Scribd
Upload
2K views166 pages

Kataria's Steel Tables

Kataria's Steel Tables

Uploaded by

Amaresh Choudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
2K views166 pages

Kataria's Steel Tables

Kataria's Steel Tables

Uploaded by

Amaresh Choudhary
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 166
) | ! | | STEEL | TABLES (MKS & S.I. UNITS) S. Verant R Soed, PUBLISHERS & BOOKSELLERS 6, Guru Nanak Market, Nai Sarak, Delhi-110006 Phone ; ; 3937396 10, i 2, 13. 14. Is, 16. V0. CONTEN’ Prefitce Symbols, Tables Round Bars Squate Bars Strips Mild Steet Flats (Cross sectional area) Mild Steel Flats (Weight) Plates (Surface area) lates (Weights of $ mm plates) Plates (Weights of 6 mm plates) Plates (Weights of 8 mm plates) Plates (Weights of 10 mm plates) Plates (Weights of 12 mm plates) Plates (Weights of 14 mm plates) Plates (Weights of 18 mm plates) Plates (Weights of 22 mm plates) Sheets Rolled steel angles equal in size Rolled steel angles unequal in size 18. Rolled steet we bars 1 Rolled steel beams 29° Rolled steel channels au 22, 23, 24. 25. 26 27. 28, 29. 30. ‘Areas of Round Bars in per metre width of slabs for different spacings Areas of groups of Round Bars Reduction for area for Rivet Holes Rivet gauge distances in logs in Angles Properties of two equal Angles back to back Properties of two Unequal Angles (longer legs back to back) Properties of two Unequal Angles (shorter legs back to back) Properties of Starred Angles (two equal angles starred) Properties of Sacred Angles (two unequal angles stared) Single Joist with additional Plates on both Flanges (For using as girders) Page 10 n “4 16 ” 18 9 20 2 n 23 6 184.3) 4 30 4 38 40 44 46 a 48 135 (50) 50 sa 38 a 6 6 ‘Single Joist with Channel and Plates on both Flanges (for using as girders) 68 Single Joist with additional Plates of both Flanges (fortsing as columns) 80 Double Joists with Flanges Butting and Welded Toe to Toe (for using as columns) Double Joists Laced or Battered (for using as columns) 86 Double channels with Flanges Butting and Welded Toe to Toe (for using as columns) . Double channels Laced or Battened (for using as columns) 2 Safe loads for Single Angle struts-cqual angles (single bolted ar single riveted end connections) 101 ‘Safe loads for Single Angle struts-unequal angles (single bolted or single riveted end connections) 103, Safe loads for Single Angle Struis-Equal Angles (dauble bolted or double riveted ‘end conéctions) 10s Safe loads for Single Angle Struts-Unequal Angles (double bolted or double riveted end connections) nL |. Safe concentric loads on Rolled Steet column sections (H-Beams being used ascolumins) 115 . Safe concentric loads on Channel Sections (being used as columns) 123 ‘Moment of Inertia of two Flanges per centimetre width about the x-x axis 129 ‘Moment of Inertia of one web plate about its x-x axis BL Preferred cut sizes of Structural Timber for Roaf Tissues (3 to 20m) 132 5. Safe permissible stresses for Indian Timbers (Standard Grade) 13 . Reinforcement Percentage & Moment factor for Beams (Singly reinforced rectangular sections) Reinforcement Petcentage & Moment factor for Beams (Doubly reinfotced rectangular sections) . Reinforcement Percentage & Moment factor for Beams (Singly reinforced T-sectiohs) Recommended clear span to effective Depth ratios in beams : . Moment capacity and steel area (Singly reinforced rectangular sectiis) . Additional Moment Carrying capacity (Doubly reinforced rectangular sections) . Moment capacity (Per metre lange width of T-beam) J. Shear capacity of concrete 5. Strength of shear reinforcement (Two leg vertical stirrups 10 mm diameter) 5: Strength of shear reinforcement (Bent up bats) ‘Clear spin to effective depth ratios in stabs (Recommended values) inimum reinforcement in slabs ). Reinforcement factor for slabs (Per metre width of slabs) ‘Moment capacity (per metre width of two way slabs) Annexure I 8.1, Units for Stractoral Engineers Annexure II Conversion factors for S.1. Units ‘Annexure IM Conversion Table kgf to newtons Annexure IV Conversion table newtons to ket Annexure V_ Guidelines for detailing of memibers bls SYMBOLS Letter symbols used in this handbook shut! have the meaning assigned to them as indicated below b a B Co D Sectional area in sq cm Width of flange ‘The longer lag of an unequal angle or ‘ene of the legs in the case of an equa angle The shorter leg on an unequal angle or ‘one of the legs in the case of an equal angie The lesser of the (wo extreme fibre distances from the X-X axis, The lesser of the (wo extreme fibre distances from the Y-¥ axis, Slope of the lange Distance ofestreme fibre fromthe XX. Distance ofextreme fibre from the Y+Y" axis Rivel gange distance in the flange Rivet gauge distance in the web Ovezall dep of section Moment of inestia about the U-U axis Moment of inertia about the V-V avis Moment of inertia about the X-X avis Product ofinertia about the X-X and Y axis ‘Moment of inertia about the Y-Y axis Maximum allowable moment Radius at root ofthe flange Radius at toe of the flange Radius of gyration about the U-U axis Radius of gyration about the V-V axis y “ ta 2n YF axis U-U axis) = HV axis Radius of gyration about the X-X axis Radius of gyration about the ¥-Y axis Maximum alfowabse shear in the web ‘Thickness of anges plates. ct. ‘Mean thickness of compression ffange ‘Thickness of flange at the centre of the outstand Mean thickness of tension Stange Thickness of web Calculated weight in kg per 0.785 1) Modulus of extreme fibre of the con pression flange Modulus of section based on the dis tance of extecine fibre of the tension flange Modulus of section about the X-X ax Modulus of section about the Y-Y axij Aine parallel o the ais ofthe web the section (in the case of beams, cham ueis and fe bars) or paraltet vo the Of the longer flange (in the case tuyoqual angles and bulb angles) either flange (in the case oF equal a les) and possing throvgh the centre Eravily of the profile of the section A line passing through the centre: gravity ofthe profile of the section, a at right angles 10 the Y-Y axis. Lines passing throught the cenure of ‘gravity of the profile of the section, representing the principal axis of ti section SYMBOLS FOR TOR STEEL DESIGN TABLES A Ast Ase Ast, Asv » of bw D a Dt e iy feck Vos NOTE: Tables are given for Steel Tor 40 (f, = 415 Nimm?) and Concrete Grade M204, ‘Area of cross section of concrete ‘Area of tension reinforcement in rectangular-sections/slabs Area of compression reinforcement in rectangular section Additional area of tension reinforcement in doubly reinforced rectangular section ‘Area of stirrup Width of rectangular section Effective width of lange in T-section Width of web in T-section Overall depth of rectangular or T-section or slab Effective depth of rectangular or T-section or slab Depth of flange in T-section Effective cover for compression reinforcement Characteristic strength of see! Characteristic strength of concrete ‘Moment factor for rectangular