CP-ST

Stainless steel centrifugal pumps

Clean water

CP-ST4 Domestic use

Pump body: stainless steel AISI 304
Impeller: stainless steel AISI 304 Agricultural use
Shaft: stainless steel AISI 431
Industrial use
CP-ST6
Pump body: stainless steel AISI 316L
Impeller: stainless steel AISI 316L
Shaft: stainless steel AISI 316L

PERFORMANCE RANGE INSTALLATION AND USE

• Maximum flow rate 270 l/min (16.2 m³/h) Suitable for use with clean water and with liquids that are not
• Maximum head 45 m chemically aggressive towards the materials from which the pump
is made. Because of its design features these centrifugal pumps
are recommended for use in domestic, agricultural and industrial
applications. All the components in contact with the pumped
APPLICATION LIMITS liquid are in stainless steel AISI 304 or AISI 316L thus guaranteeing
• Manometric suction lift up to 7 m complete hygiene and maximum resistance against corrosion.
• Liquid temperature between -10 °C and +90 °C Installation needs to be undertaken in well ventilated closed areas
• Ambient temperature up to +40 °C or anyway protected from bad weather.
• Max. working pressure:
– 6 bar for CP 100-130-132-150-158 ST4
CP 100-130-132-150-158 ST6
– 8 bar for CP 170-170M ST4 OPTIONS AVAILABLE ON REQUEST
CP 170-170M ST6 • Special mechanical seal
CP 180-190-200 ST4 • Other voltages or 60 Hz frequency
CP 180-190-200 ST6 • IP X5 class protection for CP 170-170M-180-190-200 ST
• Continuous service S1

CONSTRUCTION AND SAFETY STANDARDS

EN 60335-1 EN 60034-1
IEC 60335-1 IEC 60034-1
CEI 61-150 CEI 2-3
EU REGULATION N. 547/2012

CERTIFICATIONS
Company with management system certified DNV
ISO 9001: QUALITY

50
48 Hz  | CP-ST 
PERFORMANCE RANGE 50 Hz  n= 2900 min­­-1  HS= 0 m
0 25 50 US g.p.m.
0 25 50 Imp g.p.m.
50 feet

150
45

CP170-ST
40
125
CP158-ST
35
Head H (metres) 4

100
30

25
CP130-ST 75

20
CP200-ST
CP170M-ST
CP100-ST
CP190-ST 50
15
CP150-ST
CP180-ST
CP132-ST
10
25

MEI≥ 0.40
0 0
0 50 100 150 200 250 l/min
0 5 10 15 m³/h
Flow rate Q 4

MODEL POWER (P2) m³/h 0 0.6 1.2 2.4 3.6 5.4 6.0 7.2 8.4 9.0 9.6 12 13.8 15 16.2
Q
Single-phase Three-phase kW HP  l/min 0 10 20 40 60 90 100 120 140 150 160 200 230 250 270
CPm 100-ST4 CP 100-ST4
0.25 0.33 IE2 16 15.5 15 13.5 11.2 6.5
CPm 100-ST6 CP 100-ST6
CPm 130-ST4 CP 130-ST4
0.37 0.50 22.5 21.5 20.8 18.8 16 10.8 9
CPm 130-ST6 CP 130-ST6
IE3
CPm 132-ST4 CP 132-ST4
0.55 0.75 24 – 23 21.5 19.8 16.5 15 12
CPm 132-ST6 CP 132-ST6
CPm 150-ST4 CP 150-ST4
0.75 1 32 – 31 29.8 28 24.8 23.2 20 16 14
CPm 150-ST6 CP 150-ST6
IE3
CPm 158-ST4 CP 158-ST4
0.75 1 36.5 35.5 34.5 33 31 26.2 24 19
CPm 158-ST6 CP 158-ST6
H metres
CPm 170-ST4 CP 170-ST4
1.1 1.5 41 40 39.2 37.8 36 32 30 25.8 20
CPm 170-ST6 CP 170-ST6
IE3
CPm 170 M-ST4 CP 170 M-ST4
1.1 1.5 36.5 – 35.5 34.3 33 30 29 26.4 23 21 19
CPm 170 M-ST6 CP 170 M-ST6
CPm 180-ST4 CP 180-ST4
1.1 1.5 31.5 – – 30 29.2 27.5 26.8 25.2 23.5 22.5 21.5 17 13
CPm 180-ST6 CP 180-ST6
CPm 190-ST4 CP 190-ST4
1.5 2 IE3 37 – – 35 34 32.2 31.5 30.2 28.7 27.8 27 22.7 18.5 15.5
CPm 190-ST6 CP 190-ST6
CPm 200-ST4 CP 200-ST4
2.2 3 45 – – 43 42 40.2 39.5 38 36.5 35.5 34.5 29.8 25.5 22 18
CPm 200-ST6 CP 200-ST6
Q = Flow rate H = Total manometric head HS = Suction height Tolerance of characteristic curves in compliance with EN ISO 9906 Grade 3B.

