NewProducts

B High-Accuracy Digimatic Micrometer

Refer to pages B-3 – B-4 for details.

Coolant Proof Micrometers QuantuMike

Refer to pages B-5 – B-6 for details.

Coolant Proof Micrometers

Refer to pages B-7 – B-8 for details.

Digimatic Micrometer Head

Refer to page B-77 for details.

Locking-screw Type Micrometer Heads

Refer to pages B-88 – B-89 for details.

B-1 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 B
Small Tool Instruments
Micrometers
Micrometer Heads

INDEX

Micrometers
Micrometer
High-Accuracy Digimatic Micrometer B-3
QuantuMike B-5
Coolant Proof Micrometers B-7
Digimatic Outside Micrometers B-9
Quickmike B-10
Absolute Digimatic Micrometers B-11
Outside Micrometers B-13
B
Ratchet Thimble Micrometers B-14
Outside Micrometers B-15
Digit Outside Micrometers B-18
Outside Micrometers B-19 B
Indicator Type Micrometers B-20
Outside Micrometers with Interchangeable Anvils B-21
Outside Micrometers with Anvil Extension Collars B-23
Caliper Type Micrometers B-25
Screw Thread Micrometers B-26
Universal Micrometers B-28
3-Wire Units B-29
Paper Thickness Micrometers B-30
Disk Micrometers B-31
Gear Tooth Micrometers B-33
Disk Micrometers Non-Rotating Spindle Type B-35
Sheet Metal Micrometers B-37
Tube Micrometers B-39
Spline Micrometers B-42
Point Micrometers B-44
V-Anvil Micrometers B-46
Can Seam Micrometers B-50
Blade micrometers B-48
Hub Micrometers / Wire Micrometers B-51
Crimp Height Micrometers B-52
“Uni-Mike” B-53
Limit Micrometers B-54
Indicating Micrometers B-55
Dial Snap Meters B-56
Snap Meters B-57
Groove Micrometers B-58
Quick-Mini B-59
Small Hole Gage Set / Telescoping Gage Set B-60
Setting Standards for Outside Micrometers B-61
Setting Standards for Screw Thread Micrometers B-63
Setting Standards for V-Anvil Micrometers B-63

Micrometer Heads
Optical Parallels / Optical Flats B-64
Spindle Attachment Tips / Micrometer Oil B-65
Color-Coded Ratchets & Speeder B-66
Micrometer Stands B-67
Quick Guide to Precision Measuring Instruments B-68
Micrometer Heads
Micrometer Head Selection Guide B-75
Digimatic Micrometer Heads B-77
Ultra-small / Small Type B-79
Short Body with Choice of Thimble Diameter B-80
Small-Standard Type B-81
Standard Type in Small Size with Zero-adjustable Thimble B-82
Small Standard Type with Carbide-tipped Spindle B-83
Medium-sized Standard Type B-84
Medium-sized Standard Type, 8mm diameter spindle B-86
Locking-screw Type B-88
Non-rotating Spindle Type B-90
Quick Spindle Feed of 1mm/rev B-91
Find Spindle Feed of 0.1mm/rev B-92
Fine spindle Feed of 0.25mm/rev B-94
Differential Screw Translator (Extra-Fine Feed) Type B-95
Large Thimble Type for Fine Feed B-96
XY-Stage Type B-97
Non-rotating Spindle and Large Thimble / Fine Graduation and High Accuracy B-98
Digit Counter type / Micro Jack B-99
Fixtures for Micrometer Heads B-100
Precision Leadscrews B-102
Quick Guide to Precision Measuring Instruments B-103

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-2
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments

High-Accuracy Digimatic Micrometer

SERIES 293
Technical Data
Measuring force: 7 to 9N
• Enabling 0.1μm resolution measurement, this • The ABS (absolute) rotary sensor also Power supply: Lithium battery (CR2032) x 1
Battery life: Approx. two years when used under
micrometer is ideal for customers who need eliminates the need to perform origin setting normal conditions
to make highly accurate measurements with each time the power is turned on, letting
a hand-held tool. you start measuring straight away. With no Functions
• The High-Accuracy Digimatic Micrometer utilizes possibility of overspeed errors, the High- Preset (ABS measurement system):
B Mitutoyo’s innovative 0.1μm resolution ABS Accuracy Digimatic Micrometer also delivers
The measurement origin can be preset to any value within
the display range for convenience in measuring.
(absolute) rotary sensor*1 and high-accuracy a higher level of reliability. Zero-setting (INC measurement system):
The display can be zeroed at any position of the spindle,
screw machining technology to reduce the • The High-Accuracy Digimatic Micrometer making comparison measurement easier. Returning to the
instrumental error to ±0.5μm, delivering has a range of features to enable flexible absolute-measurement mode is easily accomplished.
higher accuracy without sacrificing operability. measurement, including switchable resolution Hold:
The displayed value is held while the spindle is withdrawn
*1. Patent pending in Japan, the United States of (0.0001mm/0.0005mm), function lock and and the micrometer moved so that the display can be
America, the European Union, and China. preset. read at the operator's convenience. After cancelling the
• A highly rigid frame and high-performance hold, the instrument returns to the previous measuring
mode (absolute or incremental).
constant-force mechanism*2 enable more Resolution switching:
stable measurement, while the clicks emitted The resolution of the display can be switched. If 0.1μm
measurement is not required, the resolution can be
while the workpiece is being measured switched to 0.5μm.
assure the operator that measurement is Function lock:
proceeding normally. Functions such as preset or zero-set can be locked to
avoid inadvertently changing the origin position.
*2. Patent pending in Japan, the United States of On/off:
America, the European Union, and China. The power can be turned off after measurement is
complete. Even after the power is turned off, the origin or
• Body heat transferred to the instrument last zero-set position remains in the memory.
is reduced by a (removable) heat shield, Function lock Auto power off:
minimizing the error caused by thermal Even if the power is left on, the power turns off automatically
if the micrometer is not used within a 20-minute period.
expansion of the frame when performing Measurement data output:
handheld measurements. Measurement data can be output, allowing easy
incorporation of this instrument into a statistical process
control or measurement system.
Error alarm:
In the unlikely event of a display overflow or calculation
error, an error message is displayed and measurement
stops. Measurement cannot continue until the error is
corrected.
Also, if the battery voltage drops below a certain point,
the battery indicator will turn on before measurement
becomes impossible, warning the user that the battery
needs to be replaced.
293-100

SPECIFICATIONS
Metric

Order No. Range Resolution Accuracy* Measuring surface Mass

0.0001mm/ 0.0005mm
293-100 0 - 25mm ±0.5μm ø3.2mm 400g
(switchable)
* Excluding quantizing error
Inch/Metric

Order No. Range Resolution Accuracy* Measuring surface Mass

.000005"/.00002"
293-130 0 - 1" 0.0001mm/0.0005mm ±.00002" ø3.2mm 400g
(switchable)
* Excluding quantizing error

B-3 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
Unit: mm

13.5 25 4 50.4 72.7

ø6.35

15.8
ø3.2
2.5 B

24

ø25

58.9
178

Standard accessories

Heat shield (No.04AAB969A: 293-100 Screwdriver (No.04AAB985) x 1

No.04AAB969B: 293-130) x 1 Lens paper (for the monitor)
Lithium battery (CR2032: for the monitor) x 1 Inspection certificate
Spanner (No.200877) x 1

Heat shield

With heat shield*

attached

* Patent pending in Japan, the United States of America,

the European Union, and China.

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-4
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
These marks indicate that a product has successfully passed
IP65-level testing, which is carried out by the independent
German certification organization TÜV Rheinland.

(Refer to page VIII for details.)

The origin of Mitutoyo’s trustworthy brand of small tool instruments

QuantuMike
SERIES 293 — IP65 Coolant Proof Micrometer with 2mm/rev Spindle Feed

• Advanced pioneering technology has created An inspection certificate is attached as standard.

the next generation of micrometer, the • Dust-tight and water
Referjetto page IXIP65
protected for details.
most revolutionary advance in micrometer
technology since James Watt invented the 000 60

6
0021

instrument.
B
• Faster measurement is achieved by using a
coarser thread which feeds the spindle by
2mm per revolution of the thimble. This
increase in thread lead has been made
possible thanks to new high precision thread- 293-140
cutting and testing techniques.

Spindle feed per revolution

1 revolution of thimble
Conventional
model 0.5mm

QuantuMike 2.0mm

• QuantuMike is equipped with a function lock

feature to prevent the origin point being
moved by mistake during measurement.
Function lock

• A graduated scale is provided on the sleeve 293-140 293-142

for use with a reference mark on the thimble
so that every millimeter displacement can be
checked to provide extra confidence.

Reference mark

• The patented ratchet thimble mechanism*

helps ensure repeatable results by transmitting 293-141 293-143
microvibrations along the spindle to the
contact face to provide a constant measuring •The name QuantuMike is from Quantum and
Micrometer, reflecting our belief this tool
force and encourage good contact with the represents a quantum leap in micrometer
workpiece. The ratchet works from the thimble ergonomics.
as well as the speeder so it is always easy to
use – even when making measurements one- • A statistical process control system and
handed. The sound of the ratchet provides a measurement network system can be
the user with a sense of confidence and the established to share information regarding
speeder enables the rapid spindle feed needed quality with a model equipped with the data
when measuring widely different dimensions. output function. (Refer to page A-3, A-4 for
*Patent registered (in Japan, USA, China, Germany, UK and France) details.)
• There is a lineup of convenient Interface
Input Tools which enable the conversion of
measurement data to keyboard signals and
directly input them to cells in off-the-shelf
spreadsheet software such as Excel. (Refer to
page A-5 for details.)
• Excellent resistance against oil, water and dust
(IP65 protection level) enables this product to
be used in machining situations that include
Ratchet on thimble Ratchet on speeder
Ratchet-induced microvibrations along the spindle
splashing coolant fluid.
help ensure repeatable measurements. • Measuring faces: Carbide.

シンブル部 スピーダ部
B-5 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
ラチェット ラチェット Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 SPECIFICATIONS
IP Codes Metric
Level 6: Dust -proof. Order No. Range Resolution Accuracy*1 Flatness Parallelism Mass
No ingress of dust allowed. 293-140 0 - 25mm 265g
Level 5: Protected against water jets. 1µm
with SPC data 293-141 25 - 50mm ±1µm 325g
Water projected in jets against the enclosure
from any direction shall have no harmful effects. output 293-142 50 - 75mm 465g
2µm
293-143 75 - 100mm ±2µm 620g
Technical Data 0.001mm 0.3µm
Dust/Water protection level: IP65 (IEC60529)*2 293-145 0 - 25mm 265g
1µm
Measuring force: 7 to 12N without SPC 293-146 25 - 50mm ±1µm 325g
Battery: SR44 (1 pc) 938882 data output 293-147 50 - 75mm 465g
Length standard: Electromagnetic rotary sensor 2µm
Battery life: Approx. 1.2 years under normal use 293-148 75 - 100mm ±2µm 620g
Standard accessories: Reference bar, 1 pc *1 Excluding quantizing error
(except for 0-25mm (0-1”) models)
Button type silver oxide battery Inch/Metric B
(SR44, No. 938882), 1 pc Order No. Range Resolution Accuracy*1 Flatness Parallelism Mass
Spanner (No. 301336), 1 pc
*2 Rustproofing shall be applied after use. 293-180 0 - 1" 265g
.00004”
with SPC data 293-181 1" - 2" ±.00005” 325g
output 293-182 2" - 3" 465g
Functions .00008”
Origin point setting (ABS length measurement system): 293-183 3" - 4" .00005"/ ±.0001” 620g
.000012”
Pressing the ORIGIN button resets the ABS origin at 293-185 0 - 1" 0.001mm 265g
the current spindle position. Origin values can be set .00004”
without SPC 293-186 1" - 2" ±.00005” 325g
depending on each size. data output
Zero setting (INC length measurement system): 293-187 2" - 3" 465g
.00008”
A brief press on the ZERO/ABS button sets display to 293-188 3" - 4" ±.0001” 620g
zero at the current spindle position and switches to the *1 Excluding quantizing error
incremental (INC) measuring mode. A longer press resets
to the ABS measuring mode.
Hold:
DIMENSIONS
Pressing the HOLD button freezes the current value
in the display. This function is useful for preserving a a L 27 48.5 3 37.5 23.1
Unit: mm
measurement in situations of poor visibility when the 2.8
instrument must be moved away from the workpiece
before the reading can be recorded.
Function lock:
This function allows the ORIGIN (origin point setting)
function and the ZERO (zero setting) function to be locked
ø 6.35

to prevent these points being reset accidentally.

