Scribd
Upload
333 views

How To Assemble A Temperature Probe To A Swagelok Adapter

The document provides instructions for assembling a temperature probe to a Swagelok 1/4 to 1/8 inch tube adapter using nylon ferrules. The adapter fittings can be used to connect the temperature probe to rotameters or other flow measurement devices. An example shows the adapter fittings connecting a temperature probe and pressure line to a rotameter and pressure monitor.

Uploaded by

Cesar Bravo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
333 views

How To Assemble A Temperature Probe To A Swagelok Adapter

The document provides instructions for assembling a temperature probe to a Swagelok 1/4 to 1/8 inch tube adapter using nylon ferrules. The adapter fittings can be used to connect the temperature probe to rotameters or other flow measurement devices. An example shows the adapter fittings connecting a temperature probe and pressure line to a rotameter and pressure monitor.

Uploaded by

Cesar Bravo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

How to assemble a temperature probe to a Swagelok 1/4 to 1/8 inch tube

adapter with nylon ferrules (to prevent damage to probe)


Not tightened Tightened

Swagelok parts
Not bored through (would have to drill through to fit probe through)
Example below of above fittings attached to rotameter, along with another adapter for a 1/8 inch pressure line to a pressure monitor. Could
also use a ¼ inch line to the pressure monitor. Also note that in this example the gas will flow through ¼ inch fittings that might restrict the flow.
The same adapter fittings can also be adapted to larger fittings that the gas will flow through. If so, the temperature probe can be inserted in
one of the other fittings on the tee so the opposing fitting can be adapted to a larger size.

Temperature tap
Not tightened

Adapter to ¼ inch pressure tap


larger tubing

Larger tubing

Flow path
molbox1+ and molbloc for flow measurement, RPM4 for pressure measurement and 1524 for temperature measurement
molbox RFM and molbloc for flow measurement, RPM4 for pressure measurement and 1524 for temperature measurement

You might also like