  Three-phase motor efficiency class (IEC 60034-30-1)

CP-ST  |  50 Hz
49
CP-ST
CHARACTERISTIC CURVES 50 Hz  n= 2900 min­­-1  HS= 0 m

CP 100-ST  CP130–ST CP 132-ST

25 25
CP132-ST
CP130-ST
33
20 37
40 43
43 20 46

CP100-ST η = 45% 47.5

H (m)

H (m)
η = 48%
15
43 47.5
45
47 40 15
η = 48% 46
10 37
47
45 43

5 10
0 10 20 30 40 50 60 70 80 90 100 110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
0 1 2 3 4 5 6 m3/h 0 1 2 3 4 5 6 7 8m3/h
6 2
CP100-ST
5
NPSH (m)

NPSH (m)
4 CP130-ST
3 1.5
2
1 1
0 10 20 30 40 50 60 70 80 90 100 110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
0.5 0.6
CP130-ST
0.4 0.5
0.3
P2 (kW)

P2 (kW)

CP100-ST
0.4
0.2
0.1 0.3

0 0.2
0 10 20 30 40 50 60 70 80 90 100 110 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
Q (l/min) Q (l/min)

CP 150-ST CP 158-ST
35 40

CP150-ST CP158-ST
30 35
40
45
47 41
49 43
25 30 45
η = 50%
H (m)
H (m)

η = 46%
49
20 47
25
45
45
43
15 40 20 41

10 15
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 0 10 20 30 40 50 60 70 80 90 100 110 120 130
0 1 2 3 4 5 6 7 8 9 m /h
3
0 1 2 3 4 5 6 7 m3/h
5 8
4
NPSH (m)
NPSH (m)

6
3 4
2
1 2
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 0 10 20 30 40 50 60 70 80 90 100 110 120 130
1 1
0.9 0.9
0.8 0.8
P2 (kW)
P2 (kW)

0.7
0.7
0.6
0.5 0.6
0.4 0.5
0.3 0.4
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 0 10 20 30 40 50 60 70 80 90 100 110 120 130
Q (l/min) Q (l/min)

50 Hz  | CP-ST 
CHARACTERISTIC CURVES 50 Hz  n= 2900 min­­-1  HS= 0 m

CP 170-ST CP 170M-ST
45 40

CP170-ST CP170M-ST
40
35
39 40
35 42 43
44
30 45
H (m)

H (m)
30 η = 45% η = 46%

25 45
44
25
42 43

39 20
20 40

15 15
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 20 40 60 80 100 120 140 160 180
0 1 2 3 4 5 6 7 8 m3/h 0 1 2 3 4 5 6 7 8 9 10 m3/h
8 6
NPSH (m)

NPSH (m)
6 4
4
2 2
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 20 40 60 80 100 120 140 160 180
1.3 1.5
1.2
1.1
P2 (kW)

P2 (kW)

1.0
1
0.9
0.8
0.7
0.6 0.5
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 0 20 40 60 80 100 120 140 160 180
Q (l/min) Q (l/min)

CP 180-190-200-ST
45
CP200-ST
40
46
40 50
52
CP190ST η = 53%
35
52
CP180-ST
30 η = 54% 50
H (m)

46
25
η = 54% 40
20

15

10
0 50 100 150 200 250 300
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 m3/h
8 CP200-ST
NPSH (m)

6 CP180-ST
4
2
0
0 50 100 150 200 250 300
2.5 CP200-ST
2
CP190-ST
1.5
P2 (kW)

CP180-ST
1
0.5
0
0 50 100 150 200 250 300
Q (l/min)

