Scribd
Upload
1K views1 page

Drilling Pattern For HCR 1200 ED II: Dimensions in Inches

This document provides drilling pattern dimensions for an HCR 1200 ED II machine. It includes dimensions for the boom lift angle, boom slide, oscillating angle, and rotary angle in different drilling configurations, including vertical drilling on a horizontal plane and vertical drilling. Key dimensions shown are in inches and include distances between the machine center, boom swing center, and drill bit locations.

Uploaded by

SerkanAl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views1 page

Drilling Pattern For HCR 1200 ED II: Dimensions in Inches

This document provides drilling pattern dimensions for an HCR 1200 ED II machine. It includes dimensions for the boom lift angle, boom slide, oscillating angle, and rotary angle in different drilling configurations, including vertical drilling on a horizontal plane and vertical drilling. Key dimensions shown are in inches and include distances between the machine center, boom swing center, and drill bit locations.

Uploaded by

SerkanAl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Drilling Pattern for HCR 1200 ED II

Dimensions in Inches
Boom lift angle +0
Boom slide 1200
Oscillating angle 7.8 225.2 1.8
Rotary angle +90
11.9 66.3 90.3

12.3 10.4 17.5


16.2
R2
6.
R2 5
6.
5
8.5

Boom lift angle +45


9

Boom slide 0
Oscillating angle 2.5
Rotary angle 0

.1
22

Boom lift angle +17

21.8

33.8
Boom slide 1200
145.8

Oscillating angle 0
138.4

Rotary angle +90 R26.5


R1 Boom swing center

103.6
R1 30
22.
R21 8
4.2
35

R227

11.8
5
33.6

32.5

R26.5
25.4

6.5
14.8

R2

Machine center
Center of center shaft

13 80.8

13 93.5 118.3
Boom lift angle +45
Boom slide 0
Oscillating angle ＋2.5
Rotary angle +90

Vertical Drilling
on Horizontal Plane

Vertical Drilling

You might also like