITS
186-198 24" 1.25" RT45, SK7VP • Patented solution for shallow installations in high traffic areas like fiber-to-the-
home work and telephone and cable drops.
• Installs product 0.5" (13 mm) diameter x 6" (150 mm) deep x 2" (50 mm)

CHUTE ASSEMBLIES
bend radius.
• Less damage to establish turf than traditional plow blades.
• Requires less drawbar than traditional blades.

Part Number Cover Depth Feed Width Radius Model(s)

186-480 12" .375" 1.5" RT45, SK7VP
186-485 12" .75" 3.0" RT45, SK5VP, SK7VP

HD PLOW BLADES
186-536 18" .375" 1.5" RT45, SK7VP
186-551 18" 1.0" 10" RT45, SK7VP
186-563 24" 1.0" 10" RT45, SK7VP

Part Number Cover Depth Feed Width Radius Model(s)

185-1131 34-42" 1.5" 7.5" RT115Q, RT120Q,
RT125, RT125Q

SILT FENCE BLADES 185-1132 34-42" 2.0"

185-1133* 34-42"

2.0"
10"

15"
RT115Q, RT120Q,
RT125, RT125Q
RT115Q, RT120Q,
RT125, RT125Q
* hinged blade and ribbon chute

PLOW BLADES & ACCESSORIES

Part Number Cover Depth Blade Thickness Model(s)
185-1079 7" .375" SK5VP, 1VP4
KEY FEATURES/BENEFITS
• Engineered to last twice as long as other blades on the market. Its durable
design and heavy-duty components will increase your productivity on every job.
Part Number Description • Replaceable leading edges are located on the front of the blade where most
185-1124 Point wear normally occurs. This feature prolongs the life of the blade and eliminates

HD BLADE WEAR PARTS

185-1125 Flex Pin the labor associated with hardsurfacing.
185-1126 Lower Guard • Blade options to fit your needs include both a feed blade or a pull blade.
185-1127 Upper Guard No matter the job, we've got a blade for you.
185-1128 Pin • Innovative hinged design is an optional feature designed to reduce drag
185-1129 Retainer and wear, while improving turn radius and overall performance.
190-2637 Replaceable Edge Kit*
• Designed for the toughest jobs, this blade excels in rocky, sandy and
extememely abrasive conditions.

* Kit includes all the above items.

62 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 63

 PLOW BL ADES & ACCESSORIES ditchwitch.com

SOD CUTTER KITS REEL CARRIERS

Part Number Model(s) Part Number Model(s)
190-1227 R230, R300 190-1225 R230, R300
190-084 410SX 100-026 100SXH
190-1075 420SX 190-512 410SX
190-1468 420SX
Heavy Duty

SKID SHOE CONVERSION KITS

Part Number
190-220
Model(s)
R230, R300, SK5VP
190-213 410SX
PULLING GRIPS
190-212 420SX
Part Number Size
185-901 3.8" to ½"
185-902 ½" to ¾"
185-903 ¾" to 1¼"

PLOW BLADES & ACCESSORIES

185-904 1¼" to 2"
185-906 2" to 2¾"
185-907 2¾" to 3½"
185-913 3½" to 4¼"
185-914 4¼" to 4¾"
110-289 Anchor Shackle

64 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 65

 E A R T H S AW ditchwitch.com

SAW SEGMENT KITS

COMPACT, POWERFUL Part Number
190-1310
Trench Width
2.5"
Saw Type
H342 18"
Bit Quantity
36
Cutting Pattern Compatible Model(s)
Chevron RT40, RT45

PERFORMANCE.
Centerline
100-861 8" H942 30" 60 Chevron RT95, RT115, HT115
Centerline
100-054 4.5" H1140 40" 80 Chevron RT95, RT115,
Centerline RT115 QUAD, HT115
100-866 6" H1140 40" 80 Chevron RT95, RT115,
Centerline RT115 QUAD, HT115
100-862 8" H1140 40" 80 Chevron RT95, RT115,
Centerline RT115 QUAD, HT115

INSERT BITS
Part Number Description Compatible Model(s)
136-101 Insert Bit RT40, RT45
136-222 Insert Bit RT55, RT95, RT115,
RT115 QUAD, HT115
131-290 Insert Bit RT55, RT95, RT115,
RT115 QUAD, HT115
136-102 Heavy Duty Insert Bit RT40, RT45
136-100 Cap Bit RT40, RT45
259-001 Bit Puller - Hammer RT45, RT55, RT80,
RT105, RT125, RT125Q
259-002 Bit Puller - Slide Hammer RT45, RT55, RT80, RT105
RT125, RT125Q

WEAR BAR KITS

E A R T H S AW
Part Number Compatible Models
100-085 RT95, RT115,
RT115 QUAD, HT115

Ditch Witch® earth saws are designed with a unique drive that minimizes the size of the wheel, resulting in a
more powerful, compact package that slices through earth, asphalt, concrete, and rock. Our compact utility
saw attachment can cut on centerline or offset to the right of the unit, depending on what you need.