CP-ST  |  50 Hz
51
CP-ST4
POS. COMPONENT CONSTRUCTION CHARACTERISTICS
1 PUMP BODY Stainless steel AISI 304
2 BODY BACKPLATE Stainless steel AISI 304
3 IMPELLER Stainless steel AISI 304
4 MOTOR SHAFT Stainless steel AISI 431
5 MECHANICAL SEAL Pump Seal Shaft Materials
Model Model Diameter Stationary ring Rotational ring Elastomer Spring
CP 100-ST4, CP 130-ST4
AR-12 Ø 12 mm Ceramic Graphite NBR AISI 304
CP 132-ST4
CP 150-ST4, CP 158-ST4 AR-14 Ø 14 mm Ceramic Graphite NBR AISI 304
CP 170-ST4, CP 170M-ST4
CP 180-ST4, CP 190-ST4 FN-18 Ø 18 mm Graphite Ceramic NBR AISI 316
CP 200-ST4
6 BEARINGS Pump Model
CP 100-ST4, CP 130-ST4
6201 ZZ / 6201 ZZ
CP 132-ST4
CP 150-ST4, CP 158-ST4 6203 ZZ / 6203 ZZ
CP 170-ST4, CP 170M-ST4
CP 180-ST4, CP 190-ST4 6204 ZZ / 6204 ZZ
CP 200-ST4
7 CAPACITOR Pump Capacitance
Single-phase (230 V or 240 V) (110 V)
CPm 100-ST4 10 μF - 450 VL 25 μF - 250 VL
CPm 130-ST4 10 μF - 450 VL 25 μF - 250 VL
CPm 132-ST4 14 μF - 450 VL 25 μF - 250 VL
CPm 150-ST4, CPm 158-ST4 20 μF - 450 VL 60 μF - 300 VL
CPm 170-ST4, CPm 170M-ST4 25 μF - 450 VL 60 μF - 250 VL
CPm 180-ST4 31.5 μF - 450 VL 60 μF - 250 VL
CPm 190-ST4 45 μF - 450 VL 80 μF - 250 VL
CPm 200-ST4 50 μF - 450 VL –
8 ELECTRIC MOTOR CPm-ST4: single-phase 230 V - 50 Hz with thermal overload protector incorporated into the winding.
CP-ST4: three-phase 230/400 V - 50 Hz.
➠ The three-phase pumps are fitted with high performance motors for
P2=0.25 kW in class IE2 and from P2=0.37 kW in class IE3 (IEC 60034-30-1)
– Insulation: class F  
– Protection: IP X4

2 6 7 6

1 3 5 4 8

50
52 Hz  | CP-ST4 
DIMENSIONS AND WEIGHT

f t
a
DN2

h2
DN1

h3
h

h1
s
w n2

MODEL PORTS DIMENSIONS mm kg

Single-phase Three-phase DN1 DN2 a f h h1 h2 h3 n2 t w s 1~ 3~
CPm 100-ST4 CP 100-ST4 5.7 5.7
CPm 130-ST4 CP 130-ST4 31.5 266 181 92 93.5 185.5 120 181 68.5 9 6.5 6.5
CPm 132-ST4 CP 132-ST4 7.2 7.2
CPm 150-ST4 CP 150-ST4 10.8 10.7
34 296 219 * 107 112 219 165 221 80.5 9.5
CPm 158-ST4 CP 158-ST4 10.8 10.8
1¼" 1"
CPm 170-ST4 CP 170-ST4 14.5 14.6
33.5 368 251 120 117.5 237.5 180 244 86.5 11
CPm 170 M-ST4 CP 170 M-ST4 14.4 14.5
CPm 180-ST4 CP 180-ST4 15.8 15.8
368
CPm 190-ST4 CP 190-ST4 33.5 250 120 117.5 237.5 180 244 86.5 11 16.2 16.9
CPm 200-ST4 CP 200-ST4 390 19.4 19.5
(*) h=233 mm for single-phase versions at 110 V

