0% found this document useful (0 votes)
165 views

FN Module2 Fluid Statics Bouyancy

1. Archimedes' principle states that any object immersed in a fluid experiences an upward buoyant force equal to the weight of the fluid displaced by the object. 2. Four examples are given to demonstrate calculations of volume, specific gravity, weight, and determining composition using buoyancy and density. 3. The last example calculates the weight of lead needed to be attached to a submerged wooden block to achieve neutral buoyancy with 30 cm above the water.
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
165 views

FN Module2 Fluid Statics Bouyancy

1. Archimedes' principle states that any object immersed in a fluid experiences an upward buoyant force equal to the weight of the fluid displaced by the object. 2. Four examples are given to demonstrate calculations of volume, specific gravity, weight, and determining composition using buoyancy and density. 3. The last example calculates the weight of lead needed to be attached to a submerged wooden block to achieve neutral buoyancy with 30 cm above the water.
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

ENGGPHYS: FN-MODULE-2 P.

3 1

BOUYANCY
ARCHIMEDES’ PRINCIPLE
A principle discovered by the Greek scientist Archimedes that states that
“any body immersed in a fluid is acted upon by an upward force (buoyant force) equal to the weight of
the displaced fluid.”

Wbody
Wbody

BF BF

Partially displaced/submerged body Fully displaced/submerged body

𝑇𝑎𝑘𝑖𝑛𝑔 𝑠𝑢𝑚𝑚𝑎𝑡𝑖𝑜𝑛 𝑜𝑓 𝑣𝑒𝑟𝑡𝑖𝑐𝑎𝑙 𝑓𝑜𝑟𝑐𝑒𝑠 𝑒𝑞𝑢𝑎𝑙 𝑡𝑜 𝑧𝑒𝑟𝑜:


∑ 𝐹𝑦 = 0
𝑾𝒃𝒐𝒅𝒚 = 𝑩𝑭

𝑤ℎ𝑒𝑟𝑒𝑖𝑛,
𝑩𝑭 = 𝜸𝒍𝒊𝒒𝒖𝒊𝒅 𝑽𝑫 & 𝑾 = 𝜸𝒃𝒐𝒅𝒚 𝑽𝒃𝒐𝒅𝒚

where:
Wobject = total weight of the body/object
BF = buoyant force – the net upward force acting on the body
γ = specific weight of fluid
VD = Volume displaced/submerged (volume of body below the liquid’s surface

For homogeneous body floating on a homogeneous liquid, the volume displaced is:
𝜸𝒃𝒐𝒅𝒚 𝑺𝑮𝒃𝒐𝒅𝒚
𝑽𝑫 = 𝑽= 𝑽
𝜸𝒍𝒊𝒒𝒖𝒊𝒅 𝑺𝑮𝒍𝒊𝒒𝒖𝒊𝒅

Sample Problems:

1. A stone weighs 105 lb in air. When submerged in water, it weighs 67 lb. Find the
stone’s:
a. volume, and
b. specific gravity.

Given: Weight of stone = 105 lb

Eden
ENGGPHYS: FN-MODULE-2 P.3 2

Weight of stone in water = 67 lb

Sol’n:
Bouyant Force, BF = 105 lb – 67 lb
BF = 38 lb

a) 𝐵𝐹 = 𝛾𝑉𝐷
𝐵𝐹 = 𝛾𝑤𝑎𝑡𝑒𝑟 𝑉𝑠𝑡𝑜𝑛𝑒
𝑙𝑏
38 𝑙𝑏 = 62.4 (𝑉𝑠𝑡𝑜𝑛𝑒 )
𝑓𝑡 3

𝑽𝒔𝒕𝒐𝒏𝒆 = 𝟎. 𝟔𝟎𝟗 𝒇𝒕𝟑

𝑊𝑠𝑡𝑜𝑛𝑒
b) 𝛾𝑠𝑡𝑜𝑛𝑒 = 𝑉𝑠𝑡𝑜𝑛𝑒
105 𝑙𝑏
𝛾𝑠𝑡𝑜𝑛𝑒 = 0.609 𝑓𝑡 3
𝜸𝒔𝒕𝒐𝒏𝒆 = 𝟏𝟕𝟐. 𝟒𝟏𝟒 𝒍𝒃/𝒇𝒕𝟑

𝛾𝑠𝑡𝑜𝑛𝑒
𝑆𝐺𝑠𝑡𝑜𝑛𝑒 = 𝛾𝑤𝑎𝑡𝑒𝑟
172.414 𝑙𝑏/𝑓𝑡 3
𝑆𝐺𝑠𝑡𝑜𝑛𝑒 = 62.4 𝑙𝑏/𝑓𝑡 3
𝑺𝑮𝒔𝒕𝒐𝒏𝒆 = 𝟐. 𝟕𝟔𝟑

2. The can in the figure floats in the position shown. What is its weight in N?

3 cm
Given: Water
γ = 9810 N/m3
SG = 1
8 cm D = 9 cm
Water
Height submerged = 8 cm
Height above the water = 3 cm
D = 9 cm Length of can = 11 cm

