Scribd
Upload
62 views2 pages

Blynk Integration for NeoPixel Control

This Arduino code includes libraries for controlling NeoPixel LED strips and connecting to the Blynk IoT platform. It defines 16 NeoPixel LEDs on pin 2 and includes credentials for connecting to a WiFi network and Blynk server. The code uses the Blynk virtual pin V1 to receive x,y coordinate inputs and controls an individual LED by setting its color. It randomly selects LEDs to turn on/off with a delay, cycling through colors every hour.

Uploaded by

BRAYAN RR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
62 views2 pages

Blynk Integration for NeoPixel Control

This Arduino code includes libraries for controlling NeoPixel LED strips and connecting to the Blynk IoT platform. It defines 16 NeoPixel LEDs on pin 2 and includes credentials for connecting to a WiFi network and Blynk server. The code uses the Blynk virtual pin V1 to receive x,y coordinate inputs and controls an individual LED by setting its color. It randomly selects LEDs to turn on/off with a delay, cycling through colors every hour.

Uploaded by

BRAYAN RR
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd

#include <Arduino.

h>
#include <Adafruit_NeoPixel.h>
#define BLYNK_PRINT Serial
#include <ESP8266WiFi.h>
#include <BlynkSimpleEsp8266.h>

#define PIN 2
#define NUMPIXELS 16

Adafruit_NeoPixel pixels = Adafruit_NeoPixel(NUMPIXELS, PIN, NEO_GRB +


NEO_KHZ800);

char auth[] = "92fdc28ab2ef4c6d9f575cf0ea509c4e";

// Your WiFi credentials.


// Set password to "" for open networks.
char ssid[] = "";
char pass[] = "";

int x;
int y;
BLYNK_WRITE(V1) {
int x = param[0].asInt();
int y = param[1].asInt();

// Do something with x and y


[Link]("X = ");
[Link](x);
[Link]("; Y = ");
[Link](y);
}
long randNumber;
void setup()
{

[Link](9600);
[Link](auth, ssid, pass);
[Link]();

[Link](randNumber, [Link](0,0,0));
[Link]();

randomSeed(analogRead(0));
}
void loop()
{
randNumber = random(16);
[Link](randNumber);
[Link](randNumber, [Link](0,0,0));
[Link]();
delay(100);
[Link](randNumber, [Link](0,10,0));
[Link]();
delay(3600000);
if(int i =)

[Link]();
}

You might also like