section Moment factor for T-section or slab Moment capacity of rectangular or T-section or slab Factored (or design) moment Moment capacity along long span ‘Moment capacity along short span Percentage of tension reinforcement in rectangular or T-section or slabs Percentage of compression reinforcement in rectangular section Shear capacity of concrete Capacity of shear reinforcement ‘Angle of inclination of bent-up bars 20 N/mm) a. cs TABLE 1: Designation Diameter Cross-Sectional Weight per Perimeter ‘Area Metre ogee oar ra mm cm om IsRO. 5 5.0 020 02 20 16 IsRO. 6 60 0.28 02 20 19 ISRO 8 80 0.50 04 39 25 IsRO 10 100 079 06 59 3.1 IsRO_ 12 2 LB 09 88 38 IsRO_ 16 16 201 16 15.7 5.0 ISRO 20 20 3.4 25 245 63 ISRO 25 28 491 38, 37.3, 18 ISRO 8 28 6.16 48 471 88 1sRO 32, 32 B08 62 618 10.1 IsRO 36 36 1018 80 785 13 ISRO 40 40 1257 99 974 26 ISRO 45 45 15.90 125 126 wa IsRO_ 50 50 1964 134 ISL 15.7 1SRO 56 56 24.63 193 189.3 116 ISRO 63 6 3117 24s 2403 198 ISRO. 72 1m 39.59 a 305.1 23 ISRO 80) 80 50.26 393 387.5 Is. ISRO 90) 0 65.26 49.9 439.5 283 ISRO 100 100 7854 617 603.3 314 IsRO_ 130 He 95.03 14.6 RIB 346 IsRO_ 125 125 122.72 96.3 944.7 593 IsRO_ 140 140 153.94 1208 1185.0 44.0 ISRO 160 160 201.06 1578, 1548.0 503 ISRO 180 180 254.47 199.8. 1960.0 56.6 ISRO 200 200 31416 246.6 2419.2 628 Note : The weights per metre of bars given in the table are calculated on she basis that steet weighs 7.85 plem* or 0.077 Nien’ and are rounded off to one decimal place, Table TABLE 2: Designati Side Width Cross-Sectional Weigh per Perimeter Area Metre —_ mm em? ke N cm IssQ. 5 30 028 02 20 20 IssQ. 6 60 036 93 29 24 IssQ. 8 80 0.64 os 49 32 IssQ. 10 10.0 1.00 08 78 40 IssQ. 12 2 Las Md 108 48 IssQ_ 6 1G 2.56 20 196 6a IssQ_ 20 20 4.00 34 304 80 IssQ. 25 25 6.28 49 48.1 10.0 IssQ. 32 32 10.24 80 78S 128 IssQ. 40 40 16,00 126 123.6 160 IssQ. 50 30 25.00 196 1923 200 ISsQ 63 6 39.69 312 306.1 28.2 I8sQ 80 80 64.00 502 4925 32.0 I§sQ_ 100 100 100.00 788 70.1 40.0 Note: The weights per metre of bars given in the table are calculated on the basis that steel weighs 7.85g/em> or 0,077N/cm? and are rounded off to one decimal place. Tabland\t TABLE 3: I STRIPS Thickness} 1,60 1.80 2.00 224 2502.80 3.15 os Width ‘Weight per metre (tv) pes es ee ee ; ke oN ke oN kp oN ke N kg N ke N kg oN oo | 13 128 14 137 16 157 18 177 26 196 22 216 25 245 125 [16 157 18 17.7 20 196 22 216 24 235 27 265 31 304 160 | 20 196 23 226 25 2S 28 275 31 M4 35 HI 40 392 2 | 25 RS 28 WS FE WA FS 5LS 39 FS 44 492 49 HRI 250} 34 304 35 343 39 WRI 44 432 49 4Rd 55 50 62 O08 30 | 40 392 45 441 50 490 56 549 63 OLR 70 6&7 79 725 400 | 5.0 490 56 589 63 618 70 687 78 765 8% 863 99 97.1 500 | 63 O18 7.1 697 78 76.5 88 863 98 6.1 110 1079 124 1216 650 [82 804 9.2 3 102 1001 114 INS 128 1256 14.3 1403 163 137.9 800 }100 98.2 13 NOD 126 1236 1411383 1ST 1540 176 172.7 193 194.2 . 930 | — 134 ISLS 149 146.2 16.7 1628 ING 182.5 20.9 205.0 23.5 230.5 1050 | — 68 161.9 185 1815 20.6 202.1 23,1 226.6 26.0 255.1 A 202 198.2 226 221.7 253 248.2 284 2786 ta wo |~ —~ — —~ — = - 24.5 240.3: 27.5 2698 30.9 303.1 Bo f~ — — = — = ~ ~ ~ ~ 286 2806 321 3149 1450 See ee et ee 358 3502 fs i — = — = 383 3957 L Note : Combinations denoted by dashes are not manufactured 1 Tabland2 a TABLE3: 385 4.00 450 30 60 80100 | Thickness 1 Weight per metre (Ww) Width ee ee eee te ON Ke ON ie N te ON Me ON ON ON 28 275 31 3nd 35 M3 39 383 47 461 63 618 78 765 | 100 3543 39 383 44 432 49 481 59 579 78 765 98 961] B25 45 441 50 490 56 549 63 618 75 726 199 981 126 1236] 160 56 549 63 G18 71 697 18 766 94 922 126126 157 1540 | 200 10 687 78 165 88 83 98 961 118 1158 1571540 196 1923 | 250 89 873 100 981 113 109 126 1236 151 1484 201 1972 251 2462] 320 Lt 1089 1261256 44 83187 1540 18H 18K 2512462 14 3080 | 400 | 119 1966 157 849 117 ITI8 196 13 246 DLS 31460 392 sas | sm 18.1 1776 204 200.1 230 2256 285 2502 306 3002 408 4002 s10 5003} «50 a 22.3 218.8 25.1 246.2 28.3 277.6 31.4 308.0 37.7 369.8 50.2 492.5 62.8 616.1 800 t 265 260.0 298 2923 326 3226 373 3659 447 4385 59.75857 746 7518 | 950 29.3 2874 33.0 323.7 37.1 3640 412 4042 495 4856 65.9 6165 824 8083 | 3050 320 313.9 36.1 354.1 406 398.3 451 4424 542 531.7 7227082 903 8858 | 1150 BB M14 392586 442 4936 49) 481.7 589 57T8 785.771 98.1 9624 | 1250 362 255.1 49.8 400.2 45.9 450.3 51.0 500.3 61.2 6004 816 8005 1020 10006 | 1300 404 3963 455 4464 51.2 5023 569 5582 683 6700 91.1893.7 1138 12164 | 1450 43.2 4238 48.7 447.7 54.7 5366 608 5964 730 716.1 973.9545 121.7 11939 | 1550 ” Tabland\3 TABLE 4: I MILD STEEL FLA’ (CROSS SECTIONAL AREA) Thickness 3.0 40 50 60 80 w RD ¢ Width Cross-Sectional Arca in em: 030 0.40 0.50 0.60 = = - os 0.60 075 0.90 120 - - 0.60 0.80 100 120 1.60 2.00 ~ 8 7s 1.00 125 130 2.00 2.50 3.00 0 0.90 1.20 1.50 1.80 240 3.08 3.60 35 Los Lao Ls 2.10 2.80 3.50 4.20 40 1.20 1.60 2.00 2.40 3.20 4.00 4.80 45 138 1.30 225 2.70 3.60 450 5.40 30 430) 2.00 250 3.00 4.00 5.00 600 55 165 2.20 275 3.30 340 5.50 6.60 60 1.80 2.40 3.00 3.60 430 6.00 720 65 S - ~ 3.90 5.20 6.50 7.80 0 = _ - 4.20 5.60 7.00 840 8 = = - 4.50 6.00 750 9.00 80 _ = - 4.80 6.40 8.00 500 90 - - - 3.40 720 ¥.00 1.80 100 - - 6.00 8.00 1.00 12.00 110 ~ = - 8.80 1.00 15.20 120 - — —- = 9.60 12.00 140 < 130 - = 10.40 13.00 1560 . 140 = - - 1120 14.00 16.80 150 = = — 1200 1500 18,00 200 = = eS _ 20.00 24.00 250 - - = - = 25.00 30.00 300 - = ~ . . 36.00 400 5 = . = a Tabland\s ‘ TABLE 4: I MILD STEEL FLATS (CROSS SECTIONAL AREA) 6 20 28 2 wo [heiress os Cress Secto Width . i = 10 = = = Ss = ~ ~ 20 : = = = 28 aso - - - 0 560 620 2.00 - - as 640720 800 = 10 720 810 900 - - ~ |as 800 9.00 10.00 120 - - | % 880 9.90 11.00 1375 _ — Joss 960 1080 12.00 15.00 920 ‘ « toa 1170 13m 1628 2080 2600 | 65 120 60 1400 1750 22.40 2x0 | 70 bw B30 15.00 1878 2400 sooo | 78 so 440 16.00 20.00 25.00 na | x0 so 16.20 1800 250 2880 x60 | 90 16.00 18.00 20.00 25.00 32.00 woo | 10 @ 990 22.00 27.50 3520 4400 | 0 920 2160 24.00 3000 38.40 4800 | 120 nox 23.40 26.00 2250 41.60 2.0 | 130 n240 2520 28.00 3800 4480 sso | 140 2400 27.00 30.00 37:50 48,00 6000 | 150 32.00 3600 40.00 50.00 64.00 s000 | 200 4000 4500 50.00 250 30.00 woo. | 250 48.00 5400 6.00 75.00 96,00 120.00 | 300 | 6400 7200 fom 10000200 160.00 | 400 Tabland\s TABLE 5S: MILD STEEL FLATS (WEIGHTS) Thickness] 3.0 40 50 60 30 10 2 ‘width ‘Weight per moire length () b mm | kg ON ke. N ke oN kg N ke oN kg N kg N w joz 2 03 29 05 49 — — = — — ~~ 1s fos 39 05 49 06 $9 07 69 09 88 — — ~ 2 os 49 06 59 08 78 09 88 13 2B 16 17 — = 25 [06 59 of 78 10 98 12 8 16 157 20 196 24 235 30 [07 69 09 88 12 U8 14 7 19 186 24 235 28 275 35 Jos 78 Lt 08 14 137 16 157 22 216 28 275 33 324 40 [09 88 13 128 16 157 19 186 25 245 31 304 38 373 45 ]L1 tos 14 13.7 18 177 21 206 28 2S 35 343 42 412 so [12 18 16 157 20 196 24 235 31 304 39 383 47 461 ss ]13 128 17 167 22 216 26 28S 34 334 43 422 52 SLO 6 |is 137 19 186 24 235 28 275 38 373 47 461 56 549 6 J|— ~ = — = = 31 304 41 402 51 500 6.1 598 nw | — = = = 33 24 44 82 55 40 66 647 ws |- ~ —~ — = = 