Scribd
Upload
57 views6 pages

Bluetooth Datasheet

The EPBM-COM Bluetooth module uses a CSR Bluecore4 chip that supports Bluetooth v2.0. It has an onboard chip antenna and supports baud rates from 4800 to 1382400 that can be changed using AT commands. The compact module measures 26.9mm x 13mm x 2.2mm and can connect to devices like notebooks, Bluetooth dongles, PDAs and more either automatically or by entering a paring code of 1234.

Uploaded by

Lauri Pitkäjärvi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views6 pages

Bluetooth Datasheet

The EPBM-COM Bluetooth module uses a CSR Bluecore4 chip that supports Bluetooth v2.0. It has an onboard chip antenna and supports baud rates from 4800 to 1382400 that can be changed using AT commands. The compact module measures 26.9mm x 13mm x 2.2mm and can connect to devices like notebooks, Bluetooth dongles, PDAs and more either automatically or by entering a paring code of 1234.

Uploaded by

Lauri Pitkäjärvi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

EPBM-COM Bluetooth Module Datasheet

Gemoneky.Technology 06-09-2010

EPBM-COM Serial Blue tooth module employs Bluecore4-External chip from


CSR ,supports Bluetooth v2.0,industrial standard and super light dimension .It
has onboard chip antenna to communicate directly with various Bluetooth dongles
and mobile phone. With new AT command support ,you can even change the baud
rate on the fly!
_CSR chip,Bluetoothv2.0
_Wave band:2.4GHz—2.8GHz,ISM Band
_Protocol: Bluetooth V2.0
_Power Class:(+6dbm)
_Reception sensitivity:-85dBm
_Voltage:3.3(2.7V—4.2V)
_Current:Paring-35mA,Connected-8mA

_Temperature:-40℃~+105℃

_User defined Baud rate:4800,9600,19200,38400,57600,115200,230400,460800,


921600,and1382400. _Dimension:26.9mm*13mm*2.2mm,
_Embedded system, easy wire replacement, Industrial wireless solution.
_Connectable with notebook, Bluetooth dongle, PDA and etc.

_ Coupled Mode: Two modules will establish communication automatically


when powered.(Hint: master blinks slower ,while slave blinks faster)
_ PC hosted m ode: Pair the module with Bluetooth dongle directly as
virtual serial(paring code:1234)

_ Paring: master and slave are remembered after first successful connection.
When
The slave and master are out of range ,they will go to paring mode. To change
paring,pressS1.
Basic Wiring

You may change the baud rate by AT command to satisfy your application. Different baud
rate modules can communicate after paired, but the baud rate should match with its device
connected.
For example:
DeviceA–115200—ModuleA~~~Bluetooth~~~ModuleB—9600—DeviceB.

1.Properly powered.
2.Serial connected with right baud rate.
3.Not paired with other module.
Original serial setting:9600,N,8,1.

Input(to terminal, no entry key):AT Respond(from


terminal):OK

Reprehensive SN for(#)

1-------1200

2-------2400

3------4800

4------9600

5------19200

6-------38400

7------57600

8-----115200

9------230400

A-----460800

B-----921600

C-----1382400

Input:AT+BAUD1

Respond:ok1200

Input:AT+BAUD2
Respond;OK2400……..

Caution: Baud rate beyond 115200 are not supported by most PC system.To revise module with
baud rate over 115200 requires microprocessor programming.

Input: AT+NAMEbill-gates

Respond: OK setname.

Note: All settings are auto saved after AT command setting.

You might also like