1

The BVA Advantage

BVA Industrial Hydraulics was launched in 2005 and is centrally located in Europe in Etten-Leur,
The Netherlands. BVA is one of the Shinn Fu Europe brands besides Omega Lift, Omega Mechanix
and Prolift. Shinn Fu was founded in Taiwan in 1971 and began doing business in Europe in 1994.
Shinn Fu has over 2,000 Employees worldwide with its headquarters in Taipei, Taiwan.

&RnÀdenFe BXiOt Rn 4XaOity

ISO 9001
BVA products are manufactured through an International Quality Assurance System, ISO 9001 which
involves consistent observation of administration, management, manufacturing, and production control.
Under this system, the related operations are monitored on all aspects from purchase order to assembly
line and to shipping the order.

3rRdXFtV FRmSOy Zith the fROORZing indXVtry VtandardV

Directive 2006/42/EC
Standard EN1494:2000+A1:2008
MT20
ASME B30.1
The cylinders comply with load testing requirements and / or the safety factor for material yield strength
while still functioning properly without oil leakage.

ANSI B40.1
BVA pressure gauges meet the criteria for grade A.

SAE 100
BVA hydraulic hoses comply with the 0aterial +andling Institute¶s speci¿cation of minimum life cycles
and minimum burst pressure rating.

BVA Limited Lifetime Warranty

BVA products are warranted to be free of defects in materials and workmanship. Any BVA
product that does not conform to speci¿cation will be repaired or credited at BVA¶s option at BVA¶s
expense for the life of the product. Contact BVA for disposition of this warranty.

This warranty does not cover ordinary wear and tear, abuse, misuse, alteration or use of
improper Àuids or maintenance as determined by BVA and its authori]ed service centers. All electric
motors, gas engines, batteries and other parts or materials sold with or part of BVA products but are
separately warranted by another manufacturer, are covered by that manufacturer¶s warranty
and not the BVA Lifetime Warranty. BVA shall not be liable for consequential or incidental damage
or loss.

Repair Parts Contact BVA Website

We offer a large range of For technical support, or for To view our most up-to-date
product replacement parts, questions about your product, catalog or view our new
please contact your local contact your local BVA product, visit our website:
BVA dealer for more details. dealer. www.BVA-hydraulics.com

2
 MRdeO 1XmEer ,nde[
Cylinders
H 6 HL 16 HLN 22 HP 26 HDG 32 Accessoires 40

HG 10 HF 18 HLNF 24 HPD 27 HDU 36

HU 14 HC 20 HT 25 HD 28 HDC 38
Pages 6-41

Pumps
Single Acting All Position Rotary Air 3-Phase
P 44 PA 47 PAR 50 PE 56
Hand Pumps Air Pumps Pumps Electric Pumps
Double Acting Single Acting Universal Motor Gas Engine
P 44 PA 48 PU 51 PG 57
Hand Pumps Air Pumps Pumps Pumps
Double Acting 1-Phase Diesel Engine
P57 Foot Pumps 46 PA 48 PE 52 PD 57
Air Pumps Electric Pumps Pumps
Pages 44-59

Combo Kits
H General Purpose Cylinder Combinations 60 HL Low Pro¿le Cylinder Combinations 61

HF Flat Body Cylinder Combinations 60 HLN Lock Nut Cylinder Combinations 61

HC Hollow Hole Cylinder Combinations 61 HU Aluminum Cylinder Combinations 61

Pages 60-61

Control Valves & Accessories

Flow Control 62 Gauge 65 Pressure 66 Hydraulic 67 Manifold 68 Fittings 71
Valves Adapters Switch Couplers Blocks

Manifolds 64 Hydraulic 66 Foot Pedals 66 Hydraulic 67 Directional

69
Oil Hoses Control Valves
Pressure 65 External 66 Coupler 66 Solenoid 68 Pump Mounted
70
Gauges Pressure Adj Dust Cover Valves Valves

Pages 62-71

Air/Manual Bottle Bolt Puller/

Presses/Bottle Jacks/Pullers
Heavy Duty Presses 74 79 89 BVA Bag 92
Jacks King Pin Press
Hydraulic
76 Toe Jacks 79 Pad Eye Tester 90 Maintenance 93
Manual Press

Electrical Press 77 Pullers 80 Flange Spreaders 91 Pipe Bender 93

Manual Bottle Jacks 78 Hydraulic Gear Pullers 88 Spreaders 91

Pages 74-93
Hydraulic Nut Splitter
Mini Jacks 78 Hydraulic Bench Vise 88 92
w/ Case

Tools/ Equipment

Container Lifting System 94 Hydraulic Mounting Clamp 96 Support Pads 99

Container Moving System 95 Movable Base Plates 97

Ring Mounting Clamp-Hydraulic 96 Stabilisation Blocks 98

Pages 94-99

Cross-Reference & Engineering

BVA Cross Reference Chart 100 Hydraulic Formula Reference 104

Safety Instructions 102 BVA in action 106

Maintaining Your Equipment 104 About BVA 107

© Copyright 2016 SFEU Companies

All rights reserved. Any copying or other use of the material in this catalog (text, illustrations, drawings, photos) without
prior express written consent is prohibited. Information in this catalog is subject to change without prior notice.
3
 H DC 30 06 T
&yOinder Matri[ &hart 1 2 3 4 5
Cylinder Cylinder Cylinder Cylinder 6XI¿[
Type Options Capacity Stroke Code

1 - Cylinder Type 3 - Cylinder Capacity 4 - Cylinder Stroke

H Hydraulic Cylinder
02 2, 2.5 Tons 75 75 Tons 00 0.63"/16mm
04 4 Tons 100 100 Tons 01 1"/ 25 mm
2 - Cylinder Options 05 5 Tons 150 150 Tons 02 2"/ 51 mm
09 9 Tons 160 160 Tons 04 4"/ 102 mm
C S/A - Hollow Hole 10 10 Tons 200 200 Tons 05 5"/ 127 mm
D D/A - General Purpose 12 12 Tons 250 250 Tons 06 6"/ 152 mm
DC D/A - Hollow Hole 15 15 Tons 300 300 Tons 08 8"/ 203 mm
DG D/A - High Tonnage 16 16 Tons 400 400 Tons 10 10"/ 254mm
F S/A - Flat Body 20 20 Tons 500 500 Tons 12 12"/ 305mm
G S/A - Load Return High Tonnage 25 25 Tons 600 600 Tons 13 13"/ 330mm
L S/A - Low Pro¿le 30 30 Tons 700 700 Tons 14 14"/ 356mm
LN S/A - Lock Nut 50 50 Tons 800 800 Tons 18 18"/ 457mm
LNF S/A - Lock Nut Low Pro¿le 55 55 Tons 1,000 1,000 Tons 20 20"/ 508mm
P S/A - Pull 60 60 Tons 1,500 1,500 Tons 24 24"/ 610mm
PD Precision Double Acting 75 75 Tons 32 32"/ 813mm
T S/A - Threaded
U S/A - Aluminum 6XI¿[&RGH
UC S/A - Aluminum Hollow Hole T With internal Threads, HC Series only
UDC D/A - Aluminum Hollow Hole XT No internal Threads, HC Series only
ULN S/A - Aluminum Lock Nut B Flat Body Cylinder Kit

Cylinder Accessories Safety Practices Safety Instructions

See the assortment Good industry practice Visit our DO¶S and DON¶TS
of accessories designed recommends not exceeding section to review the best
to work with our products. 80% of maximum rated methods of operation.
pg 40 pg102
capacities of all our products. Always be prepared.

Heavy duty, heat treated, grooved

saddle provides better surface
traction during operation

Steel stop ring for plunger

over travel protection
Plunger wiper seals out dirt and
contamination

Industrial hard chrome plated plunger

prevents scratching and corrosion
Collar ¿xture threads

One piece steel plunger stopper for extra

Cylinders are burnish rolled giving a
strength and preventing over travel
smoother ¿nish than honing, which
reduces scoring and prolongs seal life

One piece high grade alloy bearing

for side load protection and long life

Polyurethane cup seal provides

optimum performance

High Àow ball coupler

provides more Àow than
conventional couplers
Rectangular return spring design
eliminates spring breakage and
provides quicker retraction

4
 &yOinder TySe
Ma[ &aSaFity Ma[ 6trRNe
&yOinder Page 1XmEer 
Range Range
6erieV ReferenFe ,mage
(tons) (in)

H Single Acting Cylinders 5-100 25-362 6-9

Cylinders
HG High Tonnage Single 100-1000 182-1114 10-13
Acting Cylinders

HU Aluminum Single 20-100 50-297 14-15

Acting Cylinders

HL /RZ3UR¿OH&\OLQGHUV 10-100 38-57 16-17

HF Flat Body Cylinders 5-150 16 18-19

HC Hollow Plunger Cylinders 12-100 8-155 20-21

HLN Lock Nut Cylinders 50-300 50-300 22-23

HLNF /RZ3UR¿OH/RFN1XW 60-250 45-50 24

Cylinders

HT Threaded Cylinders 10-20 131-253 25

HP Pull Cylinders 2.5-10 127-141 26

HPD Precision Double 9-16 1.77-3.14 27

Acting Cylinders

HD Double Acting Cylinders 10-100 155-461 28-31

HDG High Tonnage Double

Acting Cylinders 100-1000 50-300 32-35

Aluminum Double
HDU Acting Cylinders 20-30 50-150 36-37

Double Acting Plunger

HDC Hole Cylinders 30-150 38-257 38-39

40-41
- Cylinder Accessories - -

- Pump Matching Chart - - 42

3XmSV 6eFtiRn Page 44

PXmSV&yOinder &RmER·V Page 60

5
 6ingOe AFting &yOinderV
H Series - General Purpose, Spring Return

Capacity:
5 - 100 Tons

Stroke:
25 - 362 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR

0LQ0D[+HLJKW
92 - 838 mm

H10010
H1514

H7513
* Larger Tonnages
For tonnages that exceed
100, please refer to our HG
Section
pg10

H1501

Single Acting Cylinder H1506 in the collapsed

position with CB15 cylinder base for safety.

Single Acting Cylinder H5513 in the collapsed

position ready to lift a load

• Collar threads and base

mounting holes for ¿xturing
• Hard chrome plated piston
plunger protects against
corrosion and damage
• Polyurethane U-Cup seals
provide a sure seal and long life
• Solid one piece alloy steel body
• One piece aluminum alloy
bearing protects against
Safety Practices
cylinder wall damage
Good industry practice • CH38F high Àow coupler with
recommends not exceeding dust cap is standard on all
80% of maximum rated
capacities of all our products.
cylinders

HU Series – Aluminum Cylinders

Aluminum cylinders make a
great lightweight alternative
being up to 60% lighter
than comparable
pg 14
steel models.

6
 Quick Selection Guide

Cylinder Collapsed Oil

Stroke Model Weight
Capacity Height Capacity
(mm) Number (kg)
(mm) (cc)

25 H0501 116 16 1.4

H Series

Cylinders
78 H0503 169 50 1.5
5 Ton
129 H0505 221 83 1.8
44 kN
180 H0507 272 116 2.1 Cylinder Accessories
229 H0509 324 148 2.5 See the assortment
of accessories designed
25 H1001 92 36 1.8 to work with our products.
pg 40

51 H1002 123 74 2.3

102 H1004 174 147 3.5

10 Ton
151 H1006 250 218 4.3 Combo Kits
89 kN Most cylinders are available
202 H1008 301 292 5.1 in easy to order kits: Cylinder,
Gauge, Couplers, Hose
253 H1010 352 366 5.9 pg 60
and Pump.
304 H1012 403 439 6.8

356 H1014 450 515 7.6

25 H1501 124 50 3.1 Related Product: Gauges

Reduce the risk of overloading
51 H1502 149 103 3.9 your product by using a gauge.
A variety of graduations and
101 H1504 200 205 5.0 types to suit any need. pg 65

152 H1506 270 308 6.7

15 Ton
133 kN 203 H1508 321 411 7.8

254 H1510 372 515 9.1 Safety Instructions

Visit our DO¶S and DON¶TS
305 H1512 423 618 10.2 section to review the best
methods of operation.
356 H1514 474 721 11.4 pg102
Always be prepared.
26 H2501 143 86 5.5

51 H2502 168 170 6.4

102 H2504 219 339 8.2

High-Flow Couplers
High-Flow Coupler: CH38F is
155 H2506 272 515 10.1 included on all models except
25 Ton
222 kN where speci¿ed.
206 H2508 323 684 11.9

257 H2510 374 854 13.7

310 H2512 426 1030 15.6

362 H2514 476 1203 17.4

Optional Tilt-Saddles
30 Ton 210 H3008 387 879 18.5
267 kN Saddles tilt to a 5% maximum to adjust to
the load. Match up these saddles with the
51 H5502 176 360 15.0 following cylinders:

103 H5504 227 730 18.6 SDT05 ĺ H05 Cylinders

55 Ton
489 kN
159 H5506* 283 1126 26.1 SDT10 ĺ H10 Cylinders
260 H5510* 385 1844 30.6
SDT15 ĺ H15 Cylinders
337 H5513* 461 2388 39.5
SDT25 ĺ H25 Cylinders
156 H7506* 285 1620 33.6
75 Ton
667 kN
SDT55 ĺ H55, H75, H100 Cylinders
333 H7513* 492 3459 55.3

51 H10002* 219 677 29.9

100 Ton 168 H10006* 357 2229 57.6
890 kN
pg 41
260 H10010* 449 3453 69.4

6HHSDJHVIRUGHWDLOHGVSHFL¿FDWLRQV
* Cylinder is equipped with carrying handle.

7
 6ingOe AFting &yOinderV
H Series - Spring Return

Cylinder
Cylinder Oil
Stroke Model Effective Weight
Capacity Capacity
(mm) Number Area (kg)
(cc)
(cm2)

25 H0501 6.5 16 1.4

78 H0503 6.5 50 1.5

5 Ton 129 H0505 6.5 83 1.8
44 kN
180 H0507 6.5 116 2.1

229 H0509 6.5 148 2.5

25 H1001 14.5 36 1.8

Y
51 H1002 14.5 74 2.3

102 H1004 14.5 147 3.5

X
151 H1006 14.5 218 4.3
D 10 Ton
89 kN 202 H1008 14.5 292 5.1

253 H1010 14.5 366 5.9

F 304 H1012 14.5 439 6.8

356 H1014 14.5 515 7.6

K
25 H1501 20.3 50 3.1

J 51 H1502 20.3 103 3.9

E
101 H1504 20.3 205 5.0

152 H1506 20.3 308 6.7

15 Ton
L 133 kN 203 H1508 20.3 411 7.8

254 H1510 20.3 515 9.1

H B
305 H1512 20.3 618 10.2

356 H1514 20.3 721 11.4

26 H2501 33.2 86 5.5

A
51 H2502 33.2 170 6.4
C
102 H2504 33.2 339 8.2
3/8"-18NPTF
155 H2506 33.2 515 10.1
25 Ton
222 kN 206 H2508 33.2 684 11.9

257 H2510 33.2 854 13.7

G Z
310 H2512 33.2 1030 15.6

362 H2514 33.2 1203 17.4

30 Ton 210 H3008 41.9 879 18.5
267 kN
51 H5502 70.8 360 15.0

103 H5504 70.8 730 18.6

55 Ton 159 H5506* 70.8 1126 26.1
489 kN
260 H5510* 70.8 1844 30.6

337 H5513* 70.8 2388 39.5

156 H7506* 103.9 1620 33.6

75 Ton
667 kN 333 H7513* 103.9 3459 55.3

51 H10002* 132.8 677 29.9

100 Ton 168 H10006* 132.8 2229 57.6
890 kN
260 H10010* 132.8 3453 69.4

* Cylinder is equipped with carrying handle.

8
 Base Mounting Hole
Base Collar Plunger
Collapsed ([WHQGHG Cylinder Outside Plunger Saddle Plunger (mm)
to Inlet Collar Thread Thread
Model Height Height Bore Dia. Dia. Dia. Internal
Port Thread Length Length Bolt Thread
Number A B C D E F Thread Thread
G H L K

Cylinders
(mm) (mm) (mm) (mm) (mm) (mm) J Circle Depth
(mm) (mm) (mm) Y
X Z

H0501 116 142 29 38 25 25 20 1½”-16N 28 ¾”-16UNF 16 25 ¼”-20UNC 14

H0503 169 247 29 38 25 25 20 1½”-16N 28 ¾”-16UNF 16 25 ¼”-20UNC 14

H0505 221 350 29 38 25 25 20 1½”-16N 28 ¾”-16UNF 16 25 ¼”-20UNC 14

H0507 272 452 29 38 25 25 20 1½”-16N 28 ¾”-16UNF 16 25 ¼”-20UNC 14

H0509 324 552 28 38 25 25 20 1½”-16N 28 ¾”-16UNF 16 25 ¼”-20UNC 14

H1001 92 117 43 57 38 - 20 2¼”-14UN 30 - 6 40 /16”-18UNC

5
14

H1002 123 174 43 57 38 35 20 2¼”-14UN 30 1”-8UNC 20 40 /16”-18UNC

5
14

H1004 174 276 43 57 38 35 20 2¼”-14UN 30 1”-8UNC 20 40 /16”-18UNC

5
14

H1006 250 401 43 57 38 35 20 2¼”-14UN 30 1”-8UNC 20 40 /16”-18UNC

5
14

H1008 301 503 43 57 38 35 20 2¼”-14UN 30 1”-8UNC 20 40 /16”-18UNC

5
14

H1010 352 605 43 57 38 35 20 2¼”-14UN 30 1”-8UNC 20 40 /16”-18UNC

5
14

H1012 403 707 43 57 38 35 20 2¼”-14UN 30 1”-8UNC 20 40 /16”-18UNC

5
14

H1014 450 806 43 57 38 35 20 2¼”-14UN 30 1”-8UNC 20 40 /16”-18UNC

5
14

H1501 124 149 51 70 41 38 20 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H1502 149 200 51 70 41 38 20 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H1504 200 301 51 70 41 38 20 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H1506 270 422 51 70 41 38 25 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H1508 321 524 51 70 41 38 25 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H1510 372 626 51 70 41 38 25 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H1512 423 728 51 70 41 38 25 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H1514 474 830 51 70 41 38 25 2¾”-16UN 30 1”-8UNC 25 48 Ǫ”-16UNC 13

H2501 143 169 65 85 57 50 25 35/16”-12N 49 1½”-16UNC 30 59 ½”-13UNC 19

H2502 168 219 65 85 57 50 25 3 /16”-12N

5
49 1½”-16UNC 30 59 ½”-13UNC 19

H2504 219 321 65 85 57 50 25 35/16”-12N 49 1½”-16UNC 30 59 ½”-13UNC 19

H2506 272 427 65 85 57 50 25 35/16”-12N 49 1½”-16UNC 30 59 ½”-13UNC 19

H2508 323 529 65 85 57 50 25 3 /16”-12N

5
49 1½”-16UNC 30 59 ½”-13UNC 19

H2510 374 631 65 85 57 50 25 35/16”-12N 49 1½”-16UNC 30 59 ½”-13UNC 19

H2512 426 736 65 85 57 50 25 35/16”-12N 49 1½”-16UNC 30 59 ½”-13UNC 19

H2514 476 838 65 85 57 50 25 3 /16”-12N

5
49 1½”-16UNC 30 59 ½”-13UNC 19

H3008 387 597 73 102 57 50 50 35/16”-12N 49 1½”-16UNC 30 56 ½”-13UNC 19

H5502 176 227 95 127 80 70 31 5”-12UN 55 - - 95 ½”-13UNC 19

H5504 227 330 95 127 80 70 31 5”-12UN 55 - - 95 ½”-13UNC 19

H5506* 283 442 95 127 80 70 31 5”-12UN 55 - - 95 ½”-13UNC 19

H5510* 385 645 95 127 80 70 31 5”-12UN 55 - - 95 ½”-13UNC 19

H5513* 461 798 95 127 80 70 31 5”-12UN 55 - - 95 ½”-13UNC 19

H7506* 285 466 115 147 95 70 30 5¾”-12UN 45 - - 100 ¾”-10UNC 22

H7513* 492 825 115 147 95 70 30 5¾”-12UN 45 - - 100 ¾”-10UNC 22

H10002* 219 270 130 159 105 70 38 6¼”-12UN 55 - - - - -

H10006* 357 525 130 159 105 70 40 67/8”-12UN 45 - - 140 ¾”-10UNC 25

H10010* 449 709 130 159 105 70 40 67/8”-12UN 45 - - 140 ¾”-10UNC 25

* Cylinder is equipped with carrying handle.

9
 +igh TRnnage 6ingOe AFting &yOinderV
HG series - Heavy Lifting, Load Return

Capacity:
100 - 1000 Tons

Stroke:
50 - 300 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR

0LQ0D[+HLJKW
182 - 1114 mm

HG15006
HG20002
HG10004

Flow Control Valves

Control the speed of your
cylinder by adding a Àow
control valve.
pg 62

Related Product: Hoses

We offer a variety of
hoses, ¿ttings, lengths
and materials.
pg 67

Gas/Diesel Engine Pumps Electric Motor Pumps

These HDG cylinders pair up well with a Gas or Diesel Engine pump. We These HG cylinders pair up well with Electric Motor pumps.
offer a variety of different Àow rates, motor si]es and reservoir si]es on our We offer a variety of different Àow rates and motor si]es.
gas/diesel engine pumps. Contact your local BVA dealer for more details. Contact your local BVA dealer for more details.

• Gas engine pump will provide 700 BAR. • Meets OSHA regulations for
hydraulic force at remote locations sound 80dBA
• Industrial grade 5.5 hp. 4.1 kN Honda • Two speed pump designed for rapid
gas engine or 4.6 hp. 3.5 kN HATZ cylinder advance
diesel engine. • Internal ¿lter screens contamination
• Ideal for applications where electricity to prevent pump damage
isn¶t easily accessible. • All units are wired as 230 VAC 50 H]
• Two speed pump designed for rapid Optional wiring 120 VAC 50H]
cylinder advance • 100% Duty Cycle TEFC motors
• Gas pump features a sturdy protective • All hand pendants are wired at
roll cage for use in the toughest 24VAC for safety
environments • Full load starting capability
• Optional electric start with
Diesel Engine

10
 Quick Reference Guide

Cylinder Collapsed Oil

Stroke Model Weight

Cylinders
Capacity Height Capacity
(mm) Number (kg)
(mm) (cc)

50 HG10002 182 664 27.7 HG Series

100 HG10004 232 1327 33.6

150 HG10006 282 1991 39.5

100 Ton Safety Practices
890 kN 200 HG10008 332 2655 45.4 Good industry practice
recommends not exceeding
250 HG10010 382 3318 51.7 80% of maximum rated
capacities of all our products.
300 HG10012 432 3982 57.6

50 HG15002 196 981 46.3

100 HG15004 246 1963 55.3

Optional Tilt-Saddles
150 HG15006 296 2978 64.4 Saddles tilt to a 5% maximum
150 Ton
1334 kN to adjust to the load. View our
200 HG15008 346 3926 73.5 cylinder accessories page to
¿gure out what saddle best
250 HG15010 396 4907 82.1
¿ts these cylinders. pg 41
300 HG15012 446 5889 91.6

50 HG20002 216 1322 54.9

150 HG20006 316 3989 91.2 Related Product: Gauges

200 Ton Reduce the risk of overloading
1779 kN 200 HG20008 366 5289 109.8 your product by using a gauge.
A variety of graduations and
300 HG20012 466 7977 146.1 types to suit any need. pg 65

50 HG30002 312 2281 184.2

300 Ton* 150 HG30006 412 6843 231.8
2669 kN
Safety Instructions
300 HG30012 562 13685 303.0
Visit our DO¶S and DON¶TS
50 HG40002 374 2800 269.9 section to review the best
methods of operation.
400 Ton* pg102
150 HG40006 474 8399 330.2 Always be prepared.
3559 kN
300 HG40012 625 17077 420.9

50 HG50002 419 3653 401.0

High-Flow Couplers
500 Ton*
150 HG50006 519 10959 479.9 High-Flow Coupler: CH38F is
4448 kN
included on all models except
300 HG50012 669 21919 599.2 where speci¿ed.
50 HG60002 429 4277 474.0

150 HG60006 529 12829 565.2

600 Ton*
5338 kN 250 HG60010 457 23088 430.0

300 HG60012 679 25662 700.8

50 HG80002 474 5881 741.2

800 Ton* 150 HG80006 574 17649 868.2
7117 kN
300 HG80012 724 35281 1057.8

50 HG100002 564 7329 1061.9

1000 Ton* 150 HG100006 664 21991 1212.9
8896 kN
300 HG100012 814 43966 1438.8

*Available on request: no stock item

See next pages (pg.12-13) to view more detail stats on High Tonnage Single Acting Cylinders.