35 343 47 461 59 579 71 69.7 80 ~ = = = = 38 373 50 491 63 618 75 736 wo f— — =~ = ~ = 42 412 56 549 7 697 85 B34 wo f— — — — = = 47 461 63 618 78 165 94 922 no J[— — = — = = 52 510 69 677 86 B44 104 1020 no }—- — ~ — = — 56 549 75 736 94 922 113 1109 Pe — — 82 804 1021001 122 1197 wo J— — = — = = — = 88 863 1101079 132 1295 io J — — = = ~ = = 94 92 1181158 141 1383 20 | — -~-- +--+ = 157 154.0 18.8 1848 a — ~ = = = = 196 1923 236 2315 wo f- -— -— - = —- - = = = ~ 28326 0 ee (cori ny Tablanas el ‘TABLE (WEIGHTS) 6 8 20 25 40 | Thickness vn Weight per metre length () width 6 . paren ree mm ke oN ke oN oke ON kp N ke ON ke ON Go S= 25 oe a 0 8 Beas a S22 15 = —- = = == = 0 - = 5 ee eee HK 25 380373 Soe So Se oe 0 442 50 41 55 S40 33 50 491 56 549 63 618 40 36 S49 64 8 TL OF — 45 63 618 71 697 78 73 98 94 —~ — — 50 69 617 18 %S 86 M4 OS 9 — — — — 35 15 736 85 S494 9722 TR ISK ISA RD 60 82 804 92 93 102 1001 128 1256 163 1599 24 2001 6s 88 863 99 971 110 1079 137 id 176 1727 222 2188 7 94 922 106 10 18 1188 147 42 BB 1844 23.6 D3LS 5 100 985 11.3 110.9 126 1236 15,7 154.0 20.1. 197.2 25,1 246.2 80 113 109 12.7 246 141 1383 -17.7-173.6 226-2217 283. 2776 40 126 1236 14.1 BRI 187 1540 196 1923 28.1 246.2 314 3080 100 156 155.4 155 1520 173 16.2 216 2119 276 2708 443 3384 110 154 18.1 179 1668 188 1844 236 2S 301 2953 377 3098 120 16,3 159.9 18.4 180.5 204 2001 255 250.2 27 3208 4.8 4002 130 176 1727 198 1942 220 2158 275 2698 352 345.3 440 431.6 140 188 1844 212 2080 236 2315 9A IRA 37.7 HOH ATA A62L 150 25.1. 2462 283 2776 314 3OR0 39.2 5846 50.2 4925 628 GI6.L 200 3143080 353 M63 392 3846 49.1 4817 628 616.1 785 770.1 250 37.7 698 424 M159 47.1 4621 589 STB 754 739.7 942 924 300 50.2 492.5 $6.5 5543 28 616.1 78S 970.1 1005 _ 985.9 12546 1232.1 400 Note + In this table the weight per s/em’ or 0.077 Niem3 and are rounded off to one decimal place nee values are calculated on the basis that steel weighs 7.85 Tables TABLE 6: | (SURFACE AREA) j Width 9001000. 17091200125 1400 15001600 1800” 20002200. 2500 | ca _ Length Surface Area in m? } a ‘ 2000 | 180 2.00 220 240 250 280 3.00 320 360 4.00 440 5.00 nao | ios 220 242 264 275 308 330 352 396 440 484 5.50 aso | 225 250 2.75 300 2195 350 3.75 400 450 5.00 550 625 : 200 | 242 280 308 336 350 392 420 448 S04 560 6.16 7.00 3200 | 288 320 352 384 400 448 480 512 57% 640 7.04 8.00 3600 | 324 360 396 432 450 504 540 576 648 720 792 9.00 4900 | 360 400 449 480 500 560 600 640 720 800 880 10.00 4500 | 405 450 499 540 5625 630 675 720 810 900 9.90 1125 5000 | 450 5.00 5.50 600 625 700 750 800 900 1000 11.00 12.50 5600 | $04 560 616 6.72 7.00 784 440 ¥.96 1008 1120 1232 14.00 6300 | 567 630 693 756 7875 282 945 t008 1134 1260 13.86 15,75 rio | 639 110 781 852 8875 9.94 1065 1136 12.78 1420 1562 1775 8000 | 720 8.00 880 9.60 10,000 1120 12.00 12,80 1440 16.00 17.60 2000 9000 | 8.10 960 990 1080 11.25 1260 1350 1440 1620 18.00 19.80 22.50 10000} 9.00 10.00 11.00 1200 12.50 1400 1500 1600 18.00 20.00 22.00 25.00 11000 | 9.90 1100 12.10 1320 13.75 1540 1650 17.60 1980 2200 2420 27.50 12500 | 11.25 1250 1375 15.00 156251750 1875 20.00 22.50 2500 2750 3125 oo. 16 TABLE 7: (WEIGHTS OF § MM PLATES) Width 9001000 11001200 1250 1400 1500 1600 1808 2000 2200 2500) b mm Length Weight in kg 2000 | 106 FS 864 94.2 1 109.9 1178 125.6 1413 1570 172.7 196.2 2200 | 77.7 864 95.0 103.6 107.9 120.9 129.5 1382 155.4 172.7 190.0 215.9 2500 | 88.3 98.1 107.9 117.8 122.7 137.4 147.2 1570 176.6 1962 215.9 245.3 2800 | 989 109.9 120.9 131.9 137.4 153.9 1648 1758 1978 2198 2418 2748 3200 | 113.0 1256 138.2 150.7 137.0 1753 1884 21.0 7261 2512 2763 3140 3600 | 1272 141.3 1554 169.6 176.6 1978 212.0 226.1 254.3 282.6 310.9 353.2 4000 | 141.3 157.0 172.7 188.4 196.2 2198 235.5 251.2 282.6 3140 3454 3925 4500} 1590 1766 1943 2120 2208 2473 264.9 282.6 317.9 3532 388.6 441.6 5000 | 176.6 196.2 215.9 235.5 245.3 2748 2944 314.0 3532 392.5 431.8 4906 5600 | 1978 2198 241.8 2638 2748 307.7 329.7 351.7 3956 439.6 483.6 549.5 6300 | 222.5 2473 272.0 296.7 309.1 346.2 370.9 395.6 445.1 4946 $44.0 618.2 7100} 2508 2787 306.3 334.4 348.3 390.1 $180 4459 SOLG S974 613.1 696.7 8000 | 282.6 314.0 345.4 3768 3925 439.6 471.0 5024 5652 628.0 6908 785.0 9000 | 317.9 353.2 3886 423.9 4416 494.6 529.9 565.2 6358 706.5 7772 883.1 0000 | 353.2 3925 4918 471.0 490.6 549.5 588.8 628.0 7065 785.0 863.5 981.2 11000 | 388.6 431.8 474.9 518.1 539.7 GOL4 647.6 690.8 777.2 8635 949.8 1079.4 12500 | 441.6 490.6 539.7 588.8 613.3 686.9 735.9 785.0 883.1 981.2 1079.4 1226.6 Weight in kN 2000 0.69 0.77 O85 0.92 096 108 156 123 139 154 1.69 1.92 2200 0.76 085 093 1.02 1.06 118 127 135 1.52 169 186 2.12 2500 087 0.96 106 LIS 120 13S 144 154 173 192 212 241 2800 0.97 1.08 148 129 135 151 162 172 1.98 238 237 2.69 3200 AML 123 135 148 154 1.72 185 1.97 222 246 2.71 3.08 3600 125° 139 182 166 1.73 194 208 222 249 277 305 3.46 4000 139 154 169 485 192 21S 23L 246 277 3.0K 3.39 3.85 4500 156 1.73 191 208 216 242 260 277 311 346 3.81 4.33 000 173 4.92 212 231 24t 269 289 308 3.46 385 4.23 481 5600 194 215 237 258 269 302 3.23 345 3.88 431 4.74 5.39 6300 218 242 2.67 291 3.03 339 363 388 436 485 533 6.06 7100 24S 2.73 301 3.28 342 383 410 437 492 547 601 6.23 8000 2.77 3.08 3.39 3.69 385 431 462 493 554 6.16 6.77 7.70 ‘9000 342 346 SRL 446 433 485 520 S54 6.23 6.93 7.62 8.66 10000 346 3.85 4.23 462 481 539 577 616 693 7.70 8.47 9.62 11000 381 423 466 509 529 593 635 677 762 847 9.31 10.59 12500 433481 529 5.77 601 673 7.21 _7.70_8.66 9.62 _ 10.59 12.03 TABLE&: (WEIGHTS OF 6 MM PLATES) Width 900 1000 1100 1200” 1250 1400 1300 1600 800 2000 22002500 b { som ; Lengih Weight in ke | h mm ‘ 2000 | 848 942 1036 113.0 1178 1319 1413 150.7 169.6 1884 2072 2358) 2200 | 933 1036 1180 1243 1295 last i554 165% 186.5 2072 2280 25901 2500 | 1060 1178 129 1413 1472 1648 1766 1884 2120 235.5 259.0 2944] 2800 | 1187 1319 145.1 1583 164.9 1846 1978 2110 2374 2638 290.1 327) 3200 | 1356 1507 1658 180.9 1884 2110 226) 2412 2713 3014 3316 3768, I; sooo | 1326 1696 186% 2029 2120 2574 2583 2713 3052 3391 3730 4259) 3000 | tose 1884 2072 2261 2355 2618 2826 301A 339.1 3768 414s 410) $309 | 1908 2120 2331 2543 2689 2967 3119 3391 3813 4239 $063 5299] 5000 212.0 235.5 259.0 282.6 294.4 329.7 353.2 3768 423.9 471.0 518.1 5888 S600 | 2378 2638 290.1 3165 320.7 3693 3936 4200 4748 5275 $803 6504 630) | 2671 2967 3264 3561 3709 4184 4ST 44S S341 3928 GSR TALE Ti0p | 3010 3844 3679 4013 4180 4682 S016 5931 6019 GoBs 7357 8360 8000 339.1 376.8 434.5 452.2 471.0 527.5 565.2 602.9 678.2 753.6 829.0 9420) 9000 381.5 423.9 466.3 508.7 529.9 $93.5 6358 678.2 763.0 847.8 932.6 10598) 10000 423.9 417.0 518.1 565.2 5888 659.4 706.5 753.6 847.8 942.0 1036.2 11773) 11000 466.3 518.1 569.9 621.7 647.6 725.3 777.2 829.0 932.6 1036.2 1139.8 12952. 12500 $29.9 588.8 647.6 706.5 735.9 824.2 883.1 942.0 1059.8 1177.5 1295.2 14719! 