Scribd
Upload
71 views4 pages

Planning of New Scope

The document lists various chemical and mechanical tests performed on construction materials including: 1. Chemical tests done on fly ash, cement, water, steel include measuring pH, soluble salts, composition percentages. 2. Mechanical tests done on aggregates, cement, concrete, bricks include measuring strength properties, absorption, wear resistance. 3. Non-destructive tests performed on structures include rebound hammer, ultrasound, and pile integrity tests.

Uploaded by

Umesh Mishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
71 views4 pages

Planning of New Scope

The document lists various chemical and mechanical tests performed on construction materials including: 1. Chemical tests done on fly ash, cement, water, steel include measuring pH, soluble salts, composition percentages. 2. Mechanical tests done on aggregates, cement, concrete, bricks include measuring strength properties, absorption, wear resistance. 3. Non-destructive tests performed on structures include rebound hammer, ultrasound, and pile integrity tests.

Uploaded by

Umesh Mishra
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Chemical Testing

Sl. Product / Material of Test Specific Test Performed

1 Fly Ash pH Value

Water Soluble Sulphates

Water Soluble Chlorides

Water Soluble Soilds

2 Cement OPC & PPC Silica as SiO2


Lime as CaO
Loss on Ignition-LOI
Insoluble Residue-IR
Iron as FeO3
Almunia as Al2O3
Sulphuric Anhydride as SO3
Magnesia as MgO
Total Chlorides
Water for Construction
3 pH Value
Purposes
Limits of Acidity
Limits of Alkalinity
Inorganic Solids
Organic Solids
Sulphates as SO4
Chloride as Cl
Suspended Matter

4 Plain Steel & Alloy Steel Carbon

Silicon
Manganese
Sulphur
Phosphorous
Mechanical Testing
1 Coarse Aggregate Deleterious Substances
Los Angeles Abrasion Value
Aggregate Crushing Value
Mortar Making Properties
Polished Stone Value-PSV
Wet AIV
Stripping Value Test
2 Fine Aggregate Particle Shape & Size
Bulk Density
Soundness
Mortar Making Properties
Alkali Aggregate Reactivity
Sand Equivalent Value
3 Cement Soundness-Le-Chatilier
Soundness-Autoclave
Fineness by Blaine's Air
Permeability Method
Fineness by Dry Sieving
4 Admixture Dry Material Content
Ash Content
Relative Density
Chloride lon Content
pH Value
5 Concrete Flexural Strength
Water Absorption
Brick-Common Burnt
6 Length of 20 Nos.
(Clay & Lime/Flyash)
Width of 20 Nos.
Height of 20 Nos.
Water Absorption
Efflorescence Test
Warpage Test
7 Paver Block Visual Inspection
Dimensions
Water Absorption
Abrasion Resistance
Flexural Strength
Breaking Load
Thickness of Wearing Layer
8 Soil Relative Density
Coefficient of Interface
Friction
7 NDT Test Rebound Hammer Test
Ultrasonic Pulse Velocity
Pile Integrity Test
hemical Testing
Test Method Specification against Range of Testing / Limits
which test are performed of Detection

Indian Road Congress Publication


1 to 14
SP 58-2001, IS 2720 (Part 26)
Indian Road Congress Publication
SP 58-2001, IS 2720 (Part 27), BS 1377 5mg/kg to 1000 mg/kg
(Part 3)
Indian Road Congress Publication
SP 58-2001, IS 2720 (Part 27), BS 1377 5mg/kg to 1000 mg/kg
(Part 3)
Indian Road Congress Publication
50mg/kg to 5000 mg/kg
SP 58-2001, IS 2720 (Part 21)
IS 4032 15.0 % to 35.0 %
IS 4032 30.0 % to 65.0 %
IS 4032 0.01 % to 10.0 %
IS 4032 0.01 % to 35.0 %
IS 4032 1.0 % to 6.0 %
IS 4032 1.0 % to 10 %
IS 4032 0.5 % to 5.0 %
IS 4032 0.5 % to 10.0 %
IS 4032 0.01% to 0.5 %

4.0 to 12.0

0.1 ml to 10 ml
0.1 ml to 50 ml
100 mg/l to 10000 mg/l
10 mg/l to 500 mg/l
10 mg/l to 3000 mg/l
05 mg/l to 3000 mg/l
0.1 mg/l to 3000 mg/l

ASTM E415

ASTM E415
ASTM E415
ASTM E415
ASTM E415
chanical Testing
IS 2386 (Part 2) 0.1 % to 50 %
IS 2386 (Part 4) 0.5 % to 100 %
IS 2386 (Part 4) 0.5 % to 100 %
IS 2386 (Part 6) 0.1 % to 100 %
BS 812 (Part 111) & ASTM E303/ EN
2SPV to 150SPV
1097
IS 5640
IS 6241 0.1 % to 100 %
IS 2386 (Part 1) 0.075 mm to 10 mm
IS 2386 (Part 3) 0.5 kg/l to 5.0 kg/l
IS 2386 (Part 5) 0.5 % to 10 %
IS 2386 (Part 6) 0.1 % to 100 %
10 milimole/l to 1000
IS 2386 (Part 7)
milimole/l
IS 2720 (Part 37) 01 % to 100 %
IS 4031 (Part 3) 02 Mpa to 120 Mpa
IS 4031 (Part 3) 0.005 mm to 10 mm
IS 4031 (Part 2) 0.005 % to 20 %
IS 4031 (Part 1) 0.5 % to 100 %
IS 9103 0.5 % to 80 %
IS 9103 0.1 to 15.0
IS 9103 0.5 to 1.50
IS 9103 / IS 6925 0.01 % to 0.5 %
IS 9103 4.0 to 12.0
IS 516 0.5 Mpa to 120 Mpa
BS 1881 (Part 22) 0.10 % to 30 %
IS 1077 Clause 6.2.1 3000 mm to 5000 mm
IS 13757 Clause 6.2.1 1500 mm to 2500 mm
IS 12894 Clause 6.2.1 500 mm to 2000 mm
IS 3495 (Part 2) 0.5 % to 60 %
IS 3495 (Part 3) Qualitative
IS 3495 (Part 4) 1.0 mm to 15 mm
IS 15658 Clause 7 Qualitative
IS 15658 Annex B 25 mm to 500 mm
IS 15658 Annex C 0.10 % to 40 %
IS 15658 Annex E 100 mm3 to 15000mm3
IS 15658 Annex G upto 10 Mpa
IS 15658 Annex G upto 2000 kN
IS 15658 Clause 6.2.3 0.01 mm to 20 mm
IS 2720 (Part 14) 0.5 g/cm3 to 3.0 g/cm3

IS 13326 (Part 1)/ASTM D5321 1° to 50°


IS 13311 (Part 2)
IS 13311 (Part 1)
IS 14893

You might also like