66 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 67

 MICROTRENCHING ditchwitch.com

INSTALL FIBER-OPTICS HIGH SPEED SAW BLADES

AT LIGHTNING SPEED. (FOR USE WITH HIGH SPEED SAW MOTOR ONLY)
Part Number Description Maximum Depth Width Type Model

135-1609 PCD Diamond Blade (32" x .375") 12" (30 cm) 0.375" (9.5 mm) PCD MT12
135-1447 PCD Diamond Blade (32" x .500") 12" (30 cm) 0.50" (13 mm) PCD MT12
135-1481 PCD Diamond Blade (32" x .750") 12" (30 cm) 0.75" (19 mm) PCD MT12
135-1612 PCD Diamond Blade (32" x 1.00") 12" (30 cm) 1.00" (25 mm) PCD MT12
135-1610* Concrete Blade (32" x .375") 12" (30 cm) 0.375" (9.5 mm) Concrete MT12

135-1611* Concrete Blade (32" x .500") 12" (30 cm) 0.5" (13 mm) Concrete MT12
135-1485* Concrete Blade (32" x .750") 12" (30 cm) 0.75" (19 mm) Concrete MT12
135-1516* Concrete Blade (32" x 1.024") 12" (30 cm) 1.024" (26 mm) Concrete MT12
* requires 190-2330 bb12 water kit.

M IC R OT RE NC H E R B LA DE & B IT S
301-1447 135-1516

Only Ditch Witch® digging components are designed and specifically

Ditch Witch® offers highly cost-effective solutions for installing fiber-optic cable along paved rights-of-way. manufactured to work together as a system for optimal performance.
These machines deliver maximum speed and efficiency, cleanly slicing through asphalt to create the ideal trench.

68 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 69

 MICROTRENCHING MT9, MT12, MT16 (RT45, RT55, RT80) ditchwitch.com

STANDARD SAW BLADES

Part Number
(FOR USE WITH STANDARD SAW MOTOR ONLY)

Description Maximum Depth Width Type Model

PARTS AND ACCESSORIES
301-1096 Saw Blade (.75", Shark, 24T) 12" (30 cm) 0.75" (19 mm) Shark MT12
301-1590 Saw Blade (.75", Combo, 24T/8T) 12" (30 cm) 0.75" (19 mm) Combo MT12
Part Number Description
301-0580 Saw Blade (.95", Conical, 32T) 12" (30 cm) 0.95" (24 mm) Conical MT12
135-1211 M10 Carbide Full Cap Bit (for use with conical and combo blades)
301-0686 Saw Blade (1.25", Conical, 32T) 12" (30 cm) 1.25" (32 mm) Conical MT12
105-1541 Roll Pin (5 mm x 16 mm) for use with 135-1211 conical bit
302-2276 Saw Blade (1.5", Conical, 32T) 12" (30 cm) 1.5" (38 mm) Conical MT12
190-2330 bb12 Water Kit
135-5008 Fiberblade (26" x .500") 9" (23 cm) 0.50" (13 mm) PDC MT9
302-4844 PDC Segment (1.5")
135-5009 Fiberblade (26" x .750") 9" (23 cm) 0.75" (19 mm) PDC MT9
105-2303 Spiral Pin (2 per 302-4844 segment)
135-5010 Fiberblade (26" x 1.00") 9" (23 cm) 1.00" (25 mm) PDC MT9
135-5007 Fiberblade (26" x 1.50") 9" (23 cm) 1.50" (38 mm) PDC MT9
135-5000 Fiberblade (34" x .500") 12" (30 cm) 0.50" (13 mm) PDC MT12
135-5001 Fiberblade (34" x .750") 12" (30 cm) 0.75" (19 mm) PDC MT12
135-5005 Fiberblade (34" x 1.00") 12" (30 cm) 1.00" (25 mm) PDC MT12
135-5006 Fiberblade (34" x 1.50") 12" (30 cm) 1.50" (38 mm) PDC MT12
135-5011 Fiberblade (43" x .500") 16" (41 cm) 0.50" (13 mm) PDC MT16
135-5012 Fiberblade (43" x .750") 16" (41 cm) 0.75" (19 mm) PDC MT16
135-5013 Fiberblade (43" x 1.00") 16" (41 cm) 1.00" (25 mm) PDC MT16
135-5014 Fiberblade (43" x 1.50") 16" (41 cm) 1.50" (38 mm) PDC MT16
* 135-5007 takes 14 302-4844 to rebuild. 135-5006 takes 20 302-4844 to rebuild. 135-5014 takes 25 302-4844 to rebuild.