2000 083 0.92 102 LM AIS 4.29 139 148 1.66 1.85 2.03 2200 O92 402 112 122 127 142 152 163 183 203 2.24 2500 Lod Lis 127 139 144 162 173 185 208 231 254 2800 116 129-142-158 162 181 194 207 233 259 2.84 3200 133 148 163 «LTT 185 207 222 236 266 2.96 3.25 3600 150 166 183 199 208 233 249 265 299 332 3.66 4000 166 185 203 222 231 259 277 296 332 3.70 4.06 . 4500 187 208 229 249 260 291 312 332 374 4.16 4.57 5006) 208 231 254 277 289 3.23 346 369 416 4.62 5.08 3600 233 259 284 310 323 362 388 414 466 517 5.69 6300 262 291 320 349 364 407 436 466 5.24 5.82 6.40 700 295 328 36 393 410 459 492 $28 590 656 721 3000 333 369 4.06 443 4.62 5.17 S54 591 665 739 8:13 9000 374 416 457 499 $19 $82 623 665 748 B31 9:15 10000 416 462 508 S54 5.78 647 693 739 831 924 10.16 11000 457 508 $59 610 635 7.11 762 813 915 10.16 11.18 12500 520 5.78 638 693 722 808 866 924 1039 1155 12.70 18 TABLE 9: (WEIGHTS OF 8 MM PLATES) t Width 900 1000 1100 1200 1250 i400 1500 {600 1800 2000 2200 2500 | b | mm i i Length Weight in kg } 1 mm | 2000 | 113.0 125.6 138.2 150.7 1870 175.8 188.4 2020 226.1 2512 2763 314.0 2200 | 124.3 1382 152.0 165.8 1727 193.4 207.2 221.1 248.7 276.3 3040 345.4 2500 | 141.3 187.0 172.7 1884 1962 2198 2355 2512 282.6 3140 3454 3924 2800 | 1583 1758 193.4 211.0 2198 246.2 2638 2813 3165 351.7 386.8 4396 3200 | 180.9 206.0 221.1 2412 2512 2813 3014 3215 361.7 4019 442.1 5024 3600 | 203.5 226.1 248.7 2/13 282.6 316.5 339.1 361.7 4069 4522 4974 565.2 4000 | 226.1 251.2 2763 301.4 314.0 351.7 3768 491.9 4522 5024 5526 6280 4500 | 254.3 282.6 310.9 399.2 353.2 3956 423.9 452.2 5087 3652 621.7 7065 i 5000 | 282.6 314.0 345.4 3768 3925 439.6 471.0 5024 565.2 628.0 690.8 785.0 5600 | 3165 351.7 3868 422.0 4396 4924 5275 362.7 6330 7034 773.7 879.2 6300 | 356.1 3956 433.2 4748 4946 553.9 593.5 633.0 7122 791.3 8704 989.1 - TOO | 401.3 445.9 490.5 535.1 5574 624.2 6688 713.4 802.6 8918 980.9 1114.7 8000 | 452.2 $02.4 552.6 602.9 628.0 703.4 753.6 803.8 904.3 1004.8 1105.3 1256.0 9000 | $087 565.2 621.7 678.2 706.5 791.3 47.8 904.3 10174 11304 1243.4 1413.0, 10000 | 565.2 6280 690.8 753.6 785.0 879.2 942.0 1004.8 1130.4 1256.0 1381.6 1570.0 11000 | 621.7 690.8 759.9 829.0 863.5 967.1 1036.2 1105.3 1243.4 1381.6 1519.8 1727.0 12500 | 706.5 785.0 863.5 942.0 981.2 1099.0 1177.5 1286.0 1413.0 1570.0 1727.0 1962.5 Weight in kN 2000 LIL 123 135 148 1541.72 185 1.97 222 246 2.71 3.08, 2200 122 135 149 163 169 190 203 237 244 271 298 3.39 2500 139 154 169 185 192 215 231 246 277 3.08 339 3.85 2800 155 172 190° 207 215 241 259 2.76 310 345 3.79 431 3200 177 197 217 237 246 276 296 315 355 3.99 433 4.93 3600 199 222 246 266 2.77 310 332 355 399 443 488 5.54 4000 222 246 271 296 308 345 369 394 443 493 542 6.16 4500 249 277 305 332 346 388 4.16 443 499 554 610 6.93 5000 2.77 OR. 339 269 385 432 462 4.92 S54 6.16 6.77 7.70 3600 310 345° 379 4.14 431 483 5:17 552 621 690 759 862 6300 349 388 4.27 466 485 5.43 S82 621 698 7.76 854 9,70 7100 3.93 437 481 $25 547 612 656 7.00 787 875 9.62 10.93 8000 443 493 542 5.91 616 690 739 788 887 9.85 10.84 1232 9000 499 554 610 665 693 7.76 831 B87 9.98 1109 12.19 13.86 10000 554 6.16 677 739 770 862 924 985 11.09 1232 13.55 15.40 11000 610 6.77 745 813 847 948 (0.16 1084 12.19 13.55 14.90 16.94 12500 6937.70 8.47 9.24 9.62 10.78 11.55 1232 13.86 15.40 16.94 19.25 9 TABLE 10; (WEIGHTS OF 10 MM PLATES) Width 9001000 1100 1200 1250 14001300 16% 18002000 2200 2500 b mm Length Weight in kg t mm 5 2000 | 141.3 157.0 172.7 188.4 196.2 2198 235.5 251.2 2826 3140 343.4 3925) 2200 | 1554 172.7 190.0 2072 2159 2418 259.0 2763 310.9 345.4 3799 4318] 2500 | 176.6 196.2 2159 2355 2453 2748 2044 3140 3532 392.5 431.8 4905) 2800 | 1978 2198 2418 263.8 274.8 307.7 329.7 351.7 395.6 430.6 4826 $495) 3200 | 226.1 2512 2763 3014 314.0 351.7 3768 4019 4522 sors 552.6 6280! 3600 | 254.3 2826 310.9 339.) 353.2 395.6 423.9 452.2 508.7 565.2 621.7 7065 4000 | 2826 314.0 3454 3768 392.5 439.6 471.0 502.4 565.2 6280 6908 7850 4500 | 3179 353.2. 388.6 423.9 4416 494.6 529.9 565.2 6358 706.5 777.2 8891) 5000 | 353.2 3925 4318 471.0 4906 549.5 5888 6280 706.5 7850 863.5 9812) 5600] 3956 439.6 483.6 527.5 549.5 GIS4 659.4 7034 7913 479.2 967.1 10990 6300 | 445.1 4946 5440 593.5 6182 6924 741.8 7913 8902 989.1 1088.0 12364 7100 | S016 5574 613.1 668.8 696.7 780.3 836.0 891.8 1003.2 1114.7 1226.2 139341 8000 | $65.1 628.0 6908 753.6 7850 879.2 942.0 10048 11304 1256.0 1381.6 15700 9000 | 635.8 7065 7772 8478 883.1 989.1 3059.8 1130-4 1271.7 1413.0. 1554.3 17662 10000 | 706.5 785.0 863.5 942.0 981.2 1099.0 1177.5 12560 1413.0 1570.0 1727.0 19625 11000} 7772 863.5 9498 1036.21079.4 1208.9 12952 1381.6 1584.3 1727.0 1899.7 21588 12500 | 883.1 981.2 1079.1 1177.5 12266 1373.8 1471.9 15700 1766.2 1962.5 2158.8 24531 Weight in kw 2000 | 139 154 (69 185 192 216 231 246 2.77 3.08 339 385 2200 | 152 169 186 203 212 237 254 271 305 339 373 4m 2500 | 1.73 192 212 231 241 269 289 308 346 385 423 481 roo | 1194 216 237 259 270 302 523 343 388 431 474 539 3200 | 2122 246 «271 «296 308 345 369 394 443 493 542 G1! 3o00 | 249 277 305 3.33 346 388 416 443 499 554 6.10 693) 4000 | 2.77 308 339 369 385 431 462 493 S54 616 6.77 7.70 4500 | 312 346 381 4.16 433 485 520 554 623 6.93 762 866) sooo | 346 3.85 423 462 481 539 5.77 616 693 770 847 962) 5600 388 431 474 $.17 539 603 647 6.90 7.76 8.62 948 10.2) 6300 | 436 485 533 5:82 606 6.79 727 7.76 8.73 9.70 1067 12.1 7100 | 492 547 601 6.56 683 765 820 8.75 984 10.93 1202 1366 $000 | 5:54 6.16 6.77 739 770 862 924 985 1109 1232 13.58 1540 9000 | 6.23 693 762 831 866 9.70 1039 1109 1247 13.86 1524 173 10000 | 693 7.70 847 9.24 9.62 10.78 1155 1232 1386 15.40 16.94 2925 1000 | 7.62 847 931 10.16 10.89 1186 12.70 13S 1524 $6.94 1863 21.0] 12500 _| 8.66 9.621058 11.55 1203 1547 1443 1540 1732 1925 21.17 2406) | 2 TABLE U: PLATES (WEIGHTS OF 12 MM PLATES) ‘Width: 900 10001100 1200 1250 1400 1500 1600 1800 2000 2200 2500 4 b mm. Tength Weightinke , mm 2000 169,6 188.4 207.2 226.1 235.5 263.8 282.6 3014 339.1 3768 414.5 471.0 2200} 186.5 2072 2280 248.7 2590 290.1 310.9 3316 3130 4145 4559 518.1 2500 212.0 235.5 259.0 282.6 294.4 329.7 353.2 376.8 423.9 471.0 518.1 S888 2800 2374 2638 290.1 316.5 329.7 369.3 395.6 422.0 474.8 527.5 $80.3 659.4 3200 | 2713 3014 3316 361.7 376.8 4220 452.2 4823 5426 6029 662.2 7536 3600 | 305.2 339.1 3730 406.9 423.9 4748 508.7 S426 G1O4 6782 746.1 8478 4000 | 339.1 376.8 4145 452.2 4710 5275 $65.2 6029 6782 7536 B90 9420 4500] 38L'5 4239 466.3 $08.7 529.9 5935 635.8 GIR2 763.0 8178 932.6 1059.8 5000 | 423.9 471.0 SISA $65.2 5888 689.4 706.5 7536 847.8 942.0 1036.2 11775 $600 | 474.8 5275 580.3 6330 659.4 T98S THL3 844.0 949.5 1055.0 1160.5 13188 6300 534.1 593.5 6528 712.2 741.8 836.8 890.2 949.5 1068.2 1186.9 1305.6 1483.6 7100 | 6019 668.8 735.7 $02.6 836.0 936.3 1003.2 1070.1 1203.9 1337.6 1471.4 16728 2000} 6782 7836 829.0 904.3 942.0 1055.0 1130.4 1208.8 1356.5 15072 16579 1884.0 9000 | 763.0 847.8 932.6 1017.41959.8 1186.9 1271.7 1386.5 1326.0 1695.6 1865.2 2119.5 10000 | $47.8 942.0 1036.2 1130.4 1177.5 1318.8 1413.0 1507.2 1695.6 18840 2072.4 2353.0 11000 | 932.6 1036.2 1139.8 1243.4 