b

ø 19.3
Auto power ON/OFF:
293-141
The reading on the LCD disappears after this instrument
is idle for approx. 20 minutes, but the origin point is
retained. Turning the spindle causes the reading on the Range L a b
LCD to reappear. 0 - 25mm 0 9 25
Data output*3: 25 - 50mm 25 9.8 32
Models equipped with this function have an output port
for transferring measurement data to a Statistical Process 50 - 75mm 50 12.6 47
Control (SPC) system. 75 - 100mm 75 14 60
Error alarm:
In case of an overflow on the LCD or a computing error,
an error message appears on the LCD, and the measuring
function stops. This prevents an instrument from giving
an erroneous reading. Also, when the battery voltage Measuring time on a 6-stepped
drops to a certain level, the low-battery-voltage alarm workpiece with one hand
annunciator appears well before the micrometer becomes
unusable.
*3: Only for the models with SPC data output

Optional accessories
(Only for models with data output function)
Connecting cables with output switch
1m: No. 05CZA662
2m: No. 05CZA663
USB Input Tool Direct
USB-ITN-B (2m): No. 06ADV380B
Connecting cables for U-WAVE-T (160mm) Thanks to the quick movement, positioning times are
No. 02AZD790B reduced by 60%* and measuring times by 35%*
For foot switch: No. 02AZE140B compared with a conventional micrometer.
Refer to page A-21 for details. *According to Mitutoyo’s comparison test data for measuring time on
typical workpieces.

Time needed to measure a multi-stepped

Time [s] cylindrical workpiece (with one hand)
60
53 sec. Positioning time
50 Measuring Time

40

30 41 sec.
22 sec.
20
10 sec.
10
12 sec. 12 sec.
0
Conventional model QuantuMike

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-6
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
These marks indicate that a product has successfully passed
IP65-level testing, which is carried out by the independent
German certification organization TÜV Rheinland.

The origin of Mitutoyo’s trustworthy brand of small tool instruments

Coolant Proof Micrometers

SERIES 293 — with Dust/Water Protection Conforming to IP65 Level
An inspection certificate is attached as standard.
• Based on new water-proof structural • Auto power ON/OFF function. Refer• Dust-tight
page and
to protected
jet
water
IX IP65
for details.

technology, these micrometers provide • Models equipped with a Digimatic output

60
IP65 protection levels, enabling use in port can form part of a statistical process 000

6
0021

environments that include cutting oil, etc*. control or networked measurement system.
IP Codes
* Anti-corrosion treatment is required after use. (Refer to page A-3 for details.)
B • ±1μm instrumental error (75mm/3” or less • Interface Input Tools are available that enable
Level 6: Dust-proof.
No ingress of dust allowed.
measuring range models). the conversion of measurement data to Level 5: Protected against water jets.
Water projected in jets against the enclosure
• Measuring data output function is available keyboard signals that are then directly input from any direction shall have no harmful effects.
with a water-resistant connecting cable to to cells in off-the-shelf spreadsheet software Technical Data
realize IP65. such as Excel. (Refer to page A-5 for details.) ●Flatness: 0.3μm/.000012”
• Oil-resistant materials are used in all plastic • Two types of constant-force devices are ●Dust/water protection level: IP65 (IEC60529) *2
●Measuring force: 5 to 10N
components. available: Ratchet Stop and Ratchet Thimble. ●Battery: SR44 (1pc), 938882
• Further-Increased operability thanks to easy- • Measuring faces: Carbide ●Battery life: Approx. 1.2 years under normal use
to-read LCD with 30% more character area. ●Standard accessories: Reference bar, 1 pc
(except for 0-25mm (0-1”) models)
Button type silver oxide battery
(SR44, 938882), 1 pc
Spanner (301336), 1 pc
*2 Rustproofing shall be applied after use.

Optional accessories
(Only for models with data output function)
Connecting cables with output switch *3
293-230 1m: 05CZA662
2m: 05CZA663
USB Input Tool Direct
USB-ITN-B (2m): 06ADV380B
Connecting cables for U-WAVE-T (160mm)
02AZD790B
For foot switch: 02AZE140B
Refer to page A-21 for details.

293-252-10

*3 These are dedicated connecting cables for Coolant

Proof micrometers.

293-230

293-231

293-233

293-232

B-7 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 SPECIFICATIONS
Metric
Order No Range Resolution Accuracy* Parallelism Constant-force device Mass
293-230 0 - 25mm 270g
1µm
293-231 25 - 50mm ±1µm 330g
293-232 50 - 75mm 470g
2µm
293-233 75 - 100mm 625g
293-250-10 100 - 125mm ±2µm 600g
293-251-10 125 - 150mm 3µm 740g
With ratchet stop
293-252-10 150 - 175mm 800g
293-253-10 175 - 200mm ±3µm 970g
293-254-10 200 - 225mm 0.001mm 1100g
with SPC 4µm
293-255-10 225 - 250mm 1270g
data output
293-256-10 250 - 275mm ±4µm 1340g
Functions 293-257-10 275 - 300mm 5µm 1540g
Origin point setting (ABS measurement system): 293-234 0 - 25mm
1µm
275g B
Resets the ABS origin at the current spindle position to 293-235 25 - 50mm ±1µm 335g
the minimum value of the measuring range and switches With ratchet thimble
293-236 50 - 75mm 475g
to ABS mode. 2µm
293-237 75 - 100mm ±2µm 630g
Zero-setting (INC measurement system): 293-238 0 - 25mm ±1µm 1µm With friction thimble 275g
A brief press on the ZERO/ABS button sets display to 293-962 1 pc of 293-230 & 293-231& 293-232 —
zero at the current spindle position and switches to the
293-963 1 pc of 293-230 & 293-231 & 293-232 & 293-233 —
incremental (INC) measuring mode. A longer press resets
to the ABS measuring mode. 293-240 0 - 25mm 270g
1µm
Hold: 293-241 25 - 50mm ±1µm 330g
With ratchet stop
Pressing the HOLD button freezes the current value 293-242 50 - 75mm 470g
2µm
in the display. This function is useful for preserving a 293-243 75 - 100mm ±2µm 625g
without SPC
measurement in situations of poor visibility where the 293-244 0 - 25mm 0.001mm 275g
data output 1µm
instrument must be moved away from the workpiece 293-245 25 - 50mm ±1µm 335g
before the reading can be recorded. With ratchet thimble
293-246 50 - 75mm 475g
Data output*4 : 2µm
293-247 75 - 100mm ±2µm 630g
Models equipped with this function have an output port 293-248 0 - 25mm ±1µm 1µm With friction thimble 275g
for transferring measurement data to a Statistical Process
* Excluding quantizing error
Control (SPC) system.
• All-Digit preset type: models over 125mm (5”) measuring range
*4: Only models with the data output function
Auto power ON/OFF:
The reading on the LCD disappears after this instrument
is idle for about 20 minutes, but the reading and Inch/Metric
measurement mode are retained. Turning the spindle Order No Range Resolution Accuracy* Parallelism Constant-force device Mass
causes the reading to reappear.
293-330 0 - 1" 270g
Error alarm: .00004"
In case of an overflow on the LCD or a computing error, 293-331 1" - 2" .00005" ±.00005” 330g
an error message appears on the LCD, and the measuring 293-332 2" - 3" /0.001mm 470g
.00008"
function stops. This prevents an instrument from giving 293-333 3" - 4" 625g
an erroneous reading. Also, when the battery voltage 293-350-10 4" - 5" ±.0001” 600g
drops to a certain level, the low-battery-voltage alarm 293-351-10 5" - 6" .00012" 740g
With ratchet stop
annunciator appears well before the micrometer becomes 293-352-10 6" - 7" 800g
unusable. 293-353-10 7" - 8" ±.00015” 970g
Function lock*5 : with SPC .0001"
293-354-10 8" - 9" 1100g
This function allows the ORIGIN (origin point setting) data output /0.001mm .00016"
293-355-10 9" -10" 1270g
function and the ZERO (zero-setting ) function to be 293-356-10 10" - 11" ±.0002” 1340g
locked to prevent these points being reset accidentally. 293-357-10 11" - 12" .0002" 1540g
*5: All-digit preset type only
293-334 0 - 1" With ratchet thimble 275g
293-335 0" - 1" .00005" ±.00005” .00004" 275g
With friction thimble
293-336 1" - 2" /0.001mm 335g
293-960 1 pc of 293-330 & 293-331& 293-332 —
With ratchet stop
293-961 1 pc of 293-330 & 293-331 & 293-232 & 293-333 —
293-340 0 - 1" 270g
.00004"
293-341 1" - 2" ±.00005” 330g
With ratchet stop
293-342 2" - 3" 470g
.00008"
293-343 3" - 4" .00005" ±.0001” 625g
without SPC
293-344 0 - 1" /0.001mm 275g
data output .00004"
293-345 1" - 2" ±.00005” 335g
With ratchet thimble
293-346 2" - 3" 475g
.00008"
293-347 3" - 4" ±.0001” 630g
293-348 0 - 1" ±.00005” .00004" With friction thimble 275g
* Excluding quantizing error
DIMENSIONS • All-Digit preset type: models over 125mm (5”) measuring range

Ratchet stop Ratchet thimble type / Friction thimble type Unit: mm Range L a b c
b L 14.5 2 47.2 2.3 3 43 17 0 - 25mm 0 2.8 9 25
a 27.5
25 - 50mm 25 2.8 9.8 32
ø6.35

5
50 - 75mm 50 2.8 12.6 47
ø18

0
45

75 - 100mm 75 2.8 14 60
100 - 125mm 132.8 5.3 16.7 76
C

125 - 150mm 158.2 5.7 18.8 90

150 - 175mm 183.6 6.1 19.1 102
Measuring range: 100mm or less 175 - 200mm 208.8 6.3 18.2 115
200 - 225mm 234.2 6.7 16.8 127
225 - 250mm 258 5.5 18 139
250 - 275mm 284 6.5 18 152
Ratchet stop type over 100mm
275 - 300mm 309 6.5 18 166

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-8
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer Technical Data
Resolution: 0.001mm or .0001”/0.001mm
Measuring force: 10 to 15N
The origin of Mitutoyo’s trustworthy brand of small tool instruments Battery: SR44 (2 pcs) 938882
Battery life: Approx. 1.8 years under normal use

