AISC MEMBER DIMENSIONS AND PROPERTIES VIEWER

W, S, M, HP Shapes C, MC Shapes WT, ST, MT Shapes Single Angles Double Angles Rectangular HSS

Y Y Y
k1=0,8125 Y Y Y
k=1,12 tf=0,62 tf=0,39 b=2,5 t=0,174
bf=8,02 t=0,25
y(bar)=0,907 x(bar)=0,854
x(bar)=0,572 tf=0,62 d=5 t=0,375 X
d=10,1 T X d=8 X X d=2 h=8 X
d=5,05 X y(bar)=1,6
tw=0,35 tw=0,22 tw=0,35 b=3,5
(0, 3/8, or 3/4
bf=8,02 bf=2,26 gap) b=6

W10x45 C8x11.5 WT5x22.5 L5x3-1/2x3/8 2L2-1/2x2x1/4SLBB HSS8x6x3/16

A= 13.30 in.^2 A= 3.37 in.^2 A= 6.63 in.^2 d= 5 in. d= 2 in. h= 8 in.
d= 10.100 in. d= 8.000 in. d= 5.050 in. b= 3.5 in. b= 2.5 in. b= 6 in.
tw = 0.350 in. tw = 0.220 in. tw = 0.350 in. t= 0.375 in. t= 0.25 in. t= 0.174 in.
bf = 8.020 in. bf = 2.260 in. bf = 8.020 in. k= 0.8125 in. k= 0.5000 in. wt./ft. = 17.10 plf.
tf = 0.620 in. tf = 0.390 in. tf = 0.620 in. wt./ft. = 10.40 plf. wt./ft. = 7.30 plf. A= 4.67 in.^2
T= 7-1/2 in. T= 6-1/8 in. k= 1.1200 in. A= 3.05 in.^2 A= 2.14 in.^2 Ix = 43.70 in.^4
k= 1.1200 in. k= 0.9375 in. Ix = 10.20 in.^4 Ix = 7.75 in.^4 Ix = 0.74 in.^4 Sx = 10.90 in.^3
k1 = 0.8125 in. gage = 1-3/8 in. Sx = 2.47 in.^3 Sx = 2.28 in.^3 Sx = 0.51 in.^3 rx = 3.060 in.
gage = 5-1/2 in. x(bar) = 0.572 in. rx = 1.240 in. rx = 1.590 in. rx = 0.589 in. Iy = 28.20 in.^4
rt = 2.180 in. eo = 0.697 in. y(bar) = 0.907 in. y(bar) = 1.600 in. y(bar) = 0.532 in. Sy = 9.39 in.^3
d/Af = 2.03 d/Af = 9.08 Iy = 26.70 in.^4 Iy = 3.15 in.^4 ry(0) = 1.100 in. ry = 2.460 in.
Ix = 248.00 in.^4 Ix = 32.50 in.^4 Sy = 6.65 in.^3 Sy = 1.19 in.^3 ry(3/8) = 1.240 in. Zx = 13.00 in.^3
Sx = 49.10 in.^3 Sx = 8.14 in.^3 ry = 2.010 in. ry = 1.020 in. ry(3/4) = 1.390 in. Zy = 10.70 in.^3
rx = 4.320 in. rx = 3.110 in. J= 0.753 in.^4 x(bar) = 0.854 in. ro(bar) = 1.32 in. J= 53.70 in.^4
Iy = 53.40 in.^4 Iy = 1.31 in.^4 Cw = 0.981 in.^6 rz = 0.755 in. H= 0.904
Sy = 13.30 in.^3 Sy = 0.78 in.^3 a= 1.84 in. TAN(a ) = 0.486 Round HSS & Pipes
ry = 2.010 in. ry = 0.623 in. ro(bar) = 2.43 in. J= 0.15 in.^4 Y
Zx = 54.90 in.^3 J= 0.13 in.^4 H= 0.940 Cw = 0.217 in.^6 Plates t=0,322
Zy = 20.30 in.^3 Cw = 16.5 in.^6 a= 1.94 in. Y
J= 1.51 in.^4 a= 18.13 in. ro(bar) = 2.45 in. t=0,375
Cw = 1200 in.^6 ro(bar) = 3.41 in. H= --- X O.D.=8,63 X
a= 45.36 in. H= 0.862 b=12
Wno = 19.00 in.^2 I.D.=7,98
Sw = 23.60 in.^4 t= 0.375 in.
Qf = 11.30 in.^3 b= 12 in. PIPE8STD
Qw = 27.00 in.^3 wt./ft. = 15.31 plf. O.D. = 8.63 in.
A= 4.500 in.^2 I.D. = 7.98 in.
Ix = 0.053 in.^4 t= 0.322 in.
Sx = 0.281 in.^3 wt./ft. = 28.60 plf.
Reference: rx = 0.108 in. A= 8.40 in.^2
The shapes contained in this database are a
Iy = 54.000 in.^4 I= 72.50 in.^4
compilation of those listed in the current AISC
"Shapes Database" CD-ROM VersionSy 3.0= (June, 9.000 in.^3 S= 16.80 in.^3
ry = 9th
2001), as well as those listed in the AISC 3.464 in. r= 2.940 in.
Edition Manual of Steel Construction (1989).
J= 54.053 in.^4 J= 145.00 in.^4
NOMENCLATURE FOR AISC MEMBER PROPERTIES AND DIMENSIONS:

