Scribd
Upload
52 views18 pages

2d Malaci

This document contains steel design reports for beams 66 and 67. It provides material properties, section properties, design data, buckling calculations, and critical load calculations for each beam to check compliance with design clauses. Beam 66 passed all clause checks with ratios of load to capacity below 0.5. Similarly, beam 67 passed all clause checks with ratios below 0.5.

Uploaded by

okechukwu1benjamin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
52 views18 pages

2d Malaci

This document contains steel design reports for beams 66 and 67. It provides material properties, section properties, design data, buckling calculations, and critical load calculations for each beam to check compliance with design clauses. Beam 66 passed all clause checks with ratios of load to capacity below 0.5. Similarly, beam 67 passed all clause checks with ratios below 0.5.

Uploaded by

okechukwu1benjamin
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 18

Roof Steel Design Report

To: From:

Copy to: Date: Ref:


02/04/2019 ca/ 478545049.docx

STEEL DESIGN (TRACK 2) BEAM 66 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=====================================================================
66 LD UA75X75X6 PASS BS-4.8.2.2 0.438 3
6.96 T 0.00 2.01 0.00
=====================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.014

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.01 : My = 0.00 : My = 0.00

02/06/2020
CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -
BS-4.6 (T) 0.014 3 7.0 - - - -
BS-4.7 (C) 0.039 1 1.4 - - - -
BS-4.8.2.2 0.438 3 7.0 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.423 3 7.0 - - 2.0 0.0
BS-4.8.3.2 0.027 1 1.4 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.063 1 1.4 - - 0.1 0.0

STEEL DESIGN (TRACK 2) BEAM 66 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=====================================================================
66 LD UA75X75X6 PASS BS-4.8.2.2 0.438 3
6.96 T 0.00 2.01 0.00
=====================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.014

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.01 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -

02/06/2020
BS-4.6 (T) 0.014 3 7.0 - - - -
BS-4.7 (C) 0.039 1 1.4 - - - -
BS-4.8.2.2 0.438 3 7.0 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.423 3 7.0 - - 2.0 0.0
BS-4.8.3.2 0.027 1 1.4 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.063 1 1.4 - - 0.1 0.0

STEEL DESIGN (TRACK 2) BEAM 67 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=====================================================================
67 LD UA75X75X6 PASS BS-4.8.2.2 0.435 3
4.15 T 0.00 -2.02 3.00
=====================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.009

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.02 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -
BS-4.6 (T) 0.009 3 4.1 - - - -
BS-4.7 (C) 0.043 1 1.6 - - - -
BS-4.8.2.2 0.435 3 4.1 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.426 3 4.1 - - 2.0 0.0

02/06/2020
BS-4.8.3.2 0.026 1 1.6 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.066 1 1.6 - - 0.1 0.0

STEEL DESIGN (TRACK 2) BEAM 67 CHECK 2


ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=====================================================================
67 LD UA75X75X6 PASS BS-4.8.2.2 0.435 3
4.15 T 0.00 -2.02 3.00
=====================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.009

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.02 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -
BS-4.6 (T) 0.009 3 4.1 - - - -
BS-4.7 (C) 0.043 1 1.6 - - - -
BS-4.8.2.2 0.435 3 4.1 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.426 3 4.1 - - 2.0 0.0
BS-4.8.3.2 0.026 1 1.6 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.066 1 1.6 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 69 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=====================================================================
69 LD UA75X75X6 PASS BS-4.8.2.2 0.435 3
4.15 T 0.00 2.02 0.00
=====================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.009

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.02 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -
BS-4.6 (T) 0.009 3 4.1 - - - -
BS-4.7 (C) 0.043 1 1.6 - - - -
BS-4.8.2.2 0.435 3 4.1 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.426 3 4.1 - - 2.0 0.0
BS-4.8.3.2 0.026 1 1.6 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.066 1 1.6 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 69 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
====================================================================
69 LD UA75X75X6 PASS BS-4.8.2.2 0.435 3
4.15 T 0.00 2.02 0.00
=====================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.009

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.02 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -
BS-4.6 (T) 0.009 3 4.1 - - - -
BS-4.7 (C) 0.043 1 1.6 - - - -
BS-4.8.2.2 0.435 3 4.1 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.426 3 4.1 - - 2.0 0.0
BS-4.8.3.2 0.026 1 1.6 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.066 1 1.6 - - 0.1 0.0
.

