Scribd
Upload
44 views5 pages

Cadcam Coaching Question

This document contains coaching questions for a Computer Aided Design and Manufacturing course. It is divided into 5 units covering topics such as introduction, geometric modelling, CAD standards, CNC and part programming, and cellular manufacturing/flexible manufacturing systems. Each unit contains multiple choice and short answer questions to test students' understanding of key concepts covered in the course.

Uploaded by

Selvaraj G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
44 views5 pages

Cadcam Coaching Question

This document contains coaching questions for a Computer Aided Design and Manufacturing course. It is divided into 5 units covering topics such as introduction, geometric modelling, CAD standards, CNC and part programming, and cellular manufacturing/flexible manufacturing systems. Each unit contains multiple choice and short answer questions to test students' understanding of key concepts covered in the course.

Uploaded by

Selvaraj G
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 5

Reg No:

SELVAM COLLEGE OF TECHNOLOGY, NAMAKKAL


DEPARTMENT OF MECHANICAL ENGINEERING

COACHING QUESTION
Course Code ME 8691 – COMPUTER AIDED DESIGN & Academic year: Year/ Sem /Sec:
& Name MANUFACTURING 2019 - 2020 III / VI / C
UNIT -1 INTRODUCTION
PART – A
1 What is design process? Mention the steps involved in shigleys model for the design process.
2 List the various stages in the life cycle of a product.
3 Classify the two dimensional geometric transformations.
4 List the fundamental reasons for implementing a CAD system.
5 What are the advantages of concurrent engineering?
6 What is meant by concatenation transformation?
7 What is meant by view point and windowing
8 What is the difference between CAD/CAM and CIM?
9 What is homogeneous coordinate?
10 What do you mean by synthesis of design?
PART – B
11 Discuss the stages in the product life cycle and the importance of each step.
12 Define clipping. Also explain the working of a simple line clipping algorithm.
13 Describe and demonstrate DDA line drawing algorithm.
Rotate the rectangle (0,0), (2,0), (2,2), (0,2) shown in figure, 30◦ counter clockwise about its
centroid and the new coordinates of the rectangle.

14

What is mean by concurrent engineering? Describe the various schemes for concurrent
15
engineering.
16 Classify the production system. Compare and contrast the characteristics of each of them.

Course In-charge HoD


Dr. G. SELVARAJ, ASP/MECH.

SELVAM COLLEGE OF TECHNOLOGY, NAMAKKAL


DEPARTMENT OF MECHANICAL ENGINEERING

COACHING QUESTION
Reg No:

Course Code ME 8691 – COMPUTER AIDED DESIGN & Academic year: Year/ Sem /Sec:
& Name MANUFACTURING 2019 - 2020 III / VI / C
UNIT -2 GEOMETRIC MODELLING
PART – A
1 Write the equation of a circle in parametric form. (AU, Dec 17)
2 What are the limitations of Hermite curves? (AU, May 16)
3 Define Quadratic Bezier Curve. (AU, May 17)
4 State the advantages of Bezier Curves. (AU, Dec 16)
5 Differentiate between analytical curve and Sybthetic curve. (AU, Dec 18)
6 Differentiate between analytical curves and approximated curves. (AU, May 19)
Differentiate between analytical curves, interpolated curves and approximated curves. (AU,
7
Dec 15)
8 What is the use of surface patch? (AU, May 18)
9 What are the Significances of CSG? (AU, May 17)
10 What is hybrid solid modeler? (AU, Dec 18)
11 What are the advantages and disadvantages of wireframe modeling? (AU, May 16)
12 Mention various limitations of using wire frame models. (AU, Dec 17)
13 Why b-rep modeling approaches are widely followed than CSG approach? (AU, Dec 16)
PART – B
Summarize the three representation forms (Parametric, Implicit and Explicit) for plane curves,
11 space curves and surfaces. Compare the three representations and write any three inferences. (AU,
May 19)
12 Derive the transformation matrix for a Hermite curve. (AU, Dec 16)
13 What are Bezier curves? Discuss its important properties. (AU, May 16)
14 Briefly discuss about the Bezier surface and composite surface. (AU, May 18)
15 What are B-spline curves? Discuss its important properties. (AU, May 19)
16 Explain the different types pf Geometric modeling with suitable examples. (AU, May 17)
What do you understand by boundary representation (B-rep) technique of solid modeling? Explain
17
briefly the data structure of B-rep solid model. (AU, May 16, Dec 16 & May 19)
Explain constructive solid geometry technique. What is the role of primitive and Boolean
18
operations in CSG? Explain with suitable examples. (AU, Dec 17)

Course In-charge HoD


Dr. G. SELVARAJ, ASP/MECH.

SELVAM COLLEGE OF TECHNOLOGY, NAMAKKAL


DEPARTMENT OF MECHANICAL ENGINEERING

COACHING QUESTION
Course Code ME 8691 – COMPUTER AIDED DESIGN & Academic year: Year/ Sem /Sec:
Reg No:

& Name MANUFACTURING 2019 - 2020 III / VI / C


UNIT -3 CAD STANDARDS
PART – A
1 Mention the need for standardization in computer graphics. (AU, May 16, Dec 18)
Compare the shape based and the product data based exchange standards. (AU, Dec 15 &
2
May 19)
List out the international organizations involved to develop the graphics standards. (AU, May
3
18)
4 What is meant by Cad data exchange? Mention its importance. (AU, Dec 15 & May 19)
5 Write any three CAD standards for exchange of modeling data. (AU, May 16)
6 Define GKS. (AU, May 17)
7 What is the objective of GKS-3D standard? (AU, May 18)
8 What is GKS cell array? (AU, Dec 16)
9 What is IGES? (AU, Dec 17)
10 State the needs for data exchange standards. (AU, Dec 16)
11 What is open graphics Library? (AU, May 17 & Dec 17)
12 What is annotation entity? (AU, Dec 18)
PART – B
11 List and Discuss the major available modules in Cad software packages. (AU, May 18)
12 Explain about various layers of GKS. (AU, Dec 16)
Write short notes on (i) Standards for computer graphics (ii) Open GL. (AU, Dec 15 & Dec
13
18)
Explain the Initial Graphics Exchange specification methodology. (AU, Dec 15, Dec16, May
14
17, May 18, Dec 18 & May 19)
15 Write short note on drawing exchange format (DXF) standard. (AU, May 16 & May 19)
16 Explain the concept of product data exchange using STEP in detail. (AU, May 18)
17 Write notes on communication standards. (AU, Dec 16)

Course In-charge HoD


Dr. G. SELVARAJ, ASP/MECH.

COACHING QUESTION
Course Code ME 8691 – COMPUTER AIDED DESIGN & Academic year: Year/ Sem /Sec:
Reg No:

& Name MANUFACTURING 2019 - 2020 III / VI / C


UNIT -4 FUNDAMENTAL OF CNC AND PART PROGRAMING
PART – A
1
2
3
4
5
6
7
8
9
10
11
12
PART – B
11
12
13
14
15
16
17

Course In-charge HoD


Dr. G. SELVARAJ, ASP/MECH.

COACHING QUESTION
Reg No:

Course Code ME 8691 – COMPUTER AIDED DESIGN & Academic year: Year/ Sem /Sec:
& Name MANUFACTURING 2019 - 2020 III / VI / C
UNIT -5 CELLULAR MANUFACTURING AND FLEXIBLE MANUFACTURING SYSTEM (FMS)
PART – A
1
2
3
4
5
6
7
8
9
10
11
12
PART – B
11
12
13
14
15
16
17

Course In-charge HoD


Dr. G. SELVARAJ, ASP/MECH.

You might also like