11
 +igh TRnnage 6ingOe AFting &yOinderV
HG Series - Heavy Lifting, Load Return

E
F

A HG100
3/8"-18NPTF HG150
HG200
C

G
Z

Y
X
Cylinder
D Cylinder Stroke Model Effective Oil Capacity Weight
Capacity (mm) Number Area (cc) (kg)
(cm2)
Optional Tilt-Saddles 50 HG10002 132.7 664 27.7
Saddles tilt to a 5% maximum 100 HG10004 132.7 1327 33.6
to adjust to the load. View our
cylinder accessories page to 100 Ton 150 HG10006 132.7 1991 39.5
¿gure out what saddle best 890 kN 200 HG10008 132.7 2655 45.4
¿ts these cylinders. pg 41
250 HG10010 132.7 3318 51.7
300 HG10012 132.7 3982 57.6
50 HG15002 196.3 981 46.3
High-Flow Couplers
100 HG15004 196.3 1963 55.3
High-Flow Coupler: CH38F is
included on all models except 150 Ton 150 HG15006 198.6 2978 64.4
where speci¿ed. 1334 kN 200 HG15008 196.3 3926 73.5
250 HG15010 196.3 4907 82.1
300 HG15012 196.3 5889 91.6

Related Product: Gauges 50 HG20002 264.5 1322 54.9

Reduce the risk of overloading 150 HG20006 265.9 3989 91.2
200 Ton
your product by using a gauge.
1779 kN 200 HG20008 264.5 5289 109.8
A variety of graduations and
types to suit any need. pg 65 300 HG20012 265.9 7977 146.1
50 HG30002 456.2 2281 184.2
300 Ton* 150 HG30006 456.2 6843 231.8
2669 kN
Safety Instructions 300 HG30012 456.2 13685 303.0
Visit our DO¶S and DON¶TS 50 HG40002 559.90 2800 269.9
section to review the best
400 Ton* 150 HG40006 559.9 8399 330.2
methods of operation.
pg102 3559 kN
Always be prepared.
300 HG40012 559.9 17077 420.9
50 HG50002 730.7 3653 401.0
500 Ton* 150 HG50006 730.7 10959 479.9
4448 kN
300 HG50012 730.7 21919 599.2
50 HG60002 855.3 4277 474.0

600 Ton* 150 HG60006 855.3 12829 565.2

5338 kN 250 HG60010 865.7 23088 430.0
300 HG60012 855.3 25662 700.8
50 HG80002 1176 5881 741.2
800 Ton* 150 HG80006 1176 17649 868.2
7117 kN
300 HG80012 1176 35281 1057.8
50 HG100002 1465 7329 1061.9
1000 Ton* 150 HG100006 1465 21991 1212.9
8896 kN
300 HG100012 1465 43966 1438.8

* Available on request: no stock item

12
 Cylinders
HG Series

Safety Practices
HG300 - HG1000 Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

Collapsed ([WHQGHG Cylinder Outside Plunger Saddle Base To Base Mounting Holes
Model Height Height Bore Dia. Dia. Dia. Dia. Inlet Port Bolt Thread
Thread
Number A B C D E F G Circle X Depth Z
Size
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm)
HG10002 182 232 130 89 95 75 54 95 M12 22
HG10004 232 332 130 89 95 75 54 95 M12 22
HG10006 282 432 130 89 95 75 54 95 M12 22
HG10008 332 532 130 89 95 75 54 95 M12 22
HG10010 382 632 130 89 95 75 54 95 M12 22
HG10012 432 732 130 89 95 75 54 95 M12 22
HG15002 196 246 158 205 110 94 61 130 M12 22
HG15004 246 346 158 205 110 94 61 130 M12 22
HG15006 296 446 158 205 110 94 61 130 M12 22
HG15008 346 546 158 205 110 94 61 130 M12 22
HG15010 396 646 158 205 110 94 61 130 M12 22
HG15012 446 746 158 205 110 94 61 130 M12 22
HG20002 216 266 183 235 135 113 67 165 M12 20
HG20006 316 466 184 235 135 113 67 165 M12 20
HG20008 366 566 183 235 135 113 67 165 M12 20
HG20012 466 766 184 235 135 113 67 165 M12 20
HG30002 312 362 241 310 197 177 101 180 M16 36
HG30006 412 562 241 310 197 177 101 180 M16 36
HG30012 562 862 241 310 197 177 101 180 M16 36
HG40002 374 424 267 350 216 196 114 205 M16 36
HG40006 474 625 267 350 216 196 114 205 M16 36
HG40012 625 930 267 350 216 196 114 205 M16 36
HG50002 419 469 305 400 248 228 114 250 M24 38
HG50006 519 669 305 400 248 228 114 250 M24 38
HG50012 669 969 305 400 248 228 114 250 M24 38
HG60002 429 479 330 430 267 247 114 275 M24 38
HG60006 529 679 330 430 267 247 114 275 M24 38
HG60010 457 724 332 433 229 200 114 275 M24 38
HG60012 679 979 330 430 267 247 114 275 M24 38
HG80002 474 524 387 505 317 297 149 330 M24 38
HG80006 574 724 387 505 317 297 149 330 M24 38
HG80012 724 1024 387 505 317 297 149 330 M24 38
HG100002 564 614 432 560 343 323 174 375 M24 38
HG100006 664 814 432 560 343 323 174 375 M24 38
HG100012 814 1114 432 560 343 323 174 375 M24 38

13
 AOXminXm 6ingOe AFting &yOinderV
HU Series - General Purpose, Spring Return, Lightweight

Capacity:
20 - 100 Tons

Stroke:
50 - 254 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR

0LQ0D[+HLJKW
HU5506
174 - 636 mm

HU10006 HU2006

• Lightweight aluminum
alloy construction AOXminXm vV 6teeO
• Up to 60% lighter than
comparable tonnage steel cylinders &yOinderV
• Convenient carry handle on Aluminum cylinders provide a great alternative to the traditional steel cylinder in many
applications. Being up to 60% lighter in weight, Aluminum cylinders are easier portable and
50 and 100 ton models
reduce user fatigue and strain. However, due to the ¿nite properties of Aluminum vs. Steel,
• Hard anodi]ed aluminum plunger these cylinders should NOT be used in high cycle applications. The BVA Aluminum cylinders
provides extra protection against are designed for a maximum safety rating of 5,000 cycles. Under normal lifting applications this
should provide a long service life.
corrosion and wear
• Integral steel protective plate
• Maximum working pressure:
10,000 psi / 700 bar

HU5506 H5506
Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated Aluminum Cylinders Steel Cylinders
capacities of all our products.
• 60% lighter in weight than steel • Much heavier than aluminum cylinders
• Easier portable and reduces user fatigue • Low portability on heavier cylinders which
• Not to be used for high cycle applications creates user fatigue and strain
• Under normal conditions, the maximum • Will out-perform aluminum cylinders in
High-Flow Couplers rated safety cycle life is 5,000 cycles higher cycle applications
High-Flow Coupler: CH38F is • Base of the cylinder contains a steel plate* • Can exceed aluminum cylinders maximum
included on all models except safety cycle life of 5,000 cycles.
where speci¿ed.

*The base of the cylinders contain a steel plate with mounting holes that are designed to protect the cylinder
from damage and should NOT be used in ¿xturing applications and ONLY be used to attach larger base
mounting plates for lifting stability. They are NOT designed to withstand the full ratings of the cylinders.

14
 E

Cylinders
HU Series

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

B A

Ǫ”-18NPTF Related Product: Hoses

We offer a variety of
hoses, ¿ttings, lengths
and materials.
pg 67

C Safety Instructions
Visit our DO¶S and DON¶TS
D
section to review the best
methods of operation.
pg102
Always be prepared.

Cylinder Collapsed ([WHQGHG Cylinder Outside Plunger Saddle Base to

Cylinder Oil
Stroke Model Effective Height Height Bore Dia. Dia. Dia. Dia. Inlet Port Weight
Capacity Capacity
(mm) Number Area A B C D E F G (kg)
(cc)
(cm²) (mm) (mm) (mm) (mm) (mm) (mm) (mm)

50 HU2002 31.2 156 174 224 63 85 51 40 27 3.0

20 Ton 100 HU2004 31.2 312 224 324 63 85 51 40 27 3.7
178 kN
150 HU2006 31.2 468 274 424 63 85 51 40 27 4.4

50 HU3002 44.2 221 181 231 75 100 60 40 34 4.7

30 Ton 100 HU3004 44.2 442 231 331 75 100 60 40 34 5.4
267 kN
150 HU3006 44.2 663 281 431 75 100 60 40 34 6.1

50 HU5502* 70.9 354 186 236 95 130 80 70 30 7.6

100 HU5504* 70.9 709 236 336 95 130 80 70 30 10.3

50 Ton 150 HU5506* 70.9 1063 286 436 95 130 80 70 30 11.6
445 kN
200 HU5508* 70.9 1418 336 536 95 130 80 70 30 12.3

250 HU5510* 70.9 1772 386 636 95 130 80 70 30 14.2

51 HU10002* 133.6 678 165 216 130 203 109 89 38 16.3

102 HU10004* 133.6 1357 216 318 130 203 109 89 38 19.5
100 Ton
890 kN 152 HU10006* 133.6 2039 267 419 130 203 109 89 38 23.1

254 HU10010* 133.6 3392 368 622 130 203 109 89 38 30.8

* Are equipped with carrying handles.

15
 LRZ PrRÀOe &yOinderV
HL Series - Low Clearance Lifting

• Compact design for use in con¿ned spaces

• Plunger wiper helps seal out dirt and contamination
• Specially designed return spring provides quick
retraction and extends the life of the spring
• Hard chrome plated plunger helps prevent
scratching and corrosion
• Plunger end is grooved to reduce load slippage
• Includes high Àow coupler and dust cap
• HL1001, HL2002, and HL3002 coupler
is tilted 5° for added clearance

HL Series

E Z
Y

5°

C
3/8"-18NPTF D

/RZSUR¿OHF\OLQGHUVDUHJUHDWIRUFRQ¿QHGVSDFHV
Cylinder
Cylinder Oil
Stroke Model Effective Weight
Capacity Capacity
(mm) Number Area (kg)
(cc)
(cm2)
10 Ton 38 HL1001 15.2 58 2.6
89 kN
20 Ton 44 HL2002 28.2 125 5.0
178 kN
30 Ton 62 HL3002 41.9 260 6.8
267 kN
50 Ton 60 HL5002 63.7 382 9.9
445 kN
100 Ton 57 HL10002 126.7 722 20.6
890 kN

Cylinder Plunger Mounting

Collapsed ([WHQGHG Outside Plunger
Bore
Model Height Height Diameter Diameter Bolt Circle Thread Depth
Diameter Thread
Number A B D E X Z
C Y
(mm) (mm) (mm) (mm) (mm) (mm)
(mm)
HL1001 88 126 44 70 38 26 M4 8
HL2002 99 144 60 92 51 40 M4 8
HL3002 117 179 73 102 64 40 M5 8
HL5002 122 182 90 124 70 40 M5 8
HL10002 141 198 127 165 90 56 M8 3

16
 LRZ PrRÀOe &yOinderV &RmER .it
Press truck wheel from nave with the
mini-press. Fits between the chassis Low Clearance Lifting
and wheel.
• Compact design for use in con¿ned spaces
• Ideal for pushing applications
• Plunger wiper helps seal out dirt and contamination
• Return spring ensures a quick retraction and ex-
tends the life of the spring

Cylinders
• Industrial hard chrome plated plunger helps prevent
scratching and corrosion
• Includes stackable 1Ǝ, 2Ǝ, and 3Ǝ aluminum adapt-
ers that conveniently snap into the base of the
plunger
• Includes high Àow CH38F coupler and dust cap
• Convenient storage case

HL Series
Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

Related Product: Hoses

We offer a variety of
hoses, ¿ttings, lengths
and materials.
pg 67

High-Flow Couplers
76 mm HL-1001-D High-Flow Coupler: CH38F is
Adapter included on all models except
where speci¿ed.
25 mm 51 mm
Adapter Adapter 38 mm
Saddle

Cylinder ([WHQGHG Internal Cylinder

Collapsed Plunger
Cylinder Model Stroke Effective Height Pressure at Housing Weight
Height Diameter
Capacity Number (mm) Area w/o adapter Capacity Diameter (kg)
(mm) (mm)
(cm2) (mm) (BAR) (mm)
10 Ton HL-1001-D 38 15.16 88 126 0.59 70 38 4.5
89 kN

BROt2n TiOt 6addOeV

Bolt-On tilt saddles are designed speci¿cally for use with the HL Series Low Pro¿le Cylinders and Low
SDTL50 Pro¿le Cylinder Kit. These saddles provide a max. 5° tilt for uneven loads.
SDTL100
Model Number Height (mm) Description
SDTL10 21 HL1001 Cylinder Kit
SDTL50 29 HL2002/HL3002/HL 5002 Cylinder
SDTL100 35 HL10002 Cylinder
SDTL10

17
 )Oat BRdy &yOinderV
Extremely Low Lifting

• Extremely low collapsed height for applications

with minimal clearance at the lift point
• Maximum working pressure 10,000 psi / 700 bar HF15006
• HF0503 and HF0503B include a 3/8Ǝ regular
Àow coupler CR38F

HF0503

HF10006

HF Series

E
D2 X

3/8” - 18NPTF
B
A

G
L M
C
D1
HF5006 in the collapsed position ready to lift a load
with a PA1500 foot pump.

Cylinder
Oil
Cylinder Stroke Model Effective Weight
Capacity
Capacity (mm) Number Area (kg)
(cc)
(cm2)
5 Ton / 44 kN 16 HF0500 7.1 11 0.9
5 Ton / 44 kN 6 HF0503* 7.1 4 0.6
10 Ton / 89 kN 11 HF1005 15.2 17 1.5
20 Ton / 178 kN 11 HF2005 28.3 31 2.7
30 Ton / 267 kN 13 HF3005 41.9 54 4.4
50 Ton / 445 kN 16 HF5006 63.6 102 6.8
75 Ton / 667 kN 16 HF7506 103.9 166 11.5
100 Ton / 890 kN 16 HF10006 126.7 203 14.3
150 Ton / 1495 kN 16 HF15006 197.9 316 24.2

Cylinder Outside Base Plunger

Collapsed ([WHQGHG Plunger Plunger Hole Hole Counter
Bore Dia. to Inlet to Mtg. Counter
Model Height Height Dia. to Base Pitch Dia. Bore
Dia. '[' Port Hole Bore Dia.
Number A B E L X Y Depth
C D G M (mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
(mm) (mm) (mm) (mm)
HF0500 41 57 30 60x40 25 19 20 22 28 5 10 6
HF0503* 32 38 30 61x41 25 18 20 22 28 5 8 4
HF1005 43 54 44 84x56 38 20 28 34 37 7 11 8
HF2005 51 62 60 102x76 51 19 39 40 49 10 15 10
HF3005 59 72 73 117x97 64 20 48 44 52 10 16 11
HF5006 67 83 90 114x114 70 20 57 54 67 11 19 13
HF7506 80 96 115 165x140 90 20 70 67 76 13 21 14
HF10006 86 102 127 178x152 90 20 76 75 76 13 21 14
HF15006 100 116 159 216x191 118 24 3.75 95 117 13 21 14

+)LV¿WWHGZLWKWKH&5)FRXSOHULQVWHDGRI&+)

18
 )Oat BRdy &yOinder .itV
HF Series - Kits

• Various height stackable magnetic

adapters eliminate dangerous
cribbing
• Convenient carrying case
• Magnetic adapters are stackable

Cylinders
• U.S. Patent No.7,237,762 B2

Safety Practices
Good industry practice
recommends not exceeding
HF Series 80% of maximum rated
capacities of all our products.

Magnet Shim

High-Flow Couplers
High-Flow Coupler: CH38F is
included on all models except
where speci¿ed

F B
Magnet Shim

G
E
A

D
C

Cylinder Oil Collapsed Adapter Dimensions

Stroke Model Cylinder Weight
Capacity Capacity Height
(mm) Number Model (kg) A B C D E F G
(cc) (mm)
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
4 41 65 59 12 28 6

5 Ton 11 41 65 59 12 28 6
6 HF0503B** HF0503 4 32 2.5
44 kN 23 41 65 59 12 28 6
30 41 65 59 12 28 6
10 56 90 82 21 37 7
10 Ton 11 HF1005B HF1005 17 43 4.2 20 56 90 82 - - -
89 kN
40 56 90 82 - - -
10 76 108 100 27 49 10
20 Ton 11 HF2005B HF2005 31 51 6.8 20 76 108 100 - - -
178 kN
40 76 108 100 - - -
10 95 121 113 34 52 10
30 Ton 13 HF3005B HF3005 54 59 9.5 20 95 121 113 - - -
267 kN
40 95 121 113 - - -
10 114 150 141 41 67 11
50 Ton 16 HF5006B HF5006 102 67 14.7 20 114 150 141 - - -
445 kN
40 114 150 141 - - -

+)%LV¿WWHGZLWKWKHFRXSOHU&5)

19
 +ROORZ POXnger &yOinderV
HC Series

Capacity:
12-100 Tons

Stroke:
8 - 155 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR
HC6006T
0LQ0D[+HLJKW
HC1201T 60 - 486 mm

Here is a HC6006T in a pulling application. HC3002T

• Ideal for pulling and pushing applications

• Heavy duty compression spring
• Dual wipers help prevent contamination
• Collar thread protector
• High Àow coupler with dust cap
• XT cylinders do not have internal plunger threads
• 60 and 100 Ton models are equipped with carrying handles

Cylinder Collapsed ([WHQGHG Bore

Oil O.D.
Cylinder Stroke Model Effective Weight Height Height Dia.
Capacity D
Capacity (mm) Number Area (kg) A B C
(cc) (mm)
(cm2) (mm) (mm) (mm)

8 HC1201T 18.8 15 1.5 60 68 49 70

12 Ton 41 HC1202 18.8 77 2.8 120 162 49 70

107 kN 41 HC1202XT 18.8 77 2.8 120 162 49 70
76 HC1203XT 18.8 143 3.9 184 260 49 70

20 Ton 51 HC2002T 31.6 161 7.2 162 213 64 100

178 kN 154 HC2006T 31.6 487 13.4 306 460 64 100

30 Ton 64 HC3002T 40.8 261 10.4 179 243 72 114

267 Ton 155 HC3006T 40.8 634 19.5 331 486 72 114

60 Ton 76 HC6003T* 84.2 641 29.8 248 324 104 159

534 kN 152 HC6006T* 84.2 1282 36.8 324 477 104 159
100 Ton 76 HC10003T* 142.8 1087 51.4 254 330 135 213
890 kN

&\OLQGHULV¿WWHGZLWKFDUU\LQJKDQGOHV

20
 F

Cylinders
HC Series
H

L
B
Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

Combo Kits
Most cylinders are available
3/8”-18NPTF
in easy to order kits: cylinder,
gauge, couplers, hose
pg 60
and pump.

Z G

E Related Product: Gauges

Reduce the risk of overloading
C your product by using a gauge.
A variety of graduations and
D types to suit any need. pg 65

Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
X E pg102
Always be prepared.

High-Flow Couplers
High-Flow Coupler: CH38F is
included on all models except
where speci¿ed.

Plunger Collar Thread Base Mounting Hole

Internal Base to
Bolt Thread
Model I.D. O.D. Internal Thread Length Inlet Port
Diameter Circle Thread Depth
Number E F Thread Length L G
H X Y Z
(mm) (mm) J K (mm) (mm)
(mm) (mm)
(mm)
HC1201T* 20 35 ¾Ǝ-16UN 16 2¾Ǝ-16N 46 14 51 5/16Ǝ-18UNC 9
HC1202* 20 35 ¾Ǝ-16UN 16 2¾Ǝ-16N 46 15 51 5/16Ǝ-18UNC 9
HC1202XT* 20 35 - - 2¾Ǝ-16N 46 15 51 5/16Ǝ-18UNC 9
HC1203XT 20 35 - - 2¾Ǝ-16N 46 19 51 5/16Ǝ-18UNC 9
HC2002T 27 55 1-9/16Ǝ-16UN 19 3ǬƎ-12N 38 19 83 ǪƎ-16UNC 9
HC2006T 27 55 1-9/16Ǝ-16UN 19 3ǬƎ-12N 38 19 83 ǪƎ-16UNC 9
HC3002T 33 63 1-13/16Ǝ-16UN 22 4½Ǝ-12N 42 23 92 ǪƎ-16UNC 14
HC3006T 33 63 1-13/16Ǝ-16UN 22 4½Ǝ-12N 42 23 92 ǪƎ-16UNC 14
HC6003T** 54 93 2¾Ǝ-16UN 19 6¼Ǝ-12N 49 27 130 ½Ǝ-13UNC 14
HC6006T** 54 93 2¾Ǝ-16UN 19 6¼Ǝ-12N 49 27 130 ½Ǝ-13UNC 14
HC10003T** 79 125 4Ǝ-16UN 25 8ǪƎ-12N 60 27 178 ǫƎ-11UNC 19

&\OLQGHULV¿WWHGZLWKD&5=)UHJXODUÀRZFRXSOHU
&\OLQGHULV¿WWHGZLWKFDUU\LQJKDQGOHV

21
 LRFN 1Xt &yOinderV
HLN Series - Heavy Lifting w/
Mechanical Lock Nut
HLN15006

Capacity:
50 - 300 Tons

Stroke:
50 - 300 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR

0LQ0D[+HLJKW
HLN5504
165 - 845 mm

HLN10012
HLN10002
• Single acting cylinder with
mechanical safety lock nut
• Designed to support loads without Cylinder
Oil
hydraulic pressure Cylinder Stroke Model Effective Weight
Capacity
• OverÀow port prevents cylinders Capacity (mm) Number Area (kg)
(cc)
from over travel (cm2)
• Load return
50 HLN5502 70.9 355 15.4
• Solid steel cylinder body
100 HLN5504 70.9 709 20.4
• Electroless nickel plated plunger to
150 HLN5506 70.9 1064 24.9
resist corrosion and rust 55 Ton
489 kN 200 HLN5508 70.9 1418 29.9
• Maximum working pressure:
10,000 psi / 700 bar 250 HLN5510 70.9 1773 34.9
300 HLN5512 70.9 2127 39.5

Optional Tilt Saddles 50 HLN10002 132.7 664 30.4

100 HLN10004 132.7 1327 39.0
SDT55 ĺ HLN55, HLN100 Cylinders
150 HLN10006 132.7 1991 47.2
100 Ton
SDT200 ĺ HLN150, HLN200 Cylinders 890 kN 200 HLN10008 132.7 2654 55.8
SDT250 ĺ HLN250 250 HLN10010 132.7 3318 64.0
300 HLN10012 132.7 3981 72.6
SDT300 ĺ HLN300
50 HLN15002 201 1006 52.6

Saddles tilt to a 5° max to 100 HLN15004 201 2012 65.8

adjust to the load. 150 HLN15006 201 3018 78.9
150 Ton
1334 kN 200 HLN15008 201 4019 91.6
pg 41
250 HLN15010 201 5025 104.8
(42) HLN5508 lock nut cylinders lifting the Jordan 300 HLN15012 201 6031 117.5
Bridge in Chesapeake, VA.
50 HLN20002 264.5 1322 82.1
100 HLN20004 264.5 2645 98.9

200 Ton 150 HLN20006 264.5 3966 116.1

1779 kN 200 HLN20008 264.5 5293 132.9
250 HLN20010 264.5 6612 150.1
300 HLN20012 264.5 7934 166.9
50 HLN25002 363.1 1815 114.8
250 Ton 150 HLN25006 363.1 5446 161.5
2224 kN
300 HLN25012 363.1 10891 231.3
50 HLN30002 454.3 2271 171.9
300 Ton 150 HLN30006 454.3 6814 231.3
2669 kN
300 HLN30012 454.3 13628 320.2

22
 G2
F G1

Cylinders
B
HLN Series

A 3/8"-18NPTF Safety Color Band

BVA Lock nut cylinders are
equipped with a yellow safety band.
Do not extend the ram beyond this
point as it may result in a loss of
hydraulic oil and damage to the
cylinder and/or load.

Safety Practices
C Good industry practice
recommends not exceeding
80% of maximum rated
D capacities of all our products.