A = Cross-sectional area of member (in.^2)

d = Overall depth of member, parallel to Y-axis (in.)
tw = Thickness of web of member (in.)
bf = Width of flange of member (in.)
tf = Thickness of flange of member (in.)
T = Distance between fillets for wide-flange or channel shape (in.) = d-(2*k)
k = Distance from outer face of flange to web toe of fillet (in.)
k1 = Distance from web centerline to flange toe of fillet (in.)
gage = Standard gage (bolt spacing) for member (in.) (Note: gages for angles are available by viewing comment box at cell K18.)
rt = Radius of gyration of compression flange plus 1/3 of compression web area, taken about an axis in plane of web (in.)
d/Af = Ratio of of total depth of member to area of compression flange of member = d/(b f*tf)
Ix = Moment of inertia of member taken about X-axis (in.^4)
Sx = Elastic section modulus of member taken about X-axis (in.^3)
rx = Radius of gyration of member taken about X-axis (in.) = SQRT(I x/A)
Iy = Moment of inertia of member taken about Y-axis (in.^4)
Sy = Elastic section modulus of member taken about Y-axis (in.^3)
ry = Radius of gyration of member taken about Y-axis (in.) = SQRT(I y/A)
Zx = Plastic section modulus of member taken about X-axis (in.^3)
Zy = Plastic section modulus of member taken about Y-axis (in.^3)
J = Torsional constant of member (in.^4)
Cw = Warping constant (in.^6)
a = Torsional property, a = SQRT(E*Cw/G*J)
E = Modulus of elasticity of steel = 29,000 ksi
G = Shear modulus of elasticity of steel = 11,200 ksi
Wno = Normalized warping function at a point at the flange edge (in.^2)
Sw = Warping statical moment at a point on the cross section (in.^4)
Qf = Statical moment for a point in the flange directly above the vertical edge of the web (in.^3)
Qw = Statical moment at the mid-depth of the section (in.^3)
x(bar) = Distance from outside face of web of channel shape to Y-axis (in.)
eo = Horizontal distance from the outer edge of a channel web to its shear center (in.) = (approx.) t f*(d-tf)^2*(bf-tw/2)^2/(4*Ix)-tw/2
xo = x-coordinate of shear center with respect to the centroid of the section (in.)
yo = y-coordinate of shear center with respect to the centroid of the section (in.)
ro(bar) = Polar radius of gyration about the shear center (in.) = SQRT(xo^2+yo^2+(Ix+Iy)/A)
H = Flexural constant, H = 1-(xo^2+yo^2)/ro(bar)^2)
LLBB = Long legs back-to-back for double angles
SLBB = Short legs back-to-back for double angles
STD = Standard weight (Schedule 40) pipe section
XS = Extra strong (Schedule 80) pipe section
XXS = Double-extra strong pipe section
 EJEMPLO 2-7.
Determine las resistencias de diseño por tensión LRFD y de diseño por tensión permisible ASD
Suponga que hay por lo menos tres tornillos en cada línea a 4 plg entre centros y que los tornillo

