Scribd
Upload
143 views

ZOSI VIEW - PC - Client - Introduction

1. The document provides instructions for installing, logging in, registering, password retrieval, main interface navigation, adding devices, alarm settings, and remote and local video playback for the ZOSI VIEW_PC_Client software. 2. Key functions covered include logging in with an existing account or registering a new one, navigating the software interface including the device list, live view screens, and playback controls, adding devices either through automatic search or manual entry, setting alarm push notifications, and playing back remote surveillance videos stored on DVRs or local videos captured on the PC. 3. The instructions include screenshots to illustrate each step in the software usage and configuration process.

Uploaded by

Lishan Xie
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
143 views

ZOSI VIEW - PC - Client - Introduction

1. The document provides instructions for installing, logging in, registering, password retrieval, main interface navigation, adding devices, alarm settings, and remote and local video playback for the ZOSI VIEW_PC_Client software. 2. Key functions covered include logging in with an existing account or registering a new one, navigating the software interface including the device list, live view screens, and playback controls, adding devices either through automatic search or manual entry, setting alarm push notifications, and playing back remote surveillance videos stored on DVRs or local videos captured on the PC. 3. The instructions include screenshots to illustrate each step in the software usage and configuration process.

Uploaded by

Lishan Xie
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 15

ZOSI VIEW_PC_Client_

Introduction
1、Install
Double-click to open the installation file, pop up following the installation wizard (The
version number may be different, but not influence use)

Click "next" until the following interface, click the "install"

After the installation of software, pop-up window as follows:

Click "finish"
2、Using the software

2.1 Login

Start the application, the program into the landing interface, as shown in P2-1

P2-1 Login
Enter account and password to log in. If the user does not have the account, you can apply for
to register. And local login is permitted.
Note: The account and password that you apply for on PC to register is the same with you
use your mobile apply for.
2.2 Register

Clicks the "register" on the login interface, enter the registration screen, as shown in P2-2.

P2-2 Register
With * is required, fill in and then click the "register".

2.3 Password lost

If users have account, but forget the login password. You can through the e-mail to retrieve
password. Click “Password lost”, enter the following interface

图 2-3 Password lost


Mail QueryL: Check the reserved E-mail information when registering.
Retrieve Password: System will send an email to the email, according to the prompt to reset
the login password

2.4 Main Interface

After the success of the user login, enter the main interface, as shown in P2-4.
P2-4 main interface
Main interface is divided into four parts, including at the top of the navigation bar(P2-5), he
left menu bar - device list and function(P2-6), in the middle of the play rect(P2-7), And at the
bottom of the play controls(P2-8)

P2-5 Navigation bar


P2-6 Device list and function

P2-7 The play rect

P2-8 Play controls


The description of each icon function as the following:
icon function description icon function description
Directory: For equipment The local video, select a live preview
management, classification of screen to start the video. Video files
grouping and operation saved on your PC.
equipment ： Multi-channel DVR,
Local snap, select a live preview
NVR, etc.
screen starts to capture. The snap
If the corresponding equipment
images stored on your local PC.
don't online icon as grey
Camera：The IPC or a channel, etc，
Talkback, real-time two –way
If the corresponding camera don't
intercom
online icon as grey
Single picture full-screen playback,
Monitoring, one-way receive the
can also double-click on the play form
playback audio
in full-screen playback
64 split-screens, support 1、4、9、16、
Turn off the live preview
25、36、49 and 64 split-screens.
full screen, picture full screen
sign out
playback.
64 split-screens, support 1、4、9、16、
help, click to open help page
25、36、49 and 64 split-screens.
Page up Page down

2.5 Control panel

Picture 2-9 control panel

Screen locking: Lock the screen, in the lock case is not able to do any operation in current
interface apart from unlocking.
Log off: logout the client
Playback: to playback the remote video and local video
Photos: view local images save by capture
Password Correcting: modify the user logon password
Alarm Settings: set the front-end device booted and alarm monitoring types
Device Searching: search all device which in LAN
DeviceAdministration: for operation such as rename, add, delete a device.

2.6 Add the Device

2.6.1 Quick Add

“Control Panel” ->” Device Searching”, then pop up the device searching interface, as
shown in P2-10
P2-10 search the device

Select out a device is searched, and then click “add to the list” filling device login ID and
password, as showed in P2-11

P2-11 add a device to lists

Parent directory: add the camera to specific catalogue


Scene name: add to the display name of the user to the device lists.
Username: login username of the device
Password: the login password of the device
Channel NO: view what channel number, start from 1. Completed IPC as 1
Streaming: request to a front- end device stream format while live preview, default is sub stream.
Fulfill the above information: after finished, click “add” button

P2-12

2.6.2Add the device manually

“Control the panel” ->”Device management”, then pop up the device management interface,
as shown in P2-13

P2-13 device management


Firstly, select a directory from the device list box, then click “add the cameras” enter the added
interface like the following figure:
P2-14 add cameras
Device name: the display name that you add to the user device list, more convenient to
people identify (such as living room)
Device type: lens (the channel of the IPC, DVR\NVR), device (such as DVR\NVR)
Connection modes: (IP address and port access mode), P2P (cloud- penetration mode)
Protocol: select the front-end device protocol
Cloud ID: front-end device ID to identify the device, P2P mode exclusive.
Username: the login username of device
Password: device login password
Channel NO: view what channel number, start from 1. Completed IPC as 1 (if it is the device
type, it is the channel number mean: complete 8 if is 8Channel DVR)
Stream: request to a front- end device stream format while live preview, 0 is main stream,1 is
sub stream, default is sub stream.

Note: You can look for your DVR’s serial ID on the device just do the step :Main menu→

information→system→Serial ID, just as the below picture


2.7 Alarm setting

“Control the panel” ->”alarm configuration”, then pop up the alarm setting interface, as
shown in P2-15

P2-15 alarm setting


Guard: start 4 alarm types monitoring which you tick
Unguard: cancel all alarm types monitoring
PC Push: after booting and the related equipment alarm is triggered, the server will push the
information to the PC client and prompt the user
Add number: add SMS notice number
Delete number: delete SMS notice number
Turn off the alarm: turn off the alarm, which the PC client is no longer to prompt the push
information of device trigger alarm
Open the alarm: turn on the alarm, which the Pc client will prompt the push information of
device trigger alarm.
View the alarm information: after starting current PC to view all alarms push messages.

2.8Video playback

2.8.1 Remote video playback

“Control the panel” ->”video playback”, then pop up the video select operation interface, (as
shown in P2-16), select “remote video” then into remote video playback interface, as show in
P2-17

video types select


P2-17 remote video playback
Select a device and set up the query time then click it to acquire the relevant video
information. as shown in P2-18

P2-18 remote video lists

Double click a video to play in the video lists (as follows), double click the playing interface
can be full screen.
P2-19 remote video playback

2.8.2 Local video

“Control the panel” ->”video playback” -> “local video”, then pop up the local video interface,
(as following:

Select the local video date that need to view. Query the related video and double click to play.

You might also like