================================================================================

LPile for Windows, Version 2019-11.002

Analysis of Individual Piles and Drilled Shafts

Subjected to Lateral Loading Using the p-y Method
� 1985-2019 by Ensoft, Inc.
All Rights Reserved

================================================================================

This copy of LPile is being used by:

Mahindra susten Pvt Ltd

Mahindra susten Pvt Ltd

Serial Number of Security Device: 161221537

This copy of LPile is licensed for exclusive use by:

Mahindra Susten Private Limited,

Use of this program by any entity other than Mahindra Susten Private Limited,
is a violation of the software license agreement.

--------------------------------------------------------------------------------
Files Used for Analysis
--------------------------------------------------------------------------------

Path to file locations:

\Work\BD\2019-2020\Portugal_PT_Akuo Energy_370MVA\SANT\PVh\80%-Rock\CENTRAL\

Name of input data file:

trail with eq C section.lp11

Name of output report file:

trail with eq C section.lp11

--------------------------------------------------------------------------------
Program Options and Settings
--------------------------------------------------------------------------------

Computational Options:
- Conventional Analysis
Engineering Units Used for Data Input and Computations:
- International System Units (kilonewtons, meters, millimeters)

Analysis Control Options:

- Maximum number of iterations allowed = 500
- Deflection tolerance for convergence = 2.5400E-07 m
- Maximum allowable deflection = 2.5400 m
- Number of pile increments = 100

Loading Type and Number of Cycles of Loading:

 - Static loading specified

- Use of p-y modification factors for p-y curves not selected

- Analysis uses layering correction (Method of Georgiadis)
- Layering correction is not computed if soil above is of same type
- No distributed lateral loads are entered
- Loading by lateral soil movements acting on pile not selected
- Input of shear resistance at the pile tip not selected
- Input of moment resistance at the pile tip not selected
- Computation of pile-head foundation stiffness matrix not selected
- Push-over analysis of pile not selected
- Buckling analysis of pile not selected

Output Options:
- Output files use decimal points to denote decimal symbols.
- Values of pile-head deflection, bending moment, shear force, and
soil reaction are printed for full length of pile.
- Printing Increment (nodal spacing of output points) = 1
- No p-y curves to be computed and reported for user-specified depths
- Print using wide report formats

--------------------------------------------------------------------------------
Pile Structural Properties and Geometry
--------------------------------------------------------------------------------

Number of pile sections defined = 1

Total length of pile = 2.300 m
Depth of ground surface below top of pile = 0.0000 m

Pile diameters used for p-y curve computations are defined using 2 points.

p-y curves are computed using pile diameter values interpolated with depth over
the length of the pile. A summary of values of pile diameter vs. depth follows.

Depth Below Pile

Point Pile Head Diameter
meters millimeters
----- ------------- -------------
1 0.000 104.03
2 2.300 104.03

Input Structural Properties for Pile Sections:

----------------------------------------------

Pile Section No. 1:

Section 1 is an elastic pile with a specified moment capacity

Cross-sectional Shape = General Section
Length of section = 2.300000 m
Width of top of section = 0.104030 m
Width of bottom of section = 0.104030 m
Top Area = 0.008500 sq. m
Bottom Area = 0.008500 sq. m
Moment of Inertia at Top = 4.5650E-10 m^4
Moment of Inertia at Bottom = 4.5650E-10 m^4
 Elastic Modulus = 1.9900E+11 kPa
Plastic Moment Capacity at Top = 29.946000 kN-m
Plastic Moment Capacity at Bottom = 29.946000 kN-m
Top Elastic Bending Stiffness = 90.843680 kN-m^2
Bot Elastic Bending Stiffness = 90.843680 kN-m^2
Shear Capacity at top of section = 0.0000 kN
Shear Capacity at bottom of section = 0.0000 kN

--------------------------------------------------------------------------------
Ground Slope and Pile Batter Angles
--------------------------------------------------------------------------------

Ground Slope Angle = 0.000 degrees

= 0.000 radians

Pile Batter Angle = 0.000 degrees

= 0.000 radians

--------------------------------------------------------------------------------
Soil and Rock Layering Information
--------------------------------------------------------------------------------

The soil profile is modelled using 3 layers

Layer 1 is sand, p-y criteria by Reese et al., 1974

Distance from top of pile to top of layer = 0.0000 m

Distance from top of pile to bottom of layer = 0.900000 m
Effective unit weight at top of layer = 17.000000 kN/m3
Effective unit weight at bottom of layer = 17.000000 kN/m3
Friction angle at top of layer = 38.000000 deg.
Friction angle at bottom of layer = 38.000000 deg.
Subgrade k at top of layer = 0.0000 kN/m3
Subgrade k at bottom of layer = 0.0000 kN/m3

NOTE: Default values for subgrade k will be computed for this layer.