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 70 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
70 LD UA75X75X6 PASS BS-4.8.2.2 0.438 3
6.96 T 0.00 -2.01 3.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.014

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.01 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -
BS-4.6 (T) 0.014 3 7.0 - - - -
BS-4.7 (C) 0.039 1 1.4 - - - -
BS-4.8.2.2 0.438 3 7.0 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.423 3 7.0 - - 2.0 0.0
BS-4.8.3.2 0.027 1 1.4 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.063 1 1.4 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 70 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
70 LD UA75X75X6 PASS BS-4.8.2.2 0.438 3
6.96 T 0.00 -2.01 3.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 300.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.014

z-z axis y-y axis


Compression Capacity : 147.0 37.4
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 204.082 129.450 285.714
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 3.000 3.000

LTB Moment Capacity (kNm) and LTB Length (m): 2.20, 3.000
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 2.01 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.044 3 - 3.9 - - -
BS-4.6 (T) 0.014 3 7.0 - - - -
BS-4.7 (C) 0.039 1 1.4 - - - -
BS-4.8.2.2 0.438 3 7.0 3.9 0.0 2.0 0.0
BS-4.8.2.3 0.423 3 7.0 - - 2.0 0.0
BS-4.8.3.2 0.027 1 1.4 0.2 0.0 0.1 0.0
BS-4.8.3.3.1 0.063 1 1.4 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 84 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
84 LD UA75X75X6 PASS BS-4.8.2.2 0.366 3
60.33 T 0.00 1.14 0.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 335.41
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT

z-z axis y-y axis


Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)

LTB Moment Capacity (kNm) and LTB Length (m): 1.94, 3.354
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 0.00 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.022 3 - 2.0 - - -
BS-4.6 (T) 0.126 3 60.3 - - - -
BS-4.8.2.2 0.366 3 60.3 2.0 0.0 1.1 0.0
BS-4.8.2.3 0.241 3 60.3 - - 1.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 84 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
84 LD UA75X75X6 PASS BS-4.8.2.2 0.366 3
60.33 T 0.00 1.14 0.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 335.41
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT

z-z axis y-y axis


Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)

LTB Moment Capacity (kNm) and LTB Length (m): 1.94, 3.354
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 0.00 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.022 3 - 2.0 - - -
BS-4.6 (T) 0.126 3 60.3 - - - -
BS-4.8.2.2 0.366 3 60.3 2.0 0.0 1.1 0.0
BS-4.8.2.3 0.241 3 60.3 - - 1.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 85 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
85 LD UA75X75X6 PASS BS-4.8.2.2 0.366 3
60.33 T 0.00 1.14 0.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 335.41
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT

z-z axis y-y axis


Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)

LTB Moment Capacity (kNm) and LTB Length (m): 1.94, 3.354
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 0.00 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.022 3 - 2.0 - - -
BS-4.6 (T) 0.126 3 60.3 - - - -
BS-4.8.2.2 0.366 3 60.3 2.0 0.0 1.1 0.0
BS-4.8.2.3 0.241 3 60.3 - - 1.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 85 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
85 LD UA75X75X6 PASS BS-4.8.2.2 0.366 3
60.33 T 0.00 1.14 0.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 335.41
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT

z-z axis y-y axis


Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1
Local Slenderness lamda : 204.08 > 50 (Cl.4.7.9)

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)

LTB Moment Capacity (kNm) and LTB Length (m): 1.94, 3.354
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 0.00 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.022 3 - 2.0 - - -
BS-4.6 (T) 0.126 3 60.3 - - - -
BS-4.8.2.2 0.366 3 60.3 2.0 0.0 1.1 0.0
BS-4.8.2.3 0.241 3 60.3 - - 1.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 93 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
93 LD UA75X75X6 PASS BS-4.8.2.2 0.683 3
8.01 T 0.00 3.17 0.50
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 50.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.017

z-z axis y-y axis


Compression Capacity : 373.8 366.6
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 34.014 45.103 47.619
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 0.500 0.500

LTB Moment Capacity (kNm) and LTB Length (m): 4.75, 0.500
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 3.17 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.108 3 - 9.6 - - -
BS-4.6 (T) 0.017 3 8.0 - - - -
BS-4.7 (C) 0.002 1 0.9 - - - -
BS-4.8.2.2 0.683 3 8.0 8.3 0.0 3.2 0.0
BS-4.8.2.3 0.667 3 8.0 - - 3.2 0.0
BS-4.8.3.2 0.032 1 0.9 0.0 0.0 0.1 0.0
BS-4.8.3.3.1 0.032 1 0.9 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 93 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
93 LD UA75X75X6 PASS BS-4.8.2.2 0.683 3
8.01 T 0.00 3.17 0.50
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 50.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.017

z-z axis y-y axis


Compression Capacity : 373.8 366.6
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 34.014 45.103 47.619
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 0.500 0.500

LTB Moment Capacity (kNm) and LTB Length (m): 4.75, 0.500
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 3.17 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.108 3 - 9.6 - - -
BS-4.6 (T) 0.017 3 8.0 - - - -
BS-4.7 (C) 0.002 1 0.9 - - - -
BS-4.8.2.2 0.683 3 8.0 8.3 0.0 3.2 0.0
BS-4.8.2.3 0.667 3 8.0 - - 3.2 0.0
BS-4.8.3.2 0.032 1 0.9 0.0 0.0 0.1 0.0
BS-4.8.3.3.1 0.032 1 0.9 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 94 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
94 LD UA75X75X6 PASS BS-4.8.2.2 0.683 3
8.01 T 0.00 3.17 0.50
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 50.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.017

z-z axis y-y axis


Compression Capacity : 373.8 366.6
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 34.014 45.103 47.619
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 0.500 0.500

