AURELIA TI
3020 & 4020
Trunk Piston Engine Oil
Approvals
The AURELIA TI range has been developed in
close collaboration with OEMs and meets the
requirements of all major medium speed engine
manufacturers.
Features and Benefits
Description The AURELIA TI range exceeds the CF
AURELIA TI is a range of trunk piston engine specification defined by the American Petroleum
oils developed for use in medium speed diesel Institute. It ensures outstanding cleanliness of both
engines burning residual fuels. AURELIA TI the hot and cold parts of an engine thanks to its
combines an exclusive formulation of the latest detergency and dispersant properties. Its ability to
additive technologies, developed by the Total reduce heavy deposit build-up in an engine creates
research center, and a highly refined base oil to savings via a reduction in maintenance costs. It
provide a substantial safety margin to cope with also offers excellent resistance to the negative
higher stress levels including those of the latest effects of residual fuel contamination, along with
and future designs of diesel engines. excellent thermal resistance and oxidisation
resistance. The stable viscosity of AURELIA TI
Applications range means that fewer top-ups are needed.
The AURELIA TI range can be used in highly
rated, medium speed diesel engines used for both The product is also very water resistant, with
marine and stationary power generation, using outstanding demulsibility capacity, enabling
residual heavy fuel oil with lowsulphur content. It rapid removal of water after an ingress and the
is also suitable for dual fuel 4-stroke engines. Oils maintenance of good engine performance. Good
in the range are particularly suitable for engines wear protection and excellent oil film strength at
consuming a low or very low amount of oil and extreme pressures are also established features
using poor quality residual fuel. They can also be of the product.
used to lubricate bearings and stern tubes, along
with reduction gears.
LUBMARINE 307/2 1610
AURELIA TI
3020 & 4020
Typical Characteristics
Methods Units 3020 4020
S.A.E. Grade 30 40
Density at 15°C ISO 3675 kg/m3 884 910
Kinematic viscosity at 40°C ISO 3104 mm /s2 110 140
Kinematic viscosity at 100°C ISO 3104 mm /s2 12 14
Flash Point (COC) ASTM D 92 °C > = 230 > = 230
Pour Point ISO 3016 °C -12 -12
BN ASTM D 2896 mgKOH/g 20 20
Characteristics of this chart are indicative typical values.
Handling, Health & Safety
AURELIA TI 4020 consist of highly refined mineral oils with specific additives. All lubricants, of any kind, should always
be handled with great care, particularly avoiding any contact with the skin or eyes. Prevent any risk of splashing, and
keep away from combustible materials. Store under cover and away from any risk of contamination.
A safety data sheet complying with current legislation is available at: www.quickfds.com and www.totallubmarine.com
The values shown above are typical values at the date of publication. The color of the lubricant may vary without affecting
its quality or specifications. TOTAL Lubmarine reserves the right to change these typical values without prior notice. LUBMARINE 307/2 1610