Layer 2 is sand, p-y criteria by Reese et al., 1974

Distance from top of pile to top of layer = 0.900000 m

Distance from top of pile to bottom of layer = 2.200000 m
Effective unit weight at top of layer = 20.000000 kN/m3
Effective unit weight at bottom of layer = 20.000000 kN/m3
Friction angle at top of layer = 40.000000 deg.
Friction angle at bottom of layer = 40.000000 deg.
Subgrade k at top of layer = 0.0000 kN/m3
Subgrade k at bottom of layer = 0.0000 kN/m3

NOTE: Default values for subgrade k will be computed for this layer.

Layer 3 is cemented silt with cohesion and friction

Distance from top of pile to top of layer = 2.200000 m

Distance from top of pile to bottom of layer = 4.000000 m
Effective unit weight at top of layer = 22.000000 kN/m3
 Effective unit weight at bottom of layer = 22.000000 kN/m3
Undrained cohesion at top of layer = 100.000000 kPa
Undrained cohesion at bottom of layer = 100.000000 kPa
Friction angle at top of layer = 40.000000 deg.
Friction angle at bottom of layer = 40.000000 deg.
Epsilon-50 at top of layer = 0.0000
Epsilon-50 at bottom of layer = 0.0000
Subgrade k at top of layer = 0.0000 kN/m3
Subgrade k at bottom of layer = 0.0000 kN/m3

NOTE: Default values for Epsilon-50 will be computed for this layer.
NOTE: Default values for subgrade k will be computed for this layer.

(Depth of the lowest soil layer extends 1.700 m below the pile tip)

**** Warning - Possible Input Data Error ****

Values entered for effective unit weights of soil were outside the limits of
3.15 kN/m3 to 22 kN/m3.
The input data may be erroneous. Please check your data.

The maximum input value, in layer 3, for effective unit weight = 22.00 kN/m3

--------------------------------------------------------------------------------
Summary of Input Soil Properties
--------------------------------------------------------------------------------

Layer Soil Type Layer Effective Undrained Angle of

E50
Layer Name Depth Unit Wt. Cohesion Friction
or kpy
Num. (p-y Curve Type) m kN/m3 kPa deg.
krm kN/m3
----- ------------------- ---------- ---------- ---------- ----------
---------- ----------
1 Sand 0.00 17.0000 -- 38.0000
-- default
(Reese, et al.) 0.9000 17.0000 -- 38.0000
-- default
2 Sand 0.9000 20.0000 -- 40.0000
-- default
(Reese, et al.) 2.2000 20.0000 -- 40.0000
-- default
3 Cemented 2.2000 22.0000 100.0000 40.0000
default default
Silt 4.0000 22.0000 100.0000 40.0000
default default

--------------------------------------------------------------------------------
Static Loading Type
--------------------------------------------------------------------------------

Static loading criteria were used when computing p-y curves for all analyses.
--------------------------------------------------------------------------------
Pile-head Loading and Pile-head Fixity Conditions
--------------------------------------------------------------------------------

Number of loads specified = 1

Load Load Condition Condition Axial Thrust

Compute Top y Run Analysis
No. Type 1 2 Force, kN
vs. Pile Length
----- ---- -------------------- ----------------------- ----------------
--------------- ------------
1 1 V = 4.124000 kN M = 7.044000 m-kN 11.289000000
No Yes

V = shear force applied normal to pile axis

M = bending moment applied to pile head
y = lateral deflection normal to pile axis
S = pile slope relative to original pile batter angle
R = rotational stiffness applied to pile head
Values of top y vs. pile lengths can be computed only for load types with
specified shear loading (Load Types 1, 2, and 3).
Thrust force is assumed to be acting axially for all pile batter angles.

