Scribd
Upload
237 views

EAM127-24 - Interface Com S6 Scania PDF

The EAM 127-24 is an electronic interface module that converts a 5VDC input signal to a 1.589VDC analog signal for a Scania S6 engine control system. It provides galvanic isolation between a GAC auto-synchronizer and load sharing system and the S6 engine control. The module operates from a 24VDC power supply and its specifications include an input impedance of 200 kOhms, output impedance of 100 kOhms, isolation barrier rating of 1000VDC, and ambient temperature range of -40°C to 85°C.

Uploaded by

thyagoenerg
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
237 views

EAM127-24 - Interface Com S6 Scania PDF

The EAM 127-24 is an electronic interface module that converts a 5VDC input signal to a 1.589VDC analog signal for a Scania S6 engine control system. It provides galvanic isolation between a GAC auto-synchronizer and load sharing system and the S6 engine control. The module operates from a 24VDC power supply and its specifications include an input impedance of 200 kOhms, output impedance of 100 kOhms, isolation barrier rating of 1000VDC, and ambient temperature range of -40°C to 85°C.

Uploaded by

thyagoenerg
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ENGINE GOVERNORS

A
Interface Module
GOVERNING MERICA

C
GAC Governor to Scania S6 Engine
SYSTEM EAM127-24 ORP.

INTRODUCTION WIRING & Mounting


The EAM 127-24 is an electronic interface module designed for use See Wiring Diagram 1 for connections and mounting instructions.
with the Scania S6 engine control system. The module accepts a
nominal 5VDC input signal and converts this signal to a 1.589 VDC
NOTE
analog signal for the S6 control across a galvanic isolated barrier.
The common battery minus connection between the S6 system,
Typical usage is as a signal conditioner between a GAC auto-
EAM127-24, and the GAC auto-sync and load sharing system
synchronizer and load sharing system and the S6 engine control.
should be as direct as possible electrically (minimum voltage
The power to the interface comes from the 24 VDC on the COO.
difference)

SPECIFICATIONS
Transfer Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.33 Volts Out / Volt In

(Terminals 5 & 6)
Input Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 K ohms
Input DC Voltage (Nominal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0 VDC

(Terminals 3 & 4)
Output Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 K ohms
Output DC Voltage (Nominal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.589 VDC
Output Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.4 to 2.75 VDC

(Terminals 1 & 2)
DC Supply Voltage Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 - 32 VDC
Supply Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 mA

(Terminals 2 & 4)
Isolation Barrier Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1000 VDC

Environmental

Ambient Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40˚ to +85˚ C


Vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5G at 20-200 Hz.
Relative Humidly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . up to 100%
Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100% Functionally Tested

This document is subject to change without notice.


Caution: None of GAC products are flight certified controls including this item.
Governors America Corporation 720 Silver Street Agawam, MA 01011
phone: 413.786.5600 fax: 413.789.7736
www.governors-america.com
[email protected]

SCANIA S6 ISOLATED
CIRCUITS GAC MODULES
INTERFACE MODULE LOAD SHARING
OUTPUT
ANALOG INPUT LOAD SHARING
2.875V NOMINAL MODULE *
WIRING DIAGRAM 1.

SIGNAL
GROUND
SYNCHRONIZER *
SYNCHRONIZER
+24V DC OUTPUT
SUPPLY
SIGNAL
GROUND


* SEE SPECIFIC UNIT PUBLICATION
FOR WIRING DETAILS
WIRING

This document is subject to change without notice.


1 2 3 4 5 6
+ - + - - + 2.200
24V DC OUT IN [55.9]

Caution: None of GAC products are flight certified controls including this item.
GAIN
EAM127-24

Ø.200
2.750
[Ø5.1]
[69.8]

PIB4091 A

You might also like