Cylinder Depth of Saddle

Collapsed ([WHQGHG Outside Saddle Lock Nut Base to
Bore Plunger Protrusion
Model Height Height Diameter Diameter Length Inlet Port
Diameter Hole From Plunger
Number A B D F H I
C G1 G2
(mm) (mm) (mm) (mm) (mm) (mm)
(mm (mm) (mm)
HLN5502 165 213 94 124 71 13 2 36 28
HLN5504 213 315 94 124 71 13 2 36 28
HLN5506 264 414 94 124 71 13 2 36 28
HLN5508 315 513 94 124 71 13 2 36 28
HLN5510 363 615 94 124 71 13 2 36 28
HLN5512 414 714 94 124 71 13 2 36 28
HLN10002 188 236 130 165 71 13 2 46 28
HLN10004 236 338 130 165 71 13 2 46 28
HLN10006 287 437 130 165 71 13 2 46 28
HLN10008 338 536 130 165 71 13 2 46 28
HLN10010 386 638 130 165 71 13 2 46 28
HLN10012 437 737 130 165 71 13 2 46 28
HLN15002 209 259 160 205 130 25 2 44 39
HLN15004 259 359 160 205 130 25 2 44 39
HLN15006 309 459 160 205 130 25 2 44 39
HLN15008 359 559 160 205 130 25 2 44 39
HLN15010 409 659 160 205 130 25 2 44 39
HLN15012 459 759 160 205 130 25 2 44 39
HLN20002 243 292 183 235 130 25 2 50 50
HLN20004 293 393 183 235 130 25 2 50 50
HLN20006 343 495 183 235 130 25 2 50 50
HLN20008 394 594 183 235 130 25 2 50 50
HLN20010 442 693 183 235 130 25 2 50 50
HLN20012 493 793 183 235 130 25 2 50 50
HLN25002 249 299 215 275 150 25 2 56 50
HLN25006 349 499 215 275 150 25 2 56 50
HLN25012 499 799 215 275 150 25 2 56 50
HLN30002 295 345 241 310 139 25 5 60 59
HLN30006 395 545 241 310 139 25 5 60 59
HLN30012 545 845 241 310 139 25 5 60 59

23
 LRZ PrRÀOe LRFN 1Xt &yOinderV
Low Clearance Lifting w/ Mechanical Lock Nut

• Single acting cylinder with mechanical safety lock nut

• Designed to support loads without hydraulic pressure
• Low pro¿le for con¿ned spaces
• 5° tilting saddle is standard
• Maximum working pressure: 10,000 psi/700 bar
• Equipped with CH38F high Àow coupler
• Load Return

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

Safety Color Band

HLNF Series BVA Lock nut cylinders are
equipped with a yellow safety band.
Do not extend the ram beyond this
point as it may result in a loss of
E hydraulic oil and damage to the
cylinder and/or load.
F

5°

G Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
H Always be prepared. pg102

C
D

Cylinder J
Oil
Cylinder Stroke Model Effective Weight
Capacity
Capacity (mm) Number Area (kg)
(cc)
(cm2)
60 Ton / 534 kN 50 HLNF6002 86.6 433 14.2
100 Ton / 890 kN 50 HLNF10002 144.9 725 24.5
160 Ton / 1423 kN 45 HLNF16002 229.1 1031 41.3
200 Ton / 1779 kN 45 HLNF20002 283.6 1276 53.8

250 Ton / 2224 kN 45 HLNF25002 363.1 1634 70.1

K

Cylinder Saddle Base to

Collapsed ([WHQGHG Outside Plunger Saddle Lock Nut Coupler Eyelet to
Bore Protrusion Inlet
Model Height Height Dia. Outside Dia. Length to Eylet Eyelet
Dia. From Plunger Port
Number A B D Thread F H J K
C G I
(mm) (mm) (mm) E (mm) (mm) (mm) (mm)
(mm) (mm) (mm)
HLNF6002 125 175 105 140 TW105-4N 82 6 28 19 248 188
HLNF10002 137 187 136 175 TW135-4N 110 8 31 21 278 213
HLNF16002 148 193 171 220 TW170-4N 148 9 40 27 316 244
HLNF20002 155 200 190 245 TW190-4N 160 10 43 30 338 262
HLNF25002 159 204 215 275 TW215-4N 185 11 44 32 363 283

24
Threaded &yOinderV
HT Series

• Ideal for frame pulling machines

• Threaded plunger and base
• Single acting cylinders with spring return
• Removable threaded Plunger adapter for attaching
accessories to plunger end and base

Cylinders
• Maximum working pressure: 10,000 psi / 700 bar

Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

Combo Kits
Most cylinders are available
in easy to order kits: cylinder,
gauge, couplers, hose
pg 60
and pump.

HT Series

Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
G
methods of operation.
pg102
Always be prepared.

3/8" - 18NPTF L
V
High-Flow Couplers
High-Flow Coupler: CH38F is
included on all models except
where speci¿ed. D E

S
T K
A

Cylinder Collapsed ([WHQGHG

Oil
Cylinder Stroke Model Effective Height Height Weight
Capacity
Capacity (mm) Number Area A B (kg)
(cc)
(cm2) (mm) (mm)
10 Ton 151 HT1006 14.5 218 291 442 4.8
89 kN 253 HT1010 14.5 365 393 646 6.4
20 Ton
131 HT2005 33.2 421 299 430 10.0
178 kN

Collar
Outside Plunger Base to Saddle
Thread Base Plunger
Model Dia. Dia. Inlet Port Collar Height
Length Threads Threads
Number D E G K S
L T V
(mm) (mm) (mm) (mm)
(mm)
HT1006 57 38 42 2.25”-14UN 29 24 1.25” -11.5 NPSM 1.25” -11.5 NPSM
HT1010 57 38 42 2.25”-14UN 29 24 1.25” -11.5 NPSM 1.25” -11.5 NPSM
HT2005 85 57 47 3.31”-12UN 50 36 2” -11.5 NPTF 2” -11.5 NPSM

25
 PXOO &yOinderV
HP Series - High-Tonnage Pulling

• High strength steel construction

• One piece high grade alloy bearing for side load
protection and longer life
• Polyurethane cup seal provides optimum performance
• External plunger threads and Internal base threads
• Used for pulling and tensioning
• Maximum working pressure: 10,000 psi / 700 bar
• Spring extend return

HP Series

H
F CP02, CP05 & CP10 CP02
35 mm 40 mm

P The CP02/CP05/CP10*
is a male/female set. This

70 mm
40 mm
20 mm
clevis is designed to aid in 32 mm
E 16 mm

R8
pulling applications with all
the HP series cylinders. M16X1.5
22 mm
3/8”-18NPTF
55 mm
85 mm
3/8"-18NPTF L
G B
M30X2 CP05
681 mm

45 mm 48 mm

M28X1.5
A 83 mm

20 mm
48 mm
530 mm

R8
85 mm 40 mm

23 mm
55 mm 25 mm
70 mm
100 mm
C

CP10 160 mm
M30X2
95 mm 65 mm
M30x2
Z
71 mm

A 35 mm 75 mm

D 30 mm

Cylinder Top to Collar

Cylinder Collapsed ([WHQGHG Outside
Oil Bore Inlet
Cylinder Stroke Model Effective Height Height Dia. Thread
Capacity Dia. Port
Capacity (mm) Number Area A B D Thread Length
(cc) C G
(cm2) (mm) (mm) (mm) H L
(mm) (mm)
(mm)
2.5 Ton / 127 HP0205 3.6 46 268 395 48 29 42 1½Ý-16UN 25
22 kN
5 Ton / 44 141 HP0505 7.4 104 303 444 57 43 38 2¼Ý-14UN 25
kN
10 Ton / 151 HP1006 15.7 237 299 450 85 55 38 M85x2 25
100 kN

Adapter Plunger Base Mounting Hole

Thread
Model Thread Length Dia. Thread Depth Weight Optional
Length Thread
Number F P E Q Z (kg) Clevis
K Y
(mm) (mm) (mm) (mm) (mm)
(mm)
HP0205 ¾Ý-14NPTF 29 19 19 M16 x 1.5 ¾Ý-14NPTF 18 2.9 CP02
HP0505 1¼Ý-11.5NPTF 32 30 24 M28 x 1.5 1¼Ý-11.5NPTF 24 4.2 CP05
HP1006* - - 32 26 M30 x 2 M30x2 25 9.5 CP10

26
 PreFiViRn 'RXEOe AFting &yOinderV
HPD Series - High-Cycle Fixtured Application

A
L I
M

Cylinders
Q
P
H G

D
E C

F
N
K 3/8"-18NPTF J

HPD Series
*Note: Precision double acting cylinders do not come with couplers.

• Provides hydraulic power for both extend and retract

• Designed for high cycle production applications Related Product: Hoses
• High strength steel construction from gun drilled solid bar We offer a variety of
hoses, ¿ttings, lengths
• Plunger wiper seals keep dirt and contamination out and materials.
pg 67
• Clevis eye attachments are available
• Maximum working pressure: 10,000 psi / 700 bar

Collapsed ([WHQGHG Cylinder Outside

Push Pull
Cylinder Model Height Height Bore Dia. Dia.
Effective Area Effective Area
Capacity Number A B C D
(cm2) (cm2)
(mm) (mm) (mm) (mm)

9 Ton HPD0906 11.4 6.5 350 505 38 64

80 kN HPD0910 11.4 6.5 452 709 38 64

16 Ton HPD1606 20.3 10.1 389 548 51 76

142 kN HPD1610 20.3 10.1 490 750 51 76

Plunger Collar
Base to Top to
Int. Base
Thread Inlet Return Thread
Model Dia. Protrusion Length Int. Base Thread Weight
Thread Length Port Port Thread Length
Number E F L Thread Length (kg)
G H J K M N
(mm) (mm) (mm) P Q
(mm) (mm) (mm) (mm)
(mm)
HPD0906 25 25 ¾Ǝ-16N 19 38 56 38 2Ǝ-12N 15 1-11/16Ǝ-18N 35 6.6
HPD0910 25 25 ¾Ǝ-16N 19 38 56 38 2Ǝ-12N 15 1-11/16Ǝ-18N 35 8.4
HPD1606 36 29 1ǩƎ-12N 25 54 73 54 2ǫƎ-16N 25 2-3/16Ǝ-16N 41 10.0
HPD1606 36 29 1ǩƎ-12N 25 54 73 54 2ǫƎ-16N 25 2-3/16Ǝ-16N 41 12.8

A D
&(' 6erieV
B
By attaching this clevis eye to a HPD cylinder, you gain the ability for pull
applications. For use with the 9 or 16 ton HPD cylinders only.
E
Dimensions (mm)
Model Number A B C D E F G
F
CED09 25 23 1-11/16”-16N 19 33 24 ¾”-16N
C G CED16 32 28 2-3/16”-16N 25 48 30 1ǩ”12N

27
 'RXEOe AFting &yOinderV
HD Series - General Purpose

Capacity:
10 - 100 Tons

Stroke:
155 - 461 mm

Pressure:
700 BAR

0LQ0D[+HLJKW
331 - 1269 mm

HD10006 HD3008

• Plunger wiper seals out dirt and contamination

• High strength steel construction from gun
drilled solid bar
• High Àow 3/8Ǝ NPTF female couplers
• One piece high grade alloy bearing for side load protection
and long life
• Ideal for pushing and pulling
• Maximum working pressure: 10,000 psi / 700 bar
• Threaded cylinders, removable saddle, thicker cylinder
walls
• Retract under hydraulic power for faster operation

Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

HD cylinders can be
used in pushing and
pulling applications.
In this photo, we
see a HD2506 HD
cylinder set up for
a pull application
using a Plunger
Clevis cylinder
accessory

28
 HD Series

Cylinders
HDU Series – Aluminum Cylinders
Aluminum cylinders make a
great lightweight alternative
being up to 60% lighter
than comparable
steel models. pg 36

Cylinder Accessories
See the assortment
of accessories designed
With a variety of tonnage and to work with our products.
sizes, you can apply our cylin- pg 40
ders on a large variety
389 mm of applications. Custom
tonnages and stroke lengths
are available upon request.
Combo Kits
Most cylinders are available
HD3008 in easy to order kits: Cylinder,
Gauge, Couplers, Hose
pg 60
and Pump.

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

Quick Selection Guide Safety Instructions

Visit our DO¶S and DON¶TS
section to review the best
Oil Capacity methods of operation.
Cylinder Collapsed pg102
Always be prepared.
Stroke Model Weight
Capacity Height
(mm) Number Push Pull (kg)
(mm)
(cc) (cc)
High-Flow Couplers
10 Ton 255 HD1010 409 367 122 12.1 High-Flow Coupler: CH38F is
89 kN included on all models except
304 HD1012 458 438 146 13.6 where speci¿ed.

30 Ton 207 HD3008 389 867 426 19.5

267 kN 368 HD3014 550 1542 758 27.5
157 HD5506* 331 1113 323 32.0
55 Ton Relief Valve
335 HD5513* 509 2375 690 47.2
489 kN All double acting cylinders are equipped with a
511 HD5520* 733 3623 1053 66.3 pressure relief valve located
155 HD7506* 348 1608 511 42.5 next to the retract port.
75 Ton These pressure relief valves
667 kN 333 HD7513* 526 3457 1099 62.1 help prevent cylinder over
pressuri]ation on the return
167 HD10006* 357 2216 1032 62.9 port side of the cylinder.
257 HD10010* 449 3413 1591 76.7
100 Ton
890 kN 333 HD10013* 524 4419 2058 87.8

461 HD10018* 687 6117 2849 112.6

* Are equipped with carrying handles.

29
 'RXEOe AFting &yOinderV
HD Series - General Purpose

Cylinder Accessories
See the assortment
of accessories designed
to work with our products.
pg 40

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

Combo Kits
Most cylinders are available
in easy to order kits: Cylinder,
Gauge, Couplers, Hose
pg 60
and Pump.
HD10006

HD10018
Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
pg102
Always be prepared.

HD3008

0D[LPXP Cylinder
Oil Capacity Collapsed ([WHQGHG Cylinder
Cylinder Cylinder Capacity Effective Area
Stroke Model Weight Height Height Bore Dia.
Capacity
(mm) Number Push Pull Push Pull Push Pull (kg) A B C
(ton) (ton) (cm2) (cm2) (cc) (cc) (mm) (mm) (mm)

10 Ton 255 HD1010 11.4 3.8 14.5 4.8 367 122 12.1 409 665 43
89 kN 304 HD1012 11.4 3.8 14.5 4.8 438 146 13.6 458 762 43

30 Ton 207 HD3008 32.9 16.2 41.9 20.6 867 426 19.5 389 596 73
267 kN 368 HD3014 32.9 16.2 41.9 20.6 1542 758 27.5 550 918 73
157 HD5506* 55.7 16.2 70.9 20.6 1113 323 32.0 331 488 95
55 Ton 335 HD5513* 55.7 16.2 70.9 20.6 2375 690 47.2 509 844 95
489 kN
511 HD5520* 55.7 16.2 70.9 20.6 3623 1053 66.3 733 1269 95

75 Ton 155 HD7506* 81.7 25.9 103.8 33 1608 511 42.5 348 503 115
667 kN 333 HD7513* 81.7 25.9 103.8 33 3457 1099 62.1 526 859 115
167 HD10006* 104.4 48.6 132.7 61.8 2216 1032 62.9 357 524 130

100 Ton 257 HD10010* 104.4 48.6 132.7 61.8 3413 1591 76.7 449 706 130
890 kN 333 HD10013* 104.4 48.6 132.7 61.8 4419 2058 87.8 524 857 130
461 HD10018* 104.4 48.6 132.7 61.8 6117 2849 112.6 687 1148 130

* Are equipped with carrying handles.

30
 F
Y

HD Series

Cylinders
J X

Safety Practices
Good industry practice
M recommends not exceeding
H 80% of maximum rated
B
capacities of all our products.

Relief Valve
A All double acting cylinders are equipped with a
3/8"-18NPTF pressure relief valve located
C next to the retract port.
These pressure relief valves
help prevent cylinder over
pressuri]ation on the return
port side of the cylinder.

Z G
High-Flow Couplers
High-Flow Coupler: CH38F is
D
included on all models except
where speci¿ed.

Base to Top to Plunger Collar Base Mounting Hole

Outside Plunger Saddle Plunger
Inlet Return Thread Collar Thread
Model Dia. Dia. Dia. Internal Bolt Thread
Port Port Length Thread Length
Number D E F Thread Circle Thread Depth
G H K L M
(mm) (mm) (mm) J X Y Z
(mm) (mm) (mm) (mm)
(mm) (mm)
HD1010 73 35 35 36 53 1”-8UNC 25 2¼”-14UN 26 33 / 16”-18UNC
5
15

HD1012 73 35 35 36 53 1”-8UNC 25 2¼”-14UN 26 33 / 16”-18UNC

5
15
HD3008 101 54 50 42 74 1½”-16UN 25 35/16”-12UN 49 56 ½”-13UNC 18
HD3014 101 54 50 42 74 1½”-16UN 25 35/16”-12UN 49 56 ½”-13UNC 18
HD5506* 127 80 70 29 73 1”-12UNF 25 5”-12UN 44 94 ½”-13UNC 18
HD5513* 127 80 70 29 73 1”-12UNF 25 5”-12UN 44 94 ½”-13UNC 18
HD5520* 127 80 70 29 73 1”-12UNF 25 5”-12UN 44 94 ½”-13UNC 18
HD7506* 146 95 70 30 71 1”-12UNF 38 5¾”-12UN 38 102 ¾”-10UNC 23
HD7513* 146 95 70 30 71 1”-12UNF 38 5¾”-12UN 38 102 ¾”-10UNC 23
HD10006* 177 95 75 31 75 1¾”-12UN 35 6Ǭ”-12N 50 139 ¾”-10UNC 25
HD10010* 177 95 75 31 75 1¾”-12UN 38 6Ǭ”-12N 51 140 ¾”-10UNC 25
HD10013* 177 95 75 31 75 1¾”-12UN 35 6Ǭ”-12UN 50 139 ¾”-10UNC 25
HD10018* 177 95 75 38 75 1¾”-12UN 35 6Ǭ”-12UN 50 139 ¾”-10UNC 25

* Are equipped with carrying handles.

31
 +igh TRnnage 'RXEOe AFting &yOinderV
HDG Series - Heavy Lifting

Capacity:
100 - 1000 Tons

HDG20008 Stroke:
50 - 300 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR

HDG30006
0LQ0D[+HLJKW
182 - 1114 mm
HDG10008
HDG10002
HDG15006

Flow Control Valves

Control the speed of your
cylinder by adding a Àow • Cylinders are burnish rolled creating a smoother
control valve. ¿nish than honing
pg 62
• Industrial hard chrome plated plunger prevents
scratching and corrosion
• Base mounting holes standard on all models
Related Product: Hoses • Plunger wiper seals out dirt and contamination
We offer a variety of • High strength steel construction from gun
hoses, ¿ttings, lengths
and materials.
drilled solid bar
pg 67 • High Àow 3/8Ǝ NPTF couplers
• Maximum working pressure: 10,000 psi / 700 bar
• Custom si]es are available upon request
Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
pg102
Always be prepared.

Gas/Diesel Engine Pumps Electric Motor Pumps

These HDG cylinders pair up well with a Gas or Diesel Engine pump. We These HDG cylinders pair up well with Electric Motor pumps. We offer a
offer a variety of different Àow rates, motor si]es and reservoir si]es on our variety of different Àow rates and motor si]es on our electric motor pumps.
gas/diesel engine pumps. Contact your local BVA dealer for more details. Contact your local BVA dealer for more details.

• Gas engine pump will provide 700 BAR. • Meets OSHA regulations for sound
hydraulic force at remote locations 80dBA
• Industrial grade 5.5 hp. 4.1 kN Honda • Two speed pump designed for rapid
gas engine or 4.6 hp. 3.5 kN HATZ cylinder advance
diesel engine. • Internal ¿lter screens contamination
• Ideal for applications where electricity to prevent pump damage
isn¶t easily accessible. • All units are wired as 240 VAC 50 H]
• Two speed pump designed for rapid Optional wiring: 115VAC 50H]
cylinder advance • 100% Duty Cycle TEFC motors
• Gas pump features a sturdy protective • All hand pendants are wired at 24VAC
roll cage for use in the toughest for safety
environments • Full load starting capability
• Optional electric start with
Diesel Engine

32
 Quick Reference Guide

Cylinder Collapsed Oil

Stroke Model Weight

Cylinders
Capacity Height Capacity
(mm) Number (kg)
(mm) (cc)

HDG Series
50 HDG10002 182 664 27.7

100 HDG10004 232 1327 33.6

150 HDG10006 282 1991 39.5

Safety Practices
100 Ton Good industry practice
890 kN 200 HDG10008 332 2655 45.4 recommends not exceeding
80% of maximum rated
250 HDG10010 382 3318 51.7 capacities of all our products.

300 HDG10012 432 3982 57.6

50 HDG15002 196 981 46.3

Optional Tilt-Saddles
100 HDG15004 246 1963 55.3
Saddles tilt to a 5% maximum
150 HDG15006 296 2978 64.4 to adjust to the load. View our
150 Ton
cylinder accessories page to
1334 kN 200 HDG15008 346 3926 73.5 ¿gure out what saddle best
¿ts these cylinders. pg 41
250 HDG15010 396 4907 82.1

300 HDG15012 446 5889 91.6

50 HDG20002 216 1322 54.9

Related Product: Gauges
150 HDG20006 316 3989 91.2 Reduce the risk of overloading
200 Ton your product by using a gauge.
1779 kN 200 HDG20008 366 5289 109.8 A variety of graduations and
types to suit any need. pg 65
300 HDG20012 466 7977 146.1

50 HDG30002 312 2281 184.2

300 Ton* 150 HDG30006 412 6843 231.8
2669 kN High-Flow Couplers
300 HDG30012 562 13685 303.0 High-Flow Coupler: CH38F is
included on all models except
50 HDG40002 374 2800 269.9 where speci¿ed.
400 Ton* 150 HDG40006 474 8399 330.2
3559 kN
305 HDG40012 625 17077 420.9

50 HDG50002 419 3653 401.0 Relief Valve

500 Ton* 150 HDG50006 519 10959 479.9 All double acting cylinders are equipped with a
4448 kN pressure relief valve located
300 HDG50012 669 21919 599.2 next to the retract port.
These pressure relief valves
50 HDG60002 429 4277 474.0 help prevent cylinder over
pressuri]ation on the return
150 HDG60006 529 12829 565.2 port side of the cylinder.
600 Ton*
5338 kN 250 HDG60010 505 23088 430.0

300 HDG60012 679 25662 700.8

50 HDG80002 474 5881 741.2

800 Ton* 150 HDG80006 574 17649 868.2
7117 kN
300 HDG80012 724 35281 1057.8

50 HDG100002 564 7329 1061.9

1000 Ton* 150 HDG100006 664 21991 1212.9
8896 kN
300 HDG100012 814 43966 1438.8

* Available on request
See next pages (pg.34-35) to view more detailed stats on High Tonnage Double Acting Cylinders.

33
 +igh TRnnage 'RXEOe AFting &yOinderV
HDG Series - Heavy Lifting

E
F

3/8"-18NPTF HDG100
C
Z HDG150 HDG200
G

Y 0D[LPXP Cylinder Oil

X Cylinder Effective Capacity
Cylinder Stroke Model Weight
D Capacity (ton) Area (cm2) (cc)
Capacity (mm) Number (kg)
Push Pull Push Pull Push Pull
50 HDG10002 102.9 47.9 132.7 61.9 664 309 27.7
Relief Valve 100 HDG10004 102.9 47.9 132.7 61.9 1327 618 33.6
All double acting cylinders are equipped with a 150 HDG10006 102.9 47.9 132.7 61.9 1991 928 39.5
pressure relief valve located 100 Ton
next to the retract port. 890 kN 200 HDG10008 102.9 47.9 132.7 61.9 2655 1237 45.4
These pressure relief valves
250 HDG10010 102.9 47.9 132.7 61.9 3318 1546 51.7
help prevent cylinder over
pressuri]ation on the return 300 HDG10012 102.9 47.9 132.7 61.9 3982 1856 57.6
port side of the cylinder.
50 HDG15002 152.2 78.5 196.3 101.3 981 506 46.3
100 HDG15004 152.2 78.5 196.3 101.3 1963 1013 55.3

150 Ton 150 HDG15006 152.2 78.5 196.3 101.3 2978 1447 64.4
Optional Tilt-Saddles 1334 kN 200 HDG15008 152.2 78.5 196.3 101.3 3926 2025 73.5
Saddles tilt to a 5% maximum 250 HDG15010 152.2 78.5 196.3 101.3 4907 2531 82.1
to adjust to the load. View our
cylinder accessories page to 300 HDG15012 152.2 78.5 196.3 101.3 5889 3038 91.6
¿gure out what saddle best
50 HDG20002 205.0 94.0 264.5 121.3 1322 606 54.9
¿ts these cylinders. pg 41
200 Ton 150 HDG20006 205.0 94.0 264.5 121.3 3989 1905 91.2
1779 kN 200 HDG20008 205.0 94.0 264.5 121.3 5289 2426 109.8
300 HDG20012 205.0 94.0 264.5 121.3 7977 3809 146.1
Safety Instructions 50 HDG30002 353.6 117.0 456.2 151.4 2281 757 184.2
Visit our DO¶S and DON¶TS 300 Ton*
section to review the best 150 HDG30006 353.6 117.0 456.2 151.4 6843 2270 231.8
2669 kN
methods of operation. 300 HDG30012 353.6 117.0 456.2 151.4 13685 4541 303.0
pg102
Always be prepared.
50 HDG40002 433.9 152.6 559.9 196.9 2800 967 269.9
400 Ton* 150 HDG40006 433.9 152.6 559.9 196.9 8399 2902 330.2
3559 kN
305 HDG40012 433.9 152.6 559.9 196.9 17077 6004 420.9
High-Flow Couplers
50 HDG50002 566.3 192.0 730.7 247.7 3653 1238 401.0
High-Flow Coupler: CH38F is
500 Ton* 150 HDG50006 566.3 192.0 730.7 247.7 10959 3713 479.9
included on all models except
4448 kN
where speci¿ed.
300 HDG50012 566.3 192.0 730.7 247.6 21919 7427 599.2
50 HDG60002 662.9 229.0 855.3 295.4 4277 1477 474.0

600 Ton* 150 HDG60006 662.9 229.0 855.3 295.4 12829 4431 565.2
5338 kN 250 HDG60010 670.9 352.9 865.7 455.3 23088 12142 430.0
300 HDG60012 662.9 229.0 855.3 295.4 25662 8862 700.8
50 HDG80002 911.6 300.0 1176 387.1 5881 1935 741.2
800 Ton* 150 HDG80006 911.6 300.0 1176 387.1 17649 5806 868.2
7117 kN
300 HDG80012 911.6 300.0 1176 387.1 35281 11611 1057.8
50 HDG100002 1136.0 420.0 1465 541.8 7329 2709 1061.9
1000 Ton* 150 HDG100006 1136.0 420.0 1465 541.8 21991 8126 1212.9
8896 kN
300 HDG100012 1136.0 420.0 1465 541.8 43966 16252 1438.8

