Scribd
Upload
255 views11 pages

Port Forwarding and Remote Monitoring of CCTV PDF

This document provides a quick guide for remote monitoring of devices like DVRs and IP cameras via PC or mobile phone. It outlines the steps to connect the devices to a router and configure the necessary network and remote access settings on the devices and router. This includes assigning IP addresses, configuring ports, and setting up services like HiDDNS. It also describes how to register a device on the iVMS-4500 app to enable remote viewing from a mobile phone.

Uploaded by

adheindra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
255 views11 pages

Port Forwarding and Remote Monitoring of CCTV PDF

This document provides a quick guide for remote monitoring of devices like DVRs and IP cameras via PC or mobile phone. It outlines the steps to connect the devices to a router and configure the necessary network and remote access settings on the devices and router. This includes assigning IP addresses, configuring ports, and setting up services like HiDDNS. It also describes how to register a device on the iVMS-4500 app to enable remote viewing from a mobile phone.

Uploaded by

adheindra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 11

HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

Quick Guide of Remote Monitoring via PC or


Mobile Phone
(DVR or NVR as the back-end surveillance device)

Thank you for purchasing our product. This manual applies to remote viewing via
PC or mobile phone. Please read it carefully for remote monitoring.
If you would encounter any relevant problems, please contact us.

1
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone
1. Device Connection
At first, you should connect your device in accordance with the followed image:

Router

During the followed settings, the linkage should be always kept as above.
2. Set DVR/NVR/IPC
For IPC:
First you need to modify the IP of your network camera, and you may modify it by
directly connecting your IPC with your computer with a network cable.

The default IP of your network camera is 192.0.0.64. To get access to IPC, you
need to first modify your PC into the same segment as 192.0.0.xx. Then you type
2
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone
the 192.0.0.64 in the IE browser.
Then you should modify the IP of network camera to the same segment as your
router (such as 192.168.1.xx) and the default gateway (such as 192.168.1.1).

At last, change the IP of your PC to automatically obtain an IP.

For DVR/NVR:
Arrange the DVR a monitor and control the DVR:
In the “Menu—Configuration—Network”, you should fill in as followed:

3
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

The “IPV4 Address” is the IP of your DVR, which should be in the same network
segment with the IP of your router.

And the other items can be set as above or default. Do not tick the “Enable DHCP”.

After the above settings, click “Apply” on the right bottom of the screen.

In “More Settings”, set the relevant port No. The other items of this page are as
default.

*If your IP is not stable, you may use Hikvision’s domain name referring to the
followed illustration:

4
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

After the above settings, click “Apply” on the right bottom of the screen.

3. Set Router
In the router menu of “Forwarding—Virtual Servers”, click “Add New” to add at
least 3 ports, which is in accordance with that set in DVR. The IP address is the
same as that of DVR. You should also close the Upnp and DMZ function to avoid
the disturbance.

5
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

Notice:

The default No. of Server Port (for client software viewing) is 8000, which can be
effective from 2000 to 65535;

The default No. of HTTP Port (for PC web viewing) is 80, which can be effective
from 1 to 65535;

The default No. of RTSP Port is 554 (for getting data from afar, some DVRs do not
have RTSP Port), which can also be effective from 1024 to 65535.

Sometimes 80 or 8000 may be occupied by some other applications or webs, so


you may change them respectively to 81/82 or 8001/8002.

If you modify 80 to any other No., you need to type “Colon + Port No.” after the
public IP or address in the web browser as you view the image remotely. (Such as
“http://57.63.91.12:81”)

*4. Set HiDDNS/EasyDDNS


If you registered in Hikvision domain name (mainly for unstable IP) in the * item
of the second step “2.Set DVR/NVR”, you should visit www.hik-online.com to
complete your registration:

First you need to register a new user:

6
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

Second you need to access “Device Management—Add” to fill in:

Notice: “Device name” should be in accordance with the domain name you have
set in the DVR. Or the domain name will be modified to the current “Device name”
you set in this page.

7
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

If you registered successfully, the address under the “Device Link URL” will be
blue and with underline. Click it and then you can visit the web accessing page.

5. Mobile phone or tablet PC remote viewing


First you need to search for and install “iVMS-4500” from google or App store.
And then you need to add your device in the software.

Steps:

1) Click or and select to enter the Device Management interface.

8
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

2) Click or to add a new device.

3) Edit the device name (as you like, not domain name here) in the Alias field.
4) Click the Register Mode item to select the register mode of the device to
HiDDNS, IP/Domain, or IP Server, and configure the corresponding settings.
HiDDNS: When the device is registered on the HiDDNS server, you need to
enter the HiDDNS server address and the device domain name registered on
the server.
9
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone
IP/Domain: You can access the device through fixed IP address or domain
name. You need to edit the IP address or domain address and the port of the
device.

IP Server: You can access the device through IP Server. You need to set the IP
Server address, and device identifier which is the device name or device serial
No..

5) Enter the login user name and password of the device to be added.
6) Click to confirm the settings.
Notes:

If the device is successfully added, you can click to lively view the
newly added device.

Click to return to the Device Management interface. The successfully added


new device will be displayed in the Device Management interface.

10
HIKVISION Quick Guide of Remote Monitoring via PC or Mobile Phone

11

You might also like