ABSORPTION
MODEL VOLTAGE MODEL VOLTAGE
Single-phase 230 V 110 V Three-phase 230 V 400 V 690 V 240 V 415 V 720 V
CPm 100-ST4 2.0 A 4.0 A CP 100-ST4 1.7 A 1.0 A 0.6 A 1.7 A 1.0 A 0.6 A
CPm 130-ST4 3.0 A 6.0 A CP 130-ST4 1.9 A 1.1 A 0.6 A 1.9 A 1.1 A 0.6 A
CPm 132-ST4 3.7 A 7.4 A CP 132-ST4 2.3 A 1.3 A 0.8 A 2.1 A 1.2 A 0.7 A
CPm 150-ST4 6.0 A 12.0 A CP 150-ST4 4.2 A 2.4 A 1.4 A 4.0 A 2.3 A 1.3 A
CPm 158-ST4 6.0 A 12.0 A CP 158-ST4 4.2 A 2.4 A 1.4 A 4.0 A 2.3 A 1.3 A
CPm 170-ST4 7.8 A 15.6 A CP 170-ST4 5.7 A 3.3 A 1.9 A 5.5 A 3.2 A 1.8 A
CPm 170 M-ST4 7.8 A 15.6 A CP 170 M-ST4 5.7 A 3.3 A 1.9 A 5.5 A 3.2 A 1.8 A
CPm 180-ST4 8.5 A 17.0 A CP 180-ST4 5.7 A 3.3 A 1.9 A 5.5 A 3.2 A 1.8 A
CPm 190-ST4 10.5 A 21.0 A CP 190-ST4 6.6 A 3.8 A 2.2 A 6.2 A 3.6 A 2.1 A
CPm 200-ST4 12.8 A – CP 200-ST4 8.8 A 5.1 A 2.9 A 8.5 A 4.9 A 2.8 A

PALLETIZATION
MODEL GROUPAGE CONTAINER
Single-phase Three-phase n. pumps n. pumps
CPm 100-ST4 CP 100-ST4
CPm 130-ST4 CP 130-ST4 96 144
CPm 132-ST4 CP 132-ST4
CPm 150-ST4 CP 150-ST4
50 80
CPm 158-ST4 CP 158-ST4
CPm 170-ST4 CP 170-ST4
45 63
CPm 170 M-ST4 CP 170 M-ST4
CPm 180-ST4 CP 180-ST4
CPm 190-ST4 CP 190-ST4 45 63
CPm 200-ST4 CP 200-ST4

CP-ST4  |  50 Hz
53
CP-ST6
POS. COMPONENT CONSTRUCTION CHARACTERISTICS
1 PUMP BODY Stainless steel AISI 316L
2 BODY BACKPLATE Stainless steel AISI 316L
3 IMPELLER Stainless steel AISI 316L
4 MOTOR SHAFT Stainless steel AISI 316L
5 MECHANICAL SEAL Pump Seal Shaft Materials
Model Model Diameter Stationary ring Rotational ring Elastomer Spring
CP 100-ST6, CP 130-ST6
AR-12ST6 Ø 12 mm Ceramic Graphite NBR AISI 316
CP 132-ST6
CP 150-ST6, CP 158-ST6 AR-14ST6 Ø 14 mm Ceramic Graphite NBR AISI 316
CP 170-ST6, CP 170M-ST6
CP 180-ST6, CP 190-ST6 FN-18ST6 Ø 18 mm Graphite Ceramic NBR AISI 316
CP 200-ST6
6 BEARINGS Pump Model
CP 100-ST6, CP 130-ST6
6201 ZZ / 6201 ZZ
CP 132-ST6
CP 150-ST6, CP 158-ST6 6203 ZZ / 6203 ZZ
CP 170-ST6, CP 170M-ST6
CP 180-ST6, CP 190-ST6 6204 ZZ / 6204 ZZ
CP 200-ST6
7 CAPACITOR Pump Capacitance
Single-phase (230 V or 240 V) (110 V)
CPm 100-ST6 10 μF - 450 VL 25 μF - 250 VL
CPm 130-ST6 10 μF - 450 VL 25 μF - 250 VL
CPm 132-ST6 14 μF - 450 VL 25 μF - 250 VL
CPm 150-ST6, CPm 158-ST6 20 μF - 450 VL 60 μF - 300 VL
CPm 170-ST6, CPm 170M-ST6 25 μF - 450 VL 60 μF - 250 VL
CPm 180-ST6 31.5 μF - 450 VL 60 μF - 250 VL
CPm 190-ST6 45 μF - 450 VL 80 μF - 250 VL
CPm 200-ST6 50 μF - 450 VL –
8 ELECTRIC MOTOR CPm-ST6: single-phase 230 V - 50 Hz with thermal overload protector incorporated into the winding.
CP-ST6: three-phase 230/400 V - 50 Hz.
➠ The three-phase pumps are fitted with high performance motors for
P2=0.25 kW in class IE2 and from P2=0.37 kW in class IE3 (IEC 60034-30-1)
– Insulation: class F  
– Protection: IP X4

