ACP Tutorials

ANSYS, Inc. Release 2020 R1

Southpointe January 2020
2600 ANSYS Drive
Canonsburg, PA 15317 ANSYS, Inc. and
[email protected] ANSYS Europe,
Ltd. are UL
http://www.ansys.com registered ISO
(T) 724-746-3304 9001: 2015
(F) 724-514-9494 companies.
Copyright and Trademark Information

© 2020 ANSYS, Inc. Unauthorized use, distribution or duplication is prohibited.

ANSYS, ANSYS Workbench, AUTODYN, CFX, FLUENT and any and all ANSYS, Inc. brand, product, service and feature
names, logos and slogans are registered trademarks or trademarks of ANSYS, Inc. or its subsidiaries located in the
United States or other countries. ICEM CFD is a trademark used by ANSYS, Inc. under license. CFX is a trademark
of Sony Corporation in Japan. All other brand, product, service and feature names or trademarks are the property
of their respective owners. FLEXlm and FLEXnet are trademarks of Flexera Software LLC.

Disclaimer Notice

THIS ANSYS SOFTWARE PRODUCT AND PROGRAM DOCUMENTATION INCLUDE TRADE SECRETS AND ARE CONFID-
ENTIAL AND PROPRIETARY PRODUCTS OF ANSYS, INC., ITS SUBSIDIARIES, OR LICENSORS. The software products
and documentation are furnished by ANSYS, Inc., its subsidiaries, or affiliates under a software license agreement
that contains provisions concerning non-disclosure, copying, length and nature of use, compliance with exporting
laws, warranties, disclaimers, limitations of liability, and remedies, and other provisions. The software products
and documentation may be used, disclosed, transferred, or copied only in accordance with the terms and conditions
of that software license agreement.

ANSYS, Inc. and ANSYS Europe, Ltd. are UL registered ISO 9001: 2015 companies.

U.S. Government Rights

For U.S. Government users, except as specifically granted by the ANSYS, Inc. software license agreement, the use,
duplication, or disclosure by the United States Government is subject to restrictions stated in the ANSYS, Inc.
software license agreement and FAR 12.212 (for non-DOD licenses).

Third-Party Software

See the legal information in the product help files for the complete Legal Notice for ANSYS proprietary software
and third-party software. If you are unable to access the Legal Notice, contact ANSYS, Inc.

Published in the U.S.A.

Table of Contents
1. Introduction ............................................................................................................................................ 1
1.1. Workshop 1: Basic Sandwich Panel .................................................................................................... 1
1.2. Workshop 2: T-Joint ........................................................................................................................... 2
1.3. Workshop 3: Rules ............................................................................................................................. 2
1.4. Workshop 4: Advanced Sandwich Panel ............................................................................................. 3
1.5. Workshop 5: Solid Modeling .............................................................................................................. 4
1.6. Workshop 6: Kiteboard ...................................................................................................................... 5
1.7. Workshop 7: Parameters in ACP ......................................................................................................... 5

Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. iii
 Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
iv of ANSYS, Inc. and its subsidiaries and affiliates.
Chapter 1: Introduction
The following workshops and example give an introduction to the use of ACP.
1.1. Workshop 1: Basic Sandwich Panel
1.2. Workshop 2: T-Joint
1.3. Workshop 3: Rules
1.4. Workshop 4: Advanced Sandwich Panel
1.5. Workshop 5: Solid Modeling
1.6. Workshop 6: Kiteboard
1.7. Workshop 7: Parameters in ACP

The Example Analyses also feature demonstrations on the following workflows:

• Analysis Using Variable Material Data

• Analysis of a Mapped Composite Solid Model

• Shear Dependent Materials in Composite Analysis

Further training materials for ACP are available on the ANSYS Learning Hub.

1.1. Workshop 1: Basic Sandwich Panel

In this first workshop, you learn the first steps in ACP. A basic sandwich panel is defined starting from
the beginning.

The layup is defined first and the principle post-processing operations show how composite structures
can be analyzed efficiently with ACP-Post.

The model and step-by-step instructions for Workshop 1 can be downloaded here.

Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 1
Introduction

1.2. Workshop 2: T-Joint

T-joint sections are ubiquitous in composite constructions. They are used to connect two parts at right
angles.

In this workshop, we will model a T-joint in ACP-Pre. It will demonstrate the model-as-you-build-it ap-
proach of ACP and highlight the strengths of the Oriented Selection Sets.

The model and step-by-step instructions can be downloaded here.

1.3. Workshop 3: Rules

Basic and advanced ACP-Pre features are used in this example for the layup definition of a sailboat hull
section. The example is based on a boat designed according to the class40 box rules.

• Patches are defined to reinforce the structure locally.

• The hull's sandwich core has a variable thickness and is tapered as well.

• A draping simulation on the hull's outer skin is configured to determine fiber angles.

• The associative workflow allows for swift design iterations.

In this workshop, you will use selection rules to reinforce the structure. The model and step-by-step
instructions for this example can be downloaded here.

Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
2 of ANSYS, Inc. and its subsidiaries and affiliates.
 Workshop 4: Advanced Sandwich Panel

1.4. Workshop 4: Advanced Sandwich Panel

Workshop 4 illustrates some advanced features of ACP-Pre on a sandwich panel.

• Tapered edges

• Core with variable thickness

• Local reinforcements

The model and step-by-step instructions for Workshop 4 can be downloaded here.

Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 3
Introduction

1.5. Workshop 5: Solid Modeling

In this workshop, we create a composite solid model for a doubly-curved tensile test specimen. For
thick composite structure, the plane-stress assumption of shell elements no longer holds true and we
have to move solid elements for an accurate representation. Solid elements capture the 3D stress state
and in this workshop we compare the results of 2D and 3D failure criteria.

The model and step-by-step instructions for Workshop 5 can be downloaded here.

Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
4 of ANSYS, Inc. and its subsidiaries and affiliates.
 Workshop 7: Parameters in ACP

1.6. Workshop 6: Kiteboard

This workshop takes you through the modeling of a kiteboard.

• A basic laminate definition

• The use of a CAD geometry to define a varying core thickness

• Post-Processing in the Mechanical Composite Failure Tool as well as ACP-Post

The model and step-by-step instructions for Workshop 6 can be downloaded here.

1.7. Workshop 7: Parameters in ACP

In this workshop, we will use Workbench parameters to modify the laminate of a composite part. We
will solve the model and define output parameters for bending and torsion stiffness of the model, and
for evaluating specific failures. We will specify design variations in ANSYS Workbench and update all
design points to optimize the design of the part.

The model and step-by-step instructions for Workshop 7 can be downloaded here.

Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
of ANSYS, Inc. and its subsidiaries and affiliates. 5
 Release 2020 R1 - © ANSYS, Inc. All rights reserved. - Contains proprietary and confidential information
6 of ANSYS, Inc. and its subsidiaries and affiliates.