301-1096

105-1541

M IC R OT RE NC H E R B LA DE & B IT S
135-1211

301-0580 301-1590

70 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 71

 R O T O W I T C H® ditchwitch.com

CONNECTOR SHAFTS
Part Number Description Style
167-035 Coupler Threaded
351-266 Pin Threaded Slip Latch
To Threaded
351-236 Coupler Slip Latch
351-267 Coupler Slip Latch Threaded
To Slip Latch

DRILL STEMS
Part Number Description Style
351-096 10' Drill Pipe Section Threaded

Part Number Description Style

351-030 All Thread For Above Threaded

SIMPLIFY YOUR Part Number

351-255
351-256
Description
5' Stem Section
10' Stem Section
Style
Slip Latch
Slip Latch

SHORT BORES.

ROTO WITCH®
DRILL STEM GUIDE ASSEMBLY
The Ditch Witch® Roto Witch® attachment is used for short bores underneath sidewalks, driveways and other Part Number
obstacles. It offers great digging performance while minimizing jobsite restoration. Compatible with numerous 118-097
Ditch Witch machines, the Roto Witch attachment can bore and backream up to 12" (300 mm) in diameter.

72 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 73

 R O T O W I T C H® ditchwitch.com

BITS PIPE PULLING ADAPTERS

FISH TAIL BIT
Part Number Style
351-026 Threaded

Part Number Size

PULLING GRIPS
354-046 1" NPT
354-047 1½" NPT
354-048 2" NPT
354-049 2½" NPT
354-050 3" NPT
Part Number Size
354-051 4" NPT
185-901 3.8" to ½"
354-052 6" NPT
185-902 ½" to ¾"
185-903 ¾" to 1¼"
COMPACTION BIT 185-904 1¼" to 2"
185-906 2" to 2¾"
Part Number Cut Style 185-907 2¾" to 3½"
351-136 1.50" Slip Latch 185-913 3½" to 4¼"
351-138 1.75" Slip Latch 185-914 4¼" to 4¾"
351-140 2.00" Slip Latch 110-289 Anchor Shackle
351-142 2.25" Slip Latch

FROST AUGERS Part Number

351-331

351-332
Cut
1.5"

3.0"
Style
Slip Latch

Slip Latch
1.5" & 2"
Rock Bits
3"
Rock Bits
SAND BIT
Part Number Cut Style
351-143 1.38" Slip Latch

REAMERS
ROCK BIT

ROTO WITCH®
Part Number Diameter Style
351-065 4.75" Threaded
Part Number Cut Style
351-013 6.00" Threaded
351-310 1.5" Two Prong Slip Latch
351-014 8.00" Threaded
351-311 2.0" Two Prong Slip Latch
351-059 10.00" Threaded
351-312 3.0" Two Prong Slip Latch
351-031 12.00" Threaded
351-337 1.5" Spade Slip Latch
351-147 2.50" Slip Latch
351-313 Bit Body
351-148 3.00" Slip Latch
351-314 Bit Body
351-149 3.50" Slip Latch
105-525 Roll Pin For
Rock Bit 351-150 4.00" Slip Latch

74 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 75

 VA C U U M A C C E S S O R I E S ditchwitch.com

Prospector Lance

HYDRO EXCAVATION
Part Number Model(s) Description
150-2624 FX20, FX25, FX30, FXT30, MV800 Prospector™ Nozzle (#3) Prospector Nozzle
150-2625 FX50, FXT50, FX65, FXT65 Prospector Nozzle (#5)
190-2506 FX50, FXT50, FX65, FXT65 Prospector Assembly Lance 48" (#5)
190-2507 FX20, FX25, FX30, FXT30, MV800 Prospector Assembly Lance 48" (#3)
259-1012 All Prospector Extension 48"
259-1017 All Wash Wand
150-2630 FX20, FX25, FX30, FXT30, MV800 Prospector Nozzle (#3) Repair Kit
150-2631 FX20, FXT50, FX65, FXT65 Prospector Nozzle (#5) Repair Kit

259-1017

Prospector Nozzle Repair Kit

259-1012

AIR EXCAVATION
INCREASE YOUR PERFORMANCE.

VA C U U M A C C E S S O R I E S
INCREASE YOUR PROFITS.
art Number
P Model(s) Description
350-4430 FXT30 Air, FXT50 Air, FXT65 Air Air Saber Assembly
350-4431 FXT30 Air, FXT50 Air, FXT65 Air Air Saber Extension 36"

Ditch Witch® provides a variety of new attachments for vacuum excavators, built to increase your performance
and productivity. Manufactured to work as hard as you do, these attachments will maximize versatility so you
can tackle any jobsite challenge.