--------------------------------------------------------------------------------
Computations of Nominal Moment Capacity and Nonlinear Bending Stiffness
--------------------------------------------------------------------------------

Axial thrust force values were determined from pile-head loading conditions

Number of Pile Sections Analyzed = 1

Pile Section No. 1:

-------------------
Moment-curvature properties were derived from elastic-plastic section properties

--------------------------------------------------------------------------------
Layering Correction Equivalent Depths of Soil & Rock Layers
--------------------------------------------------------------------------------

Top of Equivalent
Layer Top Depth Same Layer Layer is F0 F1
Layer Below Below Type As Rock or Integral Integral
No. Pile Head Grnd Surf Layer is Below for Layer for Layer
meters meters Above Rock Layer kN kN
----- ---------- ---------- ---------- ---------- ---------- ----------
1 0.00 0.00 N.A. No 0.00 17.2034
2 0.9000 0.9000 Yes No 17.2034 261.6718
3 2.2000 2.1702 No No 278.8751 N.A.

Notes: The F0 integral of Layer n+1 equals the sum of the F0 and F1 integrals
for Layer n. Layering correction equivalent depths are computed only
for soil types with both shallow-depth and deep-depth expressions for
peak lateral load transfer. These soil types are soft and stiff clays,
 non-liquefied sands, and cemented c-phi soil.

--------------------------------------------------------------------------------
Computed Values of Pile Loading and Deflection
for Lateral Loading for Load Case Number 1
--------------------------------------------------------------------------------

Pile-head conditions are Shear and Moment (Loading Type 1)

Shear force at pile head = 4.124 kN

Applied moment at pile head = 7.044 kN-m
Axial thrust load on pile head = 11.289 kN