* Available on request: no stock item

34
 Cylinders
HDG Series

Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.
HDG300 - HDG1000

Collapsed ([WHQGHG Cylinder Outside Plunger Saddle Base To Top To Base Mounting Holes
Model Height Height Bore Dia. Dia. Dia. Dia. Inlet Port Retract Port Bolt Circle Thread
Thread
Number A B C D E F G H X Depth
Size
(mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) Z (mm)
HDG10002 182 232 130 89 95 75 54 48 95 M12 22
HDG10004 232 332 130 89 95 75 54 48 95 M12 22
HDG10006 282 432 130 89 95 75 54 48 95 M12 22
HDG10008 332 532 130 89 95 75 54 48 95 M12 22
HDG10010 382 632 130 89 95 75 54 48 95 M12 22
HDG10012 432 732 130 89 95 75 54 48 95 M12 22
HDG15002 196 246 158 205 110 94 61 56 130 M12 22
HDG15004 246 346 158 205 110 94 61 56 130 M12 22
HDG15006 296 446 158 205 110 94 61 56 130 M12 22
HDG15008 346 546 158 205 110 94 61 56 130 M12 22
HDG15010 396 646 158 205 110 94 61 56 130 M12 22
HDG15012 446 746 158 205 110 94 61 56 130 M12 22
HDG20002 216 266 183 235 135 113 67 56 165 M12 20
HDG20006 316 466 184 235 135 113 67 56 165 M12 20
HDG20008 366 566 183 235 135 113 67 56 165 M12 20
HDG20012 466 766 184 235 135 113 67 56 165 M12 20
HDG30002 312 362 241 310 197 177 101 75 180 M16 36
HDG30006 412 562 241 310 197 177 101 75 180 M16 36
HDG30012 562 862 241 310 197 177 101 75 180 M16 36
HDG40002 374 424 267 350 216 196 114 105 205 M16 36
HDG40006 474 625 267 350 216 196 114 105 205 M16 36
HDG40012 625 925 267 350 216 196 114 105 205 M16 36
HDG50002 419 469 305 400 248 228 114 135 250 M24 38
HDG50006 519 669 305 400 248 228 114 135 250 M24 38
HDG50012 669 969 305 400 248 228 114 135 250 M24 38
HDG60002 429 479 330 430 267 247 114 135 275 M24 38
HDG60006 529 679 330 430 267 247 114 135 275 M24 38
HDG60010 457 724 332 433 229 200 114 135 275 M24 38
HDG60012 679 979 330 430 267 247 114 135 275 M24 38
HDG80002 474 524 387 505 317 297 149 135 330 M24 38
HDG80006 574 724 387 505 317 297 149 135 330 M24 38
HDG80012 724 1024 387 505 317 297 149 135 330 M24 38
HDG100002 564 614 432 560 343 323 174 170 375 M24 38
HDG100006 664 814 432 560 343 323 174 170 375 M24 38
HDG100012 814 1114 432 560 343 323 174 170 375 M24 38

35
 AOXminXm 'RXEOe AFting &yOinderV
HDU Series - General Purpose, Lightweight

• Lightweight aluminum alloy construction

• Up to 60% lighter than comparable tonnage steel cylinders
• Convenient carry handle Capacity:
• Hard anodi]ed aluminum plunger provides extra protection 20 - 30 Tons
against corrosion and wear
• Steel protective plate on cylinder base Stroke:
• Maximum working pressure: 700 bar
50 - 150 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR

0LQ0D[+HLJKW
189 - 451 mm

HDU2006

HDU3006

0D[LPXP&\OLQGHU Cylinder Effective Oil Capacity

Capacity (ton) Area (cm2) (cc)
Cylinder Stroke Model Weight
Capacity (mm) Number (kg)
Push Pull Push Pull Push Pull

50 HDU2002 20 13 41.9 16.1 156 93 5.7

20 Ton
100 HDU2004 20 13 41.9 16.1 312 186 6.9
178 kN
150 HDU2006 20 13 38.7 16.1 468 279 8.0
50 HDU3002 30 17 66.5 17.4 221 123 7.6
30 Ton
100 HDU3004 30 17 66.5 17.4 442 240 9.0
267 kN
150 HDU3006 30 17 66.5 17.4 663 368 10.4

* The base of the cylinders contain a Steel plate with mounting holes and is designed to protect the cylinder
from damage and should NOT be used in ¿xturing applications and ONLY be used to attach a larger
base mounting plate for lifting stability. They are NOT designed to withstand the full rating of the cylinder.

36
 Cylinders
HDU Series

E Related Product: Gauges

Reduce the risk of overloading
F your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
H pg102
Always be prepared.

B Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
A capacities of all our products.

High-Flow Couplers
High-Flow Coupler: CH38F is
included on all models except
where speci¿ed.

Relief Valve
C
All double acting cylinders are equipped with a
pressure relief valve located
D next to the retract port.
These pressure relief valves
help prevent cylinder over
pressuri]ation on the return
port side of the cylinder.

Cylinder
Collapsed ([WHQGHG Outside Plunger Saddle Base To Top To
Bore
Model Height Height Dia. Dia. Dia. Inlet Port Retract Port
Dia.
Number A B D E F G H
C
(mm) (mm) (mm) (mm) (mm) (mm) (mm)
(mm)
HDU2002 189 239 63 113 40 30 28 42

HDU2004 239 339 63 113 40 30 28 42

HDU2006 289 439 63 113 40 30 28 42
HDU3002 201 251 75 125 50 40 34 43
HDU3004 251 351 75 125 50 40 34 43
HDU3006 301 451 75 125 50 40 34 43

NOTE: The base of the aluminum cylinders contain a Steel plate with mounting holes and is designed to protect the
cylinder from damage and should NOT be used in ¿xturing applications and ONLY be used to attach larger
base mounting plates for lifting stability. The threads are NOT designed to withstand the full rating of the cylinder.

37
 'RXEOe AFting +ROORZ POXnger &yOinderV
HDC Series

Capacity:
30 - 150 Tons

Stroke:
38 - 257 mm

0D[2SHUDWLQJ3UHVVXUH
700 BAR

0LQ0D[+HLJKW
HDC6006 165 - 718 Inches
HDC3010

HDC10001

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
• Ideal for pushing and pulling applications.
types to suit any need. pg 65 • Dual wipers help prevent contamination
• CH38F - 3/8” high Àow female coupler
• Hard chrome plunger prevents rust and corrosion
• Hardened steel seat
Combo Kits
Most cylinders are available
in easy to order kits: Cylinder,
Gauge, Couplers, Hose
pg 60
and Pump.

Related Product: Hoses

We offer a variety of
hoses, ¿ttings, lengths
and materials.
pg 67

Cylinder
Oil Capacity
Capacity Center
Collapsed ([WHQGHG Plunger 0D[
Stroke Model Hole Weight
Height Height O.D. Pressure
(mm) Number Push Pull I.D. (kg)
Push Pull (mm) (mm) (mm) (BAR)
(cc) (cc) (mm)

30 Ton 20Ton 178 HDC3007 492 328 331 509 33 63 700 19.5
267 kN 178 kN 257 HDC3010 1051 658 432 689 33 63 700 25.7
89 HDC6003 750 500 248 337 54 92 700 29.8
60 Ton 44 Ton 165 HDC6006 1390 926 324 489 54 92 700 36.8
534 kN 391 kN
257 HDC6010 2165 1443 438 695 54 92 700 51.0
38 HDC10001 545 347 165 203 79 125 700 33.4

100 Ton 71 Ton 76 HDC10003 1089 694 254 330 79 125 700 51.4
890 kN 632 kN 152 HDC10006 2169 1388 343 495 79 125 700 69.5
257 HDC10010 3679 2345 461 718 79 125 700 90.2

150 Ton 82.8 Ton 203 HDC15008 4247 2170 349 552 100 150 700 108.5
1334 kN 737 kN

38
 Y

X E

HDC Series

Cylinders
Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

Relief Valve
I
All double acting cylinders are equipped with a
pressure relief valve located
next to the retract port.
These pressure relief valves
F help prevent cylinder over
pressuri]ation on the return
port side of the cylinder.

K
L High-Flow Couplers
B High-Flow Coupler: CH38F is
J included on all models except
where speci¿ed.

A Safety Instructions
3/8"-18NPTF

Visit our DO¶S and DON¶TS

section to review the best
methods of operation.
pg102
Always be prepared.

Z G

Dia.
Base to Top to Internal Collar Thread Base Mounting Hole
Min. 0D[ of
O.D. I.D. O.D. Inlet Return Internal Thread
Model Height Height Center Bolt Thread
D E F Port Port Thread Length Length
Number A B Tube Dia. Circle Thread Depth
(mm) (mm) (mm) G L H I K
(mm) (mm) C J X Y Z
(mm) (mm) (mm) (mm)
(mm) (mm) (mm)
HDC3007 331 509 85 114 33 63 23 60 1 "-16UN 24 4½"-12N 42 92 Ǫ"-16UNC 14
HDC3010 432 689 85 114 33 63 23 60 1 "-16UN 24 4½"-12N 42 92 Ǫ"-16UNC 14
HDC6003 248 337 125 159 54 92 27 67 2¾"-16UN 21 6¼"-12N 49 130 ½" 13UNC 14
HDC6006 324 489 125 159 54 92 27 67 2¾"-16UN 21 6¼"-12N 49 130 ½" 13UNC 14
HDC6010 438 695 125 159 54 92 27 67 2¾"-16UN 21 6¼"-12N 49 130 ½" 13UNC 14
HDC10001 165 203 165 213 79 125 27 44 4"- 16UN 27 - - 178 ǫ" 11UNC 19
HDC10003 254 330 165 213 79 125 27 86 4"- 16UN 27 8Ǫ"-12N 60 178 ǫ" 11UNC 19
HDC10006 343 495 165 213 79 125 27 86 4"- 16UN 27 8Ǫ"-12N 60 178 ǫ" 11UNC 19
HDC10010 461 718 165 213 79 125 27 86 4"- 16UN 27 8Ǫ"-12N 60 178 ǫ" 11UNC 19
HDC15008 349 552 190 248 100 150 38 60 - - - - - - -

39
 &yOinder Lifting +andOeV

• Designed for easy carrying cylinders

• Provides better control when positioning cylinder
• Easy installation

Model
For Cylinders
Number
LH25T34 H2504 through H2514
LH30T40 H3008, HD3008, HD3014, HC2002T, HC2006T
LH30T45 HC3002T, HC3006T, HD3007, HDC3010 LH25T34
LH55T49 HLN5504 through HLN5512

&OeviV and TangV

Plunger Base

CEP Series

CEB Series

F B
B

HD cylinders can be used in pushing and pulling

applications. In this photo, we see a HD2506 HD
cylinder set up for a pull application using a plunger D H H
clevis cylinder accessory
D

Safety Practices A A
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products. C C

Dimensions (mm)
Model
Application Cylinder Series
Number
A B C D F G H

H05* CEP05 ¾Ǝ-16N 29 57 16 14 - 16

Plunger H10**, H15, HD10 CEP15 1Ǝ-8UN 43 84 22 25 - 25
H25 CEP25 1½Ǝ-16UNC 57 97 32 38 - 32
H05* CEB05 39 44 54 16 29 25 16
H10 CEB10 58 64 73 22 8 40 25
Base
H15 CEB15 70 76 73 22 10 48 25
H25 CEB25 86 95 86 32 14 59 32

**Except H1001

40
&yOinder BaVeV Dimensions
For use with Model (mm)
Cylinder Series Number
A B C D
C
H05 CB05 8 118 200 39
H10
CB10 10 120 230 58
except H1001

D H15 CB15 12 122 254 70

Cylinders
C H25 CB25 16 126 280 87

B
A Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
pg102
&yOinder 6addOeV Always be prepared.

Grooved, Tilt, and Threaded

SD Series SDT Series SDTG Series HTD10

A
A

B 5°
B 5Û B
B

D D D D

C A C
C A

Saddle Model Dimensions (mm)

Capacity For Cylinder(s)
Type Number A B C D
SDT05 5 Ton / 44 kN H05 25 31 17 30
SDT10 10 Ton / 89 kN H10 except H1001 35 38 22 38
SDT15 15 Ton / 133 kN H15 38 40 22 40
SDT25 25 Ton / 222 kN H25 50 41 29 40
55-100 Ton
SDT55 H55, HD55, H75, HD75, H100, HLN55 and HLN100 71 33 13 33
489-890 kN
SDTG100 100 Ton / 890 kN HG100 and HDG100 75 67 43 20
Tilt
SDTG150 150 Ton / 1334 kN HG150 and HDG150 94 69 45 20
SDTG200 200 Ton / 1779 kN HG200 and HDG200 113 83 50 28
150-200 Ton
SDT200 HLN150 and HLN200 130 45 26 15
1334-1779 kN
250 Ton
SDT250 - 150 14 150 46
2224 kN
300 Ton
SDT300 - 195 66 139 100
2669 kN
SD05 5 Ton / 44 kN H05* 25 21 6
SD10 10 Ton / 89 kN H10** 35 27 6
Grooved
SD15 15 Ton / 133 kN H15 38 30 7
SD25 25 Ton / 222 kN H25 50 29 7
HT1006 and HT1010
Threaded HTD10 10 24 1"- 8UNC 45
H1002-H1014, HD1010-HD1012

41
 +and PXmS MatFhing &hart
Hand Pumps

• Match up the stroke length to the capacity of your cylinder to

¿nd the suggested hand pump to go with your cylinder

Capacity
Stroke
5 Ton 10 Ton 15 Ton 25 Ton 30 Ton 55 Ton 75 Ton 100 Ton
(mm)
44 kN 89 kN 133 kN 222 kN 267 kN 489 kN 667 kN 890 kN
< 25.4 0.69 - - - - - - -
25.40 1.00 2.24 3.14 5.14 6.49 10.99 16.10 20.57
50.80 2.00 4.48 6.28 10.28 12.98 21.98 32.20 41.14
76.20 3.00 6.72 9.42 15.42 19.47 32.97 48.30 61.71
101.60 4.00 8.96 12.56 20.56 25.96 43.96 64.40 82.28
127.00 5.00 11.20 15.70 25.70 32.45 54.95 80.50 102.85
152.40 6.00 13.44 18.84 30.84 38.94 65.94 96.60 123.42
177.80 7.00 15.68 21.98 35.98 45.43 76.93 112.70 143.99
203.20 8.00 17.92 25.12 41.12 51.92 87.92 128.80 164.56
228.60 9.00 20.16 28.26 46.26 58.41 98.91 144.90 185.13
254.00 10.00 22.40 31.40 51.40 64.90 109.90 161.00 205.70
304.80 12.00 26.88 37.68 61.68 77.80 131.88 193.20 246.84
330.20 13.00 29.12 40.82 66.82 84.37 142.87 209.30 267.41
355.60 14.00 31.36 43.96 71.96 90.86 153.86 225.40 287.98

Suggested*
Hand P350 P1000 P2301 P8701
P4301
Pump P601S P1201 P2301M P8701M
Models

*The suggested pump model is based on oil capacity requirements of the cylinder.

MatFhing &hart
Air, Electric and Gas Engine Pumps

• Match up the stroke length and capacity of the cylinder to ¿nd the
suggested pump to work with your application

Capacity
Stroke
(mm) 5 Ton 10 Ton 15 Ton 25 Ton 30 Ton 55 Ton 75 Ton 100 Ton
44 kN 89 kN 133 kN 222 kN 267 kN 489 kN 667 kN 890 kN
< 25.4 0.69 - - - - - - -
25.4 1.00 2.24 3.14 5.14 6.49 10.99 16.10 20.57
50.8 2.00 4.48 6.28 10.28 12.98 21.98 32.20 41.14

76.2 3.00 6.72 9.42 15.42 19.47 32.97 48.30 61.71

101.6 4.00 8.96 12.56 20.56 25.96 43.96 64.40 82.28

127 5.00 11.20 15.70 25.70 32.45 54.95 80.50 102.85
152.4 6.00 13.44 18.84 30.84 38.94 65.94 96.60 123.42
177.8 7.00 15.68 21.98 35.98 45.43 76.93 112.70 143.99
203.2 8.00 17.92 25.12 41.12 51.92 87.92 128.80 164.56
228.6 9.00 20.16 28.26 46.26 58.41 98.91 144.90 185.13
254 10.00 22.40 31.40 51.40 64.90 109.90 161.00 205.70
304.8 12.00 26.88 37.68 61.68 77.80 131.88 193.20 246.84
330.2 13.00 29.12 40.82 66.82 84.37 142.87 209.30 267.41
355.6 14.00 31.36 43.96 71.96 90.86 153.86 225.40 287.98
Suggested
PA1500
Air/Electric/ PA3801 PE40M3N02D
PA1500L
Gas PA600 PA3801M PE50M3N03D
PA1500M
Pump PE30M3N01D PG70M3N05
PA2000
Models

42
PRZer
6RXrFe PXmS TySe Page 1XmEer 
ReferenFe ,mage

Single Speed Metal Hand Pump (P-Series)

Two Speed Metal Hand Pumps (P-Series)

44-45
ManXaO

Two Speed Aluminum Hand Pumps (P-Series)

Double Acting Hand Pumps (P-Series)

Pumps
Foot Pump (P57-Series) 46

Two Speed Aluminum All Direction Hand Pump (P-Series) 47

All-Direction Air Pump (PA-Series) 47

Air Pumps (PA-Series)

Air

Double Acting Air Pump (PA-Series) 48-49

Remote Control Air Pump (PA-Series)

Rotary Air Pumps (PAR-Series) 50

Universal Motor Pumps (PU-Series) 51

Single Phase Electric Pumps

(OeFtriF

PE30 0.5 HP Electric Pumps

52-55
PE40 1 HP Electric Pumps

PE50 1.5 HP Electric Pumps

3 Phase Electric Pumps 56

PG70 5.5 HP Gas Engine Pump

*aV

57-59
PD70 4.6 HP HATZ Diesel Engine Pump

&RntrRO VaOveV and AFFeVVRrieV Page 62

PXmSV&yOinder &RmER·V Page 60

43
 +and PXmSV P Series
Aluminum and Steel
Combo Kits
Most hand pumps are available
in easy to order kits Pump,
Gauge, Couplers, Hose
and Cylinder pg 60

P4301 Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
P601S types to suit any need. pg 65

P350

Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
pg102
P2301
Always be prepared.

P1201

Product Information
P1000
• Metal reservoirs resist cracking
• Internal pressure relief valve for overload
protection
• Perfect for use with cylinders and hydraulic
tools or OEM applications
• Two-Speed pumps reduce user fatigue and
increase productivity
• P1000AD can not only be used in the
standard hori]ontal position, but can also be
used with the outlet port facing
upwards or downwards
position providing more
Àexibility in operation

P8701M P2301M

Pressure Rating/Oil Handle

Usable Piston
Model Oil Outlet Displacement per Stroke Operating Reservoir
Oil Capacity Stroke
Number Port 1st Stage 2nd Stage Force Construction
(cc) (mm)
(BAR/cc) (BAR/cc) (N)

Single Speed - Single Acting

P601S 600 Ǫ"-18 NPTF - 700/2.46 20 484.9 Steel

2-Speed - Single Acting

P350 350 ¼"-18 NPTF 13.8/2.95 700/0.82 10 391.4 Aluminum
P1000 1000 Ǫ"-18 NPTF 13.8/13.27 700/2.29 21 440.4 Aluminum

P1000AD* 870-1000 Ǫ"-18 NPTF 13.8/13.27 700/2.29 21 440.4 Aluminum

P1201 1100 Ǫ"-18 NPTF 13.8/13.27 700/2.29 21 440.4 Steel

P2301 2200 Ǫ"-18 NPTF 13.8/13.27 700/2.29 21 440.4 Steel
P4301 4100 Ǫ"-18 NPTF 13.8/13.27 700/2.29 21 440.4 Steel
P8701 7800 Ǫ"-18 NPTF 20.01/126.34 700/4.75 43 636.1 Steel

2-Speed - Double Acting

P2301M 2200 Ǫ"-18 NPTF 13.8/13.27 700/2.29 21 440.4 Steel
P4301M 4100 Ǫ”-18 NPTF 14/13.2 700/2.3 526 440.0 Steel
P8701M 7800 Ǫ"-18 NPTF 20.01/126.34 700/4.75 43 636.1 Steel

* Oil capacity varies by position. Pump can be mounted outlet up or down

44
 .2 .2
10

12
10

J D D H J
H
12
K
K
G G
A A

Ǫ"-18NPTF
B
Ǫ"-18NPTF
B

F
F C
E
C

.2
10

10
.2
H J D
D H J D H J
K
K

12
G K

Pumps
G
A G
A
A

1/4"-18NPTF B Ǫ"-18NPTF B
Ǫ"-18NPTF B
F
F
F
C E

E C C

G
A

D H J

B
F

G D
A
C

Ǫ"-18NPTF B

H J
25

Dimensions (mm)
Weight
Model
w/Oil
Number A B C D E F G H J K
(kg)

Single Speed - Single Acting

P601S 482 160 506 115 40 32 511 100 95 452 5.9

2-Speed - Single Acting

P350 323 150 329 85 340 34 343 98 65 366 3.0
P1000 552 175 507 120 92 32 576 100 100 430 6.2
P1000AD* 552 177 507 129 92 46 576 100 100 430 6.2
P1201 525 182 586 123 - 44 552 95 95 540 9.3
P2301 525 173 609 135 - 44 553 95 90 573 12.6
P4301 524 195 581 135 - 44 551 95 95 545 17.1
P8701 655 295 771 293 614 210 684 387 284 34.5

2-Speed - Double Acting

P2301M 525 173 659 120 - - 553 95 90 573 14.7
P4301M 524 195 630 120 - - 552 95 95 545 19.0
P8701M 655 295 771 293 614 229 684 387 284 35.1

* Oil capacity varies by position. Pump can be mounted outlet up or down and does not need to be horizontal

45
 )RRt PXmS
P57 Series - 10,000 PSI

83 mm
483 mm

P570FP

Safety Practices

400 mm
Good industry practice
recommends not exceeding 27 mm

41°
80% of maximum rated
capacities of all our products.
3/8” - 18NPTF

7.9°

186 mm
5.4°
HF Kits
Consider using our
46 mm

portable HF kits in
conjunction with
this pump. pg 19

115 mm 281 mm
610 mm

Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation. 102
195 mm

Always be prepared. pg

High-Flow Couplers
High-Flow Coupler: CH38F is
included on all models except
where speci¿ed. 521 mm

Related Product: Nut Splitters

The HNS nut splitters pair up with this portable foot pump. Our hydraulic nut splitters come in a
spacious tool box so its easy to carry around from site-to-site. This tool box is
large enough to hold small cylinders, saddles, spacers or whatever tool you need to
bring with you to your next job site.
Model Number Bolt Range +H[DJRQ1XW5DQJH
NS1319 6-12 13-19
NS1924 12-16 19-24
NS2432 16-22 24-32
NS3241 22-27 32-41
NS4150 27-33 41-50
NS5060 33-39 50-60
NS6075 39-48 60-75
pg 92

Pressure Rating Oil Displacement

0D[ Piston
Usable Oil Model (BAR) per Stroke (cc) Weight
Handle Stroke
(cc) Number 1st 2nd "1st 2nd (kg)
Effort (kg) (mm)
Stage Stage Stage" Stage
500 P570FP 13.8 690 13 2 57.7 21 8.2

46
AOO PRVitiRn AOXminiXm PXmSV
• Pump can work in any position
• Mounting plate allows the pump to be securely fastened.

PA600 PA600H
P1000AD

360°

Pumps
360° 360°

Output Flow Rate Input Air

Air
Model Usable Oil Oil Outlet Pressure Reservoir
No Load Load Consumption
Number Capacity (L) Port Required Construction
(L/min) (L/min) (L/min)
(BAR)
Single Acting
PA600 138.5 Ǫ"-18 NPTF 1.00 0.15 7.59-12.07 220.87 Aluminum
PA600H 138.5 Ǫ"-18 NPTF 1.00 0.15 7.59-12.07 220.87 Aluminum

Pressure Rating/Oil Handle

Usable Piston
Model Oil Outlet Displacement per Stroke Operating Reservoir
Oil Capacity Stroke
Number Port 1st Stage 2nd Stage Force Construction
(cc) (mm)
(BAR/cc) (BAR/cc) (N)

2-Speed - Single Acting

P1000AD* 869-1016 Ǫ"-18 NPTF 13.8/13.27 700/2.29 21 440.4 Aluminum

* Oil capacity varies by position. Pump can be mounted outlet up or down

For sizes: P1000AD - Page 44

PA600 & PA600H - Page 48

360°

47
 Air PXmSV PA Series
Air Actuated Power
Flow Rate @ 100 psi air pressure
70

Oil Flow in 3/min X

60

50

40

30

20
PA1500 PA600H
10
PA600
0
0 2,000 4,000 6,000 8,000 10,000
psi
Pressure Pressure psi X
Model PA1500
Model PA2000 Turbo

Air Consumption= 7.8cfm

Product Information
• Metal reservoirs resist cracking
• US Patent No. 5,946,912, a built in bypass
device protects the hydraulic system from
over pumping damage
PA7550 • A compact yet powerful Air Turbo Motor US
PA3801 Patent No. 5,341,723
PA2000
• Suggested air inlet range:
110-175 psi / 7.6-12.1 bar
• Maximum working pressure:
10,000 psi / 700 Bar

PA1500A Pressure Adjustment

PA1500A Pressure can be
adjusted externally from
1,000 psi / 70 Bar to
10,000 psi / 700 Bar.