76 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 77

 UP TIME KITS ditchwitch.com

Reduce downtime. Increase productivity.

Preserve equipment value. TRENCHERS TRENCHLESS
art Number
P Model(s) Kit Type art Number
P Model(s) Kit Type
Failure to perform regular maintenance on equipment is a primary cause of breakdowns, and over time
190-2200 C12 Basic 190-2100 FM25 Basic
can greatly reduce the value of your machine. Orange Armor® Uptime Kits are designed to help you
190-2426 C14 Basic 190-2105 FM13V Basic
properly care for your equipment, resulting in consistent productivity, reduction of major repair costs and 190-2430 C16/C16X Basic 190-2131 JT5 T4F 1000 HR
maximum equipment value. 190-2435 C24X Basic 190-2172 JT9 T4F 1000 HR
190-2440 C30X Basic 190-2174 JT9 T4i 1000 HR
Each kit contains air, fuel, oil and hydraulic filters, spark plugs, or other parts needed for scheduled 190-1759 RT12 Basic 190-2112 JT20 T4F/T4i 1000 HR
190-1760 RT16 Basic 190-2106 JT25 T3 1000 HR
maintenance specified for each machine. The larger kits also include basic wear parts and are shipped in
190-1761 RT20/24 Basic 190-2107 JT25 T4i 1000 HR
lockable, reusable storage trunks at no additional cost. 190-1764 RT45 Basic 190-2136 JT/AT30 T3 1000 HR
190-1766 410SX T4i Basic 190-2137 JT/AT30 T4i 1000 HR
Make scheduled maintenance easier, more convenient and 190-1767 420SX T2/T4i Basic 190-2116 JT/AT100 T3 1000 HR
more affordable with an Orange Armor Uptime Kit customized 190-2103 RT30 Basic 190-2126 JT1220 T4i 1000 HR
190-2122 RT80Q T4F 1000 HR 190-2173 JT922 T3 1000 HR
for your equipment.
190-2142 RT120 T4i 1000 HR 190-2191 MR90 1000 HR
190-2147 RT100 T4i 1000 HR 190-2156 JT/AT60 T3 1000 HR
190-2151 RT45 T4F 1000 HR
190-2152 RT45 T4i 1000 HR
190-2154 RT45 T4i Basic
Basic Kits
190-2166 RT120Q T4i 1000 HR
VACUUM EXCAVATORS
190-2176 410SX GAS 1000 HR
190-2181 RT55 T4i 1000 HR art Number
P Model(s) Kit Type
190-2151 RT45 T4F 1000 HR 190-2101 FX20 Basic
190-2102 FX25/MV800 Basic
190-2104 FX30/FXT30 T3/T4F (NOT T4i) 1000 HR
190-2161 FX50/FXT50 T4i 1000 HR
MINI SKID STEERS 190-2162 FX50/FXT50 T4F 1000 HR
190-2186 FX60 T4i 1000 HR
1000 hour kits art Number
P Model(s) Kit Type 190-2187 FX60/FXT60 T4 1000 HR
190-1762 SK350 Basic
190-1763 SK650/SK750/SK755 T4i Basic
190-2196 SK850 Basic
KEY FEATURES/BENEFITS 190-1765 R300 Basic
• Up to 15% savings versus buying parts individually
• Customized for each machine to ensure proper
maintenance
• Larger kits include some wear items in addition to
maintenance items
• Reusable, lockable storage trunks provided at no
additional cost on larger kits

78 For more, visit ditchwitch.com/parts-service. To find your dealer, visit ditchwitch.com/find-a-dealer. 79

 THE CHARLES MACHINE WORKS, INC. DITCH WITCH® WORLDWIDE HEADQUARTERS PERRY, OK 73077-0066 U.S.A.

TOLL FREE 800 654 6481 PHONE 580 336 4402 FAX 580 336 3458 INTERNATIONAL FAX 580 572 3561

FOR INFORMATION ABOUT EASY FINANCING AND TO FIND THE DEALER NEAREST YOU, VISIT DITCHWITCH.COM.

SHARK TOOTH® IS A FEDERALLY REGISTERED TRADEMARK OF CONSOLIDATED CARBIDE, LTD.

SHARK® IS A FEDERALLY REGISTERED TRADEMARK OF CONSOLIDATED CARBIDE, LTD.

SHARK CHAIN® IS A FEDERALLY REGISTERED TRADEMARK OF CONSOLIDATED CARBIDE, LTD.

19K | 33K /35K | 50K | 70K /110K | 150K /225K

PLOW BLADES | EARTH SAW | ROTO WITCH ® | MICROTRENCHING | VACUUM ACCESSORIES

©2016 The Charles Machine Works, Inc. LFCMW798101-1116-03