1295.2 1450.7 1534.3 16579 1865.2 2072.4 2279.6 2590.5 12500 | 0898 1177.5 1295.2 1413.01471.9 1688.5 1766.2 1884.0 2119.5 2355.0 2590.5 2943.8 Weight in kN 2000 166 185 203 2.22 231 259 2.77 296 3.33 369 406 4.62 2200 | 183 203 224 244 234 284 305 325 366 406 447 S08 e 2500) 208 231 254 277 289 323 346 369 4.16 462 S08 5.77 2800 233° 2:59 284 3.10 3.23 362 388 414 466 5.17 569 6.47 3200} 266 296 325 385 369 418 442 473 532 S91 650 739 3600 | 2.99 333 366 399 416 466 499 532 399 66S 7.32 831 y000 | 333 369 406 4.43 462 5:17 SS4 5.91 6.65 7.39 813 9.28 4500 374 416 457 499 520 582 623 665 748 831 915 10.39 » 5000 | 4.16 4.2508 SS4-597 GAT 6.93 739 831 9.24 IO.t6 1155 3600 | 466 $5.17 5.69 621 647 724 7.76 828 931 1035 1138 1293 6300 $9.24 $82 640 6.98 7.27 81S 8.73 9.31 1047 11.64 1280 14.55 7100] $90 656 7.21787 820 918 984 1049 JNBI 1312 1443 16.40 8000} 665739 B13 BET 924 1035 11.09 1182 1330 1478 1626 1848 9000} 748-831 9.15 9.98 1039 1164 DAT 1330 14.96 16.63 1829 20.79 19000 | 8319.24 1016 11.09 11.35 12.93 13.86 14,78 1663 18.48 20.32 23.09 nooo | 9.15 10.16 N18 12.19 12.70 14.23 1524 16.26 1829 20.32 2236 25.40 12500 | 1039 11.58 $2.70 13.86 14.43 16.17 1732 18.48 20.79 23.09 2540 28.87 Py a” TABLE 12: (WEIGHTS OF 14 MM PLATES) Width 900 1000 1100 1200 1250 1400 1500 1600 1800 2000 2200 2500 >’ Zum Length Weight in kg. 1 mm 2000 | 1978 2198 2418 263.8 2748 307.7 329.7 351.7 395.6 439.6 483.6 5495 2200 | 2176 241.8 266.0 290.1 3022 3385 3627 3868 435.2 483.6 531.9 6044 2500 | 2473 2748 302.2 329.7 343.4 3846 412.1 4396 494.6 5495 6044 6869 2800 | 2769 3077 3385 369.3 384.7 430.8 461.6 492.4 553.9 6154 6770 7693 3200 | 3165 351.7 3868 422.0 4996 492.4 5275 562.7 633.0 7034 773.7 8792 3600 | 356.1 3956 435.2 474.8 4946 553.9 593.5 633.0 7122 7913 870.4 989.1 . 4000 | 395.6 439.6 4836 5275 549.5 6154 659.4 7034 791.3 879.2 967.1 10990 4500 | 445.1 4946 544.0 593.5 618.2 692.4 7418 7913 890.2 989.1 1088.0 12364 5000] 494.6 549.5 6044 659.4 686.9 769.3 824.2 879.2 989.1 1099.9 1208.9 13734 5600 | 553.9 6154 6770 7385 769.3 8616 923.2 984.7 11078 1230.9 1354.0 15386 6300 | 623.1 6924 7616 8308 865.5 969.3 1038.6 11078 1246.3 1384.7 1523.2 17309 7100 | 702.3 780.3 858.3 936.3 975.4 1092.4 1170.4 1248.5 1404.5 1560.6 1716.6 1950.7 8000 | 791.3 879.2 967.1 1055.0 1099.0 1230.9 1318.8 1406.7 1582.6 1758.4 1934.2 21980 9000 | $903 5891 sne90 12869 12964 13847 14856 1582.6 1780.4 19782 21760 24728 10000 | 989.1 1099.0 12089 1318.81373.8 1538.6 1648.5 1758.4 1978.2 2198.0 2417.8 27475, 11000 | 1088.0 1208.9 1329.8 1450.7 1511.1 1692°5 1813.4 1934.2 2176.0 2417.8 2659.6 30222 12500 | 12364 1373.8 1511.1 1688.51717.2 1923.2 2060.6 2198.0 2472.8 27475 3022.2 34344 Weight in kN 3 2000 19$ 216 237 2.59 269 3,02 3.23 345 388 431 4.74 539] 2200 213 237 261 284 296 332 356 379 427 4.74 522 SL — 2500 | 242 269 296 323 337 377 404 431 485 539 593 67m] | 2800 | 272 3.02 3.32 362 3.77 422 453 489 543 6.03 664 TSS i 3200 310 345 3.79 4.14 431 4.83 S17 5.52 6.21 6.90 7.59 8.62) } 3600 349 388 427 466 485 5.43 582 621 698 776 854 90 4000 | 388 431 474 5.17 539 603 647 690 7.76 862 948 1078 “ 4500 | 436 485 533 582 606 6.79 727 7.76 873 9.70 1067 32) i 5000 | 485 S39 $93 G47 6.74 754 808 862 9.70 10.78 11.86 1347 3600 $42 6.03 664 724 754 845 905 9.66 1086 1207 13.28 1509 6300 611 6.79 747 81S 849 951 10.19 1086 1222 13.58 14.94 1697 7100 689 765 842 9.18 957 10.71 1148 12246 13.77 1530 16.83 19.5] 8000 71% 861 948 10.35 10.78 1207 12.93 1380 15.52 1724 1897 2155) 9000 | 8.73 9.70 1067 1166 12.12 13.58 14.55 15.52 17.46 19.40 21.34 2425! 10000 970 10.78 11.86 12.93 13.47 1509 16.17 1724 19.40 21.55 23.71 26941 11000 | 10.67 1186 13.04 14.23 1482 16.60 17.78 18.97 2134 23.71 26.08 2954 12500 | 12.12 13.47 1482 16.17 1684 18,86 20.21 21.56 24.25 26.94 29.64 33.8 TABLE 13: (WEIGHTS OF 18 MM PLATES) Width 90010001100 1200 1250 1400 1500 1600 1800 2000 2200 2500 b mm Length Weight in kg. 1 mm 2000 | 254.3 282.6 310.9 339.1 353.2 395.6 423.9 452.2 5087 565.2 621.7 706.5 2200 | 279.8 310.9 341.9 373.0 3886 435.2 466.3 497.4 559.5 621.7 683.9 777.2 2500 | 317.9 353.2 3886 4239 4416 4946 529.9 565.2 6358 7065 7772 883.1 2800 | 356.1 395.6 435.2 4748 494.6 553.9 593.5 6330 7122 791.3 870.4 989.1 3200 | 406.9 452.2 4974 542.6 565.2 633.0 6782 7235 813.9 904.3 9948 11304 3600 | 4578 S087 559.5 6104 6358 7122 763.0 813.9 9156 1017.4 1119.1 1271.7 4000 | 508.7 565.2 621.7 678.2 706.5 791.3 8478 904.3 1017.4 11304 1243.4 1413.0 4500 | 572.3 6358 699.4 763.0 794.8 890.2 953.8 10174 1144.5 1271.7 1398.9 1589.6 5000 } 635.8 706.5 777.2 8478 883.1 989.1 1059.8 1130.4 12717 1413.0 1554.3 1766.2 5600 | 712.2 7913 870.4 9495 989.1 1107$ 1186.9 1266.0 1424.3 1582.6 1740.8 1978.2 6300 | 801.2 8902 979.2 1068.211127 1246.3 1335.3 1424.3 1602.3 1780.4 1958.4 2225.5 7100 | 902.9 1003.2 1103.6 1203.91254.0 1404.5 1504.8 1605.2 1805.8 2006.5 2207.1 2508.1 8000 | 1017.4 1130.4 1243.4 1356,51413.0 1582.6 1695.6 1808.6 2034.7 2260.8 2486.9 2826.0 9000 | 1144.5 1271.7 1398.9 1526.01589.6 1780.4 1907.6 2034.7 2289.1 2543.4 2797.7 3179.2 10000 | 1271.7 1413.0 1554.3 1695.6 1766.2 1978.2 2119.5 2260.8 2543.4 2826.0 3108.6 3532.5 } 11000. | 1398.9 1554.3 1709.7 1865,01942.9 2176.0 2331.4 2486.9 2797.7 3108.6 3419.5 3885.8 12500 | 1589.6 1766.2 1942.9 2119,522078 2472.8 2649.4 2826.0 3179.2 3532.5 3885.8 4415.6 Weight in kN 2000 249 2.77 305 332 346 388 4.16 443 4.99 554 610 6.93 2200 24 3.05 335 3.66 381 4.27 457 488 549 6.10 671 7.62 _ 2500 312 346 381 4.16 4.33 485 520 $54 623 693 7.62 8.66 2800 349 388 427 466 485 5.43 582 621 698 776 854 9.70 3200 3.99 443 488 532 554 621 665 709 798 887 976 11.09 3600 449 499 $49 5.99 623 698 748 7.98 898 9.98 10.97 12.47 4000 499 $54 610 665 693 7.76 831 887 9.98 11.09 12.19 13.86 4500 $61 6.23 686 748 7.79 882 935 998 1122 1247 13.72 1559 5000 623 6.93 762 831 866 9.70 10.39 11.09 1247 13.86 1524 1732 3600 699 7.76 854 931 9.70 10.86 1164 12.42 13.97 15.52 17.07 19.40 6300 786 873 9.60 10.48 10.91 12.22 13.09 13,97 15.71 17.46 19.21 21.82 7100 984 1082 11.81 1230 13,77 14,76 15.74 17.71 19.68 21.64 24.60 8050 9.98 11.09 1219 1330 13.86 15.52 1663 17.74 19.95 22.17 2439 27.71 9600 | 11.22 1247 13.63 14.96 15.59 1746 18,71 19.95 2245 24.94 27.44 31.18 19000 | 12.47 13.86 15.24 16.63 1732 1940 20.79 22.17 24.94 27.71 3048 34.64 11000 | 13.72 15.24 16.77 1829 19.05 2134 2286 2439 27.44 3048 3353 38.11 12500 _| 1589 17.32 19.05 20.79 21.65 24.25 25.98 27.71 31.18 34.64 38.11 43.30 23 TABLE 15: (WEIGHTS IN KG & N) TadedNew | 000000 0m Oh inal Thickness size | stansaraNon- WeahtinN som * mm final Surface Area 1100-600] 10s | 332 20 ews 22 a9 67 so] 138 | ata 20 657d 32nd 1167 ak LST soo} tee | $0028 8410001851392 1559 IHS 1000] 180 @& m3 tos is 1392 1609 Ine a2 too] 130 7356126 13731380. LN ola 2I88 200] 26 4 10913341500 fee? 18632019 A 1230] 235 63 Ions 13831559 Ia. 9422167 2422 vioo] 252 mr (ze isd 43 ind 2177 ag aT ts00) 270 1039 1d tee? 1093 OTs aA 2599 OL nooo 60} 120 «| 393 as 5783S wad 9nd ton 57 aaa nso] 130 | aon Sta Sad und 1457 tap tua tere soo} igo | 589 ose 873 Mow 12S 1383159736 942 oo] 200 | ais 36397] a36 1383 So 6 100287 too] 220, | 627431069 Has 1520 Tee 189321182973 a0] 2a | mas 2267 Mae 667 Tad 2009 aaa 2589 1o0] 230 | 763961216 150. 