Digimatic outside micrometers Functions

Origin point setting (ABS measurement system):
SERIES 293 Resets the ABS origin at the current spindle position to
the minimum value of the measuring range and switches
to ABS mode.
Zero-setting (INC measurement system):
• Models equipped with a Digimatic output port • Measuring faces: Carbide A brief press on the ZERO/ABS button sets display to
zero at the current spindle position and switches to the
can form part of a statistical process control or incremental (INC) measuring mode. A longer press resets
to the ABS measuring mode.
networked measurement system. (Refer Hold:
to page A-3 for details.) Pressing the HOLD button freezes the current value
in the display. This function is useful for preserving a
• Constant-force device: ratchet stop measurement in situations of poor visibility where the
B • Interface Input Tools are available that instrument must be moved away from the workpiece
before the reading can be recorded.
enable the conversion of measurement Function lock:
This function allows the PRESET (origin point setting)
293-582
data to keyboard signals that are then function and the ZERO (zero-setting) function to be
locked to prevent these points being reset accidentally.
directly input to cells in off-the-shelf Auto power ON/OFF:
The reading on the LCD disappears after this instrument
spreadsheet software such as Excel. is idle for about 20 minutes, but the reading and
(Refer to page A-5 for details.) measurement mode are retained. Turning the spindle
causes the reading to reappear.
Data output:
SPECIFICATIONS Models equipped with this function have an output port
Metric Inch/Metric for transferring measurement data to a Statistical Process
Control (SPC) system.
Order No. Range Accuracy* Flatness Parallelism Order No. Range Accuracy* Flatness Parallelism Error alarm:
293-582 300 - 325mm 293-782 12"-13" In case of an overflow on the LCD or a computing error,
293-583 325 - 350mm ±6µm 5µm 293-783 13"-14" ±.0003” .0002” an error message appears on the LCD, and the measuring
function stops. This prevents an instrument from giving an
293-584 350 - 375mm 293-784 14"-15" erroneous reading. Also, when the battery voltage drops to
293-585 375 - 400mm 293-785 15"-16" a certain level, the low-battery-voltage alarm annunciator
0.6µm .000024” appears well before the micrometer becomes unusable.
293-586 400 - 425mm ±7µm 293-786 16"-17" ±.00035”
6µm .00024”
293-587 425 - 450mm 293-787 17"-18" Optional accessories
293-588 450 - 475mm 293-788 18"-19" Connecting Cables
±8µm ±.0004”
293-589 475 - 500mm 7µm 293-789 19"-20" .00028” Recommended cables:
* Excluding quantizing error * Excluding quantizing error L-Type (does not interfere with operating the thimble.)
1m: 04AZB512
DIMENSIONS 2m: 05AZB513
Straight type (may interfere with operating the thimble.)
Unit: mm 1m: 959149
L 3 17 Range L a
28 28 2 55.3 50 2m: 959150
18 35 300 - 325 353 187 Refer to page A-21 for detailed information about
325 - 350 378 199 recommended cables.
ф21
ф12

350 - 375 403 212

5 375 - 400 428 224
ф8

400 - 425 453 236

425 - 450 478 248
ａ

450 - 475 503 261

330° 475 - 500 528 273
MDC-325MB - 500MB

SERIES 293 — Digimatic outside micrometers

An inspection certificate is attached as standard.
• Simple design, such as not incorporating data • Equipped with Ratchet Stop for constant Refer to page IX for details.

output, achieves
b low cost. L 28 2measuring
55 3measuring
50 17force.
• Provided only witha an origin-set button for
35 • Measuring faces: Carbide Technical Data
easy origin setting. Measuring force: 5 - 10N
Battery: SR44 (1 pc) 938882
• Further-increased Battery life: Approx. 1.2 years under normal use
φ12

operability thanks Functions

φd

φ21

to easy-to-read LCD5 Zero-setting:

A brief press on the ORIGIN button sets display to zero at
c

with 30%-increased 293-821 the current spindle position (zero-setting), which allows
character area. 330° easy comparison measurement.
Auto power ON/OFF:
The reading on the LCD disappears after this instrument
is idle for about 20 minutes, but the reading is retained.
Turning the spindle causes the reading on the LCD to
SPECIFICATIONS reappear.
Metric With ratchet stop Inch/Metric With ratchet stop Inch/Metric With friction thimble
Order No. Range Resolution Accuracy* Order No. Range Resolution Accuracy* Order No. Range Resolution Accuracy*
293-821 0 - 25mm 0.001mm ±2µm 293-831 0 - 1" .00005"/0.001mm ±.0001" 293-832 0 - 1" .00005"/0.001mm ±.0001"
* Excluding quantizing error * Excluding quantizing error * Excluding quantizing error
DIMENSIONS

Ratchet stop 9 30.7 42.5 2.3 3 43 17 Friction thimble Unit: mm
2.8
143.2
ø6.35
25

ø18
(58.7)

275g

B-9 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 (Refer to page VIII for details.)

(Refer to page VIII for details.)

Quickmike
IP Codes
SERIES 293 — IP54 ABSOLUTE Digimatic Micrometers
Level 5: Protected against dust.
Ingress of dust is not totally prevented, but dust • The Quickmike provides a speedy spindle • Measuring faces: Carbide
that does penetrate must not interfere with
satisfactory operation of the apparatus or impair feed of 10mm per thimble rotation, which • Supplied with a Ratchet Stop for constant
safety. enables widely differently sized features to measuring measuring force.
Level 4: Protected against splashing water.
Water splashed against the enclosure from any be measured quickly. • The lineup includes Non-Rotating Spindle
direction shall have no harmful effects. • Set the origin only once. The absolute linear types (refer to page B-48), Disk Micrometer
scale maintains the origin throughout the types (refer to page B-35 for details) and
B
Technical Data
Resolution: 0.001mm, .00005”/0.001mm
life of battery, meaning no more zero setting Point Spindle and Blade Anvil types (refer to
Accuracy: Refer to the list of specifications. (presetting) or overspeed error. page B-52).
Measuring force: 5 - 10N
Battery: SR44 (1 pc) 938882
Battery life: Approx. 3 years under normal use
(1 year for models over 20mm measuring range)
Maximum response speed: without limit
The non-rotating spindle enables even inexperienced
operators to perform measurements repeatably and 293-668
accurately.

ABSOLUTE scale Quick feeding

with origin point mechanism

Scale Detector Lead screw

10mm

ORIGIN

Optional accessories 293-667 293-666

Connecting cables
1m: 937387
2m: 965013
USB Input Tool Direct
USB-ITN-E (2m): 06ADV380E
Connecting cables for U-WAVE-T
02AZD790E 160mm
For foot switch: 02AZE140E 293-669
Refer to page A-21 for details.

SPECIFICATIONS
Metric
Order No. Range Accuracy* Flatness Parallelism Mass Output function
293-661-10 275g Without
0 - 30mm
293-666 ±2µm 275g
2µm
293-667 25 - 55mm 0.3µm 355g
With
293-668 50 - 80mm 525g
±3µm
293-669 6.2 7534.8
- 105mm 69.6 3.3 42.9 4.2 3µm 625g
* Excluding quantizing
2.8 Range
error
0-30mm
Inch/Metric
ø6.35

Order No. Range Accuracy* Flatness Parallelism Mass Output function

ø24.9

293-676 0 - 1.2" 275g

±.0001”
25

293-677 1" - 2.2" .00008” 355g

.000012” With
293-678 2" - 3.2" 525g
±.00015”
293-679 3" - 4.2" .00012” 625g
* Excluding quantizing error
DIMENSIONS
b L 69.6 3.3 42.9 4.2 Unit: mm
a Range
ø6.35

Range L a b c
ø24.9

0 - 30 34.8 6.2 25
25 - 55 59.8 8.5 36
2.8
c

50 - 80 84.8 10.3 47
75 - 105 109.8 10.7 60

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-10
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments
(Refer to page VIII for details.)

ABSOLUTE Digimatic Micrometers

SERIES 227 — with Adjustable Measuring Force
Technical Data
Flatness: 0.3μm/.000012”
• Digimatic micrometer dedicated to • High-accuracy measurement can be Parallelism: 2μm/.00008”
Measurement posture: horizontal orientation only
applications requiring a constant/low performed even by unskilled operators due to (Recommended spindle inclination: within ±3°)
measuring force such as measuring wire, the repeatability of the automatically applied Battery: SR44 (1pc), 938882
Battery life: Approx. 3 years under normal use
paper, and plastic/rubber parts. measuring force. (1 year for No.227-201, 206, 207, 213, 216, 217)
• Ratchet mechanism in the thimble applies • Non-rotating spindle.
B constant force to workpiece. • Measuring faces: Carbide Functions
• Compact and easy to handle. Adjustable measuring force mechanism
Hold
• Measuring force is adjustable (in steps) to Origin point setting
suit various kinds of workpiece. ABS measurement system
Low voltage alarm
Data output
Presetting (No.227-203, 206, 207, 213, 216, 217)

Optional accessories
Connecting cables
1m: 937387
2m: 965013
USB Input Tool Direct
USB-ITN-E (2m): 06ADV380E
227-201 Connecting cables for U-WAVE-T
02AZD790E 160mm
For foot switch: 02AZE140E
Refer to page A-21 for details.

SPECIFICATIONS
Metric
Order No. Range Measuring force Resolution Accuracy* Measuring force Accuracy of the selected measuring force*1 Repeatability of measuring force*1 Mass
227-201 0 - 15mm 300g
0.5N - 2.5N 0.5, 1.0, 1.5, 2.0, 2.5 N ± (0.1+ the selected measuring force/10) N within 0.1 N
227-203 15 - 30mm 380g
227-205 0 - 10mm 0.001mm ±2µm 340g
227-206 10 - 20mm 2N - 10N 2, 4, 6, 8, 10 N ± (0.4+ the selected measuring force/10) N within 0.4 N 425g
227-207 20 - 30mm 415g
* Excluding quantizing error
Inch/Metric
Order No. Range Measuring force Resolution Accuracy* Measuring force Accuracy of the selected measuring force*1 Repeatability of measuring force*1 Mass
227-211 0 - .6" 300g
0.5N - 2.5N 0.5, 1.0, 1.5, 2.0, 2.5 N ± (0.1+ the selected measuring force/10) N within 0.1 N
227-213 .6"- 1.2" 380g
227-215 0 - .4" .00005"/ 0.001mm ±.0001" 340g
227-216 .4"- .8" 2N - 10N 2, 4, 6, 8, 10 N ± (0.4+ the selected measuring force/10) N within 0.4 N 425g
227-217 .8"- 1.2" 415g
* Excluding quantizing error
* 1: These values are guaranteed used in a horizontal orientation (within ±3 degrees)

Constant-measuring-force mechanism

Measuring force is generated by the action of trapping a workpiece between the spindle face
and the anvil.
The constant-force unit applies the specified measuring force.
When the preset measuring force is reached, the count on the LCD is automatically held and
the hold symbol appears.
(To cancel the hold, reverse the thimble more than 1/10 revolution and press the hold button.)

B-11 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
Adjustable measuring force Unit: mm
9 32 69.6 54 18.1
To preset the measuring force, adjust the measuring force
a L b 4
setting scale on the thimble with the screwdriver supplied.

ø24.5
2.0
1.0

N
0.5
1.5
2.5
ø6.35
25
B

2.0
1.0

N
0.5
1.5
2.5
Range L a b
0 - 15mm 15 2 17
Stroke-limiting bush 0 - 10mm 10 2 22 Measuring force control

8.5 63.8 65.6 54 18.1

a L b

ø24.5
2.0
1.0

N
0.5
1.5
2.5
36

2.0
1.0

N
0.5
1.5
2.5
Range L a b
15 - 30mm 30 12.8 17 Measuring force control
10 - 20mm 20 17.8 22
Stroke-limiting bush
20 - 30mm 30 7.8 22

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-12
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer An inspection certificate is attached as standard.
The origin of Mitutoyo’s trustworthy brand of small tool instruments Refer to page IX for details.

Outside Micrometers
SERIES 102

• Heat-insulated frame. • A ratchet stop or a friction thimble for a

• Cut-away frame (behind anvil) for measuring constant measuring force.
Ratchet stop type
in hard-to-reach places. • Measuring faces: Carbide

Ratchet stop
102-301
Friction thimble type

SPECIFICATIONS
Metric
Order No. Range Graduation Accuracy Flatness Parallelism Constant-force device
102-301 0.01mm ±2µm 0.6µm 2µm
Ratchet stop
102-311 0 - 25mm 0.001mm
±1µm 0.3µm 1µm
102-313 0.001mm friction thimble
102-302 0.01mm ±2µm 0.6µm 2µm
25 - 50mm
102-312 0.001mm ±1µm 0.3µm 1µm
Ratchet stop
102-303 50 - 75mm 0.01mm ±2µm 2µm
0.6µm
102-304 75 - 100mm 0.01mm ±3µm 3µm

Metric Micrometer set

Order No. Range Models included
102-911-01 0 - 100mm • 102-701*
(Four micrometers 102-302
per set) 102-303
102-304
• 3 micrometer standards
* Ratchet thimble micrometer.

DIMENSIONS
b L 14.5 3 47 17 Unit: mm
a 27.5
ø18
ød
c

Range L a b c d
0 - 25mm 30.3 5 26
2.8
25 - 50mm 55.3 8 32
6.35
50 - 75mm 80 9 45
2.5
75 - 100mm 105 10 58

B-13 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 An inspection certificate is attached as standard.
Refer to page IX for details.

