Scribd
Upload
426 views

Update Guide: Updating The Unit's Firmware

Uploaded by

jayapavan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
426 views

Update Guide: Updating The Unit's Firmware

Uploaded by

jayapavan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Manual Development Group

EN © 2019 Yamaha Corporation

Published 05/2019 YJ-A0

AV19-0002


Update Guide
This guide explains how to update the firmware in the unit using a USB storage device. Updating the unit’s firmware
For information on the improvements and additional features introduced by the firmware
update, refer to the product page for this unit on Yamaha’s website. You can update the firmware using the front panel.
Requirements for updating the firmware NOTICE
• Use a USB storage device that satisfies the following requirements: • Do not turn off the power to the unit during the update. Doing so may prevent the unit from starting up.
– Supports Mass Storage Class
– Features FAT16 or FAT32 format 1 Press z (power) to turn the power off.
– Does not feature the encryption function
– Contains no data (content is empty) 2 Insert the USB storage device into the USB jack.
• Use the firmware data downloaded from Yamaha’s website.
3 While pressing and holding down STRAIGHT, press z (power).
“ADVANCED SETUP” appears on the display.
Preparing the firmware
4 Press PROGRAM to select “UPDATE · · · · USB”.

1 Download the latest firmware for the unit from Yamaha’s website.
5 Press INFO (WPS).
For more information, refer to the product page for this unit on Yamaha’s website.
The firmware update starts. Do not turn off the power to the unit during the update.

2 Expand the downloaded compressed file, and then save the firmware data
file “000xxx-xxxx.bin” to the USB storage device.
6 When “UPDATE SUCCESS” appears on the display, press z (power) to turn
off the power to the unit.
Save the file in a folder at the highest level of the hierarchy (root folder) on the USB storage
device. Do not change the file name. 7 Remove the USB storage device from the USB jack.
The firmware update is complete.

NOTE
• Wait about five seconds after the firmware update is complete, and then turn on the power to the unit.
Viewing the firmware version
You can view the firmware version after the update is complete.

NOTICE
• Do not turn off the power to the unit during the update. Doing so may prevent the unit from starting up.

1 Press z (power) to turn the power off.

2 While pressing and holding down STRAIGHT, press z (power).


“ADVANCED SETUP” appears on the display.

3 Press PROGRAM to select “VERSION”.


The firmware version is displayed.

In case of an error
If an error message appears on the display during the update operation, the firmware will not be
updated correctly. Determine the cause, and try to update the firmware again.

Cause Solution

The USB storage device may not be properly Make sure that the USB storage device is connected
connected to the USB jack. properly. Then try to update the firmware again.

The firmware data file may not have been Make sure that the file has been stored in the folder on the
stored in the USB storage device properly. highest hierarchy (root folder) of the USB storage device.

The USB storage device may be protected by a Use a USB storage device that is not protected by a
password or other methods. password or other method.

You might also like