Scribd
Upload
99 views

Steel Design: Project Job Number Engineer

The document summarizes the steel section check for a column member (Frame 15876) under a specific load combination (ULS_1.35D+0.75S+0Design). It finds that the demand to capacity ratio for the combined bending and axial load is 0.463, which is less than the limit of 0.950 and therefore OK. It also checks the axial force, bending moments, shear, and torsional stresses and finds they all meet capacity. The column member and load combination pass all checks according to Eurocode 3-2005 design standards.

Uploaded by

onuroztk
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
99 views

Steel Design: Project Job Number Engineer

The document summarizes the steel section check for a column member (Frame 15876) under a specific load combination (ULS_1.35D+0.75S+0Design). It finds that the demand to capacity ratio for the combined bending and axial load is 0.463, which is less than the limit of 0.950 and therefore OK. It also checks the axial force, bending moments, shear, and torsional stresses and finds they all meet capacity. The column member and load combination pass all checks according to Eurocode 3-2005 design standards.

Uploaded by

onuroztk
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAP2000 Steel Design Project

Job Number
Engineer

Eurocode 3-2005 STEEL SECTION CHECK (Summary for Combo and Station)
Units : KN, m, C

Frame : 15876 X Mid: 106.500 Combo: ULS_1.35D+0.75S+0Design Type: Column


Length: 4.700 Y Mid: 1.610 Shape: IPE200 Frame Type: DCM-CBF
Loc : 0.000 Z Mid: -2.450 Class: Class 1 Rolled : Yes

Country=CEN Default Combination=Eq. 6.10 Reliability=Class 2


Interaction=Method 2 (Annex B) MultiResponse=Envelopes P-Delta Done? No
Ignore Seismic Code? No Ignore Special EQ Load? No D/P Plug Welded? Yes

GammaM0=1.00 GammaM1=1.00 GammaM2=1.25


q=4.00 Omega=1.00 GammaOV=1.36
An/Ag=1.00 RLLF=1.000 PLLF=1.000 D/C Lim=0.950

Aeff=0.003 eNy=0.000 eNz=0.000


A=0.003 Iyy=1.943E-05 iyy=0.083 Wel,yy=1.943E-04 Weff,yy=1.943E-04
It=0.000 Izz=1.420E-06 izz=0.022 Wel,zz=2.840E-05 Weff,zz=2.840E-05
Iw=0.000 Iyz=0.000 h=0.200 Wpl,yy=2.210E-04 Av,z=0.002
E=205939654.2 fy=274586.206 fu=431492.609 Wpl,zz=4.460E-05 Av,y=0.001

STRESS CHECK FORCES & MOMENTS


Location Ned Med,yy Med,zz Ved,z Ved,y Ted
0.000 -253.361 0.000 0.000 0.000 0.045 0.000

PMM DEMAND/CAPACITY RATIO (Governing Equation EC3 6.3.3(4)-6.62)


D/C Ratio: 0.463 = 0.453 + 0.000 + 0.010 < 0.950 OK
= NEd/(Chi_z NRk/GammaM1) + kzy (My,Ed+NEd eNy)/(Chi_LT My,Rk/GammaM1)
+ kzz (Mz,Ed+NEd eNz)/(Mz,Rk/GammaM1) (EC3 6.3.3(4)-6.62)

AXIAL FORCE DESIGN


Ned Nc,Rd Nt,Rd
Force Capacity Capacity
Axial -253.361 782.571 782.571

Npl,Rd Nu,Rd Ncr,T Ncr,TF An/Ag


782.571 885.423 2222.863 2222.863 1.000

Curve Alpha Ncr LambdaBar Phi Chi Nb,Rd


Major (y-y) a 0.210 1787.791 0.662 0.767 0.865 676.956
MajorB(y-y) a 0.210 1787.791 0.662 0.767 0.865 676.956
Minor (z-z) b 0.340 1175.912 0.816 0.937 0.715 559.276
MinorB(z-z) b 0.340 1175.912 0.816 0.937 0.715 559.276
Torsional TF b 0.340 2222.863 0.593 0.743 0.840 657.661

MOMENT DESIGN
Med Med,span Mc,Rd Mv,Rd Mn,Rd Mb,Rd
Moment Moment Capacity Capacity Capacity Capacity
Major (y-y) 0.000 0.000 60.684 60.684 51.409 52.472
Minor (z-z) 0.000 0.172 12.247 12.247 12.247

Curve AlphaLT LambdaBarLT PhiLT ChiLT C1 Mcr


LTB a 0.210 0.662 0.768 0.865 1.000 138.285

kyy kyz kzy kzz


Factors 1.173 0.407 0.951 0.678

SHEAR DESIGN
Ved Vc,Rd Stress Status Ted
Force Capacity Ratio Check Torsion
Major (z) 0.000 222.199 0.000 OK 0.000
Minor (y) 0.045 289.353 0.000 OK 0.000

Vpl,Rd Eta LambdabarW


Reduction 222.199 1.200 0.409

SAP2000 v16.1.1 - File:D:\BACK UP-ONUR OZTURK\PROJELER_ONUR\19811- BEDESCHI\SAP2000\200414_BC1_CONVEYOR


Mayýs 13, 2020TRUSS_2
14:44

You might also like