Depth Deflect. Bending Shear Slope Total Bending Soil

Res. Soil Spr. Distrib.
X y Moment Force S Stress Stiffness p
Es*h Lat. Load
meters meters kN-m kN radians kPa* kN-m^2
kN/m kN/m kN/m
---------- ---------- ---------- ---------- ---------- ---------- ----------
---------- ---------- ----------
0.00 0.05504 7.0440 4.1240 -0.09941 8.03E+08 90.8437
0.00 0.00 0.00
0.02300 0.05277 7.1644 4.1180 -0.09761 8.16E+08 90.8437
-0.5247 0.2287 0.00
0.04600 0.05055 7.2841 4.0985 -0.09578 8.30E+08 90.8437
-1.1641 0.5296 0.00
0.06900 0.04837 7.4027 4.0635 -0.09392 8.43E+08 90.8437
-1.8807 0.8943 0.00
0.09200 0.04623 7.5198 4.0115 -0.09203 8.57E+08 90.8437
-2.6394 1.3131 0.00
0.1150 0.04414 7.6350 3.9419 -0.09012 8.70E+08 90.8437
-3.4141 1.7792 0.00
0.1380 0.04209 7.7479 3.8546 -0.08817 8.83E+08 90.8437
-4.1785 2.2836 0.00
0.1610 0.04008 7.8581 3.7501 -0.08619 8.95E+08 90.8437
-4.9135 2.8196 0.00
0.1840 0.03812 7.9652 3.6284 -0.08419 9.08E+08 90.8437
-5.6625 3.4165 0.00
0.2070 0.03621 8.0688 3.4903 -0.08216 9.19E+08 90.8437
-6.3456 4.0310 0.00
0.2300 0.03434 8.1684 3.3369 -0.08010 9.31E+08 90.8437
-7.0016 4.6894 0.00
0.2530 0.03252 8.2638 3.1693 -0.07802 9.42E+08 90.8437
-7.5663 5.3510 0.00
0.2760 0.03075 8.3547 2.9882 -0.07592 9.52E+08 90.8437
-8.1843 6.1212 0.00
0.2990 0.02903 8.4407 2.7929 -0.07379 9.62E+08 90.8437
-8.7995 6.9717 0.00
0.3220 0.02736 8.5215 2.5826 -0.07165 9.71E+08 90.8437
-9.4868 7.9758 0.00
0.3450 0.02573 8.5967 2.3545 -0.06948 9.80E+08 90.8437
-10.3473 9.2479 0.00
0.3680 0.02416 8.6659 2.1068 -0.06729 9.87E+08 90.8437
-11.1927 10.6548 0.00
0.3910 0.02264 8.7286 1.8399 -0.06509 9.95E+08 90.8437
-12.0158 12.2076 0.00
0.4140 0.02117 8.7843 1.5544 -0.06288 1.00E+09 90.8437
-12.8090 13.9183 0.00
0.4370 0.01975 8.8327 1.2460 -0.06065 1.01E+09 90.8437
-14.0043 16.3117 0.00
0.4600 0.01838 8.8732 0.9092 -0.05840 1.01E+09 90.8437
-15.2892 19.1352 0.00
0.4830 0.01706 8.9049 0.5422 -0.05615 1.01E+09 90.8437
-16.6225 22.4104 0.00
0.5060 0.01579 8.9273 0.1440 -0.05390 1.02E+09 90.8437
-18.0032 26.2168 0.00
0.5290 0.01458 8.9395 -0.2869 -0.05163 1.02E+09 90.8437
-19.4680 30.7095 0.00
0.5520 0.01342 8.9409 -0.7529 -0.04937 1.02E+09 90.8437
-21.0496 36.0785 0.00
0.5750 0.01231 8.9305 -1.2559 -0.04711 1.02E+09 90.8437
-22.6924 42.3999 0.00
0.5980 0.01125 8.9076 -1.7974 -0.04485 1.01E+09 90.8437
-24.3964 49.8679 0.00
0.6210 0.01025 8.8711 -2.3789 -0.04260 1.01E+09 90.8437
-26.1618 58.7246 0.00
0.6440 0.00929 8.8203 -3.0016 -0.04036 1.01E+09 90.8437
-27.9883 69.2742 0.00
0.6670 0.00839 8.7540 -3.6670 -0.03814 9.97E+08 90.8437
-29.8762 81.9021 0.00
0.6900 0.00754 8.6714 -4.3766 -0.03593 9.88E+08 90.8437
-31.8253 97.1017 0.00
0.7130 0.00674 8.5713 -5.1317 -0.03375 9.77E+08 90.8437
-33.8357 115.5113 0.00
0.7360 0.00599 8.4528 -5.9337 -0.03159 9.63E+08 90.8437
-35.9073 137.9674 0.00
0.7590 0.00528 8.3148 -6.7841 -0.02947 9.47E+08 90.8437
-38.0402 165.5807 0.00
0.7820 0.00463 8.1561 -7.6843 -0.02738 9.29E+08 90.8437
-40.2344 199.8508 0.00
0.8050 0.00402 7.9755 -8.6356 -0.02534 9.09E+08 90.8437
-42.4898 242.8392 0.00
0.8280 0.00346 7.7720 -9.5947 -0.02335 8.86E+08 90.8437
-40.9100 271.5761 0.00
0.8510 0.00295 7.5463 -10.5050 -0.02141 8.60E+08 90.8437
-38.2455 298.1521 0.00
0.8740 0.00248 7.2999 -11.3539 -0.01953 8.32E+08 90.8437
-35.5714 329.9101 0.00
0.8970 0.00205 7.0342 -12.1416 -0.01771 8.01E+08 90.8437
-32.9197 368.9882 0.00
0.9200 0.00167 6.7506 -12.9350 -0.01597 7.69E+08 90.8437
-36.0732 498.3052 0.00
0.9430 0.00132 6.4474 -13.7285 -0.01430 7.35E+08 90.8437
-32.9293 574.9190 0.00
0.9660 0.00101 6.1265 -14.4453 -0.01271 6.98E+08 90.8437
-29.4026 671.3929 0.00
0.9890 7.33E-04 5.7896 -15.0760 -0.01120 6.60E+08 90.8437
-25.4412 798.4887 0.00
1.0120 4.92E-04 5.4388 -15.6094 -0.00978 6.20E+08 90.8437
-20.9421 978.8010 0.00
1.0350 2.83E-04 5.0766 -16.0305 -0.00845 5.78E+08 90.8437
-15.6724 1273. 0.00
1.0580 1.04E-04 4.7058 -16.2990 -0.00721 5.36E+08 90.8437
-7.6799 1706. 0.00
 1.0810 -4.85E-05 4.3306 -16.3451 -0.00606 4.93E+08 90.8437
3.6756 1743. 0.00
1.1040 -1.75E-04 3.9571 -16.1490 -0.00501 4.51E+08 90.8437