PA7550M PA3801M
PA1500M

Output Flow Rate Input Air

Air
Model Usable Oil Oil Outlet Pressure Reservoir
No Load Load Consumption
Number Capacity (L) Port Required Construction
(L/min) (L/min) (L/min)
(BAR)
Single Acting
PA600 138.5 Ǫ"-18 NPTF 1.00 0.15 7.59-12.07 220.87 Aluminum
PA600H 138.5 Ǫ"-18 NPTF 1.00 0.15 7.59-12.07 220.87 Aluminum
PA1500 346.4 Ǫ"-18 NPTF 1.08 0.18 7.59-12.07 220.87 Aluminum
PA1500A* 346.4 Ǫ"-18 NPTF 1.08 0.18 7.59-12.07 220.87 Aluminum
PA1500L** 346.4 Ǫ"-18 NPTF 1.00 0.16 7.59-12.07 220.87 Aluminum
PA2000 462.2 Ǫ"-18 NPTF 1.07 0.20 7.59-12.07 220.87 Aluminum
PA3801 877.8 Ǫ"-18 NPTF 1.07 0.18 7.59-12.07 220.87 Steel
PA3801L** 877.8 Ǫ"-18 NPTF 1.00 0.16 7.59-12.07 220.87 Steel
PA7550 1743.6 Ǫ"-18 NPTF 1.07 0.18 7.59-12.07 220.87 Steel

Double Acting
PA1500M 346.4 Ǫ"-18 NPTF 1.08 0.18 7.59-12.07 220.87 Aluminum
PA3801M 877.8 Ǫ"-18 NPTF 1.07 0.18 7.59-12.07 220.87 Steel
PA7550M 1743.6 Ǫ"-18 NPTF 1.07 0.18 7.59-12.07 220.87 Steel

* This unit is equipped with an external pressure adjustment (70-700 bar)

**These pumps are equipped with a hand held air powered pendant

48
 PA600
¼"-18NPTF

A
B
C

PA Series
8 mm Ǫ"-18NPTF E

PA1500
¼"-18NPTF Ǫ"-18NPTF
52
230 0.1

117
C 104

Pumps
0.1
B D

E Pitch 4 x 230 x 104 x 20 mm deep.

A

PA1500L PA1500M
E E

D D

3/8"-18NPTF
1/4"-18NPTF 3/8"-18NPTF
1/4"-18NPTF
Air Pump Combo
PA1500 air pumps are available
C C in easy to order kits: pump,
B
B gauge, coupler, hose
and cylinder pg 60
A A

PA3801 and PA7550 1.89” M6x15L

3/8”-18NPTF
1/4”-18NPTF
Related Product: Hoses
2.04”
C We offer a variety of
B D hoses, ¿ttings, lengths
and materials.
pg 67
A E

Dimensions (mm)
Base Weight
Model
Mounting w/Oil
Number A B C D E
Holes (kg)

Single Acting
PA600 yes 426 250 178 157 142 6.4
PA600H yes 426 250 178 114 146 5.7
PA1500 yes 263 127 185 131 136 8.2
PA1500A* yes 263 127 185 131 136 8.2
PA1500L** yes 278 160 204 130 136 8.8
PA2000 yes 321 163 207 132 187 9.1
PA3801 no 321 129 187 133 187 12.3
PA3801L** no 321 163 207 132 187 13.8
PA7550 no 321 127 211 156 214 16.3

Double Acting
PA1500M yes 267 127 203 136 136 8.7
PA3801M no 321 128 204 135 187 10.9
PA7550M no 321 152 229 161 255 18.1

* Unit is equipped with an external pressure adjustment (70-700 bar)

**These pumps are equipped with a hand held air powered pendant

49
 RRtary Air PXmSV
PAR Series - 10,000 PSI Rated

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

Related Product: Hoses 3$50

We offer a variety of 3$5'
hoses, ¿ttings, lengths
and materials.
pg 67 3$5'
PAR Series

Will be delivered PAR1703 and PAR4003

without Hydraulic Oil
O
IL

3/8"-18NPTF (x2)

PARD1701 A
B
3/8"-18NPTF(x2) C
D

E
1/2” - NPT Air Inlet
1/2” - NPT Air Inlet

C
D

E F F
G G

Usable Oil Output Air

Used Motor Pressure Pressure Rating
Oil Model Flow Rate Valve Valve Pressure
with Size Rating
Capacity Number 1 Stage 2 Stage 1 Stage 2nd Stage
st nd st Type Function Range
Cylinder (hp) (BAR)
(L) (BAR) (BAR) (L/min) (L/min) (BAR)
1.7 3.8 PARD1701 700 48.30 700 5.13 0.36 Dump Advance/Return 4.14~5.52
1.7 11.4 PARD1703 700 48.30 700 5.13 0.36 Dump Advance/Return 4.14~5.52
Single
1.7 11.4 PAR1703 700 48.30 700 6.83 0.36 Manual PW3 Advance/Hold/Return 4.14~5.52
Acting
4 11.4 PARD4003 700 48.30 700 7.62 1.15 Dump Advance/Return 4.14~0.69
4 11.4 PAR4003 700 48.30 700 8.39 1.15 Manual PW3 Advance/Hold/Return 4.14~0.69

Double 1.7 11.4 PARM1703 700 48.30 700 6.83 0.36 Manual PW4 Advance/Hold/Return 4.14~5.52
Acting 4 11.4 PARM4003 700 48.30 700 8.39 1.15 Manual PW4 Advance/Hold/Return 4.14~0.69

Model Air Consumption 0D[6RXQG/HYHO Dimensions (mm) Weight

Number (L/min) (dBA) A B C D E F G (kg)
PARD1701 1245.94 93 485 239 147 120 205 313 404 19.1
PARD1703 1245.94 93 - 304 212 185 305 313 456 24.5
PAR1703 1245.94 93 303 267 209 185 305 313 459 24.9
PARD4003 2690.10 100 - 344 212 185 305 313 467 29.9
PAR4003 2690.10 100 344 267 209 185 305 313 470 30.4
PARM1703 1245.94 93 303 267 209 185 305 313 459 24.9

50
 8niverVaO MRtRr PXmSV
PU Series - Light-Weight Pumps

• Portable, light weight and compact design

• Universal Motor, starts under full load and is available
in either 120VAC 50/60 HZ or 240VAC 50/60HZ
• 3mt 24 VAC pendant control for safety
• Weighs only 17 kg. with oil
• External pressure adjustment is available
• Designed for intermittent duty operation
• Gauge port on control valve

PU20M4N01B

Hydraulic Gear Pullers

5, 10, 15, 25 & 50 Ton Hydraulic Gear Pullers
have a safety cage design to help keep the

Pumps
jaws tight to the gear and
prevent slippage that can cause
injury. Pair these with BVA¶s
PU20M3N01B Lightweight
e-pump for portability. pg 88

1/4”-NPT
330 mm

1/4”-NPT
1/4”-NPT Flange Spreaders
BVA¶s Pin Type Flange Spreaders are
available in both 5 & 10 Ton
202 mm

models and well suited for most

environments. For portability
140 mm

and speed the PU20M4N01B

113 mm

142 mm would be an ideal choice. pg 91

205 mm Hydraulic Nut Splitters

Available in 3 models, each nut splitter can
split a wide range of nut si]es thereby
reducing the number of splitters
needed. The BVA
PU20DMP01B dump style
pump functions well with
3/8”-18NPTF these splitters pg 92

316 mm
362 mm

Flow Rate Voltage 50/60 Hz

Motor Weight Length Width Height
Valve Function 1st Stage 2nd Stage 120 VAC 240 VAC
Size (kg) (mm) (mm) (mm)
L/min BAR L/min BAR Model # Model #
3W/3P Advance/Hold Return 2.18 13.80 0.46 700 1.0 Hp PU20M3N01B PU20M3N01C 16.8 362 205 300
4W/3P Advance/Hold/Return 2.18 13.80 0.46 700 1.0 Hp PU20M4N01B PU20M4N01C 16.8 362 205 300

51
 (OeFtriF PXmSV
PE30, PE40, PE50 Series
- Single Phase • Meets OSHA regulations for sound (80dBA)
• 2 Stage pumps provide fast run up before the high pressure stage
• Suction strainers screen out contamination to prevent pump damage
• All units are wired as 240 VAC 50 H]
• All hand pendants are wired 24 VAC for safety
• Starts under full load

PEW03 Optional

Use with Flow Rate

Motor
PE40M4N02D
Cylinder 1st Stage 2nd Stage
Size
Type L/min BAR L/min BAR
Manual Valve
4.80 24.15 0.30 700 0.5 Hp
3W/3P
Advance 5.10 48.30 0.61 700 1.0 Hp
/Hold Return
7.80 48.30 1.00 700 1.5 Hp
6.3 48 1.22 700 3 Hp
4.80 24.15 0.30 700 0.5 Hp
4W/3P
Advance 5.10 48.30 0.61 700 1.0 Hp
/Hold/Return
7.80 48.30 1.00 700 1.5 Hp
6.3 48 1.22 700 3 Hp

Manual Valve w/10 ft. Motor Pendant

4.80 24.15 0.30 700 0.5 Hp
3W/3P
Advance 5.10 48.30 0.61 700 1.0 Hp
/Hold Return
7.80 48.30 1.00 700 1.5 Hp
6.3 48 1.22 700 3 Hp
4.80 24.15 0.30 700 0.5 Hp
4W/3P
Advance 5.10 48.30 0.61 700 1.0 Hp
/Hold/Return
7.80 48.30 1.00 700 1.5 Hp
6.3 48 1.22 700 3 Hp

Solenoid Valve w/10 ft. Pendant & Locking Plate

4.80 24.15 0.30 700 0.5 Hp
3W/3P
Advance 5.10 48.30 0.61 700 1.0 Hp
/Hold Return
7.80 48.30 1.00 700 1.5 Hp
6.3 48 1.22 700 3 Hp
4.80 24.15 0.30 700 0.5 Hp
4W/3P
Advance 5.10 48.30 0.61 700 1.0 Hp
/Hold/Return
7.80 48.30 1.00 700 1.5 Hp
6.3 48 1.22 700 3 Hp

52
 PE50M4N03D

PE60M4N15D

Pumps
PE Series

PE40M4N02D Safety Practices

Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.
PE30M4N01D

Usable Oil Capacity

1 Gal 2 Gal 3 Gal 5 Gal 10 Gal 15 Gal 25 Gal
Model Number Model Number Model Number Model Number Model Number Model Number Model Number
Manual Valve
PE30M3N01D PE30M3N02D PE30M3N03D - - - -
- PE40M3N02D PE40M3N03D PE40M3N05D PE40M3N10D PE40M3N15D PE40M3N25D
- - PE50M3N03D PE50M3N05D PE50M3N10D PE50M3N15D PE50M3N25D
PE30M4N01D PE30M4N02D PE30M4N03D - - - -
- PE40M4N02D PE40M4N03D PE40M4N05D PE40M4N10D PE40M4N15D PE40M4N25D
- - PE50M4N03D PE50M4N05D PE50M4N10D PE50M4N15D PE50M4N25D

Manual Valve w/10 ft. Motor Pendant

PE30W3N01D PE30W3N02D PE30W3N03D - - - -
- PE40W3N02D PE40W3N03D PE40W3N05D PE40W3N10D PE40W3N15D PE40W3N25D
- - PE50W3N03D PE50W3N05D PE50W3N10D PE50W3N15D PE50W3N25D
PE30W4N01D PE30W4N02D PE30W4N03D - - - -
- PE40W4N02D PE40W4N03D PE40W4N05D PE40W4N10D PE40W4N15D PE40W4N25D
- - PE50W4N03D PE50W4N05D PE50W4N10D PE50W4N15D PE50W4N25D

Solenoid Valve w/10 ft. Pendant

PE30S3N01D PE30S3N02D PE30S3N03D - - - -
- PE40S3N02D PE40S3N03D PE40S3N05D PE40S3N10D PE40S3N15D PE40S3N25D
- - PE50S3N03D PE50S3N05D PE50S3N10D PE50S3N15D PE50S3N25D
PE30S4N01D PE30S4N02D PE30S4N03D - - - -
- PE40S4N02D PE40S4N03D PE40S4N05D PE40S4N10D PE40S4N15D PE40S4N25D
- - PE50S4N03D PE50S4N05D PE50S4N10D PE50S4N15D PE50S4N25D

53
 (OeFtriF PXmSV
PE30 Series
Electric Power Source

3/8"-18 NPTF

F 5/8”-18UNF
E
D

G H
PE30M4N01D PE60M4N15D
B A

Pump Accessories
See the assortment PE40/PE50/PE60 Series
of accessories designed
to work with these pumps.
pg 62

Safety Practices 3/8"-18 NPTF

Good industry practice
recommends not exceeding
80% of maximum rated C
capacities of all our products.
5/8”-18UNF
F
E
D
Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation. G H
Always be prepared. pg102 B A

PE40/PE50 Series
Pressure Settings With Casters
Custom pressure settings
available upon request.
Contact your local
BVA dealer.
3/8"-18 NPTF

Reservoir Sizing
C
Recommended reservoir si]ing 5/8”-18UNF
is Extended Cylinder + Hose
F
Volume Oil Capacity x 1.3 E D

Will be delivered G
H
without Hydraulic Oil B A
O
IL

Reservoir Dimensional Table (mm) Pump Weight by Series* (kg)

Size (L) A B C D E F G H PE30 PE40 PE50 PE60

3.8 323 262 485 119 145 305 206 315 27.7 - - -

7.6 424 305 455 152 175 335 114 315 34.0 32.7 - -

11.4 424 305 500 183 208 267 114 315 38.1 36.7 41.3 -

18.9 424 305 630 312 335 394 114 315 - 46.3 50.8 47.3

37.9 531 419 800 483 505 566 211 419 - 83.5 88.0 -

56.8 531 419 879 561 587 645 211 419 - 115.7 120.2 76

94.6 650 541 879 561 587 645 269 541 - 164.2 168.7 -

* Pump weights include oil.

54
 6ingOe PhaVe PXmS Matri[ &hart
If you don¶t see a pump that would ¿t your application needs, you can custom build a pump to your
desired speci¿cations. Use this Pump Matrix Chart as a guide for creating your very own custom
built Electric Pump. For assistance in building your pump, call your local BVA Representative.
PE Series

P E 30 S4L 02 A
1 2 3 4 5 6 2UGHULQJ([DPSOH
Product Motor Flow Valve Type 5HVHUYRLU Voltage
Type Type Group /Operation Size PE30M4N
N01
1D

1 - Product Type After reviewing this model number, we

know that the pump has the

Pumps
P Pump following speci¿cations:

2 - Motor Type - Electric power source

- ½ Hp (0.37 kN) Àow group
E Induction Electric Motor, TEFC - Manual Valve 4W/3P
- 1 gallon/3.8 L reservoir tank
3 - Flow Group
30 293/18 in3/min @ 350//700 BAR, ½ Hp (0.37 kN)
40 311/37 in3/min @ 700//700 BAR, 1 Hp (0.75 kN)
50 476/61 in3/min @ 700//700 BAR 1.5 Hp (1.12 kN)
60 6.3/1.22 L/min @ 48/700 BAR,3 Hp (2.24 kN)

4 - Valve Type/Operation
CMR Pump Mounted Manifold Block - Pressure & Return Ports Only

M2N Manual Valve 3W/2P PE30M4N01D

M3N Manual Valve 3W/3P
M4N Manual Valve 4W/3P
M3L Manual Valve 3W/3P w/Locking Plate
M4L Manual Valve 4W/3P w/Locking Plate Related Product: Gauges
Reduce the risk of overloading
W2N Manual Valve 3W/2P w/10ft Motor Control Pendant your product by using a gauge.
A variety of graduations and
W3N Manual Valve 3W/3P w/10ft Motor Control Pendant
types to suit any need. pg 65
W4N Manual Valve 4W/3P w/10ft Motor Control Pendant
W3L Manual Valve 3W/3P w/Locking Plate and 10ft Motor Control Pendant
W4L Manual Valve 4W/3P w/Locking Plate and 10ft Motor Control Pendant

S3N Solenoid Valve 3W/3P (Spool Type) Related Product: Footpedals

S4N Solenoid Valve 4W/3P (Spool Type) These can be used with
S3L Solenoid Valve 3W/3P w/Locking Plate (Spool Type Valve) all pumps equipped with
S4L Solenoid Valve 4W/3P w/Locking Plate (Spool Type Valve) solenoid valves
pg 66

5 - Reservoir Size
01 1 Gallon / 3.8 L
02 2 Gallons / 7.6 L Related Product: Hoses
03 3 Gallons / 11.4 L We offer a variety of
05 5 Gallons / 19.4 L hoses, ¿ttings, lengths
10 10 Gallons / 38 L and materials.
pg 67
15 15 Gallons / 56 L
25 25 Gallons / 95 L

6 - Voltage Safety Instructions

A 120V 1 ph 50 H] Visit our DO¶S and DON¶TS
230V 1 ph 50 H] - European Plug section to review the best
D methods of operation.
pg102
Always be prepared.
1RWDOORSWLRQVDUHDYDLODEOHLQDOOFRQ¿JXUDWLRQV7DEOHLVIRUUHIHUHQFHRQO\3OHDVHFRQVXOW\RXU
local BVA dealer if you want to order a custom pump or if you have questions.

Will be delivered
without Hydraulic Oil
O
IL

55
 3PhaVe (OeFtriF PXmSV
Electric Power Source
• All hand pendants are wired with 24 VAC
• Quiet operation meets OSHA regulations (80dBA)
• 2 speed operation allows for faster cylinder advance
• Full load starting capacities
• Internal suction strainer keeps contamination from damaging pump
• Rugged durable design meets the demands of industrial applications
• Precision components to minimi]e wear and improve overall dependability
• Reservoirs equipped with sight level gauges
• PE60 Models are standard as 380 VAC 50 H]
PE60M4N06W
3PhaVe PXmS Matri[ &hart
Pressure Settings
Custom pressure settings If you don¶t see a pump that would ¿t your application needs, you can custom build a pump to your
available upon request. desired speci¿cations. Use this Pump Matrix Chart as a guide for creating your very own custom
Contact your local built Electric Pump. For assistance in building your pump, call your local BVA Representative.
BVA dealer.

Safety Practices P E 60 M4N 06 W

Good industry practice
recommends not exceeding 1 2 3 4 5 6
80% of maximum rated Product Motor Flow Valve Type 5HVHUYRLU Voltage
capacities of all our products. Type Type Group /Operation Size

1 - Product Type
P Pump
Will be delivered
without Hydraulic Oil 2 - Motor Type
O
IL

E Induction Electric Motor, TEFC

3 - Flow Group
Pump Accessories
See the assortment 60 6300 cc/min @ 48 BAR
of accessories designed 1330 cc/min @ 700 BAR, 3.0 Hp
to work with these pumps.
pg 62 4 - Valve Type/Operation
M3N Manual Valve 3W/3P
Related Product: Gauges M4N Manual Valve 4W/3P
Reduce the risk of overloading
your product by using a gauge. W3N Manual Valve 3W/3P w. 10 ft Motor Control Pendant
A variety of graduations and W4N Manual Valve 4W/3P w. 10 ft Motor Control Pendant
types to suit any need. pg 65

5 - Reservoir Size
06 6 Gallons
Related Product: Hoses
Safety Instructions
We offer a variety of 6 - Voltage Visit our DO¶S and DON¶TS
hoses, ¿ttings, lengths
W 380-415V 3 ph 50 H] section to review the best
and materials.
pg 67 methods of operation.
pg102
Always be prepared.

Oil Output
Motor Sound Motor Usable Oil Pressure Rating Flow Rate Current
Model Valve Valve (BAR)
Voltage Level Size Capacity (L) Draw
Number Type Function
(volts) (dBA) (kW) (L) (Amp)
1st Stage 2nd Stage 1st Stage 2nd Stage

380 Volt

4-Way
PE60M4N06W Manual 380 80 2.24 22.7 48 700 6.3 1.33 4.5
3-Position

Dimensions
Model Weight
(mm)
C
Number (kg)
A B C D E F H
F
ED 380 Volt

B H
A PE60M4N06W 524 376 583 224 247 307 436 62

56
 *aV and 'ieVeO PXmSV
PG/PD Series - Portable Power

Pumps
PG70M4N05

Will be delivered
without Hydraulic Oil
O
IL

PD70M4N05

Safety Practices
Good industry practice
recommends not exceeding Gas Pumps Diesel Pumps
80% of maximum rated
capacities of all our products.

Related Product: Gauges

Reduce the risk of overloading
your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

Related Product: Hoses • Gas engine pumps will provide 10,000 psi • Diesel engine pumps will provide 10,000 psi
We offer a variety of at remote locations at remote locations
hoses, ¿ttings, lengths • Industrial grade 5.5 Honda Gas Engine • Industrial grade 4.6 hp / 3.5 kN HATZ Diesel
and materials. • Ideal for applications at remote locations engine
pg 67
• Two speed pump designed for rapid • Locking solenoid control valve for use with
cylinder advance single or double acting cylinders or tools
• Gas pump features a sturdy protective roll • Two speed pump designed for rapid
cage for use in the toughest environments cylinder advance
• Manual control valve for use with single or • Pump features a sturdy protective roll cage
Safety Instructions double acting cylinders or tools for use in the toughest environments
Visit our DO¶S and DON¶TS • Ideal for application when diesel fuel in
section to review the best remote environments is required
methods of operation. • Optional: electric start
pg102
Always be prepared.

Flow Rate
Valve Function Valve Type Use with Cylinder Type 1st Stage 2nd Stage
L/min BAR L/min BAR
3W/3P Manual 7.0 48.3 1.6 700
Advance/Hold
Solenoid 9.8 48.3 3.3 700
Return (only for Diesel)

4W/3P Manual 7.0 48.3 1.6 700

Advance/Hold
Solenoid 9.8 48.3 3.3 700
Return (only for Diesel)

57
 *aV'ieVeO PXmS Matri[ &hart
If you don¶t see a pump that would ¿t your application needs, you can custom build a pump to your
desired speci¿cations. Use this Pump Matrix Chart as a guide for creating your very own custom
gas/diesel pump. For assistance in building your pump, call your local BVA Representative.

PG/PD Series
P D 70 S4L 05
1 2 3 4* 5 2UGHULQJ([DPSOH
Product Motor Flow Valve Type 5HVHUYRLU PG70M4N
N05
Type Type Group /Operation Size
After reviewing this model number, we
know that the pump has the
1 - Product Type following speci¿cations:

P Pump - Gasoline power source

- Manual Valve 4W/3P
2 - Motor Type - 5 gallon reservoir tank
G Gas Motor
D Diesel Motor

3 - Flow Group
70 7000 cc/min @ 48 BAR
1640 cc/min @ 700 BAR

4* - Valve Type/Operation

CMR Pump Mounted Manifold Block - Pressure & Return Ports Only

M2N Manual Valve 3W/2P

M3N Manual Valve 3W/3P
M4N Manual Valve 4W/3P
M3L Manual Valve 3W/3P w/Locking Plate Roll Cages
M4L Manual Valve 4W/3P w/Locking Plate
All gas and diesel pumps are
equipped with roll cages to
S3N Solenoid Valve 3W/3P (Spool Type)
prevent any damage that might
S4N Solenoid Valve 4W/3P (Spool Type) occur on a job site.
S3L Solenoid Valve 3W/3P w/Locking Plate (Spool Type Valve)
S4L Solenoid Valve 4W/3P w/Locking Plate (Spool Type Valve)

5 - Reservoir Size
Optional Electric Start
05 5 Gallons
10 10 Gallons Electric start is optional and
15 15 Gallons available with the diesel
engine.

* Solenoid options are not available on the PG70 Series Gas Pumps

1RWDOORSWLRQVDUHDYDLODEOHLQDOOFRQ¿JXUDWLRQV7DEOHLVIRUUHIHUHQFHRQO\3OHDVHFRQVXOW Will be delivered

your local BVA dealer if you want to order a custom pump or if you have questions. without Hydraulic Oil
O
IL

Usable Oil Capacity

Motor HP / Type 5 Gallons 10 Gallons 15 Gallons
Model Number Model Number Model Number
Gas - 5.5 Hp Honda PG70M3N05 - -
Diesel - 7.3 Hp HATZ PD70S3L05 PD70S3L10 PD70S3L15
Gas - 5.5 Hp Honda PG70M4N05 - -
Diesel - 7.3 Hp HATZ PD70S4L05 PD70S4L10 PD70S4L15

58
 *aV and 'ieVeO PXmSV
PG/PD Series

Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

PD70M4N05

Related Product: Gauges

Reduce the risk of overloading
PG70M3N05 your product by using a gauge.
A variety of graduations and
types to suit any need. pg 65

Pumps
Related Product: Hoses
We offer a variety of
hoses, ¿ttings, lengths
H and materials.
pg 67

G Safety Instructions
F
E Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
Always be prepared. pg102
D
B
C A

F E

D B

C A

Model Dimensions (mm) Weight**

Number* A B C D E F G H (Kg)
Gas Pumps
PG70xxx05 675 546 532 266 292 316 393 627 73.5
PG70xxx10 718 594 686 343 305 328 441 627 137.4
PG70xxx15 718 594 686 343 305 328 441 627 168.7
Diesel Pumps
PD70xxx05 675 546 532 266 292 316 393 828 115.7
PD70xxx10 718 594 686 343 305 328 441 828 149.2
PD70xxx15 718 660 686 343 305 328 441 828 182.8

* “xxx” in the model number refers to the type of valve you may use on the gas/diesel engine
SXPS5HIHUWR\RXUORFDO%9$GHDOHURUWKH0DWUL[&KDUWRQSDJHWREXLOG\RXURZQSXPS
** Pump weights include oil.

