Decon 30 Product Data Sheet Ca
Decon 30 Product Data Sheet Ca
Benefect® Decon 30 Disinfectant is a safer botanical Suitable for disinfecting hard, nonporous
disinfectant registered with Health Canada for surfaces (metals, glass, fiberglass, plastic, vinyl
control against gram-negative and gram-positive and similar polymers, tiles, painted or sealed
bacteria:Pseudomonas, Salmonella, Staphylococcus, surfaces, finished woodwork, laminated
MRSA, E. coli O157:H7 . mould/mildew/spores: surfaces, marble, and similar stone or stone-like
Trichophyton, Candida abicans. and viruses: Flu A, composites) including: household contents,
and HIV. Other odour causing microorganisms. The remediation equipment & PPE (Personal
use of this product does not contribute to Protective Equipment), floors, vertical surfaces
antimicrobial resistant bacteria. (sanitize in 30 seconds), walls, construction
materials such as water damaged or sewage
Decon 30 is a ready-to-use product that is not contaminated sheet metal, sealed wallboard or
required to be rinsed or wiped after application. wood, shoes & boot soles, coils & drain pans of
Just Spray and Walk Away.TM There are no HVAC & R equipment, food preparation
human health warning or precautionary surfaces, cutting boards, countertops, tables,
statements for use or disposal. Personal sinks, toilet seats, fixtures, cabinets, door knobs
Protective Equipment is not required to apply the & handles, bed frames & rails, computer
product, making Benefect Decon 30 an ideal keyboards & mice, garbage cans, children's
choice for contractors, commercial cleaners, toys, highchairs, changing tables, pet areas,
homeowners, employers, mould remediators and prostheses & orthotics, sports equipment such as
restoration technicians. jock cups & helmets.
Ideal for many applications including residential Decon 30 is certified by the UL ECOLOGO
and commercial cleaning, carpet deodorizing, 2794 Standard for Disinfectants. This
home contents cleaning, food service areas, certification is third party verification that the
water-damaged materials, mould remediation and product has met environmental standards such
anywhere else germs or odour control is required. as: no toxicity to aquatic life, biodegradability,
This product remains effective in the presence of not harmful to human health, no VOCs, not
organic matter. promoting microbial resistance and product
packaging is recyclable.
11/21/17
PHYSICAL PROPERTIES
APPLICATIONS:
General Cleaning & Disinfecting: Decon 30 is ideal for cleaning, disinfecting and
deodorizing in commercial or residential environments. It cleans and sanitizes in 30 seconds
making it a fast and effective product for infection control.
Grey or Black Water (Sewage) Damage: Pre-clean the surface first. Wet the surface
with the spray and leave for 10 minutes. Do not rinse or wipe away.
Mould Remediation: Best used as a wipe application to remove surface moulds and as a
spray after remediation procedure is complete to control any remaining moulds. Should be used
with proper remediation protocols, as all moulds should be removed from affected areas to
ensure health and safety of building occupants.
APPLICATION PROCEDURES
Do not dilute this ready-to-use product.
TO CLEAN: 1. Wet the surface (spot test to check surface compatibility) and wipe clean.
TO DEODORIZE: 1. Wet the surface (spot test to check surface compatibility). 2. Allow to
air-dry. No rinsing or wiping is required.
TO DISINFECT: 1. Wet the surface by sprayer (high or low pressure, hand or power
operated), cloth, sponge or mop (spot test to check surface compatibility). 2. Leave for 10
minutes. Allow to air-dry. No rinsing or wiping is required. For heavily soiled surfaces pre-
cleaning is required
TO SANITIZE: 1. Wet the surface (spot test to check surface compatibility). 2. Leave for
30 seconds. Allow to air-dry. No rinsing or wiping is required.
11/21/17
TO DEODORIZE CARPETS: Apply to the pre-cleaned carpet area by wand, sprayer,
extractor, spin bonnet or immersion processes until saturated (spot test fibers for
colorfastness before use). Scrub or agitate the carpet as needed to ensure the test substance is
delivered throughout the carpet pile and backing. Extract & allow to air dry.
To Fog: For fogging contents and surfaces in contained vacant areas as a supplement to
cleaning and disinfection: after setting up fogging device, seal all windows & doors and
leave area for recommended treatment time, according to device manufacturer. After fogging
cycle is complete, fully ventilate treated area. Following re-entry, cleaning & disinfection
directions may be followed.
11/21/17