13.3801 1755. 0.00
1.1270 -2.79E-04 3.5903 -15.7821 -0.00406 4.09E+08 90.8437
18.5208 1526. 0.00
1.1500 -3.62E-04 3.2332 -15.3091 -0.00320 3.68E+08 90.8437
22.6127 1436. 0.00
1.1730 -4.26E-04 2.8878 -14.7500 -0.00242 3.29E+08 90.8437
26.0039 1403. 0.00
1.1960 -4.73E-04 2.5559 -14.1192 -0.00173 2.91E+08 90.8437
28.8480 1401. 0.00
1.2190 -5.06E-04 2.2392 -13.4283 -0.00112 2.55E+08 90.8437
31.2284 1420. 0.00
1.2420 -5.25E-04 1.9388 -12.6874 -5.96E-04 2.21E+08 90.8437
33.1967 1454. 0.00
1.2650 -5.33E-04 1.6559 -11.9056 -1.41E-04 1.89E+08 90.8437
34.7884 1500. 0.00
1.2880 -5.32E-04 1.3912 -11.0912 2.45E-04 1.59E+08 90.8437
36.0300 1559. 0.00
1.3110 -5.22E-04 1.1456 -10.2520 5.66E-04 1.31E+08 90.8437
36.9430 1628. 0.00
1.3340 -5.06E-04 0.9194 -9.3953 8.28E-04 1.05E+08 90.8437
37.5462 1708. 0.00
1.3570 -4.84E-04 0.7130 -8.5282 0.00103 8.12E+07 90.8437
37.8571 1799. 0.00
1.3800 -4.58E-04 0.5265 -7.6571 0.00119 6.00E+07 90.8437
37.8923 1903. 0.00
1.4030 -4.29E-04 0.3601 -6.7881 0.00130 4.10E+07 90.8437
37.6685 2019. 0.00
1.4260 -3.98E-04 0.2136 -5.9271 0.00138 2.43E+07 90.8437
37.2024 2149. 0.00
1.4490 -3.66E-04 0.08675 -5.0794 0.00141 9885679. 90.8437
36.5109 2295. 0.00
1.4720 -3.33E-04 -0.02079 -4.2644 0.00142 2370347. 90.8437
34.3615 2373. 0.00
1.4950 -3.00E-04 -0.1102 -3.5072 0.00141 1.26E+07 90.8437
31.4769 2410. 0.00
1.5180 -2.68E-04 -0.1829 -2.8169 0.00137 2.08E+07 90.8437
28.5553 2447. 0.00
1.5410 -2.37E-04 -0.2404 -2.1936 0.00132 2.74E+07 90.8437
25.6455 2484. 0.00
1.5640 -2.08E-04 -0.2844 -1.6366 0.00125 3.24E+07 90.8437
22.7893 2521. 0.00
1.5870 -1.80E-04 -0.3164 -1.1442 0.00117 3.60E+07 90.8437
20.0222 2558. 0.00
1.6100 -1.54E-04 -0.3377 -0.7142 0.00109 3.85E+07 90.8437
17.3730 2595. 0.00
1.6330 -1.30E-04 -0.3498 -0.3435 0.00100 3.99E+07 90.8437
14.8649 2632. 0.00
1.6560 -1.08E-04 -0.3540 -0.02858 9.14E-04 4.03E+07 90.8437
12.5155 2669. 0.00
1.6790 -8.78E-05 -0.3516 0.2342 8.24E-04 4.01E+07 90.8437
10.3377 2707. 0.00
1.7020 -6.99E-05 -0.3437 0.4490 7.36E-04 3.92E+07 90.8437
8.3396 2744. 0.00
1.7250 -5.40E-05 -0.3313 0.6200 6.51E-04 3.78E+07 90.8437
6.5257 2781. 0.00
1.7480 -4.00E-05 -0.3155 0.7513 5.69E-04 3.59E+07 90.8437
4.8968 2818. 0.00
1.7710 -2.78E-05 -0.2970 0.8473 4.91E-04 3.38E+07 90.8437
3.4507 2855. 0.00
1.7940 -1.74E-05 -0.2768 0.9121 4.19E-04 3.15E+07 90.8437
2.1829 2892. 0.00
1.8170 -8.53E-06 -0.2553 0.9497 3.52E-04 2.91E+07 90.8437
1.0866 2929. 0.00
1.8400 -1.19E-06 -0.2333 0.9640 2.90E-04 2.66E+07 90.8437
0.1537 2966. 0.00
1.8630 4.79E-06 -0.2111 0.9585 2.33E-04 2.41E+07 90.8437
-0.6256 3003. 0.00
1.8860 9.54E-06 -0.1893 0.9368 1.83E-04 2.16E+07 90.8437
-1.2617 3040. 0.00
1.9090 1.32E-05 -0.1681 0.9020 1.37E-04 1.92E+07 90.8437
-1.7656 3077. 0.00
1.9320 1.59E-05 -0.1479 0.8570 9.75E-05 1.68E+07 90.8437
-2.1488 3114. 0.00
1.9550 1.77E-05 -0.1287 0.8044 6.25E-05 1.47E+07 90.8437
-2.4226 3151. 0.00
1.9780 1.87E-05 -0.1109 0.7467 3.21E-05 1.26E+07 90.8437
-2.5983 3189. 0.00
2.0010 1.92E-05 -0.09441 0.6859 6.14E-06 1.08E+07 90.8437
-2.6868 3226. 0.00
2.0240 1.90E-05 -0.07934 0.6240 -1.59E-05 9041347. 90.8437
-2.6987 3263. 0.00
2.0470 1.84E-05 -0.06569 0.5625 -3.42E-05 7486641. 90.8437
-2.6440 3300. 0.00
2.0700 1.75E-05 -0.05344 0.5030 -4.93E-05 6090808. 90.8437
-2.5317 3337. 0.00
2.0930 1.62E-05 -0.04253 0.4466 -6.14E-05 4847178. 90.8437
-2.3707 3374. 0.00
2.1160 1.46E-05 -0.03287 0.3944 -7.10E-05 3746126. 90.8437
-2.1688 3411. 0.00
2.1390 1.29E-05 -0.02435 0.3473 -7.82E-05 2775554. 90.8437
-1.9333 3448. 0.00
2.1620 1.10E-05 -0.01685 0.3058 -8.34E-05 1921327. 90.8437
-1.6706 3485. 0.00
2.1850 9.06E-06 -0.01024 0.2707 -8.69E-05 1167674. 90.8437
-1.3870 3522. 0.00
2.2080 7.03E-06 -0.00435 0.1962 -8.87E-05 497544. 90.8437
-5.0910 16659. 0.00
2.2310 4.98E-06 -0.00117 0.09574 -8.94E-05 134245. 90.8437
-3.6418 16835. 0.00
2.2540 2.92E-06 9.55E-05 0.02906 -8.96E-05 12208. 90.8437
-2.1562 17011. 0.00
2.2770 8.56E-07 2.17E-04 -0.00309 -8.95E-05 26041. 90.8437
-0.6394 17187. 0.00
2.3000 -1.20E-06 0.00 0.00 -8.95E-05 1328. 90.8437
0.9078 8681. 0.00

