Sunwind Electronics Company Ltd.
Stepper Motor Driver:M542H
Datasheet-TB6560 3Axis Stepper Motor
Driver
1.Introduction
The TB6560-3 Axis Stepper Motor Driver is a excellent microstepping driver that use TOSHIBA
TB6560 Chip,based on pure-sine current control technology.Owing to the above technology and
the self-adjustment technology (self-adjust current control parameters) according to different
motors, the driven motors can run with smaller noise, lower heating, smoother movement and
have better performances at higher speed than most of the drives in the markets. It is suitable for
driving 2-phase and 4-phase hybrid stepping motors.
http://www.stepmotordriver.com 1/6 [email protected]
Sunwind Electronics Company Ltd.
Stepper Motor Driver:M542H
2.Features
Low cost and good high-speed torque 7 output current choices, max 3200
Supply voltage up to +32 VDC steps/rev
Output current up to 3.0A Automatic idle-current reduction
Pulse frequency up to 20 KHz
Suitable for 2-phase and 4-phase motors Slim size (96x61x37mm)
Over-voltage and short-circuit protection
3.Applications
Applications
Suitable for a wide range of stepping motors from NEMA size 17 to 23. It can be used in various kinds of
machines, such as X-Y-Z tables, labeling machines, laser cutters, engraving machines,pick-place
devices, and so on. Particularly adapt to the applications desired with low vibration,high speed and high
precision.
http://www.stepmotordriver.com 2/6 [email protected]
Sunwind Electronics Company Ltd.
Stepper Motor Driver:M542H
4. Specifications and Operating Environment
Electrical Specifications(Tj=25°C)
TB6560-3AXIS
Parameters
Min Typical Max Unit
Output current 0.6 - 3 A
Input voltage 7 24 32 VDC
Inner Frequence 640 20000 Hz
Outer input frequency 0 - 16000 Hz
H 4.5 5 5.5 VDC
Connector Voltage
L 0 0 0.5 VDC
TB6560-3Axis Interface Definition
http://www.stepmotordriver.com 3/6 [email protected]
Sunwind Electronics Company Ltd.
Stepper Motor Driver:M542H
TB6560-3Axis Wiring Diagram
Controller interface voltage=5V, no resistance;
Controller interface voltage=12V, series connect a 1K resistance;
Controller interface voltage=24V, series connect a 2.7K resistance
Ps:
EN- inputs high level or being hanged, optocoupler U6 light off, step motor=working
EN- inputs low level, optocoupler U6 light on, step motor= not working
http://www.stepmotordriver.com 4/6 [email protected]
Sunwind Electronics Company Ltd.
Stepper Motor Driver:M542H
TB6560-3Axis Working Current Setting
Attention:Please ensure the motor power off during setting!
Current Setting
I(A) 0.5 1 1.5 1.8 2 2.5 3
SW1 0 0 0 1 1 1 1
SW2 1 0 1 0 1 0 1
SW3 0 1 1 0 0 1 1
ResistanceΩ 1 0.51 0.34 0.33 0.25 0.2 0.167
TB6560-3Axis Excitation Setting:
Excitation Mode Setting
SW4 1 2 8 16
S3/M2 1 1 0 0
S4/M1 1 0 0 1
TB6560-3Axis Decay Setting:
Decay Mode Setting
SW4 0% 25% 50% 100%
S5/DY2 1 1 0 0
S6/DY1 1 0 1 0
It is can lower the noises and increase the stability by decay mode setting.
http://www.stepmotordriver.com 5/6 [email protected]
Sunwind Electronics Company Ltd.
Stepper Motor Driver:M542H
TB6560-3Axis Semi-Current Lock Torque Setting:
Semi-current Torque Setting
SW4 20% 50% 75% 100%
S1/TQ2 0 0 1 1
S2/TQ1 0 1 0 1
Sunwind Electronics Company Limited.
Add:7th Floor,Block H,Juyin Industrial Park,Ganli Road 1#,Buji,Shenzhen,China.P.C.518112
Homepage:http://www.stepmotordriver.com
Phone:0086 755 86610835 Fax: 0086 755 86610201
E-mail:[email protected]
http://www.stepmotordriver.com 6/6 [email protected]