59
 &RmEinatiRnV
Pump and Cylinder Sets

Each set includes:

• ¼" ID 2 meter Hydraulic Hose
• Ǫ" High Flow Male Coupler
• Adapter (SP3 Models Only)
• 63 mm Diameter Wet Gauge

Cylinder Hand Pump Hand Pump Hand Pump Air Pump

P350 P1000 P2301 PA1500
Single Acting Collapsed
Cylinder Type Model Stroke
Capacity Height
Number (mm)
(mm)

5 Ton
H0505 129 221 SP3-0505 - - -
44 kN

H1002 51 123 - SP10-1002 - SA15-1002

H1004 102 174 - SP10-1004 - SA15-1004

General Purpose
H1006 151 250 - SP10-1006 - SA15-1006
Cylinders 10 Ton
89 kN HT1006 151 291 - SP10-1006T - SA15-1006T

H1010 253 352 - SP10-1010 - SA15-1010

HT1010 253 393 - SP10-1010T - SA15-1010T

15 Ton H1504 101 200 - SP10-1504 - SA15-1504

133 kN H1506 152 270 - SP10-1506 - SA15-1506

H2502 51 168 - SP10-2502 - SA15-2502

H2504 102 219 - SP10-2504 - SA15-2504

25 Ton
H2506 155 272 - SP10-2506 - SA15-2506
222 kN
H2508 206 323 - - SP23-2508 SA15-2508

H2514 362 476 - - SP23-2514 SA15-2514

55 Ton
H5506 159 283 - - SP23-5506 SA15-5506
489 kN

100 Ton
H10002 51 219 - - SP23-10002 -
890 kN

5 Ton HF0503* 6 32 SP3-0503F - - -

44 kN HF0503B * 6 32 SP3-0503B - - -

10 Ton HF1005 11 43 SP3-1005F - - -

89 kN
HF1005B 11 43 SP3-1005B - - -
Flat Body
Cylinders 20 Ton HF2005 11 51 SP3-2005F - - -
178 kN HF2005B 11 51 SP3-2005B - - -

30 Ton HF3005 13 59 SP3-3005F - - -

267 kN HF3005B 13 59 SP3-3005B - - -

HF5006 16 67 SP3-5006F - - -
50 Ton
445 kN HF5006B 16 67 SP3-5006B - - -

75 Ton
HF7506 16 80 SP3-7506F - - -
667 kN

100 Ton
HF10006 16 86 SP3-10006F - - -
890 kN

150 Ton
HF15006 16 100 - SP10-15006F - -
1334 kN

+)LVILWWHGZLWK&50FRXSOHU

60
 We see here our combo kit SA15-3002L getting set
up to lift a load. This combo kit includes a HL3002
cylinder, PA1500 air pump, CS3814 hose/CH38M &RmEinatiRnV
coupler set, CF3814 gauge adapter and a GBW1416
pressure gauge. Pump and Cylinder Sets

Cylinder Hand Pump Hand Pump Hand Pump Air Pump

P350 P1000 P2301 PA1500
Single Acting
Cylinder Type Stroke Collapsed
Capacity Model
(mm) Height (mm)

HC1201T 8 60 SP3-1201T - - -

HC1202 41 120 SP3-1202T - - -

12 Ton
107 kN
Hollow Hole HC1202XT 41 120 SP3-1202XT - - -
Cylinders
HC1203XT 76 184 - SP10-1203XT - -

20 Ton
HC2002T 51 162 - SP10-2002T - SA15-2002T
178 kN

HC3002T 64 179 - SP10-3002T - -

30 Ton

Combination Kits
267 kN
HC3006T 155 331 - SP10-3006T - SA15-3006T

HC6003T 76 248 - SP10-6003T - SA15-6003T

60 Ton
534 kN
HC6006T 152 324 - - SP23-6006T SA15-6006T

100 Ton
HC10003T 76 254 - - SP23-10003T SA15-10003T
890 kN

10 Ton
HL1001 38 88 SP3-1001L SP10-1001L - SA15-1001L
Low Pro¿le 89 kN
Cylinders
20 Ton
HL2002 44 99 SP3-2002L SP10-2002L - SA15-2002L
178 kN

30Ton
HL3002 62 117 SP3-3002L SP10-3002L - SA15-3002L
267 kN

50 Ton
HL5002 60 122 - SP10-5002L - SA15-5002L
445 kN

100 Ton
HL10002 57 141 - SP10-10002L SP23-10002L SA15-10002L
890 kN

Lock Nut
Cylinders HLN5502 50 165 - - SP23-5502LN SA15-5502LN

55 Ton
HLN5504 100 213 - - SP23-5504LN SA15-5504LN
489 kN

HLN5506 150 264 - - SP23-5506LN SA15-5506LN

Aluminum
Cylinders HU3002 51 165 SP3-3002U - - SA15-3002U
30 Ton
267 kN
HU3006 152 267 - SP10-3006U - SA15-3006U

50 Ton
HU5506 152 267 - - SP23-5006U SA15-5006U
445 kN

+)LVILWWHGZLWK&50FRXSOHU

61
 )ORZ &RntrRO VaOveV 64 mm

700 BAR Rated

88 mm

32 mm

37 mm 64 mm

3/8” - 18NPTF
CVN1 and CVN3

37 mm 99 mm

70 mm
CVC3 38 mm 51 mm

75 mm
Ø 8 mm 41 mm
TYP OF 2
35 mm
19 mm

CVP3
3/8”-18 NPTF

Model
Valve Type Ports Applications Hydraulic Symbol
Number

CVN1 ¼"-18NPTF

Needle Controls cylinder speed and acts as temporary shut-

Valve off valve for load holding.
CVN3 "-18NPTF

Check Valve CVC3 "-18NPTF Allows Àow in one direction only.

Mounted in line with a cylinder which will hold pres-

Pilot sure in the event of pressure loss in the system. Most
Operated CVP3 "-18NPTF often used on double-acting cylinders with pilot port,
Check Valve receiving pressure from a tee off of the cylinder
retracting line. Pilot pressure ratio 15% or 6.5:1

62
 )ORZ &RntrRO VaOveV
700 BAR Rated

44 mm

77 mm
115 mm
3/8"-18NPTF

&95

Ø 38 mm
189 mm 3/8"-18NPTF

118 mm

122 mm

59 mm
CVL3
16 mm 16 mm
70 mm
26 mm 100 mm

118 mm

122 mm

58 mm

CVLS3 16 mm 16 mm

Control Valves / Accessories

70 mm 26 mm
100 mm

Model
Valve Type Ports Applications Hydraulic Symbol
Number
Controls pressure developed by the pump in hydraulic
loop. By-pass occurs when preset pressure reaches
CVR3 ”-18NPTF
0-10,000 PSI. Turn clockwise to increase pressure,
Pressure counter-clockwise to decrease.
Relief Valve
Same as CVR3, but return line hose / 1 meter length
CVR3/H ”-18NPTF
is included.

Mounted in line with a cylinder and will hold pressure in

CVL3 ”-18NPTF the cylinder in the event of pressure loss in the system.
Pressure is manually released.

Manual
Operated
Check Valve
Mounted in line with a cylinder and will hold pressure in
the cylinder in the event of pressure loss in the system.
CVLS3 ”-18NPTF
This model is equipped with high-pressure bypass. Pres-
sure is manually released.

63
 ManifROdV
700 BAR Rated 38 mm

1/4" - 20 UNC
6 mm Depth (x2)

21 mm
51 mm 41 mm

3/8"-18NPTF (x6)

203 mm
51 mm 76 mm 51 mm
CMH6 ؼ" (x2)
6 mm
3/8"-18NPTF (x7) 16 mm

16 mm
32 mm
57 mm 16 mm
32 mm 38 mm 38 mm 38 mm 32 mm
CM7 393 mm
83 mm 203 mm 83 mm
Ø 1/4" (x2)
6 mm

16 mm
102 mm 102 mm 102 mm
CM14 32 mm 32 mm

Ø 7 mm

13 mm

13 mm 127 mm

105 mm
3/8”-18NPTF (x3)
98 mm
25 mm

MFC2
41 mm 76 mm
38 mm
66 mm 152 mm

Ø 7 mm
13 mm

13 mm 279 mm
105 mm
98 mm

3/8”-18NPTF (x5)
25 mm

MFC4

76 mm 76 mm 76 mm
41 mm 38 mm
305 mm
66 mm

Manifold Model Number Mounting

Port Size
Type Number of Ports Holes
6-Port Hexagon Manifold CMH6 6 ǪƎ-18NPTF ¼Ǝ-20UNC
7Ǝ Long Manifold CM7 7 ǪƎ-18NPTF ¼Ǝ-20UNC
14Ǝ Long Manifold CM14 7 ǪƎ-18NPTF ¼Ǝ-20UNC
Manifold with Two Needle Valves MFC2 2 ǪƎ-18NPTF 0.28” Dia.
Manifold with Four Needle Valves MFC4 4 ǪƎ-18NPTF 0.28” Dia.

64
 +ydraXOiF PreVVXre *aXge

GBW1460

GD1480

Transparent tonnage sticker

GSW1460 GBW14100 available only for GBW14100

Graduation
Pressure Range
Face
Model Thread Major Minor Major Minor
Dia. Material
Number (in) Graduation Graduation Graduation Graduation
(mm) (psi) (bar)
(psi) (psi) (bar) (bar)
GBW1460 63 1/4"-18 NPTF Stainless 0-15000 0-1000 1000 500 100 20
GBW14100 105 1/4"-18 NPTF Brass 0-15000 0-1000 1000 500 100 20
GSW1460 63 1/4"-18 NPTF Brass 0-10000 0-700 1000 500 100 20
GD1480 80 1/4”-18 NPTF Stainless 0-10000 0-700 - - - -

*aXge AdaSter
B 700 BAR Rated
C

Control Valves / Accessories

D E F

A
CF3814

'

CF3814-45

Model Dimensions (mm)

Number A B C D E F
CF3814 130 35 ¼Ǝ-18NPTF ǪƎ-18NPTF ǪƎ-18NPTF 32
CF3814-F* 130 35 ¼Ǝ-18NPTF ǪƎ-18NPTF ǪƎ-18NPTF 32 CF3814-45
CF3814-45 55 - ¼Ǝ-18NPT ǪƎ-18NPT ǪƎ-18NPT 25
*CF314-F CF314 with internal oil-¿lter

65
 +ydraXOiF 2iO

• Recommended for all

BVA cylinders and pumps

Viscosity Viscosity Viscosity Flash Pour

Volume Model Viscosity
,QGH[ @ 40°C @ 100°C Point Point
(L) Number Grade, ISO
(mm2 / S ) (mm2 / S ) (°C) (°C)
5 HV155 159 15 3.89 15 160 -57 HV155
5 HV685 152 68 11 68 230 -42
HV685

([ternaO PreVVXre AdMXVtment

Sandwich Mounted
Pressure
Model Interval Suitable
Adj. Range
Number
(BAR)
(BAR) Model • Pressure can be adjusted
PW-AS1 PE Series, 3.8 L. Reservoir externally (70-700 bar)
70
PW-AS2 ~ 3.5 PE Series, 7.6 L (+). Reservoir
• Works with single and double
700 acting cylinders
PW-AS3 PU20 Series Pump

PW-AS1

PreVVXre 6ZitFh
CVS1

• Automatically shuts off electric pump when predetermined

system pressure is reached

Model Adjustable Weight

Electrical Rating Port Size
Number Pressure Range (kg)
CVS1 69~700.35 BAR 15 amp @ 250V max ¼"-18NPTF 0.6
CVS1

FRRt PedaOV
Single or Double

• Hands free pump operation

• Can be used with all pumps
equipped with solenoid valves

Foot controls with 3 meter cord. This option replaces the hand controls on solenoid equipped models.

CRXSOer 'XVt CRver

FP2
FP1 • Keeps contaminants out
of the system
CDC38
Model Coupler
Number Compatibility
CDC38 CH38, CH38F, CH38M

66
 +ydraXOiF CRXSOerV
10,000 PSI Rated
A G
G

EC H D C D C

F J B B
&450 CQF38F

A &5
G A
D
EC H D C
E C H D C
F J B J G
CQ38M CQ38F F

CH38
CH14 A
A D G
B
G
EC H D C
EC H D C
F J B
F J

0D[ Model Numbers Dimensions (mm)

Flow
Coupler Type Complete Male Female
Capacity A* B C D E F G H J
Set Half Half
(l/min)
35 High-Flow Coupler CH38 CH38M CH38F 85 72.1 3/8"-18NPTF 28 - 25.4 19 16 16
10 Regular-Flow Coupler CR38 CR38M CR38F 90 56 3/8"-18NPTF 26 - 18.5 12.7 13.5 13.5
8 High-Flow Coupler CH14 CH14M CH14F 71.9 59.7 1/4"-18NPTF 22 - 21 15.7 10.4 -
6 Quick Connection CQ38 CQ38M CQ38F 104.2 - 3/8”-18NPTF 28.1 24 - 22 44.9 20
6 Hose Rupture Nipple - CQR38M - 106.7 64.7 3/8”-18NPTF - - - 22 14.9 20
5.3 Flat Face Coupler - - CQF38F 116 71 3/8”-18NPTF 30 24 - - - -

* Value A is total length when male and female couplers are connected.

Control Valves / Accessories

+ydraXOiF +RVeV
Hose Exceeds DIN 20022-1 SAE 100R Speci¿cations

• Rubber Bend Restrictors.

• High Working Pressure.
• Optimum Flexibility. CS3838
• Light Weight.
• Temperature Range: from -40°C up to +100 °C.

POLYURETHANE CS3814
STEEL WIRE
ARAMID POLYAMIDE

Operating Bursting Ben oil

Model Length Hose End Weight
Number (cm) I.D. ø Fittings
Pressure Pressure Radius Volume
(kg)
(BAR) (BAR) (mm) (cc)
CS3814-1 100 6.35mm / 1/4” 3/8” - 18NPTF 700 2800 50 34 0.5
CS3814-2 200 6.35mm / 1/4” 3/8” - 18NPTF 700 2800 50 67 0.8
CS3814-3 300 6.35mm / 1/4” 3/8” - 18NPTF 700 2800 50 100 1.1
CS3814-4 400 6.35mm / 1/4” 3/8” - 18NPTF 700 2800 50 133 1.3
CS3814-6 600 6.35mm / 1/4” 3/8” - 18NPTF 700 2800 50 200 1.9
CS3814-10 1000 6.35mm / 1/4” 3/8” - 18NPTF 700 2800 50 332 3
CS3838-2 200 9.5mm / 3/8” 3/8” - 18NPTF 700 2800 150 158 0.8

* Available in other lenghts on request

67
 6ROenRid VaOveV
Pump Mounted
• Pump mounted solenoid kits convert your manual
pump to an electrically controlled pump.
PWS3

Use With Model Valve Valve Hydraulic Schematic Flow path Weight
Cylinder Number Type Function Symbol (kg)
Advance/
Solenoid 3.4
PWS3 Hold/Re-
Single 24 VDC
turn
Acting
Locking 4.7
PWS3L -
Plate
Advance/
Solenoid 3.9
PWS4 Hold/Re-
Double 24 VDC
turn
Acting
Locking 5.2
PWS4L -
Plate

PreVVXre CRntrRO VaOve

PPC-1/PPC-2

• Modular valve with one or two cartridges.

• Excellent pressure adjustment
over the entire operating range.

Valve Model Hydraulic

Number Symbol

PPC-1
Pressure
Control Valve
PPC-2

Flow Control
PFC
Valve

FORZ CRntrRO VaOve

PFC
• Throttle check valves

PXmS MRXnted ManifROd BORFN

CMR2

• Converts BVA pumps with mounted valves for use with remote
mounted valves
• 4 mounting bolts &05

68
 RemRte MRXnted 'ireFtiRnaO CRntrRO VaOveV
Not to be used with Hand Pumps

PR33, PR33C PR33L , PR33CL PR43, PR43C PR43CL

97 mm 114 mm 107 mm 114 mm

176 mm 176 mm
176 mm 176 mm

3/8”-18NPTF(x4)
3/8"-18NPTF (x3)
3/8”-18NPTF (x3)
156 mm 156 mm
107 mm 107 mm 1/4"-18NPTF (x4)
T
19 mm 19 mm
35 mm 35 mm 35 mm 19 mm 35 mm
19 mm
1/4”-20UNC (x4) 1/4"-20UNC (x4) 1/4”-20UNC(x4) 1/4”-20UNC (x4)"

Valve Valve Use w/ Model Hydraulic Weight

Schematic Flow path
Operation Type Cylinder Number Symbol (kg)

3-Way,
3 Position, PR33 1.59
Tandem center

3-Way,
3 Position, PR33C 1.59
Closed center

Single
Acting
3-Way,
3 Position,
Tandem center,
PR33L 2.59

Control Valves / Accessories

Locking

3-Way,
3 Position,
Closed center,
PR33CL 2.59
Locking

Manual

4-Way,
3 Position, PR43 1.59
Tandem center

4-Way,
3 Position,
Tandem center,
PR43L 2.59
Locking

Double
Acting

4-Way,
3 Position, PR43C 1.59
Closed center

4-Way,
3 Position,
Closed
PR43CL 2.59
center, Locking

All valves have a detent in the center position.

69
 PXmS MRXnted VaOveV
For PE, PG and PD Pumps Only
PW2
75 mm 162 mm
PW33L
142 mm

104 mm
3/8-18NPTF

24 mm 154 mm
158 mm

A
59 mm
44 mm 22 mm
118 mm

PW3 and PW4 PW43L

156 mm 144 mm 142 mm

3/8-18NPTF
98 mm
B A
158 mm 154 mm
24 mm

B A
83 mm 22 mm
44 mm

118 mm

Valve Valve Use w/ Model Hydraulic Weight

Schematic Flow path
Operation Type Cylinder Number Symbol (kg)

3-Way, Single
PW2 - 1.81
2-Position Acting

3-way,
3-Position, Single
PW3 1.81
Tandem Acting
center

4-Way,
3-Position, Double
Manual PW4 1.36
Tandem Acting
center

3-Way,
3-Position,
Single
Tandem PW33L 2.72
Acting
center,
Locking

4-Way,
3-Position,
Double
Tandem PW43L 2.72
Acting
center,
Locking

70
 FittingV
700 BAR Rated

Dimensions
Model
Fitting Type A B Display Image
Number C D
(mm) (mm)
Adapters
Adapter
Male Female B A
½Ǝ-14NPTF - Female FT108 43 29
ǪƎ-18NPTF ½Ǝ-14NPTF
ǪƎ-18NPTF - Male

Adapter
Male Female
½Ǝ-14NPTF - Female FT118 43 29
¼Ǝ-18NPTF ½Ǝ-14NPTF
¼Ǝ-18NPTF - Male D C

B A
Male Female
Fitting CA3814 35 23
¼Ǝ-18NPTF ǪƎ-18NPTF D C

Bushings/Connectors
B A

Male Female
Bushing CB1438 22 17
ǪƎ-18NPTF ¼Ǝ-18NPTF D C

B A

2 way 45° Connector

Male Female
Street Elbow, ǪƎ to ǪƎ- FT045 28 22
ǪƎ-18NPTF ǪƎ-18NPTF
NPTF
D
C

B A
2 way 90° Connector
Male Female
Street Elbow, ǪƎ to ǪƎ- FT101 28 22
ǪƎ-18NPTF ǪƎ-18NPTF D
NPTF
C

B A
2 way 90° Connector
Female Female
Elbow, ǪƎ to FT107 48 26

Control Valves / Accessories

D C
ǪƎ-18NPTF ǪƎ-18NPTF
ǪƎ - NPTF

B A
D
3 Way Connector Female Female
FT106 46 26
ǪƎ to ǪƎ - NPTF ǪƎ-18NPTF ǪƎ-18NPTF C

B A

C
4 Way Connector
Female Female
Cross, ǪƎ to FT105 36 26
ǪƎ-18NPTF ǪƎ-18NPTF
ǪƎ - NPTF
D

Couplings
Coupling Reducing Female Female B A
FT102 30 26
Connector, ǪƎ to ¼Ǝ - NPTF ¼Ǝ-18NPTF ǪƎ-18NPTF
Coupling Reducing Female Female
FT112 48 29
Connector, ½Ǝ to ǪƎ - NPTF ½Ǝ-14NPTF ǪƎ-18NPTF
Female Female
Coupling ǪƎ to ǪƎ- NPTF FT103 30 26 D C
ǪƎ-18NPTF ǪƎ-18NPTF
+H[1LSSOHV
Male Connector Hex Male Male
Nipple, ¼Ǝ to ¼Ǝ - NPTF
FT104 38 17
¼Ǝ-18NPTF ¼-18NPTF B A
Male Connector Hex Male Male
FT114 38 19
Nipple, ǪƎ to ǪƎ- NPTF ǪƎ-18NPTF ǪƎ-18NPTF
Male Connector Hex Male Male D C
FT124 37 19
Nipple, ¼Ǝ to ǪƎ- NPTF ¼Ǝ-18NPTF ǪƎ-18NPTF

71
 Page 1XmEer 
PreVVeV ReferenFe ,mage

Manual / Electric Press 74-77

Page 1XmEer 
BRttOe -aFNV  PXOOerV ReferenFe ,mage

Manual Bottle Jacks 78

Mini Jacks 78

Air/Manual Bottle Jacks 79

Toe Jacks 79

Pullers 80-88

Hydraulic Bench Vise 88

Bolt Puller / King Pin Press 89

Pad Eye Tester 90

72
 Page 1XmEer 
TRROV  (TXiSment ReferenFe ,mage

Flange Spreaders 91

Spreaders 91

Hydraulic Nut Splitters 92

Maintenance Kits 93

Pipe Bender 93

Container Lifting System 94

Container Moving System 95

Hydraulic Mounting Clamp 96

Movable Base Plates 97

Stabilisation 98-99

CrRVV ReferenFing and (ngineering Page 100

73
 +eavy 'Xty PreVVeV
Excellent for bending, bonding or straightening

• Multi-position bed for work height adjustment (A-B).

• Press bed of 50 Ton press moved by winch.
• Double speed pumps for fast ram moving without load.
• Cylinder can be re-positioned in width (M).
• Gauge indicates metric Tons.

Grid guard

61304

61504
Handwinch

74
 +eavy 'Xty PreVVeV
Excelent for bending, bonding or straightening

C 61504 B A

H W1

W
L W2

61154 61204 61304 61504

Shop Presses / Tools
Model A B C M L W W1 W2 H Weight
Capacity Stroke
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
15 Tons
61154 160 168 980 160 160 540 700 500 - 1727 92
133 kN
20 Tons
61204 185 35 912 176 176 540 730 510 - 1713 112
178 kN
30 Tons
61304 160 151 1031 200 200 700 795 535 - 1772 167
267 kN
50 Tons
61504 200 69 1048 245 245 800 1030 730 748 1830 298
445 kN

75
 +ydraXOiF ManXaO PreVV
With easy system for the hoisting of the working table

• The contra weight allows an effortless and fast positioning of the

working table ( ).
• Designed and developed for relieving the operator from
physical stress during hoisting of the working table.
• Supplied with double speed pump and a long hydraulic stroke
(200mm).
• Pump to be operated by foot or manually.

Model A B C D E W L Weight
Capacity
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
SMS3108 30 Tons 2050 1100 710 200 1150 150 650 300

SMS5108 50 Tons 2130 1200 810 200 1150 180 750 400

Punch Plate Arbor Plates

Moveable Cylinder

2StiRnaO ,temV

Open
Safety Guard
SAG51

Closed
Safety Guard
SAG51

Punch Set
SAP31/SAP51

Safety Practices
Good industry practice Adapter 15 20 25 30 35
recommends not exceeding mm mm mm mm mm
80% of maximum rated
capacities of all our products.

76
 (OeFtriFaO PreVV
Electrical Press with Remote Control

• New series of electrical presses with double acting cylinder.

• All presses are supplied with 2 “V” Arbor Plates and a punch
plate.
• A moveable Ram and winch to hoist the working table is in-
cluded with the presses.
• Remote control operation : easy and Àexible operation by
means of the remote control.

A1
D
A C F
EPD[.

SDE10013
B G

Model A A1 B C D E F G Weight
Cylinder Pump
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

SED5513 HD5513 PE0501 2000 2160 1580 785 335 1260 180 750 440

SED10013 HD10013 PE1002 2100 2210 1900 1025 333 1150 270 850 1220

(OeFtriFaO PreVV
Operating by: “Two” - hands

• Safe two hands operation.

• Flashing warning light - when operating.
Model A A1 B C D E F G Weight
Cylinder Pump
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

Shop Presses / Tools

SEC5513 HD5513 PE0501 2000 2160 1580 785 335 1260 180 750 440

SEC10013 HD10013 PE1002 2100 2210 1900 1025 333 1150 270 850 1220

SEC10013

Punch Plate Winch Arbor Plates

77
 ManXaO BRttOe -aFNV
12-50 Ton

• With easy adjustable extension screw [2-20 Tons].