1036 1922 3187032602 00} zap | 863 tong 1353 tras 19422157 aun? 3697000 tsoo | 300 | 922, tis? 1451 tea 20792314 2589 aes 9s Weightin kg tsoo-eco} os | 3442 532k 8s sw mo] 133 | 423367 SS twa oo, tee | St end? wo} to | 37a? feof 130 | 278k ' 0] te | kas o7 eS to 90 aa { v0) 325) ae taS9te 9k ad vol 22 | 790 «99 2s 38k gsm i300] 320 | oS toes 09a 63 a 2000 « 600 1.20 38 47 39 1S BS 94 106 ns 132 wo} 130 | 473978 8ST es vo} ts | 3708S ooo] 20 «| 378992671696 20 no] 239] 63te ass 29d ae tam] 2a] 93d a9 ate aa a0 330028 keds? ae Ds noo) 20 | af oto bate kee son Tso) 300 |S tes o212 dhe ded Do (Conny u TABLE 15: I SHEETS (WEIGHTS IN KG & Nj G 160180 200224250 280 3.15 355 4.00] Standard Nom- ‘Weigtin Size sum + mm 1334 1500 1667 1863 2079 2324 261.8 2952 3324 1.08 1800 » 600 1967 1873 | 2079 2324 28992912 32783687 AIS 138 750 1991 246 2491-25318 M9) 3932 423901 162 300 2216 249.1 2775 M09 M62 3883. B64 4923 S541 180 1000 2u2 2146 2982 M13 3813 4266 48S S413 G10 198 1100 2658 2091 3324 3726 HBB 4658 5237 5904 6649 216 1200 273 WIR Mo2 HRS 433A ABA 543.2 G14 6923 225 1250 3109 Mol 3883 M4 ABS 543.3 GIO GRRA 775.7 232 1400 B24 746 HSB 4658 $19.7 SRLS 6551 7375 BS 270 1500 1481 167 1844 2069 2314 2589-2902 3075 120 2000 = 600 1e44 20792814 -28R9 28633236 363K G09 130 750 2216 249) 27S 3109 M62 388343644923, 80 900 dit 275 3079 34s2 HAA BTS BAA S62 200 1000 2107 3050 3383-3793 4236 4746 S338 GOL 220 1100 2082 3824 3697 4138 dL STB SEIS 6561 240 1200 3079 36462 HAA BLS ABS S34 6060 GRAS 250 1230 B52 3883 GBS 82S S394 TRG 769 2.80 1400 36.7 4188 4519 SITE S776 4627276 BID 3.00 1500 Weight inks 36153 0190212237 2679 1.08 11800 +600 70 191 2237 26S 7? A 135 750 / 23 29 254 «28S HB 356 HOLS 509 162 900 | 26 284 «283317383. 396 44S SD S65 180 1000 | 249 Oa MB RD 3S 4905822? 198 209 | m1 WS 39 RO 47S 538 G2 TB 246 1200 283 31835396 4424985567706 228 1250 317 35639643 S54 2302 232 1400 339 382 dad 7S 520 593 6GB_ 152 BAB 270 +1500 132170 RAL 2862842973347 20 2000 « 600 J} Ws 212-364 AOL aT 130 730 226 284837383, 39H ASOD SHS 130 900 251 283 a 382392 MO 495587 Ga 2.00 1000 6 Ml MS 387) 432 dBA SALT 220 1100 3013393772271 S289 TS 240 1200 Sid 383392 HO 49150 THS 250 1250 382 396 © MO 49.2 $50 HS 62 ROB. 2.80 1400 si 377, 24 a7 2B SRD SD HDG 9H? 5.00 1500 (Continued) 25 TABLE 15: (WEIGHTS IN KG & N) ‘Standard Nom- | 0.40 0.50 0.63 0.80 0.90 100 12 125 140 inal Thickness Size | Standard Nom- Wein sm > nm final Surface Arc in? zam coo] 32 | 402 so 637d? a7 sn 70) 16s | SLO 70M tao 127S 1422589 ITS go] tse | sos 765961 21S 137315201706 94 13 ooo] 220 | 67431069 14531520 tops 1893 aM 2373 uo] daz | 74S 9321177 aga 16771863 2089 2324 2608 i200] 361 | sta 10201285 1B TSA 2080 2975 540 2884 120] 275 | B43 059. 1383s 914 21LB 273 2648 2962 400} 3g {95111871491 19371382733 2658 2962 331 1500] 330 | 1020 avs 1588 203022540 esd 31773560 soo coo] 150 | 46178 92 1039137 294 dat 70) ars | 78 726 US7 1a Mad 1618 1804 2020 soo] 235 | sas 18315591736 194221672422 too} 250 «| 76596 1sko 17361922 2157 2403 26927 tio} 27s | m3 1059 166 1914 2118 2373 2648 2962 200] 300 | 9221157 IMd 2079 D814 2589 2RRS 396 1250] 312s | 961 206 1320 1922 267 2103 2597 SOLL HH64 woo] 350 | tore i343 1696 2157 2422 269.7 S020 33643775 1500} 375 | 1187441 TH14 34 2599 2683 3236 3609 4040 Weightinks 2200600] 132 41052 6S 393 tks |G . 730) 165 52 6s 82a 7130S tL FF soo] se 6278882445399 t roo} 220 89 $6 «109 Rss 178 de tio} a2 76 493120182337 B88 i 1200 2.64 83 wo4 iB 16.6 187 20.7 232 25.9 29.0 1290) 273 85 08 1361739428 420302 | oo | 308 97 a1 s2,«93 82402 HBR x 150] 330 | a = 13063. 207233289 08363 | aso <600] 130 47 $90 1498S wo| iss | $90 7493324763206 | 900] 225 a 88 N39 100) 250 78 98 245777196220 HS 7S} ui} 325 86 108 «136173, 94s 4229002 | 200] 3.00 4 84RD BG 8494380 250] 32s | 98) 238s 96) STS 307-343 | 330, | 032732023 HOR MRS i500] 325 «| R147 2868265 9M HOR AID j ‘Coated F ae) i TABLE 15: (WEIGHTS IN KG & N) 160180200 228230280318 358 400 ] Standard Nom- inal Thickness ‘WeiahtinW rhs inal Surface Area} mm * mm 128 1834 3030 -27S_2840 28443197 3609 4060 132 | 2200600 2030 2285 2540 28443177 3560 4001 451.1 5080 165 730 242 246 503413 Bas 266 aos S413 6100 98 x0 3707 3050 3983-393 MBG MTHS $335 MLL 6776 220 1000 DRL 3354 126 «AI7B 458 SIT S864 Gs TSS 242 1100 3256 3658 4050 4350 S080 S68 GHA TBI B10 26 1200 3363 HOLS 236 4745 5295 5923 G58 75128473, 275 1250 BS 426o 4G S315 3923 669 7473 BALA 9883 308 1400 4060 4570 508 S688 6355 7110 4002 9022 10160 330 1500 14 2079 21d 2589 2883 3G 3638 4099 4619 130 | 2500» 600 Bid 3599 28833236 3609 4040 45505129 Las 750 275 Mg M62 3883 4334 dBA 4524 235 900 3079 Moz M44 31S OLS 5394 GOGO ASS 7698 250 1000 3u83 MRIS A236 4G 595 5923 wR 7512 AT 275 1100 36.7 M158 4619 SI78 576 6162 TS BIB BB 3.00 1200 344 433448155394 OLE 67 7880 BS41 9620 32s 1250 WLS Aaa S394 6031 67377541 BABS 9561 10777 350 1400 4619 579.7 STS 6462 T2LB ORL 01 MRGR T1852 375 1500 Weighting 166 187-207-3259 29.0 B36 at 132 | 2200-600 27 3259 90 a 363, 40RD SL 165 730 249 801348389 wD 552 22 98 00 m6 Hl MST G2 ASAD 220 1000 jos 42 3806S S32 5B G74 768 3a 1100, ga 373 M14 6a SIR SRO. S389 2e 1200 MS 89 82 484540. GO GOT 8 Ba 275 1250 387 BS 842 461762 SB 867 os 1400, 414 68518 SRO BS BLS 9201036 330 1300, We 212,664 9M OAR aT 150 | 2500. 600 Bs 25 BA 30 368812 dod 23RD 1375 730 2833183836 HZ WS 556-7 T06 225 300 314 383-382 44041550 TRS 230 1000 BMS 389 432844 O66 a4 215 1100 317 4 1 28D SD 2S 84 3.00 1200 392 42150 G13, suas 1250 40 S580 61S 687769 BGS 97S 1099 350 1400 4713305893936 4927104517 us 1500 (Continued) TABLE 15: (WEIGHTS IN KG & N) StandardNom-| 040 050 063-080-050 «1.0)(1,I2.«138—1.40 ‘nal Thickness in mm Size | Standard Nom- | ~ ‘WeightinN mun * am fnol Surface Ara} 2800 > 600 168 S264 LOLS 29 HSE HSL RB 750 210 647-84 102,94) -202, 26S 900 282 7S 97 mba THS tad 2177? Da. BM 1000 280 863 10713531726 19422157 242 269.7302 100 3.08 952 87 a9} 2198 29732492062 ILS 1200 336 | 10391204 162.8 298923242589 2893 3236 619 1250 330 | 4079 1383 1696-2187 2822 259.9 3023364 TPS 1400 302 [ie tsk 9d 2226302338375 DT 1500 420 | 1294 1613 20825892912 328 351.9 4D 4582 3200 » 600 192 SAB TRS 9RD_RT-— 133A MBL 16571844 2069 750 240 TSS 922 1GT BL 65,7 BLA 2069 © 23d 258-9 900 288 R210 1392 17719912. 2481-7775 3109 1000 320 ei 1226181972226 24612756 3079 4452 1100 352 [tons 135317062167 2442-2707 O38 TBS 1200 38 N87 148) 863 2383 265R 957 BS 347 AR 1250 400 tase 1S4 942 ast 2778 30794452 Rd LS 1400 a4 | ta83 3726-2177 3756 © 31093452 ROA BIS RDS 1500 480 [t4e1 184423242952 33243097 ASB AGL SIT 750 210 66 a2 32 48165 18S 206 Bt 900 232 79-99 «128 SBT 198222247277 1000 240 88 0 BR 176k DGS OR 1100) 308 97 WL 18293 R242 402 BB 1200 346 ws 132, 6G 2237 2H HS 30369. 