Req’d: Weight in N = ?
Wcan

Sol’n: 3 cm

𝑊 = 𝐵𝐹
𝑊 = 𝛾𝑉𝐷
𝜋 8 cm
𝑊 = (𝛾) [( 4 𝐷 2 ) (ℎ 𝑠𝑢𝑏𝑚𝑒𝑟𝑔𝑒𝑑)] Water

𝑁 𝜋
𝑊= (9810 𝑚3 ) ( 4 ) (0.09 𝑚)2 (0.08 𝑚)
D = 9 cm
𝑾 = 𝟒. 𝟗𝟗𝟑 𝑵
BF

Eden
ENGGPHYS: FN-MODULE-2 P.3 3

3. An iceberg has specific gravity of 0.9 when floating in sea water (sp. gr. = 1.03). If the
volume of the ice above the water surface is 1000 cu. m., what is the total volume of
the ice?
Wice
Given: SGice = 0.9 Iceberg, SG = 0.92

SGseawater = 1.03
Vexposed = 1000 m3
Vexposed = 1000 m3
VD = Vice – 1000
Vsubmerged

Req’d: Vice = ?

Seawater, 1.03
Sol’n:
BF
𝑊 = 𝐵𝐹
𝛾𝑖𝑐𝑒 𝑉 = 𝛾𝑆𝑊 𝑉𝐷
𝑘𝑁 𝑘𝑁
0.92 (9.81 ) (𝑉𝑖𝑐𝑒 ) = 1.03 (9.81 ) (𝑉𝑖𝑐𝑒 − 1000𝑚3 )
𝑚3 𝑚3
𝑽𝒊𝒄𝒆 = 𝟗𝟑𝟔𝟑. 𝟔𝟑𝟔 𝒎𝟑

4. Archimedes, when asked by King Hiero if the new crown was pure gold (SG = 19.3),
found the crown weight in air to be 11.8 N and in water to be 10.9 N. Was it gold?

Given: SGgold = 19.3


Wcrown = 11.8 N
Wcrown in water = 10.9 N

Req’d: Is the crown made of gold?

Sol’n:
To check if the crown is made of gold, our condition should be:
𝑆𝐺𝑐𝑟𝑜𝑤𝑛 = 𝑆𝐺𝑔𝑜𝑙𝑑

𝐵𝐹 = 𝑤𝑒𝑖𝑔ℎ𝑡 𝑜𝑓 𝑐𝑟𝑜𝑤𝑛 − 𝑤𝑒𝑖𝑔ℎ𝑡 𝑜𝑓 𝑐𝑟𝑜𝑤𝑛 𝑖𝑛 𝑤𝑎𝑡𝑒𝑟


𝐵𝐹 = 11.8 𝑁 − 10.9 𝑁
𝑩𝑭 = 𝟎. 𝟗 𝑵

𝐵𝐹 = 𝛾𝑤𝑎𝑡𝑒𝑟 𝑉𝐷
𝑉𝐷 = 𝑉𝑐𝑟𝑜𝑤𝑛 (crown fully submerged)
0.9 𝑁 = 9810 𝑁/𝑚3 (𝑉𝑐𝑟𝑜𝑤𝑛 )
𝑽𝒄𝒓𝒐𝒘𝒏 = 𝟗. 𝟏𝟕𝟒𝟑𝟏 𝒙 𝟏𝟎−𝟓 𝒎𝟑

𝑊 = 11.8 𝑁
𝛾𝑐𝑟𝑜𝑤𝑛 𝑉𝑐𝑟𝑜𝑤𝑛 = 11.8 𝑁
𝑁
𝑆𝐺𝑐𝑟𝑜𝑤𝑛 (9810 𝑚3 ) (9.17431 𝑥 10−5 𝑚3 ) = 11.8 𝑁
𝑺𝑮𝒄𝒓𝒐𝒘𝒏 = 𝟏𝟑. 𝟏𝟏𝟏 ∴ 𝑪𝒓𝒐𝒘𝒏 𝒊𝒔 𝒏𝒐𝒕 𝒈𝒐𝒍𝒅.

