@Perkins

400 Series
Diesel engine - ElectropaK
404C-22G
20.4 kWm 1500 rev/min
22.6 kWm 1800 rev/min
33.9 kWm 3000 rev/min

The Perkins 400 Series provides Compact, Efficient power

compact power from a robust A class-leading engine package coupled with an innovative, newly designed cooling
family of 2, 3 and 4 cylinder pack provides optimum power density, making installation and transportation easier and
diesel engines, designed to meet cheaper. This package has been specially designed to hit the key power nodes required
today’s uncomprimising by the power generation industry.
demands within the power
generation industry.
Quiet, clean power
The 404C-22G is a compact The 404C-22G has an exceptionally low noise signature making it the ideal choice for
4-cylinder naturally aspirated power generation in any environment. A high compression ratio also ensures clean rapid
diesel engine. It’s premium starting in all conditions. Design features ensure maximum cleanliness in terms of
features provide economic and emissions throughout the engines operating life.
durable operation for standby
duty, low gaseous emissions, Reliable power
overall performance and Developed and tested using the latest engineering techniques this engine reliably
reliability. provides power when you need it.
Operating and maintenance costs are reduced through excellent fuel and oil economy
whilst whole-life costs are enhanced by a 500 hour service interval and a 2 year
warranty.
Excellent service access further improves maintenance and support is provided by a
worldwide network of 4000 distributors and dealers.

Engine speed Type of Typical generator Engine Power

rev/min Operation output (net) Gross Net
KVA kWe kW bhp kW bhp
1500 Prime Power 20.3 16.3 18.7 25.1 18.5 24.8
Standby (maximum) 22.7 18.2 20.6 27.6 20.4 27.4
1800 Prime Power 23.4 18.7 22.0 29.5 20.7 27.8
Standby (maximum) 25.3 20.2 24.3 32.6 22.6 30.3
3000 Prime Power 33.8 27.0 31.2 41.8 30.7 41.2
Standby (maximum) 36.7 29.3 34.4 46.1 33.9 45.5

The above ratings represent the engine performance capabilities to conditions specified in ISO 8528/1, ISO 3046/1:1986, BS5514/1
Derating may be required for conditions outside these; consult Perkins Engines Company Limited
Generator powers are typical and are based on typical alternator efficiencies and a power factor (cos.0) of 0.8
Fuel specification: BS 2869: Part 2 1998 Class A2 or ASTM D975 D2
Lubricating oil: To API CH4/ACEA E5
Rating Definitions
Prime Power: Power available at variable load in lieu of a main power network. Overload of 10% is permitted for 1 hour in every 12 hours’ operation
Standby (maximum): Power available at variable load in the event of a main power network failure. No overload is permitted
400 Series
404C-22G
Standard ElectropaK
Specification

Air Inlet
Mounted air filters
Fuel System
Mechanically governed cassette type fuel injection pump
Spin-on full flow fuel filter
Lubrication System General Data
Wet steel sump with filler and dipstick
Spin-on-full-flow lub. oil filter
Number of cylinders 4
Cooling System Cylinder Arrangement Vertical in-line
Thermostatically-controlled system with belt driven circulating Cycle 4 stroke
pump and pusher fan Induction System Natural Aspiration
Mounted radiator and piping Combustion System Indirect injection
Electrical Equipment Cooling System Water-cooled
12 Volt starter motor and 12 Volt 55 Amp alternator with Bore & Stroke 84 x 100mm
DC output Displacement 2216cc
Oil pressure and coolant temperature switches Compression Ratio 23.3:1
12 Volt shut off solenoid energised to run Direction of Rotation Anti-clockwise viewed on flywheel
Glow plug cold start aid and heater/starter switch Total Lubrication System
Flywheel and Housing Capacity 10.6 litres
Total Coolant Capacity 6.98 litres
1500/1800 rev/min
Length 935mm
High inertia flywheel to SAE J620 Size 71/2 Heavy
Width 498.5mm
Flywheel housing SAE 4 Long
Height 890mm
3000/3600 rev/min
Dry Weight (Engine) 242 kg (1500/1800 rev/min)
High inertia flywheel to SAE J620 Size 71/2 Light
218 kg (3000 rev/min)
Flywheel housing SAE 4 Short
Mountings
Fuel Consumption
Front and rear mounting bracket
Engine speed 1500 rev/min 1800 rev/min 3000 rev/min
Literature g/kWh l/hr g/kWh l/hr g/kWh l/hr
User’s Handbook At Standby Rating 254 6.2 252 7.3 254 10.4
At Prime Power 243 5.4 245 6.4 256 9.5
At 75% Prime Power 243 4.0 247 4.8 269 7.5
At 50% Prime Power 265 2.9 269 3.5 313 5.8
Optional Equipment
Exhaust silencer
Workshop manual 935 mm 498.5 mm
Publication Number: 1664/5/02 Printed in England © Perkins Engines Company Limited 2002
Parts book

890 mm

@Perkins 822 mm

Perkins Engines Company Limited

Peterborough PE1 5NA
United Kingdom
Telephone +44 (0)1733 583000 Distributed by
Fax +44 (0)1733 582240
www.perkins.com

All information in this leaflet is substantially correct at the time of printing but may be
changed subsequently by the Company