LTB Moment Capacity (kNm) and LTB Length (m): 4.75, 0.500
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 3.17 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.108 3 - 9.6 - - -
BS-4.6 (T) 0.017 3 8.0 - - - -
BS-4.7 (C) 0.002 1 0.9 - - - -
BS-4.8.2.2 0.683 3 8.0 8.3 0.0 3.2 0.0
BS-4.8.2.3 0.667 3 8.0 - - 3.2 0.0
BS-4.8.3.2 0.032 1 0.9 0.0 0.0 0.1 0.0
BS-4.8.3.3.1 0.032 1 0.9 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 94 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
94 LD UA75X75X6 PASS BS-4.8.2.2 0.683 3
8.01 T 0.00 3.17 0.50
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 50.00
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT
Squash Load : 480.15
Axial force/Squash load : 0.017

z-z axis y-y axis


Compression Capacity : 373.8 366.6
Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)
v-v axis x-x axis y-y axis
Slenderness : 34.014 45.103 47.619
Radius of gyration (cm) : 1.470 2.317 3.111
Effective Length : 0.000 0.500 0.500

LTB Moment Capacity (kNm) and LTB Length (m): 4.75, 0.500
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 3.17 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.108 3 - 9.6 - - -
BS-4.6 (T) 0.017 3 8.0 - - - -
BS-4.7 (C) 0.002 1 0.9 - - - -
BS-4.8.2.2 0.683 3 8.0 8.3 0.0 3.2 0.0
BS-4.8.2.3 0.667 3 8.0 - - 3.2 0.0
BS-4.8.3.2 0.032 1 0.9 0.0 0.0 0.1 0.0
BS-4.8.3.3.1 0.032 1 0.9 - - 0.1 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 95 CHECK 1

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
95 LD UA75X75X6 PASS BS-4.8.2.2 0.860 3
24.28 T 0.00 3.85 0.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 427.20
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT

z-z axis y-y axis


Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)

LTB Moment Capacity (kNm) and LTB Length (m): 1.33, 4.272
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 0.00 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.059 3 - 5.3 - - -
BS-4.6 (T) 0.051 3 24.3 - - - -
BS-4.8.2.2 0.860 3 24.3 5.3 0.0 3.8 0.0
BS-4.8.2.3 0.809 3 24.3 - - 3.8 0.0

02/06/2020
STEEL DESIGN (TRACK 2) BEAM 95 CHECK 2

ALL UNITS ARE - KN METE (UNLESS OTHERWISE Noted)

MEMBER TABLE RESULT/ CRITICAL COND/ RATIO/ LOADING/


FX MY MZ LOCATION
=======================================================================
95 LD UA75X75X6 PASS BS-4.8.2.2 0.860 3
24.28 T 0.00 3.85 0.00
=======================================================================
MATERIAL DATA
Grade of steel = S 43
Modulus of elasticity = 205 kN/mm2
Design Strength (py) = 275 N/mm2

SECTION PROPERTIES (units - cm)


Member Length = 427.20
Gross Area = 17.46 Net Area = 17.46 Eff. Area = 17.46

z-z axis y-y axis


Moment of inertia : 93.774 168.968
Plastic modulus : 31.115 40.552
Elastic modulus : 17.286 22.529
Effective modulus : 17.286 22.529
Shear Area : 5.400 5.400

DESIGN DATA (units - kN,m) BS5950-1/2000


Section Class : SEMI-COMPACT

z-z axis y-y axis


Tension Capacity : 480.2 480.2
Moment Capacity : 4.8 6.2
Reduced Moment Capacity : 4.8 6.2
Shear Capacity : 89.1 89.1

BUCKLING CALCULATIONS (units - kN,m)


(axis nomenclature as per design code)

LTB Moment Capacity (kNm) and LTB Length (m): 1.33, 4.272
LTB Coefficients & Associated Moments (kNm):
mLT = 1.00 : mx = 1.00 : my = 1.00 : myx = 0.00
Mlt = 0.00 : Mx = 0.00 : My = 0.00 : My = 0.00

CRITICAL LOADS FOR EACH CLAUSE CHECK (units- kN,m):

CLAUSE RATIO LOAD FX VY VZ MZ MY


BS-4.2.3-(Y) 0.059 3 - 5.3 - - -
BS-4.6 (T) 0.051 3 24.3 - - - -
BS-4.8.2.2 0.860 3 24.3 5.3 0.0 3.8 0.0
BS-4.8.2.3 0.809 3 24.3 - - 3.8 0.0

02/06/2020

You might also like