Ratchet Thimble Micrometer

SERIES 102 — Outside Micrometers
Technical Data
Flatness: 0.6μm/.000024”
Parallelism: 2μm/.00008” • More accurate in one-handed operation: • Rotating the thimble/
Measuring force: 5-10N
inexperienced operators measure significantly speeder when the workpiece
Internal structure more accurately with the new micrometer. is between the anvil and
Thimble sleeve Speeder sleeve
• Ratchet function works both from the spindle causes the ratchet
thimble and the speeder. mechanism to operate and apply a constant
Ratchet mechanism measuring force to the workpiece.
B
• Clearly audible ratchet operation for
reassurance that measurement is being
performed at constant, preset force.
Ratchet Speeder • The speeder is always available for quick
rotation of spindle.
• A simple mechanism, which requires neither
Greatly improved accuracy and repeatability parts maintenance nor special technique, is
Measurement results of one-handed operation employed in the constant-force device.
A beginner performed a test by measuring a workpiece • Heat-insulated frame.
20 times using a conventional micrometer and a Ratchet • Measuring faces: Carbide
Thimble Micrometer.
Table showing results of test
25 Thimble Micrometer
Conventional micrometer
(non-constant-force device)
Number of measurements

20

15

10 102-701
5

0
-4 -3 -2 -1 0 +1 +2 +3 +4
Measurement error (µm)

102-708

SPECIFICATIONS
Metric Inch
Order No. Range Graduation Accuracy Mass Order No. Range Graduation Accuracy Mass
102-701 0.01mm 101-717 0 - 1" 180g
0 - 25mm 180g .0001” ±.0001”
102-707 0.001mm 102-718 1" - 2" 270g
±2µm
102-702 0.01mm
25 - 50mm 270g
102-708 0.001mm

DIMENSIONS
5 30.3 14.5 3 15 50 Unit: mm
2.8 27.5
ø6.35

ø19

7
26

25-50mm measuring range model

8 55.3
2.8 25 27.5
30

11

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-14
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer An inspection certificate is attached as standard.
The origin of Mitutoyo’s trustworthy brand of small tool instruments Refer to page IX for details.

Outside Micrometers
SERIES 103
Technical Data
Flatness: 0.6μm/.000024”for models up to 300mm/12”
• Baked-enamel-finished frame. 1µm/.00004” for models over 300mm/12”
Parallelism:
• Measuring faces: Carbide (2 + R/100) µm, R = max, range (mm)
• Equipped with Ratchet Stop for constant measuring force. [.00008+.00004 (R/4)]", R = max, range (inch)
*fraction rounded down

103-137

103-139

Metric With ratchet stop Inch With ratchet stop

Order No. Range Graduation Accuracy Order No. Range Graduation Accuracy
103-137 0.01mm 103-177 .001"
0 - 25mm 0 - 1"
103-129 0.001mm 103-131 .0001"
103-138 0.01mm ±2µm 103-178 .001" ±.0001"
25 - 50mm 1" - 2"
103-130 0.001mm 103-132 .0001"
103-139-10 50 - 75mm 103-179 2" - 3"
103-140-10 75 - 100mm 103-180 3" - 4"
103-141-10 100 - 125mm ±3µm 103-181 4" - 5" ±.00015"
103-142-10 125 - 150mm 103-182 5" - 6"
103-143-10 150 - 175mm 103-183 6" - 7"
103-144-10 175 - 200mm ±4µm 103-184 7" - 8" ±.0002"
103-145-10 200 - 225mm 103-185 8" - 9"
103-146-10 225 - 250mm 103-186 9" - 10"
103-147-10 250 - 275mm ±5µm 103-187 10" - 11" ±.00025"
103-148-10 275 - 300mm 103-188 11" - 12"
103-149 300 - 325mm 103-189 12" - 13"
103-150 325 - 350mm ±6µm 103-190 13" - 14" ±.0003"
103-151 350 - 375mm 103-191 14" - 15"
103-152 375 - 400mm 103-192 15" - 16"
103-153 400 - 425mm ±7µm 103-193 16" - 17" ±.00035"
103-154 425 - 450mm 103-194 17" - 18"
103-155 450 - 475mm 103-195 18" - 19"
103-156 475 - 500mm ±8µm 103-196 19" - 20" ±.0004"
103-157 500 - 525mm 103-197 20" - 21"
0.01mm .001"
103-158 525 - 550mm 103-198 21" - 22"
103-159 550 - 575mm ±9µm 103-199 22" - 23" ±.00045"
103-160 575 - 600mm 103-200 23" - 24"
103-161 600 - 625mm 103-201 24" - 25"
103-162 625 - 650mm ±10µm 103-202 25" - 26" ±.0005"
103-163 650 - 675mm 103-203 26" - 27"
103-164 675 - 700mm 103-204 27" - 28"
103-165 700 - 725mm ±11µm 103-205 28" - 29" ±.00055"
103-166 725 - 750mm 103-206 29" - 30"
103-167 750 - 775mm 103-207 30" - 31"
103-168 775 - 800mm ±12µm 103-208 31" - 32" ±.0006"
103-169 800 - 825mm 103-209 32" - 33"
103-170 825 - 850mm 103-210 33" - 34"
103-171 850 - 875mm ±13µm 103-211 34" - 35" ±.00065"
103-172 875 - 900mm 103-212 35" - 36"
103-173 900 - 925mm 103-213 36" - 37"
103-174 925 - 950mm ±14µm 103-214 37" - 38" ±.0007"
103-175 950 - 975mm 103-215 38" - 39"
103-176 975 - 1000mm ±15µm 103-216 39" - 40" ±.00075"
Inch With friction thimble
Order No. Range Graduation Accuracy
103-135 0 - 1"
.001" ±.0001"
103-136 1" - 2"

B-15 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 B
Metric Micrometer set / With ratchet thimble Inch Micrometer set / With ratchet thimble
Order No. Range Models included Order No. Range Models included
0 - 75mm 103-137, 103-138, 103-139-10, 2 micrometer standards 103-929 0 - 3"
103-927-10 (3 pcs./set) (3 pcs./set) 103-177, 103-178, 103-179, 2 micrometer standards
103-930 0 - 4" 103-177, 103-178, 103-179, 103-180,
0 - 150mm 102-701, 103-138, 103-139-10, 103-140-10, 103-141-10, (4 pcs./set) 3 micrometer standards
103-913-31 (6 pcs./set) 103-142-10, 5 micrometer standards
103-904-10 0 - 6" 103-177, 103-178, 103-179, 103-180, 103-181,
150 - 300mm 103-143-10, 103-144-10, 103-145-10, 103-146-10, (6 pcs./set) 103-182, 5 micrometer standards
103-915-10 (6 pcs./set) 103-147-10, 103-148-10, 6 micrometer standards 6" - 12" 103-183, 103-184, 103-185, 103-186, 103-187,
103-906 (6 pcs./set) 103-188, 6 micrometer standards
0 - 300mm All micrometers of 103-913-31 and 103-915-10 in one set,
103-914-31 0 - 12" All micrometers of 103-904-10
(12 pcs./set) 11 micrometer standards 103-905-10 (12 pcs./set) and 103-906 in one set, 11 micrometer standards

DIMENSIONS
Unit: mm
Models up to 75mm measuring range Models 75mm to 300mm
b b L L 14.5 3 14.5
47 3 1747 17 b L 14.5 3 47 17 b
a a 27.5 27.5 a 27.5

ø12
ø18

ø18
ø18

ø6.35
ø6.35

c
c
c

Models over 300mm measuring range

b L 28 3 50 17
a 35
ø21
ø12

Range L a b c
500 - 525mm 40
575 307
525 - 550mm 15
550 - 575mm 40
625 332
ø8

575 - 600mm 15
5
c

600 - 625mm 40
675 355
625 - 650mm 15
650 - 675mm 40
725 382
675 - 700mm 15
700 - 725mm 40
775 405
Range L a b c Range L a b c 725 - 750mm 15
28
0 - 25mm 30 9 28 250 - 275mm 284 152 750 - 775mm 40
6.5 18 825 430
25 - 50mm 55 10 38 275 - 300mm 309 166 775 - 800mm 15
2.5
50 - 75mm 80 12 46 300 - 325mm 353 187 800 - 825mm 40
875 455
75 - 100mm 105 14 57 325 - 350mm 378 199 825 - 850mm 15
100 - 125mm 132.8 5.3 16.7 76 350 - 375mm 403 212 850 - 875mm 40
925 480
125 - 150mm 158.2 5.7 18.8 90 375 - 400mm 428 224 875 - 900mm 15
18 28
150 - 175mm 183.6 6.1 19.1 102 400 - 425mm 453 236 900 - 925mm 40
975 505
175 - 200mm 208.8 6.3 18.2 115 425 - 450mm 478 248 925 - 950mm 15
200 - 225mm 234.2 6.7 16.8 127 450 - 475mm 503 261 950 - 975mm 40
1025 530
225 - 250mm 258 5.5 18 139 475 - 500mm 528 273 975 - 1000mm 15

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-16
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments

Outside Micrometers
SERIES 101 Technical Data
Flatness: .000024”
• Satin-chrome-finished frame, tapered (on Parallelism: .00008" for models up to 3"
.00012" for models over 3"
the anvil side) for hard-to-reach places.
• Supplied with a setting standard (except
for 0-1” models).
• Measuring faces: Carbide
B

101-114

SPECIFICATIONS
Inch With ratchet stop Inch With friction thimble
Order No. Range Graduation Accuracy Order No. Range Graduation Accuracy
101-113 0 - 1" 101-117 0 - 1"
.0001" ±.0001"
101-114 1" - 2" ±.0001" 101-118 1" - 2"
.0001"
101-119 2" - 3"
101-120 3" - 4" ±.00015"

DIMENSIONS
Unit: inch

b L .57 .12 1.85 .67

1.08
ø.71

a
ø.25
c

Range L a b c
0 - 1" 1.18 .10 .20 1.10
1 - 2" 2.16 .08 .31 1.28
2 - 3" 3.19 .11 .33 1.77
3 - 4" 4.19 .11 .33 2.28
Note: The shape of the thimble is different on the
model with a friction thimble.

B-17 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Digit Outside Micrometers
SERIES 193
Technical Data
Counter Reading : 0.01mm or .001"
Flatness: 0.6μm/.000024” • Mechanical digit counter with 0.01mm or • Equipped with Ratchet Stop for constant
Parallelism:
(2 + R/100)μm, R = max. range (mm) .001” resolution for quick and error-free measuring force.
[.00008” + .00004(R/4)]” R = max. range (inch) reading.
fraction rounded down
• Measuring faces: Carbide SPECIFICATIONS
Metric With ratchet stop B
Order No. Range Graduation Accuracy
193-101 0.01mm
0 - 25mm
193-111 0.001mm
193-102 0.01mm
193-101 25 - 50mm ±2µm
193-112 0.001mm
193-103 0.01mm
50 - 75mm
193-113 0.001mm
193-104 0.01mm
75 - 100mm ±3µm
193-114 0.001mm
Inch With ratchet stop
Order No. Range Graduation Accuracy
193-213 2" - 3" .0001" ±.0001"
193-214 3" - 4" .0001" ±.00015"

193-111 Inch With friction thimble

Order No. Range Graduation Accuracy
193-211 0 - 1" .0001"
±.0001"
193-212 1" - 2" .0001"
Metric Micrometer set
Order No. Range Models included
193-901 0 - 75mm • 193-101, 193-102, 193-103
(3 pcs./set) • 2 micrometer standards
193-102,
0 - 100mm • 193-101,
193-902 (4 pcs./set) • 3193-103, 193-104
micrometer standards
193-112
Inch Micrometer set
Order No. Range Models included
193-923 0 - 3" • 193-211, 193-212, 193-213
(3 pcs./set) • 2 micrometer standards

DIMENSIONS
Unit: mm
Models up to 100mm measuring range

b L 25.5 3 47 17
a 27.5
ø18
ø6.35
c

Range L a b c
0 - 25mm 30 2.5 5 26
25 - 50mm 55 8 32
50 - 75mm 80 2.0 45
9
75 - 100mm 105 57

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-18
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments

Outside Micrometers
SERIES 406 — Non-Rotating Spindle Type Technical Data
Battery :SR44 (1 pc), 938882
• Non-rotating spindle.
Optional accessories
• Equipped with Ratchet Stop for constant measuring force. Connecting cables
1m: 05CZA662
2m: 05CZA663
USB Input Tool Direct
B USB-ITN-B (2m): 06ADV380B
SPC cables for U-WAVE w/ data switch (160mm):
02AZD790B
For foot switch: 02AZE140B
406-250 (Refer to page A-21 for details.)