1250 3.50 No 137173, 20 Ts 7S 30B HS 1400 3.92 2300 134944677308 HS SB 1500 420 320-5208 6497303692462 3200 « 600, 192 69 7S) 9S LHASA 69 ROLL 759 2.40 73 94 «9 S17 36264 900 288 90 3421 03226253 8331 1000 320 100 12615801 2651 813A 352 1100 3:52 M1 3B 174 21 249 27H 309 34S 387. 1200 3.84 1 SL 1980 ATL OL 3377 a2 ; 1250 4.00 26 15798251 RHA 352392 ado 1400 448 119622 SD AAD 492 1500 430 Ist WR A733 T4228 visions (Contin) 28 Weight in eg 2800 600 168 53 66 «= «83H BDH BS 104 i ‘ a ed % TABLE 15: (WEIGHTS IN KG & N) 16180200224 250 280315335 400] Standard Nome inal Thickness ‘Weiht in Standard Nom- | Size inal Surface Area} mm » mm 2069 2324 2589-2893 3236 619 407 SBD SITS Les 2800 » 600 2599 2912 3236 3619 HON 45382. 5095737 6462 210 750 3109 va 3883 A344 RAS S133 GlO9 BRA 7757 252 900 3452 3883 43154825 5394 HR. —GTRG TOAD. BaD 280 1000 M93 4265 A746 SBS $003 G39 7473 BALA NBS 3.08 1100 4138 4658 51785796 6462 7247S 9179 10346 436 1200 4315 48455394 6031 6737 7541-8483 986.1 10777 350 1250 48255033 GONE IST T8153 TOD 12072 392 1400 S178 S818 G462 7247 BORI_ 905110179 1147-4 12935 420 1300 2363 2658 2952 BIS M69.7 AIS 4658 S246 5913 ho 3200 » 600 2982 3324 36974138 4619 STB S815 656.1 739-4 240 750 355 390,133 4962 S544 GOS HRD 78S BAS 288 900 3942 M33 4923-5321 GSB Gw4 775787479856 320 1000 ana 4874 52367 6776758832962 10H. 332 1100 42.7 $325 $913 6619 7394 827.7 9.6 10856 11827 saa 1200 20233541 GSR GEDA TDR RAZ 969.9 10934 12317 400 250 552.1 6208 6892.4 7728 8679659 10866 12239 13798 ‘48 1300 5913 6649 7394-8277 9258 10346 NG IRI 14779 80 1300 ‘Weight in ke 211-237-264 SBD 369 SHER 5B Lea 2800 + 600 2a 29733069 41262519 SBS 59 210 750 317, 6 6 HS S88 302A 232 900 352396 440492550 GIS 62780879 20 1000 3879S ABA SH2— GA 67.7762 BSR_ 967. 3o0e 100 M2 75 328 591 9-39 -BB1_9RG_—1085 336 1200 a0 495550 OLS 687759 BS OTS 1099 330 1250 492 $84 GIS 68D 769 8H2_— 969102 BL 392 1400 S28 $93 659 T3D RAD. NHB MNT ALD 20 1300 21-1 3OL BT 422 ATS 53S OB 192 3200 690 gor 33937722 ATL 2B 393 DTS 240 750 362 407452506583 G33 12803904 2a8 300 407 452-302-563. @S OS WA HD 1005 320 1000 442497333. 61977898 332 4100 482 S43. «603.675 754 BA 95011071206 384 1200 502 568 @B 03 BSD ORY ILS 1256 4.00 1250 5093-3 TS RTD. ORS TOR 248 140.7 aa 1400 Go} 678-754 BAA 92 105$ 1871338 1507 480 1500) TABLE 16: ROLLED STEEL EQUAL ANGLE! | (DIMENSIONS AND PROPERTIES) | ee a re xtone Fie ‘ : cot as | on aan os cn Bs tn 05 " os a ° is rH ma oa ir fy ISA 2525. 3.0, 1at ay 108 om 199 t Bae +0 tat Ma a ons i 30 us i 1 on a oe 20 in a a ip ar at o ae a na on 23 30 in a ne oa ae wars 20 ae le 3? 35 ae at e tee af ne tee 2 30 Syke Bs toe as 0 a 30 Ba te ie } rsasouy 30 2 Ms 7 tae an | ae rH fora ae tn as 30 378 30 wa 116 aa | a ae s Ba 10 ae ISA 4535 20 264 2 206 120 330 { “Ba & af Fy es as | . 50 re iM 34 13 a @ son “o pa 13 a | { 134 3050 20 295 23 ns 132 ae | { at oe aa 30 Ba 1 pee | \ $0 va a3 co ae ee sees) i rer 36 ‘02 133 wy : sae 60 i tn as *0 aa is as io ms 13 a tsacaso 30 “a Les 4s soe 6 So le a1 *0 a7 in a no By tg a rsaesss $0 a in Ln a @ se a to © a3 i o 3 jaa in a (Contes 30 y volt i TABLE 16: u le TROLLED STEEL EQUAL ANGLES| jee ROLLED STEEL EQUAL ANGLES x ne & yr (DIMENSIONS AND PROPERTIES) set ayy ey yet Me v y Y ‘Moment of oer Moura Redhat Radusat Traduca? Designation ee fedion Roo Toe Inertia In Laky on n a cot cat on a uma a og 02 ast om ©0878 fo aso 182020 03 08 02 © osk om 7 a3 of 12 03 om om 087 ow 45 30 os rsazsas 4 to te 04 0m om oa? Os a 12 te 0s am ost oa? oF 07 | 14022 06 = 08d sos so 30k 1843020 (taf 070m a OsT ok 10 at 3409 ome AMO? 1 12 2336 09s ts aera soe saasas | 2 47012 toss 7 as 360 13 toe Ee) nt 416s 17108071 24 i 4s A tatase oma ss 0 Isa.ouo 4307) eats oma Fy \ S486 220 maka 32 \ <3 oo 26 0s 13007723 a7 3080 2000 mere oes ss oa Isaasas ic & ua 360 tar iso as 8 9 e320 tke ors ae 93 44s 381380? sa 6 ua 28 ie oa 6 30 at 18a 3080 S1o4s 36) 13 ogT as 33 uo 16 4812297 65 + ng 206 83st Bes asseay 16 wr ms $9 «Ae? atl tos 6s as wsassss : 3 27s) 702M 104 no 4991 Nes 20710657 ne 253 1512 tat 20310570 154 2 306 077012 6s as 18A.6060 me eo 310 to 2 ts 133 Bo wo ns te aa7s Ge 16 Beouo M6 | 18 323s 201 27 a4 991g) oases I8A6565 wl “3s 7 igh 380136 13 + 374 595 183496 BAT 1s no wo 7a 188 taeda 9 162 (Coninae 31 el Trucos Consist) TABLE 16: ROLLED STEEL EQUAL ANGLES (DIMENSIONS AND PROPERTIES) Tega ‘Ries Salim Wateprnte Coty me | | ‘e ‘te ‘5 ones | | fer) ' * arly ae ‘ en = mm am on &@ w cm eel 4 sano so om 3 so us su so ose © sie 202 icons eee 100 13.02 102 100.1 2.10 4900} : sass so am 37 339 202 sae | 7375 40 866 ee ee 206 sae to nae % "3 aa sae | v0 ior Mo 1079 an sae 1sagoxo 60 929 73 116 at sma 80 * 80 8.0. 1221 96 942 237 St ; 100 1505 us lise 24 566 | 120 n8i vo 3 he ss 159000 40 1047 22 sea 22 ose 3050 ao 179 108 1059 251 a9 109 Tio be iis 29 ca | no 2019 138 1380 266 ou | 4 1sA 10p100 60 ust 92 02 261 73 : 100 100 £0 1539 ma na? 26 a4 100 0s uo Moz asi 1s m0 ne i tae an x08 | sa1iono so vie ag ms 3.00 800 | A 100 toe tes 1st 308 in | tno 3500 be bs 36 wae | 150 ost 22 ia an in | 1s 130130 0 noma 19 160 350 90 To 100 06 7 13 ase oa | no bm Be me 366 o38 | 150 aes eo ans ae 34 Isa150150 00 2903 ne ma 406 wos | so 120 us za 2668 ae rome | 150 a7 ins a7 436 io eo 309 cd wis Os na | 1sa200200 10 eet 266 3390 536 464 S00 205 150 5780 asa 54 340 14st 180 ast 340 so ssi 139 350 ono ne m0 si iit 2 TABLE 16: [ ROLLED STEEL EQUAL ANGLES (DIMENSIONS AND PROPERTIES) oa 1267 m3 14st io 2070 ws0 2344 m6 3074 32K3 4027 4738 Ts ons 84 8968 rows 17889 21977 2588.7 34463 Moments of inertia oe 38 355 307 519 oa 33 6 lise. ls tera nee 65.4 2019 249 Vs ae 222 3293 sit 30s 4453 ssa ses oan 7589, gos crs \wa97 e082 2362.0 asus 1008 4609 Tn is 148 D3 at 153 tes 20 a4 ns 204 360 24 s26 ‘20 516 609 aa 54 ne a7 72 963, nsx 1393 nue ier wis 2350 2494 260 308 95 ns9 a7 146s uate Radi of Gpaton ats a 22 2 230 228 226 246 2H 2a 239 a7 275 27 30 307 308 303 338 336 a4 33 409 401 39 395 46 461 a3 as 620 617 613 605 zn 270 267 Rot 292 zo 298 2a au 308 304 30 350 aay an ast 588 3x8 3m 428 428 an a0 56 503 498 sa sme st 19, 7s, 708. a6 1s kas 136 13s 13s 1s Ls 178 174 18 Les 95 194 Low 214 24 21 23 255 254 254 233 20s aa 292 2 392 331 390 ae 1m “<4 uo ns 96 126 155 13 wr 160 ws ns 152 no 247 32 244 301 387 87 MS ‘27 503 3 569 67 mS 987 m2 isi 1799 23 Modutusef Radi at Seaton Zany oct 7a 10 8s loo tas no 10 Radio at Toe 6a too Product of 18 a7 no 2x a0 348 a7 a0 ‘27 sit 392 41a aus 745 865 657 Se 10s m6 us 0s reas 1970 42 2383 299 a7 3682 4950 591 6160 10589 012 15308 20157 Designation A707 Isa 7575 Isazo40 Isa 9090 184 100100 Isation0 184 130880 18A 150150 18200200 33 TABLE 17: ROLLED STEEL UNEQUAL AN (DIMENSIONS AND PROPERTIES) ‘LES 4M Designation ‘Thick Sectional Weight ‘Cone of Distnse of ‘Siee nes en per Gravity Estreme Fibre one toa ” a G 1803020 30 14 LL tos 09k 0” Im toes 47 2020s 50 228 18 177 106057 IsA4028 30 188 1S 147130087 aOea 40246 19 186138062 50 302 24 283 139 066 261 LR 60 356 28 275 143 069 287181 Isaasio 30 nue 17 167-142 a6) 308231 3030 4028s 22 216 187073 3032.27 so. 382 28 278 077299233 60 416 33 324 ost 798209 13a 5030, 302M 18 197 06s 337238 “Hem to 3e7 ads 07 333 330 so 3m 30 Ba 07 328 226 60 447 35 383 1% 07 © 325 2928 Isa 6040 50 47% 37 363 195 096 ans 3006 gos wr 60 Ses 44 2 199 100 401 300930 80 737 $8 369 207 Loe 393-292 254 kO OS Isagsas $0 526 41 402-207 0844s 342. da e545 60 62s 49 481 2112439338 26001 a 80 817 64 628 219 120 431330332387 sams $0 $42 43 422-227 Lod 4783s? R09 Teas 0 636 $2 $10 232, op ack 3.81 920103383 80 Rsk 67 637 240 Ae 460334 ato too 1052 83 Bld 248 1a 82325 493k ISA 7580 50 G02 47 461 239 46 S341 22394 BS 60 716 56 3490 2a 12050630 aa 80 938 74 726282 Lak 498 4106 wo 152 90 KS 26036490 na 1 Is 4050 50 627 49 48) 2012 S40. 