* This analysis computed pile response using nonlinear moment-curvature rela-

tionships. Values of total stress due to combined axial and bending stresses
are computed only for elastic sections only and do not equal the actual
stresses in concrete and steel. Stresses in concrete and steel may be inter-
polated from the output for nonlinear bending properties relative to the
magnitude of bending moment developed in the pile.

Output Summary for Load Case No. 1:

Pile-head deflection = 0.05504090 meters
Computed slope at pile head = -0.09940967 radians
Maximum bending moment = 8.94086621 kN-m
Maximum shear force = -16.34509255 kN
Depth of maximum bending moment = 0.55200000 meters below pile head
Depth of maximum shear force = 1.08100000 meters below pile head
Number of iterations = 23
Number of zero deflection points = 3

--------------------------------------------------------------------------------
Summary of Pile-head Responses for Conventional Analyses
--------------------------------------------------------------------------------

Definitions of Pile-head Loading Conditions:

Load Type 1: Load 1 = Shear, V, kN, and Load 2 = Moment, M, kN-m

Load Type 2: Load 1 = Shear, V, kN, and Load 2 = Slope, S, radians
Load Type 3: Load 1 = Shear, V, kN, and Load 2 = Rot. Stiffness, R, kN-m/rad.
Load Type 4: Load 1 = Top Deflection, y, m, and Load 2 = Moment, M, kN-m
Load Type 5: Load 1 = Top Deflection, y, m, and Load 2 = Slope, S, radians

Load Load Load Axial Pile-head Pile-head Max

Shear Max Moment
Case Type Pile-head Type Pile-head Loading Deflection Rotation in
Pile in Pile
No. 1 Load 1 2 Load 2 kN meters radians kN
kN-m
---- ----- ---------- ---------- ---------- ---------- ---------- ----------
---------- ----------
1 V, kN 4.1240 M, kN-m 7.0440 11.2890 0.05504 -0.09941
-16.3451 8.9409

Maximum pile-head deflection = 0.0550408975 meters

Maximum pile-head rotation = -0.0994096667 radians = -5.695754 deg.

The analysis ended normally.