Metric
Order No. Range Resolution Accuracy* Flatness Parallelism
406-250 0 - 25mm
406-251 25 - 50mm ±3µm 3µm
0.001mm 0.3µm
406-252 50 - 75mm
406-253 75 - 100mm ±4µm 4µm
* Excluding quantizing error
Inch/Metric
Order No. Range Resolution Accuracy* Flatness Parallelism
406-350 0 - 1"
406-351 1" - 2" .00005"/ ±.00015” .00012”
.000012"
406-352 2" - 3" 0.001mm
406-353 3" - 4" ±.0002” .00016”
* Excluding quantizing error

DIMENSIONS
Digital models up to 75mm measuring range Unit: mm
b L 42.5 2.3 3 41 11.5 17
a 41.5 14.2

5
0

45
ø6.35

ø14

ø18
c

Digital models over 75mm measuring range

b L 14.5 6.5 47.2 2.3 3 41 11.5 17
a 27.5
ø6.35

5
ø18

45
c

Range L a b c
0 - 25mm 58.5 2.8 7 32
25 - 50mm 83.5 2.8 9.8 47
50 - 75mm 108.5 2.8 11.2 60
75 - 100mm 105.3 2.8 14.1 57

B-19 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Indicator Type Micrometers
SERIES 107
Technical Data
Flatness: 0.6μm/.000024”
Parallelism: • Designed to mount a dial indicator for direct • Various kinds of indicators*1 are selectable
(2 + R/100)μm, R = max. measuring range (mm)
fraction rounded down GO/±NG judgment on mass-produced parts. depending on the measurement type
• Anvil retracting trigger for quick (accuracy required, measuring range, etc.).
measurement. • Measuring faces: Carbide
• Anvil stroke: 3mm
B

Typical indicator choice 107-201

Dial indicator (0.01mm) / 2046SB (Indicator shown is optional)
Dial indicator (0.001mm) / 2109SB-10
ABS Digimatic Indicator (0.01mm) / 543-400B
ABS Digimatic Indicator (0.001mm) / 543-390B
*1 Indicators with stems cannot be installed on this micrometer.
SPECIFICATIONS
Metric
Order No. Range Graduation Accuracy
107-201 0 - 25mm
107-202 25 - 50mm ±2µm
107-203 50 - 75mm
107-204 75 - 100mm
0.01mm
107-205 100 - 125mm ±3µm
107-206 125 - 150mm
107-207 150 - 175mm
±4µm
107-208 175 - 200mm

DIMENSIONS AND MASS

Unit: mm
Measuring range up to 50mm Measuring range up to 200mm
Indicator stem size

Indicator stem size

28.5 L 14.5 50.5 18 L 14.5 50.5

ø8 +0.015

ø8+0.015

Measuring range 27.5 3 Measuring range 27.5 3

0

0
ø18

ø18
ø6.35

ø6.35
C

Dial or Digimatic Indicator (optional) Dial or Digimatic Indicator (optional)

Anvil retracting trigger Anvil retracting trigger

Measuring range up to 75mm

Indicator stem size

18 L 14.5 50.5 Range L C

Measuring range 27.5 3
ø8 +0.015

0 - 25mm 39.5 30
0

ø6.35

5
25 - 50mm 64.5 38
ø18

0
45 50 - 75mm 90 48
75 - 100mm 115.6 65
C

100 - 125mm 140.6 79

Dial or Digimatic Indicator (optional) 125 - 150mm 165.6 93
Anvil retracting trigger 150 - 175mm 190.5 105
175 - 200mm 215.5 120

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-20
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 These marks indicate that a product has successfully passed
IP65-level testing, which is carried out by the independent

Micrometer German certification organization TÜV Rheinland.

The origin of Mitutoyo’s trustworthy brand of small tool instruments

Outside Micrometers
SERIES 340, 104 — with Interchangeable Anvils
• Dust-tight + water
IP Codes (series 340) jet protected IP65

• Wide measuring range with interchangeable • IP 65 water/dust protection (series 340). Level 6: Dust -proof.
anvils. * Models with a measuring range up to 300mm. No ingress of dust
4 0 1allowed.
40

0
1207
• Measuring face of the spindle is carbide • Equipped with Ratchet Stop for constant Level 5: Protected against water jets.
Water projected in jets against the enclosure
tipped (standard model). measuring force. from any direction shall have no harmful effects.

B Technical Data
Flatness:
0.6μm/ .000024” for models up to 300mm/ 12”
1.0μm/ .00004” for models over 300mm/ 12”
Parallelism:
2μm/ .00008” for models up to 75mm/ 3”
3μm/ .00012” for models up to 150mm/ 6”
(2+R/100)μm for models over 150mm,
R=max. range (mm)
Fraction rounded up
±[.00008” + .00004 (R/4)]” For models over 6”
R= max. range (inch)
Fraction rounded up
Accuracy:
±(4+R/75)µm, R = max. range (mm)
104-136 ±[.00016”+.00004(R/3)]” R = max. range (inch)
(excluding quantizing error for digital models)
Fraction rounded up
Excluding quantizing error

340-251-10

SPECIFICATIONS
Metric Inch/Metric

Interchangeable Setting Standard Micrometer Interchangeable Setting Standard Micrometer

Order No. Range Resolution Order No. Range Resolution
anvils Qty Size head stroke anvils Qty Size head stroke

Digimatic (LCD) Digimatic (LCD)

340-251-10 0 - 150mm 5 25-125mm .00005"/
6pcs. 340-351-10 0 - 6" 5 1"- 5"
340-252-10 150 - 300mm 6 150-275mm 0.001mm
340-520 300 - 400mm 300-375mm 340-352-10 6" - 12" 6"- 11"
340-521 400 - 500mm 400-475mm 340-720 12" - 18" 6pcs. 12"- 17" 1"
.0001"/
340-522 500 - 600mm 0.001mm 500-575mm 25mm 340-721 18" - 24" 6 18"- 23"
0.001mm
340-523 600 - 700mm 4pcs. 4 600-675mm 340-722 24" - 30" 24"- 29"
340-524 700 - 800mm 700-775mm 340-723 30" - 36" 30"- 35"
340-525 800 - 900mm 800-875mm
340-526 900 - 1000mm 900-975mm

Metric Inch
Interchangeable Setting Standard Micrometer Interchangeable Setting Standard Micrometer
Order No. Range Graduation Order No. Range Graduation
anvils Qty Size head stroke anvils Qty Size head stroke

Analog Analog
104-171* 0 - 50mm 1pcs. 1 25mm 104-165 0 - 2" 1pcs. 1 1"
104-139A 0 - 100mm 4pcs. 3 25-75mm 104-149 0 - 4" 4pcs. 3 1" - 3"
104-135A 0 - 150mm 6pcs. 5 25-125mm 104-137 0 - 6" 6pcs. 5 1" - 5"
104-161A 50 - 150mm 50-125mm 104-162 2" - 6" 2" - 5"
4pcs. 4 4pcs. 4
104-140A 100 - 200mm 100-175mm 104-150 4" - 8" 4" - 7"
104-136A 150 - 300mm 6pcs. 6 150-275mm 104-138 6" - 12" 6pcs. 6 6" - 11"
104-141A 200 - 300mm 200-275mm 104-151 8" - 12" 8" - 11"
0.01mm 25mm 4pcs. 4
104-142A 300 - 400mm 300-375mm 104-152 12" - 16" 12" - 15"
104-143A 400 - 500mm 400-475mm 104-201 12" - 18" 6pcs. 6 12" - 17"
104-144A 500 - 600mm 500-575mm 104-153 16" - 20" 4pcs. .001" 4 16" - 19" 1"
4pcs. 4 104-202 18" - 24" 6pcs. 6 18" - 23"
104-145A 600 - 700mm 600-675mm
104-146A 700 - 800mm 700-775mm 104-154 20" - 24" 20" - 23"
4pcs. 4
104-147A 800 - 900mm 800-875mm 104-155 24" - 28" 24" - 27"
104-148A 900 - 1000mm 900-975mm 104-203 24" - 30" 6pcs. 6 24" - 29"
* The frame is fitted with a heat shield. 104-156 28" - 32" 4pcs. 4 28" - 31"
104-204 30" - 36" 6pcs. 6 30" - 35"
104-157 32" - 36" 32" - 35"
4pcs. 4
104-158 36" - 40" 36" - 39"
104-205 36" - 42" 6pcs. 6 36" - 41"

B-21 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
104-135A Unit: mm

18.5 18 164.5 14.5 47 17

2 A L 27.5 3

ø18
9

ø6.3
ø8
5
0
45

ø6.35
ø18
B

93
Battery for series 340
SR44 (1 pc), 938882

Optional accessories
Connecting cables for
340-251-10 & 340-352-10, 340-351-10&340-352-10
1m: 05CZA662
2m: 05CZA663 Interchangeable anvil
USB Input Tool Direct L : Range (mm)
USB-ITN-B (2m): 06ADV380B
Range 0 to 150mm models 0 - 25 25 - 50 50 - 75 75 - 100 100 - 125 125 - 150
SPC cables for U-WAVE w/ data switch (160mm):
02AZD790B Range 150 to 300mm models 150 - 175 175 - 200 200 - 225 225 - 250 250 - 275 275 - 300
For foot switch: 02AZE140B Order No. 303950 303951 303952 303953 303954 303955
Connecting cables for A: Overall length (mm) 135 110 85 60 35 10
340-520/1/2/3/4/5/6, 340-720/1/2/3 models Interchangeable anvil M1 M2 M3 M4 M5 M6
Recommended cables:
L-Type (does not interfere with operating the thimble.) L : Range (mm)
1m: 04AZB512 Range 300 to 400mm models 300 - 325 325 - 350 350 - 375 375 - 400
2m: 05AZB513
Straight type (may interfere with operating the thimble.) Range 400 to 500mm models 400 - 425 425 - 450 450 - 475 475 - 500
1m: 959149 Range 500 to 600mm models 500 - 525 525 - 550 550 - 575 575 - 600
2m: 959150 Range 600 to 700mm models 600 - 625 625 - 650 650 - 675 675 - 700
Range 700 to 800mm models 700 - 725 725 - 750 750 - 775 775 - 800
Range 800 to 900mm models 800 - 825 825 - 850 850 - 875 875 - 900
Range 900 to 1000mm models 900 - 925 925 - 950 950 - 975 975 - 1000
Order No. 304001 304002 304003 304004
L-type
A: Overall length (mm) 87 62 37 12
Interchangeable anvil M3 M4 M5 M6

Over 400mm up to 1000mm

Straight Type

18 28 B 28 2 55.3 3 50 17
A L 35
3 9
ø21
ø8
8

330°

L : Range (mm) B C
Range 300 to 400mm models 300 - 325 325 - 350 350 - 375 375 - 400 425 224
Range 400 to 500mm models 400 - 425 425 - 450 450 - 475 475 - 500 525 273
Range 500 to 600mm models 500 - 525 525 - 550 550 - 575 575 - 600 625 332
Range 600 to 700mm models 600 - 625 625 - 650 650 - 675 675 - 700 725 382
Range 700 to 800mm models 700 - 725 725 - 750 750 - 775 775 - 800 825 430
Range 800 to 900mm models 800 - 825 825 - 850 850 - 875 875 - 900 925 480
Range 900 to 1000mm models 900 - 925 925 - 950 950 - 975 975 - 1000 1025 530
Order No. 304001 304002 304003 304004
A: Overall (mm) 87 62 37 12
Interchangeable anvil M3 M4 M5 M6