406 467 4 0-50 60 74 59 379 26416, Boo $0 978 77 S| 2m 523% A oso wo 102 94 922 + 281 S19 368 47 at (Couting TABLE 17: [ROcLED STEEL UNEQUAL ANGLES (DIMENSIONS AND PROPERTIES) Rai of Gyaton ModitiofSesion tana Radiusat Radhusat roducter Designation Rect Toc Inertia, — as " n a cm oem mom ecw? mm mm cmt 092 058 099 oat os 3 on 45 30 os 184.9026 092 054 09 oat 08a. 0a as 091 053 097 oat 1004 oat 06 128 068 139 052 os 03850 30 09 1sa.4028 125 068 132 052 oe 036 12 124 067 332 082 oF 037 14 123 066 129 092 09 037 16 Lat od 152 068 07 oa 50 20 ts isaasa0 Tal ost 131 063 09 043 19 Tao 083 150 063 ut 043 23 139 og2 149 063 13 042 27 139 082 1467 068 07 0355. 30 7 18A3030 138 082 166 063 09 036 23 137 O81 16s 068 u 035 27 136 080 16s 068 13 038 3 189 112 202 o8s 42 20 om 60 40 38 Isacouo —-18 111 201 oss so 23 043 oe “Sits 110 ise os 6s 30 0 8s 208 128 222 096 a rc) 49 80 Isasas 208 127 201 09s 5930 on D4 02 125 218 oss 1739 0.46 8 222 126 236 096 372s. an 6s 40 a ISA 7048 221 125 235 096 ry oat 10s 219 124 232 098 8939 040 Ba 216 122 227 095 = 09 a8 039 13s 23a 182 256 1076732 oe 63 40 us Isa7550 237 ral 235 107 803 04 19 233 140 252 106 © tod a9 oa 117 233 138 24 1062760 oa 209 235 140 270 197 7832 03970 4s ns Isas0so 284 139 269 107 9038 039 152 32.137 265 106 L749 038 193 249 136 263 106 = 460 038 no (Continua 35 TABLE (7: [RocLED STEEL UNEQUAL ANGLES (DIMENSIONS AND PROPERTIES) Desigotion ——ThGk-Seional Weight —Cetieot Distnce of Sees Aen pee Gravity Extreme Fibre mee Ane asl * Q G&G & 6 oa mm emt Tg mcm cm em en 60 86S 6k 667287 139 GIB AL “Soa ko 137897306 ak Ok 2 100 1401 110 079 308135 «S96 Aas M20 1657 130 7S?) SRB 4ST Wsasoos 69 938 7S RG IY LA7_ RT S03 “Tires “80 1237 99 971328155 em A93 woo 1sst 422 97337, ek 6 18a 10073 60 11d 80 78S aR 699s “TW=75- RO 1336 105 108031017690 S83 10d 1630 (39 27S BUDS LSS 120 1956 154 15L1 327 203-673. 18412975 60 1166 92 903 408 159 kas Sar Ti5=75 80 i838 121 187418 ge 838 SD 100 1902 149 1462 428176826574 184 12508 60 1285 101 991 370 222 © 880728 “TSO 169K 133 BOS 3803819 Wo 2102 16S 16.9 388239 BTL 120 2498 196 1923 396247 BSA 703 180115075 40 178 137 144 5823153977507 S07 200 156 169 TSR 532 Ll 9885.88 i209 2862 20.1. 1972 19989 Sa ISAISONS —«-KO-20SK 162 _18RD 4462791084877 THOxTIS 100-2532 2001962485242 10S RGR 120 3038 238 235° 464 290 1036 R60 15g 37SL 19S 294-476 3021024 Ba 15A200100 100 2903 22% 237-696. 2OL_—13.04—799 “Fore = 120-3459 272 2658 70S 2101298790, 130 4278 336 306° 7k Ian 2778 18A2001590 100 3400267 2619 $993.8) 140 Rae “RO=TS 1204086 318 3120 GOR 3.601392 1140 Iso 5028 394 363 6203721380118 1205976 469 4601 632384367 LAG 36 voy TABLE 17 - on 4h Cx (DIMENSIONS AND PROPERTIES) ast hf owt 1-4 y Tai of Graton Modi of Secon tana Redivrat Radiovat™ Product of Designation oat” Too Inertia, — Zk , n 4 om gna om won? am mm ont ate 1M 307 18s 8S om 1s 50 us sA9060 2H 169 308 128 st 72 oat aus 281 167 301 127 ike ws oat a78 29 16s 298 127-0103 092 33 ae es uo 1392 on 80 ss 2s ISA 10065 Late is 338 139 ig? gs 042 20 —_ M4 1at 338138 tod oat 307 Liss: 29 a0 19 ua ks oss 8S 6a asav0s Miaodie 348138 ot ass 4 ap ils sas igs 6k Oss or Ho 2ia saz tse m9 63 ost 9 401 2100 423 1622 03790 60 561 18a 13575 400 202 421 161 4S 036 740 397 207 418 Let 363142 036 99 397 282 44 203° L140 057 90 60 B4s-— ISALa595 396-240 441 202 306 - 18S os7 H08 — 304 278 438 2020 1g 9 037 1350 a 391 276 438 2010 ak TT 036 1577 48 201 498 101718 027 00 60 983 Isa 1075 481097 496-159 Se 4S 026 1162 490197 493 «138 glad 026 1352 boy are aan san 24s a2 ose no 48 1959 ISAAsoLIS leats 339 5290 2480 S493 ose 210 4m 337 526 24d ga 02 ose 26 469 334 322 203 moat 037 sae 646 268 666 24 me 262 027 20 80 2Ree ISA 200100, 643 267 663 213 06 31 036 3353 640 264 639 (2126S a3 026 40s 637 446 706 321983 S83 oss as 9S S541 ISA 200150, Sas 442 708 321 7A 086 69.1 632 439 100 3201454860 oss sigs S28 436 698 319 1723019 2881 7 TABLE 18: ROLLED STEEL TEE BARS (DIMENSIONS AND PROPERTIES) Designation ISNT 20 ISNT 30 ISNT 40 ISNT 50 ISNT 60 ISNT 80 ISNT 100 ISNT 150 ISHT 75, ISHT 100 ISHT 125, ISHT 150 ISST 100 ISST 150 ISST 200 IST 250 ISLT 50 ISLT 75 ISLT 100 Isr 75 Isyr 87.5 Iss 100 Isyt 112.5 ‘Weight per mette Sectional Depth ww) —_—_ kg ON 09 88 ay 13.7) 35 M3 45 44 s4 53.0 96 942 150 147.2 28 2237 153150. 200 196.2 274 268.8 29.4 2884 Bl 795 15.7 1540 284 2786 375 367.9 40 392 1 697 12.7 1246 35° M43 40 392 50 490 64 628 Area a cm? 13 Ls 448 5.70 6.90 1228 19.10 29.08 19.49 2547 34.85 37.42 1037 19.96 36.22 47.75 sal 9.04 16.16 4.50 Sd 632 Bd ih Thick- of of nessof Section Flange Flange h bo mm mm mum 20 mw 30 30 303 0 40 60 50 806 0 6060 80 80RD 100 100100 150 150 10.0 75 1509.0 100 200-90 1s 2509.7 150 250 106 100 100 150 116 200 125 2500 1801 30M 6d 713% 68 100 100 10.8 3B 50 46 875548 1 5.0 125° 8050 Thick- ness of ‘Web 4, mm 30 20 60 60 60 80 100 100 84 18 8B 16 58 86 80 92 40 48 37 3.0 32 34 37 Centre Moments of Inertia Gravity a om 060 4 ag 120 63 14s 127 167 225 223 712 2.79 IB 3.95 603.8 26 162 96.2% Lol 193.8 4 237 415.4 I 2.66 $73.7 1 3.03 99.0 4.75 450.2 478 12678 3 640 27744 5 Li 99 A724 213 1166 2.00 24.8 2.50 39.0 281 63S 3.01 1016 8 © TABLE 18: | ROLLED STEEL TEE BARS (DIMENSIONS AND PROPERTIES) Radi of Moduliof ‘RadiusatRadiusat Slope of Designation Gyration Section Root Toe Flange cm cm cm ca” mm mm degrees 059 039 03 02 40 30 n IsNT20 os 037 06 od so 38 1 IsNT30 Lis om 2215 38 49 1 IsNT40 150102 36024 60 40 a1 ISNT 50 vst at 5234 6s 4s ” ISNT 60 2a 10 R384 50 ss 1 ISNT 80 302205 460 00 60 n ISNT 100 43610346387 oo 10 1 ISNT 150 222344 64301 80 40 4 ISHT 75 2% 48, O93 90 4s 4 IsHT 100 345537410799 00 50 %4 ISHT 125 392 Sal a6 877 10 ss %4 isu 150 3090964 80 40 %% Isst 100 - Asus oo 4s o% sm 315 3a 160 80 ox iss 200 70 33892 Saud me 85 78 Iss 250 13942 2628 70 30 ous ISLT 50 nis 13s 22 69 os 30 os ist 7s 2621S MBAS 110 ss 8 IsLT 100 235101 45°18 50 1s os sir75 275097 62 19 50 is ols isrrans aia 8829 50 as ous assr 100 333138 3st 6s Us os assraras Tm ISNT sections the taper of one degree Is divided equally between the web and the Ange ” y TABLE 19 — | | b ROLLED STEEL BEAMS (DIMENSIONS AND PROPERTIES) Devgnstinn Weigh per Mee Scstinal Depth Width Thisknes Thickness Moments of Inertia Rai of o ‘ca ofa cee gr Seon Hage ange Web

You might also like