DATOS unidades
D 0.75 plg
l 8 plg
Perfil W10X45
Acero A572 grado 50
Fy 50 Ksi
Fu 65 Ksi

Solucion
Perfil W10x39
Ag 11.5 plg^2 An
d 9.92 plg U
bf 7.99 plg U valor a usar
tf 0.53 plg Ae

Mitad del
perfil WT5x22.5
𝑿 ̅ 0.907 plg

LFRD:

∅𝑡𝑃𝑛=∅𝑡𝐹𝑦𝐴𝑔= 517.5
∅𝑡𝑃𝑛=∅𝑡𝐹u𝐴e= 422.71
por tensión permisible ASD de una W10×45 con dos líneas de tornillos de 3⁄4 (plg) de diámetro en cada patín usando acero A572 grado
tre centros y que los tornillos no están a tresbolillo entre sí.

9.63 plg^2
0.89 plg^2
0.9 plg^2
8.67 plg^2

ASD:

klb 𝑃𝑛/Ω𝑡=𝐹𝑦*𝐴𝑔/Ω𝑡= 344.31 klb

klb 𝑃𝑛/Ω𝑡=𝐹u*𝐴e/Ω𝑡= 281.81 klb
n usando acero A572 grado 50 con Fy=50 ksi y Fu=65 ksi y la Especificación AISC.
 EJEMPLO 2-8.
Determine las resistencias de diseño LRFD y permisible ASD de una sección C9×20 (Fy=36 ksi,Fu=

Datos
l 6
D 0.875 plg
Perfil C9X20
Fy 36 ksi
Fu 58 ksi

Solucion
Perfil C9x20
Ag 5.87 plg^2
tw 0.448 plg
𝑿 ̅ 0.583 plg

An 4.97 plg^2
U 0.90
Ae 4.49 plg^2
LFRD:

∅𝑡𝑃𝑛=∅𝑡𝐹𝑦𝐴𝑔= 190.188 klb

∅𝑡𝑃𝑛=∅𝑡𝐹u𝐴e= 195.35 klb
una sección C9×20 (Fy=36 ksi,Fu=58 ksi) con 2 líneas de tornillos de 3⁄4 (plg) de ∅ en el alma como muestra la figura.

ASD:

𝑃𝑛/Ω𝑡=𝐹𝑦*𝐴𝑔/Ω𝑡= 126.54 klb

𝑃𝑛/Ω𝑡=𝐹u*𝐴e/Ω𝑡= 130.23 klb
estra la figura.
EJEMPLO 2-9.
El elemento a tensión (Fy=50 ksi y Fu=65 ksi) del ejemplo 2-7 se supone conectado en sus extremo
tornillos de 3⁄4 plg, determinar la fuerza de diseño a tensión LRFD y la fuerza permisible a tensión A

Datos
l 6 plg
D (2 hileras) 0.75 plg
Placa 3/8x12
Fy 50 ksi
Fu 65 ksi

Solucion

Placa 3/8x12
Ag 9 plg^2

An 7.50 plg^2
Condiseracion
85% 7.65 plg^2
Ae 7.65 plg^2

LFRD:

∅𝑡𝑃𝑛=∅𝑡𝐹𝑦𝐴𝑔= 405
∅𝑡𝑃𝑛=∅𝑡𝐹u𝐴e= 372.94

Cálculos adicionales: Determinar el espesor de las placas de conexión para que tengan la misma

LFRD:

An 8.67
Ag 10.20
conectado en sus extremos con dos placas de 3⁄8×12 plg, como se muestra en la figura. Si en cada placa se usan dos hileras de
erza permisible a tensión ASD que las dos placas pueden transmitir.