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-22
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments

Outside micrometers
SERIES 105 — with Anvil Extension Collars
Technical Data
Flatness: 1.3μm
• Wide measuring range with anvil extension • Measuring faces: Carbide Parallelism:
(2 + R/100)μm, R = max. range (mm)
collars • Equipped with Ratchet Stop for constant fraction rounded down
• 50mm/2” spindle stroke measuring force. Accuracy:
±(6+R/75)μm, R = max. range (mm)
fraction rounded up
B Anvil Extension Collar

Extension collar
Measuring range 700 to 750mm
with 105-105

Measuring range 750 to 800mm

with 105-105

105-105

SPECIFICATIONS
Metric
Order No. Range Graduation Extension Collars Setting Standard
105-103 500 - 600mm
105-104 600 - 700mm
1 pc
105-105 700 - 800mm 0.01mm 2 pcs.
(50mm)
105-106 800 - 900mm
105-107 900 - 1000mm

B-23 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Outside micrometers
SERIES 105 — with Anvil Extension Collars
Technical Data
Flatness: 1.3μm/.000052”
Parallelism: • Wide measuring range with anvil extension collars
(2 + R/100)μm, R = max. Range (mm) • 50mm/2” spindle stroke
[.00008” + .00004(R/4)]”, R = max. Range (inch)
fraction rounded down • Measuring faces: Carbide
Accuracy: • Equipped with Ratchet Stop for constant measuring force.
±(6+R/75)μm, R = max. Range (mm)
±[.0003” + .00005”(R/3)]”, R = max. range (inch)
fraction rounded up B

105-408

SPECIFICATIONS
Metric Inch
Order No. Range Graduation Extension Collars Setting Standard (pcs) Order No. Range Graduation Extension Collars Setting Standard (pcs)
(every 100mm)
105-408 1000 - 1100mm 105-428 40" - 44"
105-409 1100 - 1200mm 105-429 44" - 48"
105-410 1200 - 1300mm 105-430 48" - 52"
105-411 1300 - 1400mm 105-431 52" - 56"
105-412 1400 - 1500mm 1 pc 105-432 56" - 60" 1 pc
0.01mm 2 .001” 2
105-413 1500 - 1600mm (50mm) 105-433 60" - 64" (2")
105-414 1600 - 1700mm 105-434 64" - 68"
105-415 1700 - 1800mm 105-435 68" - 72"
105-416 1800 - 1900mm 105-436 72" - 76"
105-417 1900 - 2000mm 105-437 76" - 80"
(every 200mm)
105-418 1000 - 1200mm
105-419 1200 - 1400mm
2 pcs
105-420 1400 - 1600mm 0.01mm 4
(50mm, 100mm)
105-421 1600 - 1800mm
105-422 1800 - 2000mm

DIMENSIONS
Over 1200mm up to 2000mm Unit: mm
25.5 28 L 28 3 83 17
8 100 50 7 60 Range L a
1000 - 1200mm 1225 500 - 600
ø8
ø8

5
ø 21

45

1200 - 1400mm 1425 600 - 700

Anvil extension collar (100mm) Anvil extension collar (50mm)
1400 - 1600mm 1625 700 - 800
1600 - 1800mm 1825 800 - 900
a

1800 - 2000mm 2025 900 - 1000

a: distance to workpiece stop

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-24
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments

Caliper Type Micrometers

SERIES 343, 143
Technical Data
Flatness: 0.3µm/.000012”
• Effective for measuring workpiece features • Measuring faces: Carbide Parallelism: (3+R/75)µm, R = max. range (mm)
[.00012”+.00004(R/3)]” R = max. range (inch)
where access is difficult. • Equipped with Ratchet Stop for constant fraction rounded down
measuring force.

343-250

143-101

SPECIFICATIONS
Metric Inch/Metric Battery for series 343
Order No. Range Resolution Accuracy* Order No. Range Resolution Accuracy* SR44 (1 pc), 938882
Digimatic (LCD) Digimatic (LCD)
343-250 0 - 25mm ±5µm 343-350 0 - 1" ±.00025"
Optional accessories for series 343
Connecting cables
343-251 25 - 50mm ±6µm 343-351 1" - 2" ±.0003"
0.001mm .00005"/ 0.001mm 1m: 05CZA662
343-252 50 - 75mm ±7µm 343-352 2" - 3" ±.00035" 2m: 05CZA663
343-253 75 - 100mm ±8µm 343-353 3" - 4" ±.0004" USB Input Tool Direct
* Excluding quantizing error * Excluding quantizing error USB-ITN-B (2m): 06ADV380B
Connecting cables for U-WAVE-T
Metric Inch 02AZD790B 160mm
Order No. Range Graduation Accuracy Order No. Range Graduation Accuracy For foot switch: 02AZE140B
Analog Analog Refer to page A-21 for details.
143-101 0 - 25mm ±5µm 143-121 0 - 1" ±.00025"
143-102 25 - 50mm ±6µm 143-122 1" - 2" .001" ±.0003" Series 343 functionality
143-103 50 - 75mm ±7µm 143-123 2" - 3" ±.00035" Origin point setting (ABS measurement system):
143-104 75 - 100mm ±8µm Resets the ABS origin at the current spindle position to
143-105 100 - 125mm the minimum value of the measuring range and switches
±9µm to ABS mode.
143-106 125 - 150mm
0.01mm Zero-setting (INC measurement system):
143-107 150 - 175mm
±10µm A brief press on the ZERO/ABS button sets display to
143-108 175 - 200mm
zero at the current spindle position and switches to the
143-109 200 - 225mm incremental (INC) measuring mode. A longer press resets
±11µm
143-110 225 - 250mm to the ABS measuring mode.
143-111 250 - 275mm Hold:
±12µm
143-112 275 - 300mm Pressing the HOLD button freezes the current value
in the display. This function is useful for preserving a
measurement in situations of poor visibility where the
DIMENSIONS instrument must be moved away from the workpiece
before the reading can be recorded.
Measuring range up to 100mm Unit: mm Range L a b C Data output:
L b 11.3 47.2 2.3 3 41 11.5 17
Digimatic (LCD) Models equipped with this function have an output port
c 14 a for transferring measurement data to a Statistical Process
7.4 0 - 25mm 55.5 Control (SPC) system.
Thickness of jaw 3
3.4
25 - 50mm 80.5 Auto power ON/OFF:
27.5 10.6 32.9
50 - 75mm 105.5 The reading on the LCD disappears after this instrument
ø6.35
ø4
25.7

5.9
75 - 100mm 130.5 is idle for about 20 minutes, but the reading and
12.5

measurement mode are retained. Turning the spindle

ø13

ø18

Analog
causes the reading on the LCD to reappear.
0 - 25mm 59.8 Error alarm:
25 - 50mm 84.8 In case of an overflow on the LCD or a computing error,
50 - 75mm 109.8 an error message appears on the LCD, and the measuring
75 - 100mm 134.8 function stops. This prevents an instrument from giving an
Measuring range up to 300mm 31.8 10.6 28.6 erroneous reading. Also, when the battery voltage drops to
100 - 125mm 159.8
L b 3 47 17 a certain level, the low-battery-voltage alarm annunciator
C 14 a
125 - 150mm 184.8 appears well before the micrometer becomes unusable.
7.4
3.4 Thickness of jaw 3
150 - 175mm 209.8
175 - 200mm 234.8
ø4

200 - 225mm 255.8

25.7

5.9
225 - 250mm 280.8
12.5

27.8 14.5 32.5

ø13

ø18

250 - 275mm 305.8

ø8

275 - 300mm 330.8

B-25 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Screw Thread Micrometers
SERIES 125
Technical data
Accuracy: ±(2+R/75)μm, R = max. range (mm)
fraction rounded up • Fixed anvil type to suit 60º threads • Equipped with Ratchet Stop for constant
Spindle feed error: 3μm
• Directly indicates screw pitch diameter measuring force.
(no need for calculation)

125-103

SPECIFICATIONS
Metric Metric
Order No. Thread to be measured
Order No. Thread to be measured Range Graduation
Range Graduation (Metric/Unified)
(Metric/Unified)
125-101 0.4 - 0.5mm/64 - 48TPI 125-111 0.6 - 0.9mm/44 - 28TPI
125-102 0.6 - 0.9mm/44 - 28TPI 125-112 1 - 1.75mm/24 - 14TPI
125-103 1 - 1.75mm/24 - 14TPI 0 - 25mm 125-113 2 - 3mm/13 - 9TPI 50 - 75mm
125-104 2 - 3mm/13 - 9TPI 125-114 3.5 - 5mm/8 - 5TPI
125-105 3.5 - 5mm/8 - 5TPI 125-115 5.5 - 7mm/4.5 - 3.5TPI
0.01mm 0.01mm
125-106 0.4 - 0.5mm/64 - 48TPI 125-116 0.6 - 0.9mm/44 - 28TPI
125-107 0.6 - 0.9mm/44 - 28TPI 125-117 1 - 1.75mm/24 - 14TPI
125-108 1 - 1.75mm/24 - 14TPI 25 - 50mm 125-118 2 - 3mm/13 - 9TPI 75 - 100mm
125-109 2 - 3mm/13 - 9TPI 125-119 3.5 - 5mm/8 - 5TPI
125-110 3.5 - 5mm/8 - 5TPI 125-120 5.5 - 7mm/4.5 - 3.5TPI
* A setting standard is supplied with each model (except for 0-25mm measuring range).
The setting standard is for metric threads (unified) 60°.

DIMENSIONS
Unit: mm
No.125-101,125-106 No.125-111,125-116

18 L 14.5 3 47 17 L 14.5 3 47 17
4.9 32.3 4.7 32.3
ø18
ø6.35

ø6.35

5
ø18

0
45
c

Range L C Range L C
0 - 25mm 37.2 25 50 - 75mm 87 49
25 - 50mm 62.2 32 75 - 100mm 112 63

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-26
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 These marks indicate that a product has successfully passed

Micrometer
IP65-level testing, which is carried out by the independent
German certification organization TÜV Rheinland.

The origin of Mitutoyo’s trustworthy brand of small tool instruments

Screw Thread Micrometers

SERIES 326, 126 — Interchangeable Anvil / Spindle Tip Type
IP Codes (326 series)
Level 6: Dust-proof.• Dust-tight + water
jet protected IP65

• Anvils and spindle tips are interchangeable • Equipped with Ratchet Stop for constant No ingress of dust allowed.
Level 5: Protected against water jets.
in matching pairs to enable measurement of measuring force. Water projected 4in0 1 jets
1 2 0 7 against the enclosure
40

0
Metric/Unified or Whitworth threads. • Interchangeable anvils / spindle tips are from any direction shall have no harmful effects.
• Direct reading of screw pitch diameter optional. Technical Data
(no need for calculation) Spindle feed error: 3μm/ .00015”
B

