Scribd
Upload
138 views4 pages

NB 50-200-210. 74m3-h. 54m. 18.5KW PDF

This document provides specifications for a single-stage centrifugal end-suction pump. The pump has cast iron and bronze materials, a mechanical shaft seal, and can handle liquids from 0-120 degrees Celsius. It has a rated flow of 77 cubic meters per hour, head of 53 meters, and power of 18.5 kW. Electrical data and installation requirements are also listed. Dimensional drawings and performance curves are included.

Uploaded by

Việt Đặng Xuân
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
138 views4 pages

NB 50-200-210. 74m3-h. 54m. 18.5KW PDF

This document provides specifications for a single-stage centrifugal end-suction pump. The pump has cast iron and bronze materials, a mechanical shaft seal, and can handle liquids from 0-120 degrees Celsius. It has a rated flow of 77 cubic meters per hour, head of 53 meters, and power of 18.5 kW. Electrical data and installation requirements are also listed. Dimensional drawings and performance curves are included.

Uploaded by

Việt Đặng Xuân
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Position Qty.

Description Single Pric


1 NB 50-200/210 ,00 EUR

Note! Product picture may differ from actual product

Product No.: 96125022


Single-stage, centrifugal, end-suction pump.

The pump has the following characteristics:


- flange dimensions according to
EN 1092-2,
- hollow steel coupling,
- Cast iron volute
pump housing and motor stool,
- stainless steel shaft
and Bronze impeller,
- Unbalanced mechanical shaft seal
according to EN 12756.

The motor is a 3-phase AC motor.

Liquid:
Liquid temperature range: 0 .. 120 °C

Technical:
Rated flow: 77 m³/h
Rated head: 53 m
Actual impeller diameter: 210 mm
Type of shaft seal: BAQE
Curve tolerance: ISO 9906 Annex A

Materials:
Material, pump housing: Cast iron
EN-JL1040 DIN W.-Nr.
A48-40B ASTM
Material, impeller: Bronze
EN-JL1030 DIN W.-Nr.
A48-30B ASTM

Installation:
Maximum ambient temperature: 40 °C
Maximum operating pressure: 16 bar
Standard, pipe connection: DIN
Size, pump inlet: DN 65
Size, pump outlet: DN 50
Pressure stage, pipe connec.: PN 16

Electrical data:
Motor type: Teco
Efficiency class: 2
Number of poles: 2
P2 : 18.5 kW
Mains frequency: 50 Hz
Rated voltage: 3 x 380-415 D / 660-690 Y V
Rated current: 32.5 / 18.8 A
Starting current: 653 %
Cos phi - power factor: 0,89

Printed from Grundfos CAPS 1/4


Position Qty. Description Single Pric
Rated speed: 2940 rpm
Full load motor efficiency: 91,6 %
Enclosure class (IEC 34-5): IP55
Insulation class (IEC 85): F

Others:
Net weight: 203 kg

Printed from Grundfos CAPS 2/4


96125022 NB 50-200/210
H NB 50-200/210 eta
(m) Q = 74.3 m³/h (%)
H = 54.2 m

60

50

40 80

70

30 60

50

20 40

30

10 20

10

Eta pump = 71.9 %


0 0
0 10 20 30 40 50 60 70 80 90 100 Q(m³/h)
P2 P2 = 15.3 kW NPSH
(kW) (m)
20 10

16 8

12 6

8 4

4 2

0 NPSH = 2.42 m 0
Printed from Grundfos CAPS 3/4
96125022 NB 50-200/210

343 560 110


100 50

260

200
260
65

160
254
108 254
320
350
350

254

254
130
130

162 108
162

Note! All units are in [mm] unless others are stated.

Printed from Grundfos CAPS 4/4

You might also like