ASD:

klb 𝑃𝑛/Ω𝑡=𝐹𝑦*𝐴𝑔/Ω𝑡= 269.46 klb

klb 𝑃𝑛/Ω𝑡=𝐹u*𝐴e/Ω𝑡= 248.63 klb

para que tengan la misma resistencia que el perfil.

ASD:

plg^2 An 8.67 plg^2

plg^2
e usan dos hileras de
EJEMPLO 2-10.
El elemento de acero A572 grado 50 (F_u=65 ksi) en tensión mostrado en la figura está conectado c
bloque de cortante LRFD y la resistencia a la fractura permisible del bloque de cortante ASD del per
diseño por tensión permisible ASD del perfil.
ado en la figura está conectado con tres tornillos de 3⁄4 plg. Determine la resistencia a la fractura del
bloque de cortante ASD del perfil. También calcule las resistencias de diseño por tensión LRFD y de
EJEMPLO 2-11.
Determine la resistencia de diseño LRFD y la resistencia permisible ASD de las placas de acero A36
por bloque de cortante en los cálculos.
ASD de las placas de acero A36 (F_y=36 ksi,F_u=58 ksi ) mostradas en la figura. Incluya la resistencia
EJEMPLO 2-12.
Determine la resistencia de diseño a la tensión LRFD y la resistencia a la tensión ASD de la W12×3
plg en la conexión. Incluya los cálculos de bloque de cortante para los patines.

DATOS: Ingresar
ɸtPn =? LRFD Fy 50 ksi
𝑃𝑛/Ω𝑡=?→ASD Fu 65 ksi
𝑅𝑛/Ω=?→ASD D 0.88 pulg
∅𝑅𝑛=?→LRFD
Forma Ag d tw bf tf
W12x30 Err:508 Err:508 0.26 Err:508 Err:508
Forma 2 𝑿 ̅
WT6x15 Err:508

Solución:
An Err:508 plg2
U Err:508

23𝑑=23(12.3)=8.2 plg→𝑏𝑓<23𝑑→𝑈=0.85←

U 0.85
Ae Err:508

LFRD:

∅𝑡𝑃𝑛=∅𝑡𝐹𝑦� Err:508 klb

∅𝑡𝑃𝑛=∅𝑡𝐹u� Err:508 klb

Agv 17.6 plg2

Anv 13.2 plg2
Ant 1.78 plg2
𝑅𝑛 = 0.6𝐹𝑢𝐴𝑛𝑣 + 𝑈𝑏𝑠𝐹𝑢𝐴𝑛𝑡 ≤ 0.6𝐹𝑦𝐴𝑔𝑣 + 𝑈𝑏𝑠𝐹𝑢
Rn 630.34 ≤
∴ Rn 630.34
 LFRD:

∅R𝑛= 472.76 klb

∅tP𝑛= Err:508 klb
 nsión ASD de la W12×30 (F_y=50 ksi,F_u=65 ksi ) que se muestra en la figura si se usan tornillos de 7⁄8
nes.

ASD:

𝑃𝑛/Ω𝑡=𝐹𝑦*� Err:508 klb

𝑃𝑛/Ω𝑡=𝐹u*� Err:508 klb

≤ 0.6𝐹𝑦𝐴𝑔𝑣 + 𝑈𝑏𝑠𝐹𝑢𝐴𝑛𝑡
643.54
klb
 ASD:

R𝑛/Ω= 315.172 klb

P𝑛/Ωt= Err:508 klb