2 6 7 6

1 3 5 4 8

50
54 Hz  | CP-ST6 
DIMENSIONS AND WEIGHT

f t
a
DN2

h2
DN1

h3
h

h1
s
w n2

MODEL PORTS DIMENSIONS mm kg

Single-phase Three-phase DN1 DN2 a f h h1 h2 h3 n2 t w s 1~ 3~
CPm 100-ST6 CP 100-ST6 5.7 5.7
CPm 130-ST6 CP 130-ST6 31.5 266 181 92 93.5 185.5 120 181 68.5 9 6.6 6.6
CPm 132-ST6 CP 132-ST6 7.2 6.5
CPm 150-ST6 CP 150-ST6 10.8 10.7
34 296 219 * 107 112 219 165 221 80.5 9.5
CPm 158-ST6 CP 158-ST6 10.8 10.8
1¼" 1"
CPm 170-ST6 CP 170-ST6 14.6 14.7
33.5 368 251 120 117.5 237.5 180 244 86.5 11
CPm 170 M-ST6 CP 170 M-ST6 14.5 14.6
CPm 180-ST6 CP 180-ST6 15.8 15.7
368
CPm 190-ST6 CP 190-ST6 33.5 250 120 117.5 237.5 180 244 86.5 11 17.0 17.0
CPm 200-ST6 CP 200-ST6 390 19.6 19.7
(*) h=233 mm for single-phase versions at 110 V

ABSORPTION
MODEL VOLTAGE MODEL VOLTAGE
Single-phase 230 V 110 V Three-phase 230 V 400 V 690 V 240 V 415 V 720 V
CPm 100-ST6 2.0 A 4.0 A CP 100-ST6 1.7 A 1.0 A 0.6 A 1.7 A 1.0 A 0.6 A
CPm 130-ST6 3.0 A 6.0 A CP 130-ST6 1.9 A 1.1 A 0.6 A 1.9 A 1.1 A 0.6 A
CPm 132-ST6 3.7 A 7.4 A CP 132-ST6 2.3 A 1.3 A 0.8 A 2.1 A 1.2 A 0.7 A
CPm 150-ST6 6.0 A 12.0 A CP 150-ST6 4.2 A 2.4 A 1.4 A 4.0 A 2.3 A 1.3 A
CPm 158-ST6 6.0 A 12.0 A CP 158-ST6 4.2 A 2.4 A 1.4 A 4.0 A 2.3 A 1.3 A
CPm 170-ST6 7.8 A 15.6 A CP 170-ST6 5.7 A 3.3 A 1.9 A 5.5 A 3.2 A 1.8 A
CPm 170 M-ST6 7.8 A 15.6 A CP 170 M-ST6 5.7 A 3.3 A 1.9 A 5.5 A 3.2 A 1.8 A
CPm 180-ST6 8.5 A 17.0 A CP 180-ST6 5.7 A 3.3 A 1.9 A 5.5 A 3.2 A 1.8 A
CPm 190-ST6 10.5 A 21.0 A CP 190-ST6 6.6 A 3.8 A 2.2 A 6.2 A 3.6 A 2.1 A
CPm 200-ST6 12.8 A – CP 200-ST6 8.8 A 5.1 A 2.9 A 8.5 A 4.9 A 2.8 A

PALLETIZATION
MODEL GROUPAGE CONTAINER
Single-phase Three-phase n. pumps n. pumps
CPm 100-ST6 CP 100-ST6
CPm 130-ST6 CP 130-ST6 96 114
CPm 132-ST6 CP 132-ST6
CPm 150-ST6 CP 150-ST6
50 80
CPm 158-ST6 CP 158-ST6
CPm 170-ST6 CP 170-ST6
45 63
CPm 170 M-ST6 CP 170 M-ST6
CPm 180-ST6 CP 180-ST6
CPm 190-ST6 CP 190-ST6 45 63
CPm 200-ST6 CP 200-ST6

CP-ST6  |  50 Hz
55