• With rubber removable carry ring for easy storage of pump handle [2-20 Tons].
• Safety valve against over-loading.
• Bottle Jacks 8 Ton and more are supplied with a carry grip. D
W

C
L
F
B
E
A

Model A B C D E F L W Weight
Capacity
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
12 Tons
1412000 241 469 150 78 452 42 138 106 7.4
107 kN
20 Tons
1420000 249 475 150 76 452 76 160 150 12.9
178 kN
30 Tons
1430000 268 480 155 57 695 67 190 152 21.4
267 kN
50 Tons
10500 305 483 178 - 593 79 275 198 50.4
445 kN
100 Tons
10990 305 461 156 - 600 113 305 238 90.6
890 kN

Mini -aFNV
Compact
• Low pro¿le mini jack J11100
• Compact and lightweight J11050
• Convenient for storage 7KHVHPLQLMDFNVDUHOLJKWZHLJKWDQGZLOO¿WLQWKH Interchangeable
palm of your hand. saddle on model
J11050 and J11055
Minimum 0D[LPXP Hydraulic Base Size
Model Weight
Capacity Height Height Lifting /[:
Number (kg)
(mm) (mm) (mm) (mm)
5 Tons
J11050 71 79 20 104.14 x 101.6 2.1
44 kN
5 Tons
J11055 97 124 38 104.14 x 101.6 2.4
44 kN
10 Tons
J11100 122 160 41 124.46 x 111.76 5.7
89 kN
20 Tons J11050
J11200 130 173 41 137.16 x 121.92 7.6
178 kN

78
AirManXaO BRttOe -aFNV
12-100 Ton

• Air operation reduces operator fatigue and increases speed

• A compact/powerful air turbo motor (U.S. Patent No. 5,341,723) will raise
• the load to the desired height ef¿ciently, effortlessly and safely
• Hydraulic system is protected from internal damage by a patented
by-pass mechanism (U.S. Patent No.5,946,912)
• Versatile ƎQuick ConnectorƎ design provides easy removal of the air
hose from the air motor, allowing compact storage or remote operation

ØF

L W

Model A B C D E F L W Weight
Capacity
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
20 Tons
18202C 247 477 130 100 600 48 216 184 17
178kN
20 Tons
18206C 240 465 145 80 600 52 225 170 17.5
178 kN
30 Tons
17302C 280 458 180 - 965 62 260 210 27.5
267 kN

TRe -aFNV
Low Height

• Heat treated and chrome plated medium-carbon steel cylinder. Bottle Jacks
• Chrome plated plunger improves longer seal life and optimum
performance.
• U.S.Patented by-pass device protects hydraulic system from over
travel damage.
• Hydraulic system is protected from internal damage by a patented
by-pass mechanism (U.S. Patent No.5946912).

Toe Saddle Head Saddle Hydraulic Base Size

Model Weight
Capacity Min. Height 0D[+HLJKW Min. Height 0D[+HLJKW Lifting /[:
Number (kg)
(mm) (mm) (mm) (mm) (mm) (mm)
3 Ton / 27 kN J13060 15 147 229 358 130 152 x 112 16.4
6 Ton / 53 kN J13120 23 152 267 396 130 279x 191 24.9
10 Ton / 89 kN J13200 28 160 279 409 130 295 x 229 38.1
15 Ton / 133 kN J13300 28 168 333 472 130 318 x 274 52.9

79
 2 Leg AdMXVtaEOe PXOOer
Manual Pullers

• Adjustable in width.

Model A B C Weight
Capacity C
Number (mm) (mm) (mm) (kg)

AMP120310 3 Ton 100 95 134 1.1

AMP120315 3 Ton 100 135 176 1.3

AMP120720 7 Ton 150 160 223 3.5

AMP120725 7 Ton 155 190 250 3.6 A

AMP121230 12 Ton 205 240 325 7.5

AMP121235 12 Ton 200 350 425 9

B
AMP121240 12 Ton 200 510 585 15

AMP121550 15 Ton 225 640 717 23

23 Leg PXOOer

Manual Pullers

• Can be used with either 2 or 3 jaws.

• The extra long jaws are adjustable in 4 positions.
• The jaws have a special cut-out to pull.

Model Capacity A B Weight

Number (Ton) (mm) (mm) (kg)

AMP230110 1 120 125 0.7

AMP230410 4 210 220 2.1

AMP230710 7 270 280 3.7

A
The jaws have a special
cut-out to pull AMP230810 8 270 330 4.0

23 Leg PXOOer 6eOfCentering

Manual Pullers

Model Capacity A B Weight

Number (Ton) (mm) (mm) (kg)

AMPC230110 1 120 125 0.8

AMPC230410 4 210 220 2.1 A

AMPC230710 7 270 280 6.7

80
 PXVh PXOOer
C Manual Pullers

Model A %0D[ B Min. C Weight

Number (mm) (mm) (mm) (mm) (kg)

AMP221102 120 110 46 122 1

A AMP221103 120 140 46 156 1.1

AMP221110 190 195 62 210 3.4

B R

6SOitterV
Manual Pullers

Model $0D[ A Min. B R Weight

A
Number (mm) (mm) (mm) (mm) (kg)

APS1202 60 4 60 9.5 0.7

APS1203 80 6 80 9.5 1.3

APS1204 110 10 110 15.9 2.7

6SOitterV 6et
Manual Pullers

Model A B C
Number (mm) (mm) (mm)

AMP320202 100 55 90

AMP320303 100 80 130

AMP321004 152 108 175

B
C Pullers

Position to Pull Position to Split

Note: Be sure to use the correct position for the required action in order to avoid damaging the Splitter-Set.

81
 PXOOer 2 Leg C

Hydraulic Pullers (Excluding Cylinder)

• Pullers for Single Acting Cylinders.

A A

B W

Model Cylinder Capacity A B Min. %0D[ W W C Weight

Number (Optional) (Ton) (mm) (mm) (mm) (mm) (mm) (mm) (kg)

AP1205 H0503 5 160 60 200 175 270 260 8.5

AP(L) 1205
APL1205 H0503 5 220 60 200 175 270 260 9.0

Model Cylinder Capacity A B Min. %0D[ Weight

Number (Optional) (Ton) (mm) (mm) (mm) (kg)

AP2205 H0503 5 190 82 250 7.8

AP2205
6SOitterV

Model A Min. $0D[ L R e Weight

Number (mm) (mm) (mm) (mm) (mm) (kg)

APS1204 10 110 110 15.9 2.5 2.8

APS1206 12 134 155 15.9 2.0 5.7

R
R AP2205 + APS1204

e
A

APS1204

PXOOer 23 Leg

Ø 38mm

125
mm

Model Cylinder Capacity A %0D[ Weight

Number (Optional) (Ton) (mm) (mm) (kg)
A
AP1305 H0503 5 225 240 7.8 Ø 24
mm

AP1305

82
 PXOOer .it
(Excluding Cylinder)

Content:
Puller Capacity Weight • 2/3 Leg Puller
Kit (Ton) (kg)
• 2 Leg Puller
• Extensions for 2 Leg
Puller
2/3 Leg Puller 2 Leg Puller ([WHQVLRQ6HW Splitter
• Splitter
APK1005 5 AP1305 APL1205 APE1108+APE1118 APS1204 18

APS1204 APE1118 APE1108

AP1305
APL1205
Position to Pull Position to Split

Note: Be sure to use the cor-

rect position for the required
action in order to avoid damag-
ing the Splitter-Set.

+ydraXOiF 6et +ROORZ CyOinder

APH0503

Content:
• Handpump P350 Pullers
• Cylinder H0503
• Gauge and Gaulle
• Adaptor
• Hose
• Fitting and Coupler

Hydraulic Capacity Weight

Set (Ton) (kg)

Handpump Fitting Gauge + Adaptor Hose Coupler Cylinder

APH0503 5 P350 CA3814 GBW1460 + CF3814 CS3814-2 CH38-M H0503 8

83
 PXOOer 23 and 3 Leg Model Cylinder Capacity
Legs
A %0D[ Weight
Number (Optional) (Ton) (mm) (mm) (kg)
(Excluding Cylinder)
AP2310 HC1202 10 2/3 320 360 9

AP2320 HC2002T 20 3 320 480 23

AP2330 HC3002T 30 3 410 650 40

A AP2360 HC6003T 60 3 750 980 87

B APL2310 HC1202 10 2/3 400 410 9

APL2320 HC2002T 20 3 435 540 23

APL2330 HC3002T 30 3 525 720 40

APL2360 HC6003T 60 3 850 1080 87

6eOfCentering PXOOer 23 and 3 Leg

Model Cylinder Capacity A %0D[ Weight

Legs
Number (Optional) (Ton) (mm) (mm) (kg)

APC2310 HC1202 10 2/3 320 350 15

APC2320 HC2002T 20 3 320 480 33

APC2330 HC3002T 30 3 410 650 57

A
APC2360 HC6003T 60 3 750 980 122

B
APC2399 HC10003T 100 3 1050 1600 322

APLC2310 HC1202 10 2/3 400 410 16

APLC2320 HC2002T 20 3 435 540 36

APLC2330 HC3002T 30 3 525 720 63

APLC2360 HC6003T 60 3 850 1080 131

Application
Splitter Internal Puller

84
 PXOOer .it
Puller Kit Incl. 3-Leg Puller
Incl. Self-Centering Capacity (Excluding Cylinder)
3-Leg Puller (ton)
APK1010 APK1110 APK1210 10 Content:
APK1020 APK1120 APK1220 20 • Joining Nuts
• 2 Leg Puller
APK1030 APK1130 APK1230 30 • Extension Legs • Point Protection
• Splitter
APK1060 APK1160 APK1260 60
• Internal Puller • 2/3 Leg Puller
APK1099 - APK1299 100 (optional)

Joing Nuts
Point Protection

Extension
Legs Internal
2 Leg Splitter Puller
Pull Device

+ydraXOiF 6et +ROORZ CyOinder

Content:
• Handpump
• Hollow Cylinder
• Gauge and Gaulle
• Adaptor
• Hose
• Fitting and Coupler

Pullers
Hydraulic Capacity Weight
Set (Ton) (kg)

Handpump Fitting Gauge + Adaptor Hose Coupler Cylinder Saddle

APHC1202 10 P350 Incl. GBW1460 + CF3814 CS3814-2 CRZ14-M HC1202 - 10

APHC2002 20 P350 Incl. GBW1460 + CF3814 CS3814-2 CH38-M HC2002T APS20 15

APHC3002 30 P350 Incl. GBW1460 + CF3814 CS3814-2 CH38-M HC3002T APS30 18

APHC6003 60 P1000 - GBW1460 + CF3814 CS3814-2 CH38-M HC6003T APS60 46

APHC1003 100 P2301 - GBW1460 + CF3814 CS3814-2 CH38-M HC10003T APS100 73

85
 CRmSRVitiRn +ydraXOiF PXOOer .itV

Model Capacity Weight

Number (Ton) (kg)

3 or2/3 Leg Puller 3 or 2/3 2 Leg [([WHQGHU Internal Joining Point

Splitter
Self-Centering Leg Puller Puller Set Puller Nuts Protection
APE1120 +
APK1010 10 AP2210 APS1204 API1210 AJN05 APP10 35
PE1146
APE1220 +
APK1020 20 AP2220 APS1206 API1220 AJN10 APP20 60
APE1252
APE1333 +
APK1030 30 AP2230 APS1210 API1230 AJN30 APP30 120
APE1358
APE1550 +
APK1060 60 AP2250 APS1210D API1250 AJN50 APP30 215
APE1582
APE1550 +
APK1061 60 AP2250 APS1212 API1250 AJN50 APP30 230
APE1582
APE1120 +
APK1110 10 AP2310 (2/3 Leg) AP2210 APS1204 API1210 AJN05 APP10 44
APE1146
APE1220 +
APK1120 20 AP2320 (3 Leg) AP2220 APS1206 API1220 AJN10 APP20 83
1252
APE1333 +
APK1130 30 AP2330 (3 Leg) AP2230 APS1210 API1230 AJN30 APP30 160
APE1358
APE1550 +
APK1160 60 AP2360 (3 Leg) AP2250 APS1210D API1250 AJN50 APP30 302
APE1582
APE1550 +
APK1161 60 AP2360 (3 Leg) AP2250 APS1212 API1250 AJN50 APP30 317
APE1582
APE1120 +
APK1210 10 APC2310 (2/3 Leg) AP2210 APS1204 API1210 AJN05 APP10 50
APE1146
APE1220 +
APK1220 20 APC2320 (3 Leg) AP2220 APS1206 API1220 AJN10 APP20 93
1252
APE1333 +
APK1230 30 APC2330 (3 Leg) AP2230 APS1210 API1230 AJN30 APP30 177
APE1358
APE1550 +
APK1260 60 APC2360 (3 Leg) AP2250 APS1210D API1250 AJN50 APP30 349
APE1582
APE1550 +
APK1261 60 APC2360 (3 Leg) AP2250 APS1212 API1250 AJN50 APP30 364
APE1582

86
 Model Capacity A B Min. %0D[ Weight
Number (Ton) (mm) (mm) (mm) (kg)
3 Leg PXOOerV
AP2305 10 296 50 350 9

AP2320 20 230 70 480 23

A
AP2330 30 407 90 580 40

B AP2360 60 750 120 1080 87

3 Leg 6eOfCentering PXOOerV

Model Capacity A B Min. %0D[ Weight
Number (Ton) (mm) (mm) (mm) (kg)
APC2305 10 296 50 350 15
A
APC2320 20 230 70 480 33

APC2330 30 407 90 580 57

B
APC2360 60 750 120 1080 134

Model Capacity A B Min. %0D[ C

Number (Ton) (mm) (mm) (mm) (mm)
Weight
(kg)
2 Leg PXOOerV
AP2210 10 300 115 260 280 18.5

AP2220 20 265 140 345 370 34.7

A AP2230 30 284 180 440 480 56

AP2250 60 447 220 580 615 113.5

B

Model A1 A2 B Min. %0D[

C R1 R2
Weight ,nternaO PXOOerV
C Number (mm) (mm) (mm) (mm) (kg)
R1
R2 3/4”UNF 5/8”
API1210 115 237 40 145 133 2.0
16h 14h
1”UNF 5/8”
API1220 115 237 40 145 133 2.4
A2 8h 14h
1 1/4”UNF 1”
A1 API1230 150 310 60 240 202 6.0
7h 14h
1 5/8”UNS 1”
API1250 150 310 60 240 202 6.4
B 5.5h 14h

Model A Min. $0D[

Number (mm) (mm) (mm)
L R
(mm)
e
(mm)
Weight
(kg)
6SOitterV
R Pullers
APS1204 10 110 110 15.9 2.5 2.8

APS1206 12 134 155 15.9 2 5.7

A
R APS1210 17 250 260 25.4 4 28.5

e APS1210D 17 250 260 31.8 4 28.5

B
APS1212 35 300 300 31.8 4.5 43.5

Model L M ØD
R1 R2
Leg ([tenViRnV
Number (mm) (mm) (mm)
APE1120 180 100 16 5/8” - 18h 1/2” - 20h
R1 APE1220 209 89 25 5/8” - 18h 3/4” - 16h
APE1333 328 158 32 1” - 14h 1” - 14h
L
ØD APE1550 504 292 42 1 1/4” - 12h 1 1/4”-12h
M APE1146 230 150 16 5/8” - 18h 1/2” - 20h
APE1252 515 395 25 5/8” - 18h 3/4” - 16h

R2 APE1358 582 412 32 1” - 14h 1” - 14h

APE1582 820 608 42 1 1/4” - 12h 1 1/4” - 12h

87
 +ydraXOiF *ear PXOOerV
POSILOCK ® (Excluding Cylinder)

• Safety cage design prevents jaws from slipping

• Cylinders are removable for easy servicing
• Each puller includes a lift plate and
a ram point set

HGP503 HGP103 HGP053

HGP253 HGP153

Model Reach Spread Ram Jaw

Capacity Our Recommendation
Number (mm) Range (mm) Stroke (mm) Style This combination kit will work well with
5 Tons the hydraulic gear pullers. See our combo
HGP053 152 13- 203 127 External section for more details.
44 kN
10 Tons
HGP103 203 19 - 305 156 External
89 kN
15 Tons
HGP153 254 25 - 381 254 External
133 kN
25 Tons
HGP253 305 64 - 457 356 External
222 kN
25 Tons
HGP253IE 305 64 - 457 356 External/Internal
222 kN
50 Tons
HGP503 356 76 - 635 337 External
445 kN

+ydraXOiF BenFh ViVe

5 Ton Holding Force (Excluding Pump & Accessories)

• Hands free operation with foot

pump control
• Air control valve for variable
speed and added safety
• Cast steel construction 52,000
PSI tensile strength
• Hydraulic pressure closes jaws,
spring return opens jaws

Safety Instructions
Visit our DO¶S and DON¶TS
section to review the best
methods of operation.
pg102
Always be prepared.

Model Jaw Width Jaw Clearance Jaw Opening

Capacity
Number (mm) (mm) (mm)
5 Tons
HBV5 203 89 203
44 kN

88
BROt PXOOer.ing Pin PreVV
30 Ton & 60 Ton (Excluding Cylinder)

Bolt Puller/King Pin Press (excluding hydraulics).

Ideal for pushing King Pin and Stub Axle Pin replacement.
Mobile and easy to use in the ¿eld or workshop.

Pullers / Press
Model A B ØC D E F L Weight
Number (mm) (mm) (mm) (mm) (mm) (mm) (mm) (kg)
AP2239 420 288 75 370 92.1 118 750 36

AP2269 475 398 98 520 130.2 170 900 97

Hydraulic Set is not included

We recommend the following set:

Capacity Weight
(Ton) (kg)

Handpump Gauge + Adaptor Hose Coupler Cylinder Saddle

30 PA1500 GBW1460 + CF3814 C3814-2 CH38-M HC3002T APS30 18

60 PA1500 GBW1460 + CF3814 C3814-2 CH38-M HC6003T APS60 46

89
 Pad (ye TeVter
20 Ton (Excluding Cylinder)

Model Capacity A B C Weight

Number Ton (mm) (mm) (mm) (kg)
APPE20 20 225 225 225 24

• Pad Eyes are used to tie down loads on marine

vessels, trucks, doc sides, oil rigs and many
more applications.
• As Pad Eyes might be exposed to extreme loads
and therefore need to be tested to make sure
they are up to standard for the particular job.
• Our Pad Eye Testers are designed to test many
types of pad eyes.
210 mm

APPE20

Pad (ye TeVter

30 Ton & 60 Ton
Excluding Hydraulics

Model Capacity A B ØC Weight

Number Ton (mm) (mm) (mm) (kg)
APPE30 30 694 152 380 41

APPE60 60 796 203 380 68 APPE30

APPE30

90
 FOange 6Sreader
Pin Type (Including Cylinder)

Kit: SP3-3814

HFS05

HFS10

Model Stroke Oil Capacity Maximum Flange

• Designed for heavy duty industrial environment
Capacity
Number (mm) (cc) Thickness (mm)
• Adjustable jaw width for a wide range of applications
and easy use
5 Ton / 44 kN HFS05 25 16 51 X 58
• Spare wedge attachment is included
10 Ton / 89 kN HFS10 51 74 51 X 91

6SreaderV
• Designed to work in con¿ned work spaces
• Ideal for wedging, prying and opening
• High strength forged steel
• Spring return for easy operation

657
65 65

65 65 657

B B
3/8"- 18NPTF Spreaders
3/8"- 18NPTF
E C
D
CAPACITY
12 TON

A
A
C A
E
E C

Cylinder Oil Dimensions (mm)

Cylinder Model Weight
Effective Area Capacity
Capacity Number A B C D E (kg)
(cm²) (cc)
0.5 Ton 4.9 kN SR05 7.87 10 90 192 13 52 60 2.2

1 Ton 9.8 kN SR10 7.03 14 99 167 12 55 56 2.3

10 Ton 98 kN SR100T N/A N/A 16 235 7/17 50 37/47 3

91
 +ydraXOiF 1Xt 6SOitter Z CaVe
Compact and Heavy Duty

• Spacers include a straight chisel with a 60/40

angle, and works on all type of materials, including
stainless steel
• Chisel can be re-sharpened multiple times
• The aluminum Àight case also includes one spare
blade

Our Recommendation
This combination kit will work well with
this foot pump

P570FP pg 46

+H[DJRQ Oil Dimensions (mm) Replacement

Model Capacity Bolt Weight
Nut Range Capacity Blade
Number (Tons) Range A B C D E F G H K (kg)
(mm) (cc) Model Number

NS1319 6 M6-M12 13-19 11 40 190 7 19 121 28 55 48 57 NSB1319 1

NS1924 10 M12-M16 19-24 17 54 217 10 26 146 40 55 62 60 NSB1324 2
NS2432 15 M16-M22 24-32 40 64 245 13 29 178 51 55 72 71 NSB2432 3.2
NS3241 21 M22-M27 32-41 62 75 260 17 36 205 66 55 88 77 NSB3241 4.7
NS4150 34 M27-M33 41-50 123 94 310 21 45 244 74 55 105 90 NSB4150 8.5
NS5060 49 M33-M39 50-60 191 106 335 23 54 289 90 55 128 100 NSB5060 13
NS6075 93 M39-M48 60-75 650 156 410 26 72 365 110 55 181 124 NSB6075 34

BVA Bag
• Very practical for service people.
• For easy and comfortable carry/transport
of the equipment to the place of work
while keeping your hands free.

92
 MaintenanFe .itV
4, 10 Ton

• Sets are portable for ease of use on the job site

• Custom ¿tted, rugged blow molded storage case
• 10 ton set has wheels for easy transport
• Designed for pushing, spreading, pressing and more
50040

50100

Maintenance Kits
Pump Plunger
Capacity Model Number of Weight
Capacity Collapsed Height ([WHQGHG+HLJKW Effective Area
Number Attachments (kg)
(BAR) (cm) (mm) (cm²)
4 Tons
552 50040 70.97 258 6.44 14 21
36 kN
10 Tons
700 50100 87.94 324 15.56 13 36.7
89 kN
* When extension tubes and/or offset attachments are used, the capacity is reduced.

PiSe Bender
6615000 15 Ton

• Complete with 8 former attachments for a wide

variety of pipe diameters.
• Capable of bending high pressure/temperature
tubing as well as standard hydraulic, gas, steel,
aluminum and brass from 12.7mm up to 76.2mm,
with included attachments.
• Ram range: 251mm
• Max. working pressure: 700 BAR
• Product si]e 700x779x970 mm
• Weight: 82.8 Kg.

12,7mm 19,1mm 25,4mm 31,8mm 38,1mm 50,8mm 64mm 76,2mm

93
 CRntainer Lifting 6yVtem
To transport containers safely

• Easy to operate and simple to move around or to store.

• Replaces the expensive solution of renting a crane or other equipment to move or re-position (loaded)
containers.
• An (optional) cart (CLC) to easily move and position the corner blocks.
• A complete container lifting set contains:
- Cart to move corner blocks.
- 4 corner blocks with 25 Ton hydraulic cylinder.
- The necessary hoses, couplers and ¿ttings.
- Pump to operate the system.
• The set can be composed to your needs/requirements with air hydraulic, electric or gasoline/diesel pump.

Support
Plate

B C

Model A B C Weight
CLC
Number (mm) (mm) (mm) (kg)
CLS25 600 140 255 300
CLS25

94
 CRntainer MRving 6yVtem

• To safely and easily move containers around

inside or outside.
• Moves (loaded) containers up to 60 Ton.
• Twistlock for added safety and use on (slightly)
uneven surfaces.
(CMS 301/CMS 302 & CMS 201/ CMS 202)
• Fits all ISO-containers.
• Transport trolleys:
- CMS 151/CMS 201/CMS 301
tandem trolley with turntable for steering.
- CMS 152/CMS 202/ CMS 302

Container Systems

CMS151/ CMS201/ CMS301

CMS152/ CMS202/ CMS302

Model Capacity Wheels Ø Number H1 H2

Cone Use
Number (ton) (mm) of Wheels (mm) (mm)
CMS151 15 16 Indoor/Outdoor on
30 Ø 85 x 85 110 180 Welded
smooth Àoors
CMS152 15 16
CMS201 20 16 Twist Indoor/Outdoor on
40 Ø 140 x 59 215 300
Lock pavement
CMS202 20 16
CMS301 30 24 Twist Indoor/Outdoor on
60 Ø 140 x 59 215 300
Lock pavement
CMS302 30 24

95
 Ring MRXnting COamS+ydraXOiF

• For mounting of O-Ring and

Lock-Ring.
• To be used on tyre-si]e starting at
23.5” x 25”.
• 2 extension pieces for use up to 52”
are included.
• With Safety chain (to be attached to
wheel nut, Àange bolt or bolt hole).
• Complete set includes 2 x 5Ton
cylinders (H0509) and a control
column with an airhydraulic foot
pump.

+ydraXOiF MRXnting COamS

• Including accessories.
• For tires si]es 23.5” x 25” up to 52”.
• With a safety chain.
• Including 2 hydraulic cylinders H0509.

HMC0509

TranVSRrt and 6tRrage CaVe

• To store the mounting clamp and all
accessories.

HMC-Crate

CRntrRO CROXmn
• With air hydraulic foot pump PA1500.
• High pressure hoses CS3814.
• Manifold, couplers and ¿ttings.

HMCC1500

96
 MRveaEOe BaVe POateV
For Lifting Earth Moving Machine,
Reach Stacker and Straddle Carrier

CBM25
• Mobile base plate.
• Accomodates all single acting 25 Ton (H25...) cylinders.
CBM25 • Lifts 25 Ton in single and 50 Ton in parallel use.
• Includes double handle, elevation discs and saddle.

CBM50
• Mobile aluminum base plate.
CBM50
• Accomodates all single acting 50 Ton (H55..) cylinders.
• Lifts 50 Ton in single and 100 Ton in parallel use.
• Includes double handle and saddle.

