Scribd
Upload
54 views

Homogenizer Overview

Homogenization is a process that uniformly disperses liquids or particles in a liquid. It was invented in 1899 and involves adding surfactants and mechanical energy to join phases. Homogenizers work by forcing emulsions through a small gap under high pressure, which breaks particles into smaller and more uniform sizes. Selecting the right homogenizer depends on the desired product characteristics and production conditions.

Uploaded by

9567592146
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
54 views

Homogenizer Overview

Homogenization is a process that uniformly disperses liquids or particles in a liquid. It was invented in 1899 and involves adding surfactants and mechanical energy to join phases. Homogenizers work by forcing emulsions through a small gap under high pressure, which breaks particles into smaller and more uniform sizes. Selecting the right homogenizer depends on the desired product characteristics and production conditions.

Uploaded by

9567592146
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Homogenization Overview

Homogenization is the process of emulsifying two immiscible liquids (i.e. liquids that are not soluble in one another) or
uniformly dispersing solid particles throughout a liquid. The benefits include improved product stability, uniformity,
consistency, viscosity, shelf life, improved flavor and color. It has become a standard industrial process in food and
beverage, chemical, pharmaceutical and personal care industries.

The process of homogenization was invented and patented by


Auguste Gaulin in 1899 when he described a process for
homogenizing milk. Gaulin’s machine, a three-piston
thruster outfitted with tiny filtration tubes, was shown at the
World Fair in Paris in 1900. Since then, his name has become
synonymous with homogenization.

Basic emulsion formation involves adding both a surfactant


and mechanical energy to join the two phases. The first step
or primary homogenization involves adding surfactants or
emulsifiers. Emulsions, by nature, are inherently unstable.
Over time, all emulsions will eventually coalesce or “break”. Surfactants work by facilitating the creation of the
emulsion and help slow down its eventual break. The resulting particle size of the globules can range in size from 0.1 to
10 microns. Emulsions change their size distribution over time, shifting to larger sizes.

The stability of an emulsion is determined by several factors including the choice of emulsifier, the phase-volume ratio,
the method of manufacturing the emulsion and the temperature in both processing and storage.

The order of addition, the rate of addition and the energy of the system can have a large impact on the final properties
of the emulsion. Ideally, the lipophilic (oil-loving) surfactant should be dispersed in the oil phase. Finer emulsions result
when the hydrophilic (water-loving) surfactant is also dispersed in the oil phase. When combining oil and water, the
addition of water to the oil phase produces the finest emulsions. If the oil is added to the water phase, more energy is
required to produce small droplets. A significant improvement in the emulsion can usually be seen by adding the water
phase at a slower rate. Most emulsions are sensitive to the temperature of the system. Generally heat is added to the
system since warm oil/fat molecules disintegrate more easily than cold ones.

Micro-emulsions are a dispersion of water, oil and surfactant with particle sizes ranging from 1-100 nm. They are
typically characterized as a more stable emulsion and are generally clear in appearance. They tend to have a higher
concentration of surfactant relative to the oil content. These are commonly used in the pharmaceutical and personal
care industries.

Greensboro Division / Corporate Headquarters Louisville Division Nashville Division


Phone: 336.393.0100 / 800.334.0231 Phone: 502.459.7475 / 800.459.7475 Phone: 615.822.3030 / 855.749.4820

www.mgnewell.com [email protected] [email protected]


The Homogenizer

In today’s environment, homogenizers are used to produce


more consistent emulsions in a high efficiency process. A
wide variety of homogenizers have been developed to run at
different pressures and capacities depending on the product
mixture. In addition to product improvements, today’s
homogenizers also feature reduced noise and vibration and
reduced maintenance.

So how do homogenizers work?

a. The non-homogenized product enters the valve seat at


high pressure and low velocity.

b. As the product enters the close (and adjustable) clearance


between the valve and the seat, there is a rapid increase in velocity
and decrease in pressure.

c. The intense energy release causes turbulence and localized


pressure differences which tear apart the particles.

d. The homogenized product impinges on the impact ring and


exits at a pressure sufficient for movement to the next step.

Homogenizers may be equipped with a single valve assembly


(single-stage) or two valves connected in a series (two-stage). For most products, a single-stage valve is sufficient. A
two-stage assembly, where ~10% of the total pressure is applied to the 2nd stage, controls back pressure and minimizes
clumping. This improves the droplet size reduction and narrows the particle size distribution. Generally, two-stage
homogenization is used for products with a high fat content or products where high homogenization efficiency is
required.

Single-stage Two-stage

www.mgnewell.com [email protected] [email protected]


The valve technology is one of the most critical components of the homogenizer. Poppet valves are typically used for
low-viscosity, moderately abrasive products such as ice cream, dairy, vegetable oils or silicone emulsions. Ball valves are
used for high-viscosity, abrasive products such as peanut butter, evaporated milk or wax emulsion.

Potential Problems

To minimize potential problems with your homogenizer, one should realize that not all products are conducive to
produce in a homogenizer. If you are running one of these types of products or process conditions, you should review
the product, process and equipment with one of our technical representatives. Alternatives such as high-speed blending
or colloid mills may be recommended.

 Air in the product


 Heavy particles in the product
 Wearing or abrasive products
 High viscosity products
 Aggressive products (i.e. chlorine ions)
 High temperatures (max 105°C)
 Low flash point products
 Products with high solids content

Selecting a homogenizer

When purchasing or replacing a homogenizer, discuss the following parameters with one of our representatives.

1. Define the desired product characteristics


 What particle size and size distribution is desired?
 What is the product viscosity?
2. Define the desire production conditions
 Batch vs continuous
 Volume desired
 Temperature
3. Identify and test homogenizers
 Should I use a high-speed blender vs a high-pressure homogenizer vs a colloid mill
 Rent a homogenizer for a trial period
4. Optimize homogenization conditions
 Pressure
 Flow rate
 Time and temperature
 Emulsifier type and concentration

www.mgnewell.com [email protected] [email protected]

You might also like