Oilfield Mechanical 3406C

3408C
Rig Power 3412C

The outstanding performance of Caterpillar® engines The typical package contains the attachments
is the result of fifty years experience in diesel power, normally specified on engines powering mechanical
plus a multi-million dollar research and development rigs. These Cat® engines, when equipped with the
program. For the user this means continual user’s choice of torque converter or clutch, result in
improvement and refinement in engine performance. a unit that specifically meets the application
requirements of the drilling contractor.
The diesel engines and attachments described here
are offered by Caterpillar for use as prime power on
mechanical drilling rigs.

CATERPILLAR® ENGINE SPECIFICATIONS

Cat 3406C
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 in. (137 mm)
Cat 3406C Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.5 in. (165 mm)
Displacement . . . . . . . . . . . . . . . . . . . 893 cu. in. (14.6 L)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . 2990 lb. (1356 kg)
Low idle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 rpm

Cat 3408C
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 in. (137 mm)
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 in. (152 mm)
Cat 3408C
Displacement. . . . . . . . . . . . . . . . . . 1099 cu. in. (18.0 L)
Weight . . . . . . . . . . . . . . . . . . . . . . . . . 3300 lb. (1497 kg)
Low idle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 650 rpm

Cat 3412C
Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.4 in. (137 mm)
Stroke . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 in. (152 mm)
Displacement . . . . . . . . . . . . . . . . . 1649 cu. in. (27.0 L)
Cat 3412C Weight . . . . . . . . . . . . . . . . . . . . . . . . . 4420 lb. (2205 kg)
Low idle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600 rpm

LEHW8160-00 Page 1 of 4
 3406C/3408C/3412C OILFIELD MECHANICAL
RIG POWER

STANDARD EQUIPMENT
Air and Exhaust System Protection System
Air cleaner service indicator Mechanical shutoffs
Single stage dry air cleaner Oil pressure
Exhaust manifold Water temperature
Cooling System Starting and Control System
Jacket water pump Air starting motor
Water connections Manual shutoff control
Thermostat and housing Hydra mechanical governor and air throttle
Fuel System Miscellaneous
Flexible fuel lines Service hour meter
Fuel filter SAE #1 flywheel and housing (3406C)
Priming and transfer pumps SAE #0 flywheel and housing (3408C, 3412C)
Instrumentation SAE standard rotation
Fuel pressure Vibration damper
Lubricating oil pressure Industrial engine supports
Water temperature gauges
Lubrication System
Oil cooler
Filter
Pan
Oil level gauge

ACCESSORY EQUIPMENT
Air and Exhaust System Cooling System
Two-stage air cleaner Corrosion-resistant aftercooler core
Air cleaner adapters Radiators
Precleaner Torque converter oil cooler
Flexible exhaust fitting Tachometer
Muffler
Transmission/torque converter adaptation
Elbow

LEHW8160-00 Page 2 of 4
 3406C/3408C/3412C OILFIELD MECHANICAL
RIG POWER

RATINGS (without fan)

Hoisting Pumping and Drilling
Model bkW bhp rpm Model bkW bhp rpm
3406C – T 242 325 2100 3406C – T 201 270 1800
269 360 2100 205 275 1800
242 325 1800 242 325 1800
242 325 2100 242 325 1800
298 400 2100 257 345 1800
3406C – TA
250 335 2100 268 360 1800
257 345 1800 280 375 1800
269 360 1800 — 321 1800
269 360 2100 287 385 1800
280 375 2000 313 420 1800
3406C – TA
280 375 2100 — 320 1800
298 400 1800 — 250 1800
298 400 2000 3408C – T 242 325 1800
298 400 2100 3408C – TA 347 465 1800
321 430 2100 354 475 1800
3412C – T
328 440 1800 373 500 1800
328 440 1900 533 715 1800
3412C – TA
328 440 2000 418 560 1800
343 460 2100 3412C – TTA 533 715 1800
3408C – T 317 425 2100
261 350 1200
3408C – TA
377 505 2100
429 575 2100
3412C – T
485 650 2100
3412C – TA 559 750 2100
3412C – TTA 559 750 2100

LEHW8160-00 Page 3 of 4
 3406C/3408C/3412C OILFIELD MECHANICAL
RIG POWER

DIMENSIONS

L W

DIMENSIONS
3406C 3408C 3412C
Length — mm (in) 1661 (65) 1590 (63) 2092 (82)
Width — mm (in) 901 (36) 1231 (49) 1302 (51)
Height — mm (in) 1336 (53) 1376 (54) 1447 (57)

CATERPILLAR PARTS AND SERVICE

You will find Caterpillar parts and service outlets in While many oilfield contractors maintain a service
major oil producing areas worldwide. With the most department adept at handling repairs, they have the
comprehensive parts distribution system in the assurance that Caterpillar engine dependability is
industry, most engine parts orders can be filled backed by a force of factory qualified dealer
immediately over a dealer’s counter. As a backup, servicemen worldwide — men who are specially
dealers can quickly convey their parts needs to the trained to keep Cat engines operating at peak
nearest location in a network of Caterpillar parts efficiency. For all engine repairs, from minor work to
facilities around the world. The dealer places an a major overhaul or rebuild, expert attention is as
order with the Caterpillar parts depot and a near as your phone or radio. Work is fast and
computerized inventory control system helps fill that accurate. Downtime is minimized.
order, printing shipping instructions for any part in the Ask about installation and start-up procedures offered
system — wherever it might be. by Caterpillar.

RATING CONDITIONS AND DEFINITIONS

Ratings are based on SAE J1349 standard conditions Hoisting: The power and speed capability of the
of 29.61 in Hg (100 kPa) and 77° F (25° C). These engine which can be used to power the drawworks
ratings also apply at ISO3046/1, DIN6271, and only of a drilling or workover rig through a mechanical
BS5514 standard conditions of 29.61 in Hg (100 kPa), drive.
81° F (27° C) and 60% relative humidity.
Pumping and drilling: The power and speed
Fuel rates are based on fuel oil having an LHV capability of the engine which can be used to power
of 19,590 Btu/lb (45,570 kJ/kg and weighing the mud pumps, rotary table, and drawworks through
7.076 lb/U.S. gal. (848 g/liter). a mechanical drive.

Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow” and the POWER EDGE trade dress, as well as
corporate and product identity used herein, are trademarks of Caterpillar and may not be used without permission.
©2008 Caterpillar
LEHW8160-00 (2-08) All rights reserved.