Stabilisation
CBM100
• Mobile base plate.
CBM100 • Accomodates all single acting aluminum 100 Ton. (HU100...) cylinders.
• Lifts 100 Ton in single and 200 Ton in parallel use.
• Includes double handle and aluminum elevation discs.

Model A B C D E Weight
Number (mm) (mm) (mm) (mm) (mm) (kg)
CBM25 420 280 270 15 87 32

CBM50 700 500 400 15 130 25

CBM100 530 350 270 10 185 36

Related Product: Safety Practices

Stability Solutions Good industry practice
We offer Stabilisation recommends not exceeding
Blocks and Support Pads 80% of maximum rated
98 capacities of all our products.
pg

97
 6taEiOiVatiRn BORFNV
Stability solutions

• The stabilisation blocks are designed to provide superior crib stability

compared to standard products.
• Unlike wooden products, the stabilisation blocks do not splinter or
absorb Àuids, neither will fail catastrophically.
• Lightweight and easy to handle, with anti-slip layers.
• Instead of snapping, cracking or collapsing it gradually deforms providing
a visual warning of overload.

0D[/RDG&DSDFLW\
Stackability
Dimension (mm) (Ton)
Model Weight
Stabilisatioon Blocks Color
Number (kg) Height
Layer
A B C D (mm)

1 105
SB 001B Black 457 90 105 80 3.2
4 345
35 50
7 585
SB 001Y Yellow 457 90 105 80 3.2
10 825

1 175
SB 002B Black 610 152 178 150 11.3
4 625
100 150
7 1075
SB 002Y Yellow 610 152 178 150 11.3
10 1525

Interlocked Cribbing Height of the stability tower is limited to

Options ” 3x width of the base.

2 Stage 3 Stage

Wedge for SB 001 or SB 002

SW 001B Black 490 90 90 1.8

SW 002B Black 610 130 145 5.5

CriEEing Rn 6ROid *rRXnd

Stabilisation blocks are designed according to a

system of interlocking blocks. In this photo, we see SB
In this photo, we see SB 002B blocks set up for a 2 stage crib application. 002B blocks set up for a 3 stage crib application.

Safety First Safety Practices Safety First

Loads must be evenly spread When you are cribbing, do not mix
Good industry practice
over the cribbing blocks. Point- different blocks. The blocks need
recommends not exceeding
loading to be avoided. to be identical. Wedges should be
80% of maximum rated
aimilar width as crib block.
capacities of all our products.

98
 6XSSRrt PadV
Stability solutions

• The support pads are outrigger pads used for mobile

cranes, truck mounted cranes, aerial working platforms,
concrete pumps, containers, hydraulic jacks etc.
•
• Its purpose is to spread the weight over a larger surface
offering better support while also protecting the surface.

Model Dimension Weight Capacity

Support Pads Grip
Number (mm) (kg) (Tons)

SP 44410 1 400 x 400 x 40 6 10

SP 55415 1 500 x 500 x 40 9 15

SP 66420 1 600 x 600 x 40 14 20

SP 66625 1 600 x 600 x 60 20 25

SP 1010650 2 1000 x 1000 x 60 58 50

Other sizes/capacities available on request.

Stabalisation
6XSSRrt PadV
Stability solutions

• Ecological
• Light weight
• Easy to handle
• High durability
• High Àexibility
• Water-repellent
• Nearly unbreakable
• No rusting
• No Rotting

Safety Practices
Good industry practice
recommends not exceeding
80% of maximum rated
capacities of all our products.

99
 BVA CrRVV ReferenFe Chart
Compatibility Check

PoZer PoZer
Ton BVA (nerSaF +iForFe Ton BVA (nerSaF +iForFe
Team Team

Single Acting Cylinders H5502 RC-502 C552C HSS502

H0500 RC-50 - HFS51 H5504 RC-504 C554C HSS504

55
H5506 RC-506 C556C HSS506
H0501 RC-51 C51C HSS51
H5513 RC-5013 C5513C HSS5013
H0503 RC-53 C53C HSS53
5 H7506 RC-756 C756C HSS756
H0505 RC-55 C55C HSS55 75
H7513 RC-7513 C7513C -
H0507 RC-57 C57C HSS57
H10006 RC-1006 C1006C HSS1006
H0509 RC-59 C59C HSS59 100
H10010 RC-10010 C10010C HSS10010
H1001 RC-101 C101C HSS101
Threaded Cylinders
H1002 RC-102 C102C HSS102 HT1006 - C106CBT -
10
H1004 RC-104 C104C HSS104 HT1010 - C1010CBT -

H1006 RC-106 C106C HSS106 Aluminum Cylinders

10
H1008 RC-108 C108C HSS108 HU2002T RAC-202 RA202 -

20 HU2004T RAC-204 RA204 -

H1010 RC-1010 C1010C HSS1010
HU2006T RAC-206 RA206 -
H1012 RC-1012 C1012C HSS1012
HU3002 RAC-302 RA302 -
H1014 RC-1014 C1014C -
30 HU3004 RAC-304 RA304 -
H1501 RC-151 C151C -
HU3006 RAC-306 RA306 HAS306
H1502 RC-152 C152C HSS152
HU5002 RAC-502 RA552 -
H1504 RC-154 C154C HSS154 HU5004 RAC-504 RA554 -
50
H1506 RC-156 C156C HSS156 HU5006 RAC-506 RA556 HAS506
15
H1508 RC-158 C158C - HU5010 RAC-5010 RA5510 -

H1510 RC-1510 C1510C HSS1510 HU7504 - - -

75
HU7506 - - -
H1512 RC-1512 C1512C -
HU10002 RAC-1002 RA1002 -
H1514 RC-1514 C1514C -
700 HU10006 RAC-1006 RA1006 HAS1006
H2501 RC-251 C251C -
HU10010 RAC-10010 - -
H2502 RC-252 C252C HSS252
/RZ3UR¿OH&\OLQGHUV
H2504 RC-254 C254C HSS254
10 HL1001 RCS-101 RSS101 HLS101
H2506 RC-256 C256C HSS256
20 HL2002 RCS-201 RSS202 HLS201
25
H2508 RC-258 C258C HSS258 30 HL3002 RCS-302 RSS302 HLS302

H2510 RC-2510 C2510C HSS2510 50 HL5002 RCS-502 RSS502 HLS502

H2512 RC-2512 C2512C - 100 HL10002 RCS-1002 RSS1002 HLS1002

H2514 RC-2514 C2514C HSS2514 Flat Body Cylinders

HF0503 RSM-50 RLS50 HPS50
30 H3008 RC-308 - HSS308 5
HF0503B kit - - -
BVA ® is a registered trademark of SF Companies.
Enerpac® is a registered trademark of the Actuant Corporation. HF1005 RSM-100 RLS100 HPS100
10
Power Team® is a registered trademark of SPX Corporation.
HF1005B kit - - -
Simplex® is registered of the Actuant Corporation.

100
 BVA CroVV ReferenFe Chart
Compatibility Check

PoZer PoZer
Ton BVA (nerSaF +iForFe Ton BVA (nerSaF +iForFe
Team Team

HF2005 RSM-200 RLS200 HPS200 HD1010 RR-1010 RD1010 -

20 10
HF2005B kit - - - HD1012 RR-1012 - -

HF3005 RSM-300 RLS300 HPS300 HD3008 RR-308 - -

30 30
HF3005B kit - - - HD3014 RR-3014 RD2514 -

50 HF5006B RSM-500 RLS500S HPS500 HD5506 RR-506 RD556 HDA5506

75 HF7506 RSM-750 RLS750S HPS700 55 HD5513 RR-5013 RD5513 HDA5513

100 HF10006 RSM-1000 RLS1000S HPS1000 HD5520 RR-5020 RD5518 -

150 HF15006 RSM-1500 RLS1500S HPS1500 HD7506 RR-756 - -

75
Pull Cylinders HD7513 RR-7513 - -

2 HP0205 BRC-25 RP25 - HD10006 RR-1006 RD1006 HDA1006

100
5 HP0505 BRC-46 RP55 - HD10013 RR-10013 RD10013 HDA10013

10 HP1006 BRC-106 - -

Hollow Hole Cylinders

PoZer
HC1201T RCH-120 RH120 HHS101 BVA (nerSaF +iForFe
Team
HC1202T RCH-121 RH121 HHS102
12
HC1202XT RCH-1211 RH121T - Hand Pumps
HC1203XT RCH-123 RH123 - P601S P-39 P12 HP110

P1201S P-391 P55 -

HC2002T RCH-202 RH202 HHS202
20 P350 P-142 - HP211
RCH-206 RH206 HHS206

Cross-Referencing / Engineering
HC2006T
P1000 P-392 P59 HP212
HC3002T RCH-302 RH302 HHS302
30 P1201 P-77/P-80 - -
HC3006T RCH-306 RH306 HHS306 P2301 P-80 P159 HP227
HC6003T RCH-603 RH603 HHS603 P4301 P-801 P157 HP257
60
HC6006T RCH-606 RH606 HHS606 P8701 P-462 P460 HP245

100 HC10003T RCH-1003 RH1003 HHS1003 P2301M P-84 P157D -

P8701M P-464 P460D HP245D

Lock Nut Cylinders
P240L P-18 - -
HLN5502 CLL-502 R552L HFG502
Air Pumps
HLN5504 CLL-504 - -
PA600 PA-133 PA9 -
HLN5506 CLL-506 R556L HFG504
PA600H - PA9H -
55
HLN5508 CLL-508 - - PA1500 - PA6 -

HLN5510 CLL-5010 R5510L HFG506 PA1500L PARG-1102N PA6R -

HLN5512 CLL-5012 - - PA1500M - PA6DM -

PA2000 PATG-1102N - AHP1120

HLN10002 CLL-1002 R1002L -
PA3801 PATG-1105N PA6-1 AHP1121
HLN10004 CLL-1004 - HFG1004
PA3801L - - AHP1141
HLN10006 CLL-1006 R1006L HFG1006
100 PAR1703 - PA174 -
HLN10008 CLL-1008 - -
PAR4003 ZA4310MX PA462 -
HLN10010 CLL-10010 R10010L - PARD1701 - PA172 -
HLN10012 CLL-10012 - - PARD1703 - PA174 -

*For comparison purposes only. Products are not identical. To view complete cross over list go to www.BVA-hydraulics.com

101
 6afety ,nVtrXFtionV
Industry Safety Standards
6afety ,nVtrXFtionV
*eneraO • Read and understand all printed materials provided with and on this cylinder
• Do not exceed rated capacities
• Use only on hard level surface capable of sustaining the load
• Do not connect actuators to pumps with higher pressure ratings
• Always inspect hoses and connections for damage prior to use
• Keep hands and feet clear of work area
• LIFTING DEVICE ONLY! Immediately after lifting, support the load with appropriate means
• Use only manufacturer approved hydraulic Àuid
• A Àow-restricting component shall not be present between the relief valve and the tank
• No alterations shall be made to this cylinder
• Failure to meet these markings may result in injury and/or property damage
Ÿ
Do not override the factory setting of
• Each double-acting cylinder shall be ¿tted with a relief valve on the retract circuit, which
relief valves. Always use a gauge bleeds off the smaller effective area of the cylinder
to check system pressure.

CyOinderV

Ÿ Ÿ Ÿ
Provide a solid support for the entire cylinder The entire cylinder saddle must be in contact with Do not use cylinder without saddle. This will
base area. Use cylinder base attachment the load. Movement of the cylinder must be cause plunger to “mushroom” Saddles distribute
for more stability. parallel with the movement of the load. load evenly on the plunger.

Ÿ Ÿ Ÿ
As with jacks, never place any part of your Always protect cylinder threads for use with Keep hydraulic equipment away from open
body under the load. Load must be on attachments. ¿re and temperatures above 150°F (65°C).
cribbing before venturing under.

-aFNV

0 RXOe

*ood indXVtry
SraFtiFe reFommendV
Ÿ Ÿ
Provide a level and solid support for the Never place any part of your body under the not e[Feeding 0
entire jack base area. load. Ensure the load is solidly supported
before venturing under. of ma[imXm rated
FaSaFitieV
• Use only on hard, level surfaces
capable of sustaining the load.
• Immediately after lifting, support the
load with appropriate means
• Failure to meet these warnings may
result in personal injury as well as
property damage.

Ÿ Ÿ
The entire jack saddle must be in contact with Remove the jack handle when not in use.
load. Movement of the load must be in the
same direction as jack plunger.

102
 +ydraXOiF PXmS 6afety ,nVtrXFtionV
• 5($'$1'81'(567$1'$//:$51,1*6,16758&7,216$1'2:1(5¶60$18$/,1)250$7,21
%()25($77(037,1*7286(7+,6(48,30(17
• Burst ha]ard exists if hose or connection pressure exceeds rated pressure.
• Do not exceed the rated capacity of this device. Monitor pressure and load at all times.
• Verify load with calibrated load cell and indicator, accurate pressure gauge or equivalent devices.
• Inspect hoses and connections for damage prior to use. Never attempt to grasp a leaking pressuri]ed hose.
• Release the hydraulic pressure before disconnecting hoses or couplers, and before servicing the pump or accessory.
• Immediately after lifting, support the load with appropriate means. Never rely on hydraulic pressure to support a load.
• Wear protective clothing and eye protection that meets ANSI Z87.1 and OSHA standards when operating this equipment.
• Ensure that the chosen application is stable to work on and around.
• Do not subject the pump and its components to shock loads.
• Do not connect to applications which can return more oil to the reservoir than the pump reservoir can hold.
• Ensure that the rated pressure of all applications and ¿ttings is equal to or greater than the rated pressure of this pump.
• Keep hydraulic equipment away from Àames and heat.
• No alterations shall be made to this device.
• Failure to meet these warnings may result in personal injury as well as property damage.

PXmSV

(OeFtriF PXmS
6afety ,nVtrXFtionV
TO AVOID ELECTROCUTION HAZARD:
• Owner/Operator must read, understand and
follow all printed material provided with this
Ÿ Ÿ device before use.
Do not use handle extender. Hand pumps should Close release valve ¿nger tight. Using force will • Connect ONLY to properly grounded
be easy to operate when used correctly. damage the valve. electrical source. Connect to GFI outlet
ONLY! For use in dry locations.
• Avoid the use of extension cords. If used,
extension cord lengths up to 7 meter shall
be SJT-14X3 or heavier. For cords up to
15 meter, use SJT-12X3 or heavier.
• For extension cord lengths up to 30 meter,
use SJT-10X3 or heavier. NEVER use

Cross-Referencing / Engineering
a 3 prong adapter.
• Do not operate this device in an explosive
atmosphere or in the presence of
Ÿ Ÿ conductive liquids.
Fill pump only to recommended level. Fill only when Use only genuine BVA hydraulic oil. The wrong Àuid
connected cylinder is fully retracted. can destroy your seals and pump and will render
your warranty null and void.

+oVeV and CoXSOerV

Ÿ Ÿ Ÿ
Clean both coupler parts before connecting. Use Detach cylinder only when fully retracted or use Don¶t lift hydraulic equipment by the hoses.
dust caps when coupler parts are not connected. shut-off valves or safety valves to lock-in cylinder
pressure.

Ÿ Ÿ
Keep hoses away from the area Do not kink hoses. Bending radius
beneath loads. should be at least 4½". Do not drive
over or drop heavy objects on the
hoses.

103
 Maintaining <oXr (TXiSment
Ensure a longer life span of your equipment

Hydraulic Fluids
• Use only BVA Hydraulic Oil P/N¶s HV155 or HV685 for pumps and cylinders.

Air Line Lubricants

• Use Class 1 Turbine Oil (ISO VG32) for Air Line Lubricant

Hydraulic and Pneumatic Filtration

• Hydraulic Àuid must be kept clean, cool and free of water.
• Use Hydraulic Filtration to provide Àuid which meets ISO 17/15/12 cleanliness levels.
• Air Line Filtration for solid particulate contamination removal: Use BVA P/N FRL-145, 5uM Pneumatic Filter.
• Air Line Water Removal Use BVA P/N AD-145, Ambient Dryer.

Proper Operation of Equipment

• Refer to individual Product Owner¶s Manuals and BVA Catalogs for general information, speci¿cations, safe-
ty, set up, operation, maintenance, trouble shooting, storage and warnings for all BVA products.

FormXOaV

Key to Cylinder Plunger Speed

A
Measurements Formula ĺ V = × 60
Q
Cylinder Effective Area (cm2) 60 (sec)
Cylinder Plunger Speed (sec/cm2) = ×
3XPS)ORZ5DWHFP3/min) 1 (min)
Weight: Length

1 pound (lb.) =0.4536 kg 1 in =25.4 mm

Force
Formula ĺ F = P × A
Force (kg ) = Hydraulic Working Pressure (kg/cm2) × Cylinder Effective Area (cm2)
1 kg =2.205 lbs 1 mm =0.039 in

1 ton (short, US) =2,000 lbs 1 in² =6.452 cm²

Cylinder Oil Capacity
Formula ĺ C = A × L
1 ton (metric) =2,205 lbs 1 cm² =0.155 in²
Oil Capacity (cm3) = Cylinder Effective Area (cm2) × Cylinder Stroke (cm)

Volume: Pressure:
¼” Hose Oil Capacity
1 in³ =16.387 cm³ 1 psi (lb/in²) =0.69 bar Internal Diameter (mm2)
Formula ĺ C = 4 × × Length of Hose (m)
Oil Capacity (cm3) = 33 × Length of Hose (m)
1 cm³ =0.061 in³ 1 bar =14.5 psi

=61.02 in³ 1 kPa =0.145 psi Ǫ´+RVH2LO&DSDFLW\

1 liter Internal Diameter (mm2)
Formula ĺ C = 4 × × Length of Hose (m)
=0.264 gal(US)
Oil Capacity (cm3) = 72 × Length of Hose (m)

=3.785 liter Temperature:

Cylinder Effective Area
D2
Formula ĺ A = ×
1 gal (US, liquid) =231 in³ 0°F =(0°C x 1.8) + 32 4
(Cylinder Bore Diameter)2
Cylinder Effective Area = ×
4

=3,785 cm³ 0°C =(0°F - 32) · 1.8

= 3.14159265359

104
 ModeO 1XmEer ,nde[
Cylinders
H 6 HL 16 HLN 22 HP 26 HDG 32 Accessoires 40

HG 10 HF 18 HLNF 24 HPD 27 HDU 36

HU 14 HC 20 HT 25 HD 28 HDC 38
Pages 6-41

Pumps
Single Acting All Position Rotary Air 3-Phase
P 44 PA 47 PAR 50 PE 56
Hand Pumps Air Pumps Pumps Electric Pumps
Double Acting Single Acting Universal Motor Gas Engine
P 44 PA 48 PU 51 PG 57
Hand Pumps Air Pumps Pumps Pumps
Double Acting 1-Phase Diesel Engine
P57 Foot Pumps 46 PA 48 PE 52 PD 57
Air Pumps Electric Pumps Pumps
Pages 44-59

Combo Kits
H General Purpose Cylinder Combinations 60 HL Low Pro¿le Cylinder Combinations 61

HF Flat Body Cylinder Combinations 60 HLN Lock Nut Cylinder Combinations 61

HC Hollow Hole Cylinder Combinations 61 HU Aluminum Cylinder Combinations 61

Pages 60-61

Control Valves & Accessories

Flow Control 62 Gauge 65 Pressure 66 Hydraulic 67 Manifold 68 Fittings 71
Valves Adapters Switch Couplers Blocks

Manifolds 64 Hydraulic 66 Foot Pedals 66 Hydraulic 67 Directional

69
Oil Hoses Control Valves
Pressure 65 External 66 Coupler 66 Solenoid 68 Pump Mounted
70
Gauges Pressure Adj Dust Cover Valves Valves

Pages 62-71

Air/Manual Bottle Bolt Puller/

Presses/Bottle Jacks/Pullers
Heavy Duty Presses 74 79 89 BVA Bag 92
Jacks King Pin Press
Hydraulic
76 Toe Jacks 79 Pad Eye Tester 90 Maintenance 93
Manual Press

Electrical Press 77 Pullers 80 Flange Spreaders 91 Pipe Bender 93

Manual Bottle Jacks 78 Hydraulic Gear Pullers 88 Spreaders 91

Pages 74-93
Hydraulic Nut Splitter
Mini Jacks 78 Hydraulic Bench Vise 88 92
w/ Case

Tools/ Equipment

Container Lifting System 94 Hydraulic Mounting Clamp 96 Support Pads 99

Container Moving System 95 Movable Base Plates 97

Ring Mounting Clamp-Hydraulic 96 Stabilisation Blocks 98

Pages 94-99

Cross-Reference & Engineering

BVA Cross Reference Chart 100 Hydraulic Formula Reference 104

Safety Instructions 102 BVA in action 106

Maintaining Your Equipment 104 About BVA 107

© Copyright 2016 SFEU Companies

All rights reserved. Any copying or other use of the material in this catalog (text, illustrations, drawings, photos) without
prior express written consent is prohibited. Information in this catalog is subject to change without prior notice.
105
 BVA in aFtion

106
 AEoXt BVA

Shinn Fu Corporation was originally founded as Shinn Fu Auto Supply Company Ltd. by Mr. Michael Hung in
1971 based in Taipei, Taiwan. Shinn Fu has grown into the global leader of hydraulic lifting equipment in the
automotive aftermarket. The insistence of producing and offering only the highest quality products has earned
Shinn Fu a reputation for exceptional quality in the market.

Started in 1972, Shinn Fu Corporation started manufacturing hydraulic products for the professional and
consumer markets. In 2004 the company began manufacturing for the industrial market with BVA Hydraulics.
In 2009, due to substantial growth in the industrial market, the company expanded its facilities in Kansas City,
MO to better service the North American market.

Shinn Fu Europe B.V. (SFE) was established in 1994 in The Netherlands. With the objective of promoting and
distributing Shinn Fu¶s products in the markets of Europe, Middle East and Northern Africa, SFE launched the
Omega Lifting Equipment program in 1994. Since then, Omega has won the market¶s recognition.

Shinn±Chia Machinery & Foundry (Kunshan) Co., Ltd., a state-of-the-art Foundry, was established in June
1996, began with the casting production in July 1997, and added with the CNC machining processing
operations in December 2000. Shinn-Chia is privately owned by the Shinn Fu Group (Taiwan) at www.shinnfu.
com.

In order to provide the customers with excellent after-sales service, Shinn Fu has established worldwide
branch of¿ces in the USA, Canada, Australia, Hong Kong, Japan and Europe. SFE maintains the following
brands: BVA Hydraulics™, Omega Lift Equipment®, Omega Mechanix and Pro-Lift®
(http://www.shinnfu.com/index.php/about).

www.BVA-hydraulics.com for latest BVA information

Visit the BVA website:
• Learn more about BVA
• New products
• Electronic Catalogues
• Custom Solutions
• Trade shows
• Owner¶s Manual & Repair Parts
• Nearest Distributors & Service Centers

While every care has been taken in the preparation of this catalogue
and all data contained within is deemed accurate at the time of printing,
Shinn Fu does reserve the right to make changes to the speci¿cations of
any product, or discontinue any product, contained within this catalogue
without prior notice.

All illustrations, performance speci¿cations, weights and dimensions

Shinn Fu catalogue of
reÀect the nominal values and slight variations may occur due to
Omega Lift Equipment,
manufacturing tolerances. Please consult Shinn Fu if ¿nal dimensions
2PHJD 0HFKDQL[ DQG
are critical. All information in this catalogue can be changed due to
Pro-Lift to meet your
product improvements without prior notice.
needs:
© Copyright 2016, Shinn Fu. All rights reserved. Any copying or
To obtain your copy just
RWKHUXVHRIPDWHULDOLQWKLVFDWDORJXHWH[WLOOXVWUDWLRQVGUDZLQJV
give us a call, or visit our
SKRWRVZLWKRXWH[SUHVVZULWWHQFRQVHQWLVSURKLELWHG
Internet site.

107
 Cylinders

Contact Information

Europe
Pages 6-43
Shinn Fu Europe BV.
Address: Munnikenheiweg 50,
Pumps 4879 NG Etten-Leur,
The Netherlands
Email: [email protected]
Tel: 31-165-583-300
)D[ 31-165-583-310

Pages 44-63

Combo Kits Global Locations

Canada United States of America

Shinn Fu Company of Canada Shinn Fu Company of America

Address: 6355 Shawson Dr. Address: 10939 N. Pomona Ave.

Kansas City, MO 64153
Pages 64-65 Unit 1 Mississauga,
Tel: 888-332-6419
Ontario L5T 1S7 Canada
Tel: 1-905-362-2277 816-891-6390
)D[ 1-905-362-2280 )D[ 816-448-2142
Control Valves & Accessories Email: [email protected] Email: [email protected]

Australia Taiwan
Shinn Fu Company of Australia Shinn Fu Corporation Headquarters
Pages 66-75 Address: 15 Viewtech Place Address: 7F., No.408 Ruei Gaung Rd
Rowville, Victoria Nei Hu Disctrict Taipei City
3178, Australia 114 Tiawan R.O.C
Presses/Tools Tel: 61-3-9755-8277 Tel: 886-2-8751-7888
)D[ 61-3-9755-8219 )D[ 886-2-8741-7999
Email: [email protected] Email: [email protected]

Italy
Pages 76-83

Maintenance Kits/Bottle Jacks

Indirizzo: Via Vecchia Chimica, 10
20070 Cerro al Lambro (MI)
Tel: +39 02 9832954
Fax: +39 02 98119173
Email: [email protected]
Pages 84-89

Cross-Reference & Engineering

108