326-251-10

Battery for series 326

SR44 (1 pc), 938882
Optional accessories
Connecting cables
1m: 05CZA662
2m: 05CZA663
USB Input Tool Direct
126-125 USB-ITN-B (2m): 06ADV380B
Connecting cables for U-WAVE-T
02AZD790B 160mm
For foot switch: 02AZE140B
Interchangeable anvils / Refer to page A-21 for details.
spindle tips (optional) Optional accessories
Sets of interchangeable anvils / spindle tips
SPECIFICATIONS
Metric Inch/Metric • For Metric/Unified threads (pair)
Order No. Range Resolution Accuracy* Order No. Range Resolution Accuracy* Order No. Matching anvils/spindle tips included
Digimatic (LCD) Digimatic (LCD) 126-800 0.4 - 0.5mm/64 - 48TPI (126-801)
326-251-10 0 - 25mm 326-351-10 0 - 1" 0.6 - 0.9mm/44 - 28TPI (126-802)
326-252-10 25 - 50mm ±4µm 326-352-10 1" - 2" .00005"/ ±.0002" 1 - 1.75mm/24 - 14TPI (126-803)
0.001mm 2 - 3mm/13 - 9TPI (126-804)
326-253-10 50 - 75mm 326-353-10 2" - 3" 0.001mm 3.5 - 5mm/8 - 5TPI (126-805)
326-254-10 75 - 100mm ±5µm 326-354-10 3" - 4" ±.00025" 5.5 - 7mm/4.5 - 3.5TPI (126-806)
* Excluding quantizing error * Excluding quantizing error
• For Whitworth threads (pair)
Metric Inch
Order No. Range Graduation Accuracy Order No. Range Graduation Accuracy Order No. Matching anvils/spindle tips included
Analog Analog 126-810 60 - 48TPI (126-811)
126-125 0 - 25mm 126-137 0 - 1" 48 - 40TPI (126-812)
126-126 25 - 50mm ±4µm 126-138 1" - 2" ±.0002" 40 - 32TPI (126-813)
32 - 24TPI (126-814)
126-127 50 - 75mm 126-139 2" - 3" 24 - 18TPI (126-815)
126-128 75 - 100mm 126-140 3" - 4" .001" 18 - 14TPI (126-816)
126-129 100 - 125mm ±5µm 126-141 4" - 5" ±.00025" 14 - 10TPI (126-817)
126-130 125 - 150mm 126-142 5" - 6" 10 - 7TPI (126-818)
0.01mm 7- 4.5TPI (126-819)
126-131 150 - 175mm 126-143 6" - 7" ±.0003"
126-132 175 - 200mm ±6µm 4.5 - 3.5TPI (126-820)
126-133 200 - 225mm
126-134 225 - 250mm Technical description
126-135 250 - 275mm ±7µm • Anvils / spindle tips
126-136 275 - 300mm θ Allowable error
θ of the angle of anvils
Notes: 1) A matching setting standard is supplied with each model (except for 0-25mm measuring range). (Refer to page B-63 for details.) and spindle tips
The setting standard is for metric threads (unified) 60°. Metric Whitworth Half angle
2) For functional details of 326 series, refer to 293 series. Type (Unified) (Unified) error
Please note that origin setting of these models is free-digit preset type. Also, connecting cables (optional) have to be a waterproof type. W1 ±30'
M1 (U1) W2 ±30'
DIMENSIONS W3 ±20'
Pitch (mm), M2 (U2) W4 ±20'
θ Nominal
Unit: mm Range L C designation
W5 ±15'
M3 (U3) W6 ±15'
0 - 25mm 39.5 25 of threads M4 (U4) W7 ±10'
18 L 14.5 3 47 17 25 - 50mm 64.5 32 per inch W8 ±10'
27.5
50 - 75mm 90 45 M5 (U5) W9 ±10'
ø6.35

75 - 100mm 115.6 65 M6 (U6) W10 ±10'

ø18

100 - 125mm 140.6 79 Note) This chart indicates the difference

between the angle made by anvil’s
125 - 150mm 165.6 93 contact faces and spindle’s axes and
the half angle with error α.
ø3.5 holes for mounting the
interchangeable anvils and tips 150 - 175mm 190.5 105 Metric/Unified θ = 60°
Whitworth θ = 55°
Throat depth C

175 - 200mm 215.5 120

200 - 225mm 240.5 130
225 - 250mm 265.5 147
250 - 275mm 290.5 165
275 - 300mm 315.5 171

B-27 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Universal Micrometer
SERIES 116 — Interchangeable Anvil Type

• Non-rotating spindle type which accepts • Equipped with Ratchet Stop for constant
seven forms of optional interchangeable anvil measuring force.
/ spindle tip (flat, spline, spherical, point, • Optional anvils / spindle tips for screw thread
knife-edge, disk, and blade) for a wide range measurement (matching V and cone) are also
of applications. available.
B

Technical data
Spindle feed error: 3μm/.00015"

Optional accessories
• Interchangeable anvils / spindle tips are available in matching pairs. 116-101
3.5
ø2
ø6

ø6

Flat 116-801 Spline 116-802

ø0.3
55°
ø6

ø4

SR4
Spherical 116-803 Point 116-804 0.4
0.1

ø11.1
45°

ø3.5

Knife-edge 116-805 Disk 116-806

2
0.75

Blade 116-807

Order No. Description

116-800 Anvils / spindle tips set (7 pairs) Interchangeable contact points (optional)

SPECIFICATIONS
Optional accessories Metric Inch
• Thread-measuring interchangeable contact points are
Order No. Range Graduation Accuracy Order No. Range Graduation Accuracy
available in matching pairs.
Set Identifier 116-101 0 - 25mm 116-105 0 - 1"
Order No. 0.01mm ±4µm .001" ±.0002"
Range of measurement (mm) 116-102 25 - 50mm 116-106 1" - 2"
116-831 0.4 - 0.5mm/64 - 48TPI * 116-102 is provided with a plain setting standard (167-101)
116-832 0.6 - 0.9mm/44 - 28TPI and a 60°-thread setting standard (167-261) for adjusting
116-833 1 - 1.75mm/24 - 14TPI the minimum range point according to the application.
116-834 2 - 3mm/13 - 9TPI
116-835 3.5 - 5mm/8 - 5TPI
116-836 5.5 - 7mm/4.5 - 3.5TPI
116-830 116-831 - 116-836 M (U) Set

■アクセサリー（オプション）

コードNo. 品名 標準価格
116-800 替駒測定子セット（116-801∼807のセット） 54,000円
■アクセサリー（オプション）
●ねじ替駒測定子（一対）
ピッチ区分
コードNo. 符号 標準価格
（mm）
116-831 M1（U1） 0.4∼0.5（64∼48山） 8,760円
116-832 M2（U2） 0.6∼0.9（44∼28山） 8,760円
116-833 M3（U3） 1∼1.75（24∼14山） 8,760円
116-834 M4（U4） 2∼3（13∼9山） 8,760円
116-835 M5（U5） 3.5∼5（8∼5山） 8,760円
116-836 M6（U6） 5.5∼7（4.5∼3.5山） 8,760円
116-830 116-831∼116-836 M（U）セット 52,500円

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-28
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments

3-Wire Units
SERIES 313
Technical Data
Roundness of wire: 0.5μm or less
• Enables measurement of the pitch diameter • Determination of the pitch diameter: refer Cylindricity of wire: 1μm or less
Hardness of wire: 63 to 66 HRC
of screw threads with a standard micrometer. to “Quick Guide to Precision Measuring Accuracy of wire diameter: ±2μm
Instruments”.

313-101

SPECIFICATIONS
3-Wire Units set
Order No. Set Wire dia. (mm) Support spindle dia. (mm)
313-101 18 0.170 - 3.200 ø6.35

Order No. Pitch

(One pair) Wire dia.
(Support spindle dia.) (mm) Metric thread Unified thread Whitworth thread
ø6.35mm (.25"DIA.) (mm) (thread per inch) (thread per inch)
952131 0.170 0.2, 0.25, 0.3 80 —
952132 0.195 0.35 72 —
952133 0.220 0.4 64 —
952134 0.250 0.45 56 60
952135 0.290 0.5 48 48
952136 0.335 0.6 44, 40 40
952137 0.390 0.7 36 36
952138 0.455 0.75, 0.8 32 32
952139 0.530 0.9 28 28, 26
952140 0.620 1.0 24 24, 22
952141 0.725 1.25 20 20, 19, 18
952142 0.895 1.5 18, 16 16
952143 1.100 1.75, 2.0 14, 13, 12 14, 12
952144 1.350 2.5 11, 10 11, 10
952145 1.650 3.0 9, 8 9, 8
952146 2.050 3.5 7 7
952147 2.550 4, 4.5 6 6
952148 3.200 5, 5.5, 6 5, 4.5 5, 4.5

B-29 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Paper Thickness Micrometers
SERIES 169 — Non-Rotating Spindle Type

• For paper thickness measurement.

• Non-rotating spindle.
• Equipped with Ratchet Stop for constant measuring force.
(8.02±0.8N)
B
Anvil dimensions
Unit: mm
0.4

169-101
Without
(ø.44”)
ø14.3

recess

( ): Inch model

SPECIFICATIONS
Metric
Order No. Range Graduation Accuracy Flatness Parallelism
169-101 0 - 25mm 0.01mm ±4µm 1µm 3µm

Inch
Order No. Range Graduation Accuracy Flatness Parallelism
169-103 0 - 1" .001" ±.0002" .00004" .00012"

DIMENSIONS
Unit: mm

13.5 37.5 14.5 3 47 15.5 17

6.2 31.3
Without recess
(ø.44")
ø14.3

ø8

5
ø18

0
45

0.4 0.4
25

( ): inch model

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-30
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 These marks indicate that a product has successfully passed

Micrometer
IP65-level testing, which is carried out by the independent
German certification organization TÜV Rheinland.

The origin of Mitutoyo’s trustworthy brand of small tool instruments

Disk Micrometers
SERIES 323, 223, 123
IP Codes (323 series)
Level 6: Dust-proof.
• Dust-tight + water

• Measures “root tangent length” of spur • Equipped with Ratchet Stop for constant
jet protected IP65
No ingress of dust allowed.
Level 5: Protected against water jets.
gears and helical gears. measuring force. Water projected4 0in jets 0against the enclosure

0
112074
• Determination of the root tangent length: • Supplied with a setting standard (except for from any direction shall have no harmful effects.
refer to “Quick Guide to Precision Measuring 0-25mm/0-1” measuring range).
Technical Data
Instruments”.
B Flatness: 1µm/.00004” for models up to 100mm/4”
1.6µm/.000063” for models over 100mm/4”
Parallelism: 4µm/.00016” for models up to 50mm/2”
6µm/.00024” for models up to 100mm
123-103 (5+R/75)µm for models over 100mm,
R = max. range (mm)
fraction rounded up
.00024” for models up to 4”

Root tangent length of gear (En)

123-101

Base tangent length

323-250

SPECIFICATIONS
Metric Inch/Metric
Order No. Range Resolution Accuracy* Anvil dia. Measurable module Order No. Range Resolution Accuracy* Anvil dia. Measurable module
Digimatic (LCD) Digimatic (LCD) Battery for series 323
323-250 0 - 25mm 323-350 0 - 1" SR44 (1 pc), 938882
±4µm ±.0002"
323-251 25 - 50mm 323-351 1" - 2" .00005"/
0.001mm ø20mm 0.5 - 6 .787" 0.5 - 6 Optional accessories for series 323
323-252 50 - 75mm 323-352 2" - 3" 0.001mm
±6µm ±.0003" Connecting cables
323-253 75 - 100mm 323-353 3" - 4" 1m: 05CZA662
* Excluding quantizing error * Excluding quantizing error 2m: 05CZA663
USB Input Tool Direct
Metric Inch USB-ITN-B (2m): 06ADV380B
Order No. Range Graduation Accuracy Anvil dia. Measurable module Order No. Range Graduation Accuracy Anvil dia. Measurable module Connecting cables for U-WAVE-T
Mechanical counter model Mechanical counter model 02AZD790B 160mm
223-101 0 - 25mm ±4µm 223-125 0 - 1" .001" ±.0002" .787" 0.5 - 6 For foot switch: 02AZE140B
0.01mm ø20mm 0.5 - 6 Refer to page A-21 for details.
223-102 25 - 50mm ±4µm Analog
Analog 123-125 0 - 1"
±.0002"
123-101 123-126 1" - 2"
0 - 25mm ±4µm .001" .787" 0.5 - 6
123-113* 123-127 2" - 3"
±.0003"
123-102 123-128 3" - 4"
25 - 50mm ±4µm
123-114*
ø20mm 0.5 - 6
123-103
50 - 75mm ±6µm
123-115*
123-104
75 - 100mm ±6µm
123-116*
0.01mm
123-105 100 - 125mm
±7µm
123-106 125 - 150mm
123-107 150 - 175mm
123-108 175 - 200mm ±8µm
ø30mm 0.7 - 11
123-109 200 - 225mm
123-110 225 - 250mm
123-111 250 - 275mm ±9µm
123-112 275 - 300mm
* The measuring disks have carbide tips.