Eden
ENGGPHYS: FN-MODULE-2 P.3 4

5. A piece of yellow pine wood (SG=0.65) is 5 cm by 5 cm square and 2.2 m long. How
many newtons of lead (SG = 11.4) should be attached to submerged end of the wood
so that it will float vertically with 30 cm out of the water?
Given: SGwood = 0.65
5 cm SGlead = 11.4
5 cm Lwood = 2.2 m
Lwood exposed = 0.3 m
0.3 m
Req’d: Wlead in N = ?
Wood

Water
2.2m
SG = 1

Lead

Sol’n:
Wwood
5 cm By taking the summation of the vertical forces, we
have:
5 cm 𝑊𝑤𝑜𝑜𝑑 + 𝑊𝑙𝑒𝑎𝑑 = 𝐵𝐹𝑤𝑜𝑜𝑑 + 𝐵𝐹𝑙𝑒𝑎𝑑
0.3 m
𝑊𝑤𝑜𝑜𝑑 = 𝛾𝑉
𝑁
𝑊𝑤𝑜𝑜𝑑 = 0.65 (9810 𝑚3 ) (0.05 𝑐𝑚)(0.05 𝑐𝑚)(2.2 𝑚)
Wood

𝑾𝒘𝒐𝒐𝒅 = 𝟑𝟓. 𝟎𝟕𝟎𝟕𝟓 𝑵

2.2m 2.2m – 0.3 m 𝑁


= 1.9 m
𝑊𝑙𝑒𝑎𝑑 = 11.4 (9810 𝑚3 ) (𝑉𝑙𝑒𝑎𝑑 )
BFwood
𝑾𝒍𝒆𝒂𝒅 = 𝟏𝟏𝟏𝟖𝟑𝟒 (𝑽𝒍𝒆𝒂𝒅 )
Wlead

𝐵𝐹𝑤𝑜𝑜𝑑 = 𝛾𝑤𝑎𝑡𝑒𝑟 𝑉𝐷
𝑁
Lead 𝐵𝐹𝑤𝑜𝑜𝑑 = (9810 𝑚3 ) (0.05 𝑐𝑚)(0.05 𝑐𝑚)(1.9 𝑚)
𝑩𝑭𝒘𝒐𝒐𝒅 = 𝟒𝟔. 𝟓𝟗𝟕𝟓 𝑵
BFlead

𝐵𝐹𝑙𝑒𝑎𝑑 = 𝛾𝑤𝑎𝑡𝑒𝑟 𝑉𝐷

Eden
ENGGPHYS: FN-MODULE-2 P.3 5

𝑤ℎ𝑒𝑟𝑒𝑖𝑛, 𝑉𝐷 𝑜𝑓 𝑙𝑒𝑎𝑑 = 𝑉𝑙𝑒𝑎𝑑 𝑏𝑒𝑐𝑎𝑢𝑠𝑒 𝑙𝑒𝑎𝑑 𝑖𝑠 𝑓𝑢𝑙𝑙𝑦 𝑠𝑢𝑏𝑚𝑒𝑟𝑔𝑒𝑑


𝐵𝐹𝑙𝑒𝑎𝑑 = 𝛾𝑤𝑎𝑡𝑒𝑟 𝑉𝑙𝑒𝑎𝑑
𝑵
𝑩𝑭𝒍𝒆𝒂𝒅 = (𝟗𝟖𝟏𝟎 𝒎𝟑) 𝑽𝒍𝒆𝒂𝒅

𝑠𝑢𝑏𝑠𝑡𝑖𝑡𝑢𝑡𝑒 𝑎𝑙𝑙 𝑣𝑎𝑙𝑢𝑒𝑠:


𝑊𝑤𝑜𝑜𝑑 + 𝑊𝑙𝑒𝑎𝑑 = 𝐵𝐹𝑤𝑜𝑜𝑑 + 𝐵𝐹𝑙𝑒𝑎𝑑
𝑁
35.07075 𝑁 + 111834 (𝑉𝑙𝑒𝑎𝑑 ) = 46.5975 𝑁 + (9810 𝑚3 ) 𝑉𝑙𝑒𝑎𝑑
𝑁
111834 (𝑉𝑙𝑒𝑎𝑑 ) − (9810 𝑚3 ) 𝑉𝑙𝑒𝑎𝑑 = 46.5975 𝑁 − 35.07075 𝑁
102024 𝑁/𝑚3 (𝑉𝑙𝑒𝑎𝑑 ) = 46.5975 𝑁 − 35.07075 𝑁
𝑽𝒍𝒆𝒂𝒅 = 𝟏. 𝟏𝟐𝟗𝟖𝟏 𝒙 𝟏𝟎−𝟒 𝒎𝟑

𝑔𝑒𝑡𝑡𝑖𝑛𝑔 𝑡ℎ𝑒 𝑣𝑎𝑙𝑢𝑒 𝑜𝑓 𝑤𝑒𝑖𝑔ℎ𝑡 𝑜𝑓 𝑙𝑒𝑎𝑑:


𝑊𝑙𝑒𝑎𝑑 = 𝛾𝑙𝑒𝑎𝑑 𝑉𝑙𝑒𝑎𝑑
𝑁
𝑊𝑙𝑒𝑎𝑑 = 11.4 (9810 ) (𝑉𝑙𝑒𝑎𝑑 )
𝑚3
−4
𝑊𝑙𝑒𝑎𝑑 = 111834 (1.12981 𝑥 10 𝑚3 )
𝑾𝒍𝒆𝒂𝒅 = 𝟏𝟐. 𝟔𝟑𝟓 𝑵

Eden

You might also like