B-31 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
Digital models up to 75mm measuring range
Unit: mm

b L 42.5 2.3 3 43 17
a 35.2

5
0
B
45

ø6.35

ø18
C

Digital models up to 100mm measuring range

b L 14.5 2 47.2 2.3 3 43 17

a 32

5
0
45
ø6.35

ø18
C

Analog models up to 50mm measuring range

b L 14.5 3 47 17
t ød
a 31.5

øe
ø6.35

Center recess
c

ø18

Range L a b c d e t
Digimatic (LCD)
0 - 25mm 39.7 4.5 9.2 25
25 - 50mm 65.6 5.4 11 31
20 8 0.7
Analog over 50mm measuring range 50 - 75mm 90.7 5.5 12.2 50
75 - 100mm 112.5 5.5 13.5 60
b L 14.5 3 47 17 Analog
a 31.5 0 - 25mm 37.5 25
6 14
25 - 50mm 62.5 32 8 0.7
20
5 50 - 75mm 87 49 (9.8) (0.7)
5.5 11
0
45
75 - 100mm 112 63
100 - 125mm 137.5 12 79
ø6.35

ø18

125 - 150mm 162.5 15 94

c

150 - 175mm 187.5 16 106

175 - 200mm 212.5 15 118
6 30 12 1
200 - 225mm 237.5 130
14
225 - 250mm 262.5 143
250 - 275mm 287.5 156
15
275 - 300mm 312.5 169
* Data in ( ) applies to those with carbide-faced disks.

GMA-75∼300

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-32
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 These marks indicate that a product has successfully passed

Micrometer
IP65-level testing, which is carried out by the independent
German certification organization TÜV Rheinland.

The origin of Mitutoyo’s trustworthy brand of small tool instruments

Gear Tooth Micrometers

SERIES 324, 124 — Interchangeable Ball Anvil / Spindle Tip Type IP Codes (324 series)
Level 6: Dust-proof.
• Dust-tight + water
jet protected IP65

• Measures over-pin diameter of gears using • Interchangeable ball anvils / spindle tips for No ingress of dust allowed.
Level 5: Protected against water jets.
precision steel (or carbide) ball anvils / spindle various gear modules (0.5-5.25) are optional. Water projected4 0in1 1 jets
2 0 7 against the enclosure
40

0
tips. • Equipped with Ratchet Stop for constant from any direction shall have no harmful effects.
• Series 324: IP65 Digimatic gear tooth measuring force.
micrometers. • Ball anvil / spindle tips: optional.
B • Determination of the over-pin diameter:
refer to “Quick Guide to Precision Measuring
Instruments”.
Optional accessories
• Interchangeable ball anvil / spindle tip set
Diameter*
Order No. Gear module Dia. pitch
(mm)
324-251-10 124-801 ø0.8 0.5 - 0.55 50
124-802 ø1.0 0.6 - 0.65 45
124-803 ø1.191 (3/64") 0.7 - 0.8 35 - 30
124-821 ø1.5 0.9 - 1 28 - 26
124-804 ø1.588 (1/16") 0.9 - 1 28 - 26
124-805 ø2.0 1.25 22
124-806 ø2.381 (3/32") 1.5 17
124-822 ø2.5 1.5 17
124-807 ø3.0 1.75 15
124-808 ø3.175 (1/8") — 14
124-823 ø3.5 2 13
124-173 124-809 ø3.969 (5/32") 2 13
124-810 ø4.0 2.25 11
124-824 ø4.5 2.5 10
124-811 ø4.763 (3/16") 2.5 10
124-812 ø5.0 2.75 9
124-813 ø5.556 (7/32") 3.0 - 3.25 8
124-814 ø6.0 3.5 7
SPECIFICATIONS 124-815 ø6.35 (1/4") 3.75 7
Metric Inch/Metric 124-816 ø7.0 4.0 6.5
Order No. Range Resolution Accuracy* Order No. Range Resolution Accuracy* 124-817 ø7.144 (9/32") 4.25 6
Digimatic (LCD) Digimatic (LCD) 124-818 ø7.938 (5/16") 4.5 5.5
324-251-10 0 - 25mm 324-351-10 0 - 1" 124-819 ø8.0 4.75 5.5
324-252-10 25 - 50mm ±4µm 324-352-10 1" - 2" .00005"/ ±.0002" 124-820 ø8.731 (11/32") 0.5 - 5.25 5
324-253-10 50 - 75mm 0.001mm 324-353-10 2" - 3" 0.001mm * ø2mm or less/ carbide-tipped type
324-254-10 75 - 100mm ±5µm 324-354-10 3" - 4" ±.00025"
* Excluding quantizing error * Excluding quantizing error Battery for 324 series
Metric SR44 (1 pc), 938882
Order No. Range Graduation Accuracy Optional accessories
Analog
124-173 0 - 25mm Connecting cables for 324 series
1m: 05CZA662
124-174 25 - 50mm ±4µm
2m: 05CZA663
124-175 50 - 75mm
USB Input Tool Direct
124-176 75 - 100mm
USB-ITN-B (2m): 06ADV380B
124-177 100 - 125mm ±5µm
SPC cables for U-WAVE w/ data switch (160mm):
124-178 125 - 150mm 02AZD790B
0.01mm
124-179 150 - 175mm For foot switch: 02AZE140B
124-180 175 - 200mm ±6µm (Refer to page A-21 for details.)
124-181 200 - 225mm
124-182 225 - 250mm
124-183 250 - 275mm ±7µm
124-195 275 - 300mm

B-33 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS

Digital models up to 50mm Unit: mm
18 L 14.5 2 47.2 2.3 3 43 17
68.5 27.5

ø18
B

ø6.35
ø8
a

ø3.5 Range L a
(For attaching interchangeable tip)
0 - 25mm 64.5 32
25 - 50mm 90 45

Digital models over 50mm up to 100mm

18 L 14.5 2 47.2 2.3 3 43 17
68.5 27.5

ø18
ø6.35
ø8

ø3.5
a

(For attaching interchangeable tip)

Range L a
50 - 75mm 115.6 65.5
75 - 100mm 140.6 79

Analog models up to 50mm

18 L 14.5 3 47 17
27.5
ø6.35

ø18
a

ø3.5 Range L a
(For attaching interchangeable tip) 0 - 25mm 64.5 32
25 - 50mm 90 45

Analog models over 50mm up to 300mm

18 L 14.5 3 47 17
(28) 68.5 (83.5) 27.5 (28) (50)
(35)
ø8

(ø21)
ø18
ø6.35

（ ）内はGMB-300
(ø8)

( ): Order No.124-195
Range L a
ø3.5 50 - 75mm 115.6 65
a

(For attaching interchangeable tip) 75 - 100mm 140.6 79

100 - 125mm 165.6 93
125 - 150mm 190.5 105
150 - 175mm 215.5 120
175 - 200mm 240.5 130
200 - 225mm 265.5 147
225 - 250mm 290.5 165
250 - 275mm 315.5 171
275 - 300mm 353 187

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-34
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 Micrometer
The origin of Mitutoyo’s trustworthy brand of small tool instruments

Disk Micrometers
SERIES 369, 227, 169 — Non-Rotating Spindle Type Anvil
Unit: mm
ø20 (ø14.3)
• Measures “root tangent length” of spur • Equipped with Ratchet Stop for constant 0.7
(0.4)
gears and helical gears. measuring force.
• Determination of the root tangent length: • Supplied with a setting standard (except for
refer to “Quick Guide to Precision Measuring 0-25mm/0-1” measuring range). ø8
No center concavity
Instruments”.
B • Non-rotating spindle type.
( ): Adjustable measuring force type

• Measurable range of gear pitch: 0.5 to 6

Battery for 369 and 227 series
module (series 227: 0.4 to 3 module). SR44 (1 pc), 938882
Digimatic (LCD)
369-250
Optional accessories
• Connecting cables
for 369-250~253, 369-350~353
1m: 05CZA662
2m: 05CZA663
• USB Input Tool Direct
Quickmike type (LCD) USB-ITN-B (2m): 06ADV380B
369-411 • SPC cables for U-WAVE w/ data switch (160mm):
02AZD790B
For foot switch: 02AZE140B
(Refer to page A-21 for details.)
• SPC cables for Quickmike and micrometers with
adjustable measuring force device
Quickmike type with adjustable measuring force (LCD) 937387: SPC cable (1m)*
227-221 965013: SPC cable (2m)*
• only for Quickmike and micrometers with adjustable
measuring force device
06ADV380E : USB Input Tool Direct with data switch(2m)
02AZD790E : SPC cable for U-WAVE (160mm)
For footswitch: 02AZE140E
169-201

SPECIFICATIONS
Metric
Order No. Range Resolution Accuracy* Anvil dia. Flatness Parallelism Measuring force
369-250 0 - 25mm
±4µm 4µm
369-251 25 - 50mm
Digimatic (LCD) —
369-252 50 - 75mm
±6µm ø20 6µm
369-253 75 - 100mm
369-411 0 - 30mm 0.001mm 1µm
Quickmike type (LCD) 4µm —
369-412 25 - 55mm
Quickmike type 227-221 0 - 15mm ±4µm 0.5N - 2.5N Quickmike
adjustable measuring ø14.3 3µm Provides a speedy spindle feed of 10mm per thimble
force (LCD) 227-223 0 - 10mm 2N - 10N
rotation, which enables widely differently sized features
* Excluding quantizing error to be measured quickly.
Metric
Order No. Range Graduation Accuracy Anvil dia. Flatness Parallelism Measuring force Quickmike type with adjustable
169-201 0 - 25mm measuring force
±4µm 4µm
169-202 25 - 50mm Digimatic micrometer dedicated to applications requiring
Analog 0.01mm ø20 1µm — a constant/low measuring force such as measuring wire,
169-205 50 - 75mm
±6µm 6µm paper, and plastic/rubber parts.
169-207 75 - 100mm

Inch/Metric
Order No. Range Resolution Accuracy* Anvil dia. Flatness Parallelism Measuring force
369-350 0 - 1"
±.0002" .00016"
369-351 1" - 2"
Digimatic (LCD) ø20 .00004" —
369-352 2" - 3" .00005"/
±.0003" .00024"
369-353 3" - 4" 0.001mm
369-421 0 - 1.2"
Quickmike type (LCD) ±.0002" ø20 .00004" .00016" —
369-422 1" - 2.2"
* Excluding quantizing error
Inch
Order No. Range Graduation Accuracy Anvil dia. Flatness Parallelism
169-203 0 - 1"
±.0002" .00016"
169-204 1" - 2"
Analog .001" ø20 .00004"
169-206 2" - 3"
±.0003" .00024"
169-208 3" - 4"

B-35 Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances.
Therefore the company reserves the right to change any or all aspects of any product specification without notice.
 DIMENSIONS
Unit: mm
Digital models up to 75mm
b L 42.5 2.3 3 41 11.5 17
a 45.6
14.2
B

ø18
ø6.35

ø14

Adjustable measuring force type

C

12.2 28.8 69.6 54 18.1

recess )
(Without
ø14.3

ø6.35

ø24.5
ø24.9
0.4

Digital models over 75mm 25

b L 14.5 6.5 47.2 2.3 3 41 11.5 17

a 32
ø18
ø6.35
c

Analog models up to 50mm

b L 14.5 3 47 15.5 17
a 31.5
ø8

ø18
0
45
C

Quickmike type
b L 65.6 50.4
ø
a 46.3 4
ø24.9

Analog models over 50mm

L 14.5 3 47 15.5 17
C

b
a 31.5
ø8

5
ø18

0
45
C

Digital models
Range L a b c
0 - 25mm 58.5 12.9 7 32
25 - 50mm 83.5 12.9 9.8 47
50 - 75mm 108.5 12.9 11.2 60
75 - 100mm 112.5 5.5 13.5 60
0 - 30mm* 63.8 13.5 8.5 36 Analog models
25 - 55mm* 88.8 13.5 10.3 47 Range L a b c
*Quickmike type 0 - 25mm 37.5 6 13.5 25
25 - 50mm 62.5 6 13.5 32
50 - 75mm 87 5.5 13 49
75 - 100mm 112 5.5 13 63

Mitutoyo operates a policy of continuous improvement that aims to provide the customer with the benefit of the latest technological advances. B-36
Therefore the company reserves the right to change any or all aspects of any product specification without notice.